481895
113
Zoom out
Zoom in
Previous page
1/214
Next page
111
4
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol (IPv4)
You can set the TCP/IP protocol that is commonly used for most of network system. It is recommended to
configure the TCP/IP protocol because TopAccess, the device management web-based utility, and e-Filing
web-based utility, that allows you to manage files in the e-Filing, will be available with the TCP/IP protocol.
Also other network features of this equipment use the TCP/IP protocol.
In the TCP/IP menu, you can select the addressing mode, assign the IP address, subnet mask, and
default gateway (if manually assigned).
How the TCP/IP protocol is configured is depending on the network configuration of your network.
When you assign the TCP/IP using the Auto-IP addressing or DHCP server:
If you do not know how the TCP/IP settings should be assigned, you can select Dynamic addressing
mode. When the Dynamic addressing mode is selected, this equipment will obtain the IP address,
subnet mask, default gateway, primary WINS server address, secondary WINS server address, POP3
server address, and SMTP server address from the DHCP server if the network supports the DHCP. If
the network does not support the DHCP, this equipment will assign the appropriate IP address using
the Auto-IP addressing. However, the Auto-IP addressing may not work properly when the router is
placed in the network.
P.111 “Setting the TCP/IP for Auto-IP and DHCP Server”
When you assign the TCP/IP using the DHCP server only:
If your local area network has been configured with the DHCP server and you do not want to enable
the Auto-IP addressing, you can select No Auto-IP addressing mode. When the No Auto-IP address-
ing mode is selected, the IP address, subnet mask, default gateway, primary WINS server address,
secondary WINS server address, POP3 server address, and SMTP server address will be automati-
cally obtained from the DHCP server, and the Auto-IP addressing will be disabled. To enable the
DHCP addressing only, please configure the TCP/IP settings as described in following procedure.
P.113 “Setting the TCP/IP for DHCP Server Only”
When you connect to local area network where the static IP addresses are used:
If your local area network has been configured with the static IP address, you must assign the specific
IP address, subnet mask, and default gateway as required.
P.114 “Setting the TCP/IP for Static IP Address”
Setting the TCP/IP for Auto-IP and DHCP Server
1
Press the [NETWORK] button in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.91
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 603 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 603

Toshiba e-STUDIO 603 User Manual - English - 368 pages

Toshiba e-STUDIO 603 User Manual - German - 96 pages

Toshiba e-STUDIO 603 Quick start guide - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info