681691
319
Zoom out
Zoom in
Previous page
1/322
Next page
Networking Documents.
Document
Manager
Operator’s Manual for
Basic Function
EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the ENERGY
STAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an ENERGY STAR Partner, the TOSHIBA
TEC CORPORATION has determined that this copier model meets the ENERGY STAR guidelines for energy
efficiency.
ENERGY STAR guidelines for this class of copier require ENERGY STAR copiers to have an ‘Off Mode’ feature
that automatically turns the copier off after a period of inactivity, ensuring night and weekend shutoff. The copier
must also automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the
last usage.
For Copier/Printer + Fax models, ENERGY STAR guidelines for this class of copier require ENERGY STAR
Multifunction copiers to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode
after a period of inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy
Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
e-STUDIO350/450 Copier model (Base model)
‘Automatic Energy Save’-
The copier consumes less than 139.75 watts (e-STUDIO350)/178.25 watts (e-STUDIO450) during Energy
Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Off Mode’
The copier consumes less than 15 watts (e-STUDIO350)/20 watts (e-STUDIO450) in the ‘Off Mode’.
‘Off Mode’ Default Time-
The default time for the ‘Off Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
e-STUDIO350/450 Copier/Printer + Fax model (Multifunction model)
‘Automatic Energy Save’-
The copier consumes less than 184.75 watts (e-STUDIO350)/223.25 watts (e-STUDIO450) during Energy
Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Sleep Mode’
The copier consumes less than 80 watts (e-STUDIO350)/95 watts (e-STUDIO450) in the ‘Sleep Mode’.
‘Sleep Mode’ Default Time-
The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
Note1- The default setting for the ‘Off Mode’ or ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed.
Note2- For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts
warming itself up and prints out the data when it becomes ready. Also, when the start button or the
energy saver button on the control panel is pressed, the copier starts warming itself up.
Note3- For Base model, the copier automatically shuts off in off mode. To use the copier again, turn the power
switch on.
Note4- For Base model, after an automatic shutoff, weekly timer feature cannot be activated. If you prefer to
activate this feature, contact you authorized Toshiba dealer.
In accordance with EPA ENERGY STAR programme guidelines, Toshiba recommends the following recycled
paper.
Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
ENERGY STAR is a U.S. registered mark.
HUD_PPC_EU.book Seite I Sonntag, 13. Februar 2005 2:57 14
1
TABLE OF CONTENTS
NOTICE TO USERS................................................................................................................................5
TOSHIBA QUALITY IS SECOND TO NONE ..........................................................................................6
PREFACE................................................................................................................................................8
FEATURES OF THE e-STUDIO350/450.................................................................................................9
GENERAL PRECAUTIONS...................................................................................................................10
When Installing or Moving .....................................................................................................................10
When Using the Multifunctional Digital Systems................................................................................13
During Maintenance or Inspection .....................................................................................................15
When Handling Supplies....................................................................................................................16
DISCLAIMER NOTICE..........................................................................................................................17
1. BEFORE USING EQUIPMENT.............................................................................................................19
1. DESCRIPTION OF EACH COMPONENT.......................................................................................20
Main Components..........................................................................................................................20
Optional Equipment.......................................................................................................................21
Control Panel.................................................................................................................................23
Adjustment of the Angle of the Control Panel................................................................................25
Touch Panel...................................................................................................................................27
2. TURNING ON THE POWER SWITCH ............................................................................................30
Turning on/off the Power................................................................................................................30
Controlling the Use of the Copier with Department Codes............................................................32
3. SWITCHING TO THE ENERGY-SAVING MODE............................................................................33
4. DATA OVERWRITE KIT (OPTIONAL).............................................................................................34
2. HOW TO MAKE COPIES......................................................................................................................35
1. SETTING COPY PAPER .................................................................................................................36
Acceptable Copy Paper Types and Sizes......................................................................................36
Toshiba-Recommended Paper/Handling and Storing Paper.........................................................37
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses..............................38
2. SETTING ORIGINALS.....................................................................................................................45
Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored...............45
When Placing an Original on the Glass.........................................................................................46
When Using the Reversing Automatic Document Feeder (optional) .............................................48
3. GENERAL COPYING PROCEDURES............................................................................................51
4. AUTO JOB START (JOB PRESET).................................................................................................54
5. INTERRUPT COPYING...................................................................................................................56
6. STOPPING THE COPY OPERATION.............................................................................................57
7. BYPASS COPYING .........................................................................................................................58
Bypass Copying.............................................................................................................................58
3. SETTING OF BASIC COPY MODES....................................................................................................65
1. PAPER SELECTION........................................................................................................................66
Automatic Paper Selection (APS)..................................................................................................66
Manual Paper Selection.................................................................................................................68
Setting the [OTHER SIZE] button..................................................................................................69
Setting the [MIXED ORIGINAL SIZE]............................................................................................70
2. REDUCTION AND ENLARGEMENT COPYING.............................................................................72
3. SELECTING FINISHING MODES ...................................................................................................76
Finishing Modes and Finishers (Optional).....................................................................................76
Sort/Group Copying.......................................................................................................................79
Rotate Sort Mode...........................................................................................................................80
Staple Sorting................................................................................................................................81
Magazine Sort & Saddle Stitch Mode (Booklet Mode)...................................................................83
Hole Punch Mode (Optional) .........................................................................................................86
4. DUPLEX COPYING.........................................................................................................................88
HUD_PPC_EU.book Seite 1 Sonntag, 13. Februar 2005 2:57 14
2
TABLE OF CONTENTS (Cont.)
For Making 1-sided, 2-sided and Book-type Copies......................................................................88
5. ORIGINAL MODE............................................................................................................................94
6. COPY DENSITY ADJUSTMENT.....................................................................................................95
4. IMAGE EDITING AND IMAGE ADJUSTMENT....................................................................................97
1. BACKGROUND ADJUSTMENT......................................................................................................98
2. SHARPNESS ADJUSTMENT..........................................................................................................99
5. USING THE EDITING FUNCTIONS....................................................................................................101
1. IMAGE SHIFT................................................................................................................................102
2. EDGE ERASE................................................................................................................................105
3. BOOK CENTRE ERASE................................................................................................................106
4. DUAL-PAGE ..................................................................................................................................107
5. 2 IN 1/4 IN 1...................................................................................................................................109
6. MAGAZINE SORT (FROM THE EDITING MENU)........................................................................111
7. IMAGE EDITING............................................................................................................................113
Trimming/Masking .......................................................................................................................113
Mirror Image ................................................................................................................................115
Negative/Positive Reversal..........................................................................................................116
8. X-Y ZOOM .....................................................................................................................................117
9. COVER COPYING.........................................................................................................................118
10. SHEET INSERTION MODE...........................................................................................................121
11. TIME & DATE STAMP....................................................................................................................123
12. PAGE NUMBERING ......................................................................................................................124
13. JOB BUILD ....................................................................................................................................126
14. DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1” .........................................................129
15. DIRECTION OF DUPLEX COPY IMAGES IN “2 TO 2”.................................................................131
16. CONTINUOUS/SINGLE ORIGINAL FEEDING .............................................................................132
6. STORING ORIGINALS .......................................................................................................................135
1. STORE TO e-FILING.....................................................................................................................136
2. COPY & FILE.................................................................................................................................139
3. ENTERING LETTERS ...................................................................................................................142
7. SCANNING THE IMAGES..................................................................................................................143
1. SCAN SETTING IN THE TOUCH PANEL .....................................................................................144
2. SCAN TO e-FILING .......................................................................................................................146
3. SCAN TO FILE ..............................................................................................................................150
4. SCAN TO E-MAIL..........................................................................................................................154
8. INTERNET FAX...................................................................................................................................159
1. INTERNET FAX .............................................................................................................................160
2. SENDING INTERNET FAX............................................................................................................162
Setting the Transmission Conditions ...........................................................................................162
Specifying the Recipients ............................................................................................................165
Advanced Function......................................................................................................................176
3. RECEIVING INTERNET FAX ........................................................................................................179
9. JOB STATUS ......................................................................................................................................181
1. JOB STATUS .................................................................................................................................182
2. PRINT JOB LIST............................................................................................................................183
3. PROOF PRINT JOB ......................................................................................................................186
4. PRIVATE PRINT JOB ....................................................................................................................188
5. WHEN USING THE DEPARTMENT CODES................................................................................190
6. CONFIRMING THE STATUS OF FAX/INTERNET FAX JOB ........................................................192
HUD_PPC_EU.book Seite 2 Sonntag, 13. Februar 2005 2:57 14
3
7. CONFIRMING THE STATUS OF SCAN........................................................................................193
8. LOG LIST.......................................................................................................................................194
9. ADDRESS REGISTRATION FROM LOG LISTS...........................................................................197
10. PRINTING SEND/RECEIVE LOG LIST OF FAX...........................................................................199
11. STATUS .........................................................................................................................................200
12. ERROR CODE...............................................................................................................................202
10.e-FILING .............................................................................................................................................213
1. e-FILING FUNCTIONS..................................................................................................................214
2. SETTING UP BOX.........................................................................................................................216
3. CHANGING INPUT DATA..............................................................................................................218
4. DELETING BOX ............................................................................................................................220
5. DELETING FOLDER .....................................................................................................................221
6. DELETING DOCUMENT ...............................................................................................................223
7. PRINTING STORED DOCUMENT................................................................................................225
11.TEMPLATE .........................................................................................................................................229
1. TEMPLATE ....................................................................................................................................230
2. RECALLING TEMPLATE...............................................................................................................231
3. REGISTERING TEMPLATE ..........................................................................................................234
4. CHANGING INPUT DATA..............................................................................................................240
5. DELETING TEMPLATE .................................................................................................................245
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL ...............................................249
1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS...........................................................250
2. ADD PAPER SYMBOL ..................................................................................................................252
Adding Paper to the Drawers.......................................................................................................252
Adding Paper to the Large Capacity Feeder (Optional)...............................................................253
3. REPLACE TONER CARTRIDGE SYMBOL...................................................................................254
4. REPLACE TONER BAG SYMBOL................................................................................................258
5. CLEAR PAPER SYMBOL..............................................................................................................259
6. ADDING STAPLES (OPTIONAL)...................................................................................................273
7. REMOVING JAMMED STAPLES (OPTIONAL).............................................................................279
8. DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL).......................................................286
9. CALL SERVICE SYMBOL/PERIODIC MAINTENANCE MESSAGE.............................................287
13.MAINTENANCE..................................................................................................................................289
1. DAILY INSPECTION......................................................................................................................290
2. SIMPLE TROUBLESHOOTING.....................................................................................................292
14.SPECIFICATIONS & OPTIONS..........................................................................................................297
1. e-STUDIO350/450 SPECIFICATIONS ..........................................................................................298
2. SPECIFICATIONS OF OPTIONS ..................................................................................................301
3. PACKING LIST ..............................................................................................................................309
4. COPYING FUNCTION COMBINATION MATRIX ..........................................................................310
Combination Matrix 1/2................................................................................................................310
Combination Matrix 2/2................................................................................................................311
HUD_PPC_EU.book Seite 3 Sonntag, 13. Februar 2005 2:57 14
4
HUD_PPC_EU.book Seite 4 Sonntag, 13. Februar 2005 2:57 14
5
NOTICE TO USERS
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Working environment
This product and original electric accessories are designed to fulfill the EMC (Electromagnetic
Compatibility) requirements for “commercial and light industry environments”.
TOSHIBA TEC does not approve the use of this product in working environments other than “commercial
and light industry environments”.
As example, the following environments are not approved:
Industrial Environments (e.g. environments where a mains voltage of 380V three-phase is being used).
Medical Environments: This product is not certified as a medical product according to the Medical
Product Directive 93/42/EEC.
Residential environments (e.g. a private living room with TV / Radio sets in the nearby surrounding
area)
Any consequences resulting from the use of this product in working environments that are not approved
or the use is restricted are not the responsibility of TOSHIBA TEC.
The consequences of the use of this product in those working environments may be an electromagnetic
interference with other devices or machines in the nearby surrounding area. This can result into
malfunction including data loss / data error pertaining to this product or the other devices / machines
involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with explosive
atmospheres is not permitted.
1 Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2 Before opening any covers or removing any parts from the copier, discharge the static electricity
from your body by touching a metal part of the copier. This product is labelled with the CE mark
in accordance with the provisions of the applicable European Directives, notably the Low Voltage
Directive 73/23/EEC, the Electromagnetic Compatibility Directive 89/336/EEC for this product and the
electric accessories, the Radio Equipment and Telecommunications Terminal Equipment Directive
99/5/EEC for the telecommunication accessories.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH,
Carl-Schurz-Str. 7, 41460 Neuss, Germany, phone +49-(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity please contact your dealer or TOSHIBA TEC.
E-mail: customerservice@toshibatec-tgis.com
Machine Noise Information
Ordinance3. GPSGV: The maximum sound pressure level is equal to or less than 70dB(A) according
to EN ISO7779.
After a suitable place has been selected for the installation of the e-STUDIO, please do not change it.
Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the copier
emits a small amount of ozone.
HUD_PPC_EU.book Seite 5 Sonntag, 13. Februar 2005 2:57 14
6
TOSHIBA QUALITY IS SECOND TO NONE
e-STUDIO350/450 Toner Cartridges.
It is recommended that genuine TOSHIBA supplies and parts be used to obtain optimum results.
HUD_PPC_EU.book Seite 6 Sonntag, 13. Februar 2005 2:57 14
7
Supplies/Parts
- Dependability
Genuine Toshiba supplies are subjected to the strictest of inspections so that every supply you receive
will perform at optimal levels.
- High Productivity
Genuine Toshiba supplies are created to meet the demands of our competitive world and provide high-
speed reliable trouble-free copies when you need them.
- Stable Image Quality
Genuine Toshiba supplies are designed to provide consistently stable image output.
-Copier Kind
Genuine Toshiba supplies are designed to keep the copier and all its parts in trouble-free working order.
Reduction of machine wear is due to Toshiba's intimate knowledge of the copier's characteristics ensuring
the highest standard of care.
- Machine Balance
From the beginning Toshiba supplies and machines were made for each other. Whenever Toshiba
designs a new machine, it also designs a new toner that is made just for that machine. By using Genuine
Toshiba supplies with Toshiba copiers, you are guaranteed optimum performance.
Toner
- Optimum image Quality
Toshiba toner is manufactured using ultra-fine quality materials under precisely controlled conditions to
ensure that your Toshiba copiers will continually generate sharp high-quality images.
- Cost Advantage
Genuine Toshiba toner provides value. Only the proper amount of toner is used during the reproduction
process thereby enabling the machine to continue to operate until all the toner has been used. In this way
you get the full value from each cartridge used.
- Environmental Harmony
Genuine Toshiba toner is manufactured with the environment in mind. To care for Mother Earth, we use
embossed or plastic labels making our toner fully recyclable. In addition, harmful dust and ozone levels
have been reduced to improve the working environment.
- User Friendly
Genuine Toshiba toner is people-friendly. Before approving our toners for sale, we test them to be sure
that they pass the strictest of health standards. This takes the worry out of handling the toner.
General
-ISO 9000 and ISO 14000
Toshiba TEC toner plants are ISO 9001 or ISO 14001 certified. Our toners are of the highest quality and
are environmental friendly.
- Service and Support Benefits
Toshiba's Service engineers are certified to keep your copier performing at optimum levels.To ensure
continuous image quality, utilize an authorized Toshiba Service provider to care for and perform periodical
maintenance on your copier.
HUD_PPC_EU.book Seite 7 Sonntag, 13. Februar 2005 2:57 14
8
PREFACE
Thank you for purchasing the Toshiba Multifunctional Digital Systems e-STUDIO350/450. This Operator’s
Manual describes the following:
- How to use the Multifunctional Digital Systems.
- How to inspect and carry out maintenance on the Multifunctional Digital Systems.
- How to remedy mechanical and copying problems.
Before using the Multifunctional Digital Systems, thoroughly read and understand this Operator’s Manual.
To ensure that clean copies are made at all times and to keep your Multifunctional Digital Systems in
optimum working order, this Operator’s Manual should be readily available for future reference.
To ensure correct and safe use of the Toshiba Multifunctional Digital Systems e-STUDIO350/450, this
Operator’s Manual describes safety precautions according to the following three levels of warning:
Before reading this Operator’s Manual, you should fully understand the meaning and importance of these
signal words.
-Warning
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or
serious damage, or fire in the equipment or surrounding assets.
-Caution
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury,
partial damage of the equipment or surrounding assets, or loss of data.
-Note
Indicates a procedure you should follow to ensure the optimal performance of the Multifunctional Digital
Systems and problem-free copying.
-Tip
Describes handy information that is useful to know when operating the Multifunctional Digital Systems.
-Advice
Describes an operation you should follow to keep the Multifunctional Digital Systems in good working
order.
HUD_PPC_EU.book Seite 8 Sonntag, 13. Februar 2005 2:57 14
9
FEATURES OF THE e-STUDIO350/450
The e-STUDIO350/450 is a Multifunctional Digital System that is capable of using each function via
networks. The e-STUDIO350/450 also has various optional paper handling devices to meet the needs of
your office.
The e-STUDIO350/450 offers the following convenient features, functions and options.
- The copying speed is 35 copies (A4) per minute for e-STUDIO350, 45 copies (A4) per minute for the e-
STUDIO450.
- Warm-up time has been drastically shortened to approximately 20 seconds.
- An all-in-one controller is installed to perform the effective network functions.
(To use the print, scan and Internet Fax functions, optional printer kit, scanner upgrade kit, printer/scanner
kit, etc. are required.)
- The input/output interface is designed for internet connection (access) environment.
- A 1/2 VGA wide panel improves operability and efficiency.
- A universal design is adopted for the control panel whose angle can be changed.
- The e-Filing function allows you to scan, save, reuse, and re-edit the original data via client PCs from the
scanning section.
- Received Fax documents can be stored in the e-Filing without printing them.
(Optional FAX board is required.)
- Scanned originals can be sent via Fax and E-mail simultaneously.
(To send them via Fax, optional FAX board is required. To send them vial E-mail, optional printer/scanner
kit or both printer kit and scanner kit is required.)
- Electric sorting improves copying productivity.
- Comes with rich editing functions such as trimming, masking and mirror.
- Loading the page memory and hard disc as standard equipment enables 2 in 1/4 in 1, Electronic sorting
and magazine sorting, etc.
- A fixing system that uses less oil reduces the amount of oil affixed to the paper.
- By simply replacing the cartridge, you can add toner without dirtying your hands.
- A wide variety of media from thick paper (up to 209 g/m2), sticker labels, OHP films, etc. is acceptable.
- Installing an optional finisher offers quick automatic sorting, stapling and hole punching (optional) of
copies.
- Installing a finisher with an optional saddle stitching function attached allows you to select the saddle
stitching mode which will automatically staple the centre of the documents just like a book.
- When configured as a copier only, the auto shutoff feature will turn off the power switch on the machine.
When the optional printer/scanner kit, both printer kit and scanner upgrade kit, or Fax board is installed,
the machine will enter a Sleep mode and will re-activate when a job is received.
HUD_PPC_EU.book Seite 9 Sonntag, 13. Februar 2005 2:57 14
10
GENERAL PRECAUTIONS
When Installing or Moving
Warning
- This multifunctional digital system requires 220-240 V AC, 8 A 50/60 Hz electric power. For Saudi Arabia
100V version, it requires 100-127 V AC, 12 A 50/60 Hz electric power.
DO NOT use a power supply with a voltage other than that specified.
Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you
are considering increasing the number of outlets, contact an electrician.
- ALWAYS connect this multifunctional digital system to an outlet with a ground connection to avoid the
danger of fire or electric shock in case of short-circuiting. Contact your service representative for the
details. Be sure to use a 3-conductor, grounded wall outlet.
In areas where a 2-pin plug is used, the multifunctional digital systems must be grounded for safety. Never
ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
- Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up and cause a
fire or give you an electric shock.
- DO NOT damage, break or attempt to repair the power cord.
The following things should not be done to the power cord.
- Twisting it - Bending it - Pulling it
- Placing anything on it - Making it hot - Situating it near radiators or other heat sources
This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service
representative.
- When removing the plug from the outlet, DO NOT PULL the power cord. ALWAYS hold the plug when
removing it from the outlet. If the power cord is pulled, the wires may become broken and this could cause
a fire or give you an electric shock.
- Make sure that the ventilation holes are not blocked up.
If the temperature within the multifunctional digital systems becomes too high, a fire could result.
- DO NOT move the multifunctional digital systems to another building, up and down the stairs or for any
great distance.
This could cause an injury or give you and electric shock. When lifting or moving the multifunctional digital
systems, contact your service representative.
- DO NOT move the multifunctional digital systems with optional equipment, such as the finisher, attached.
This could cause a fire or give you an electric shock. When lifting or moving the multifunctional digital
systems, contact your service representative.
- When moving the multifunctional digital systems, be sure to shut down the power prior to pulling out the
plug from the outlet. If the power cord is damaged, this could cause a fire or give you an electric shock.
- The socket outlet should be near the equipment and be easily accessible.
- Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust
and dirt could cause a fire due to the heat released by electric leakage.
HUD_PPC_EU.book Seite 10 Sonntag, 13. Februar 2005 2:57 14
11
Caution
- DO NOT tilt the multifunctional digital systems more than 10 degrees when moving it. If it falls, this could
result in personal injury.
- Avoid placing the multifunctional digital systems in a place unsuitable for its weight and also make sure
the surface is level.
Remember that if the multifunctional digital systems falls over, serious injuries could result.
Weight of the multifunctional digital systems: approx. 83 kg
- There are 4 adjusters (stoppers) on both sides (2 adjusters each) and 2 safety stoppers in front at the
bottom of the paper feed pedestal and the large capacity feeder. After moving and installing the
equipment, be sure to turn the adjusters clockwise to fix them firmly on the floor as shown in the
illustration. Then fix the safety stoppers in the same way.
If they are not adjusted correctly and the equipment falls, this could result in personal injury
To move the equipment, turn the safety stoppers and the adjusters anticlockwise.
- When connecting the optional equipment and interface cable to the multifunctional digital systems, be
sure to turn the power OFF. If the power is not turned off, you could get an electric shock.
To turn the power OFF, see "Turning off the Power (Shutting down)" Page 30.
HUD_PPC_EU.book Seite 11 Sonntag, 13. Februar 2005 2:57 14
12
GENERAL PRECAUTIONS (Cont.)
Other Points
- Make sure that there is enough space around the system to facilitate changing of parts and maintenance.
If there is insufficient space, some operations, such as bypass feeding, will become difficult and the
multifunctional digital systems could even break down.
To insure optimal operation, allow clearances of at least 80 cm on the right, and 10 cm on the left and
behind (refer to the illustration below).
- Adverse environmental conditions may affect the safe operation and performance of the multifunctional
digital systems, and the multifunctional digital systems could break down.
- Avoid locations near windows or with exposure to direct sunlight.
- Avoid locations with drastic temperature fluctuations.
- Avoid too much dust.
- Avoid location that suffer from vibration.
- Allow the air to flow freely and make sure there is a ventilator.
With inadequate ventilation, the unpleasant odor released by ozone will begin to dominate the
atmosphere.
10cm
80cm
10cm
HUD_PPC_EU.book Seite 12 Sonntag, 13. Februar 2005 2:57 14
13
When Using the Multifunctional Digital Systems
Warning
- DO NOT place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the
multifunctional digital systems. And keep paper clips and staples away from the air vent. This could cause
a fire or give you an electric shock.
- If the multifunctional digital systems becomes excessively hot, smoke comes out of it or there is an odd
smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representative.
- If the multifunctional digital systems will not be used for more than one month, remove the plug from the
outlet for safety purposes during that time.
This could cause a fire or give you an electric shock if an insulation failure occurs.
Caution
- DO NOT place heavy objects (4 kg or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
- DO NOT place heavy objects (4 kg or more) on the multifunctional digital systems. If the objects fall off,
this could cause injury.
- DO NOT remove or connect the plug with wet hands, as this could give you an electric shock.
- DO NOT touch the fuser unit and the metal area around it. Since they are very hot, you could be burned
or the shock could cause you to get your hand injured in the machine.
- When changing the angle of the control panel, be careful not to let your hands be caught in the gap
between the equipment and the control panel. This could cause personal injury.
- DO NOT place 3 kg or more of objects on an optional work table. Breaking the work table could cause
personal injury.
1: Warning for high temperature areas (Ventilation holes)
2: Warning for high temperature areas (Fuser unit) - The labels are attached on 3 places.
3: Warning for handling Drum
1
2
3
HUD_PPC_EU.book Seite 13 Sonntag, 13. Februar 2005 2:57 14
14
GENERAL PRECAUTIONS (Cont.)
- DO NOT touch the metal portion of the guide board in the automatic duplexer as it could burn you.
Other Points
- Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause
malfunctions.
- DO NOT turn the power OFF with jammed paper left inside the multifunctional digital systems.
This could cause malfunctions when the main switch is turned ON next time.
To turn the power OFF, see "Turning off the Power (Shutting down)" Page 30.
- Be sure to turn the power OFF when leaving the office or if there is a power outage. However, DO NOT
turn the power OFF if the weekly timer is in use.
To turn the power OFF, see "Turning off the Power (Shutting down)" Page 30.
HUD_PPC_EU.book Seite 14 Sonntag, 13. Februar 2005 2:57 14
15
During Maintenance or Inspection
Warning
- NEVER attempt to repair, disassemble or modify the multifunctional digital systems by yourself. You could
cause a fire or get an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal parts of the
multifunctional digital systems.
- ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could cause
a fire and give you an electric shock due to the heat released by electric leakage.
- DO NOT let liquids such as water and oil get into the system when cleaning the floor. This could cause a
fire and give you an electric shock.
Caution
- DO NOT touch the stapling area. The actual needle point could cause you personal injury. "Saddle-stitch
Finisher (MJ-1024)" Page 281
Other Points
- DO NOT use such solvents as thinner or alcohol when cleaning the surface of the multifunctional digital
systems.
- This could warp the shape of the surface or leave it discoloured.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
HUD_PPC_EU.book Seite 15 Sonntag, 13. Februar 2005 2:57 14
16
GENERAL PRECAUTIONS (Cont.)
When Handling Supplies
Caution
- NEVER attempt to incinerate toner cartridges. This could cause an explosion. DO NOT dispose of used
toner cartridges. Your service technician will collect them. "3.REPLACE TONER CARTRIDGE SYMBOL"
Page 254
HUD_PPC_EU.book Seite 16 Sonntag, 13. Februar 2005 2:57 14
17
DISCLAIMER NOTICE
The following notice sets out the exclusions and limitations of liability of TOSHIBA TEC CORPORATION
(including its employees, agents and sub-contractors) to any purchaser or user (‘User’) of the e-
STUDIO350/450, including its accessories, options and bundled software (‘Product’).
1 The exclusion and limitations of liability referred to in this notice shall be effective to the fullest extent
permissible at law. For the avoidance of doubt, nothing in this notice shall be taken to exclude or limit
TOSHIBA TEC CORPORATION’s liability for death or personal injury caused by TOSHIBA TEC
CORPORATION’s negligence or TOSHIBA TEC CORPORATION‘s fraudulent misrepresentation.
2 All warranties, conditions and other terms implied by law are, to the fullest extent permitted by law,
excluded and no such implied warranties are given or apply in relation to the Products.
3 TOSHIBA TEC CORPORATION shall not be liable for any loss, cost, expense, claim or damage
whatsoever caused by any of the following:
(a) use or handling of the Product otherwise than in accordance with the manuals, including but not
limited to Operator’s Manual, User‘s Guide, and/or incorrect or careless handling or use of the Product;
(b) any cause which prevents the Product from operating or functioning correctly which arises from or
is attributable to either acts, omissions, events or accidents beyond the reasonable control of TOSHIBA
TEC CORPORATION including without limitation acts of God, war, riot, civil commotion, malicious or
deliberate damage, fire, flood, or storm, natural calamity, earthquakes, abnormal voltage or other
disasters;
(c) additions, modifications, disassembly, transportation, or repairs by any person other than service
technicians authorized by TOSHIBA TEC CORPORATION; or
(d) use of paper, supplies or parts other than those recommended by TOSHIBA TEC CORPORATION.
4 Subject to paragraph 1, TOSHIBA TEC CORPORATION shall not be liable to Customer for:
(a) loss of profits; loss of sales or turnover; loss of or damage to reputation; loss of production; loss of
anticipated savings; loss of goodwill or business opportunities; loss of customers; loss of, or loss of use
of, any software or data; loss under or in relation to any contract; or
(b) any special, incidental, consequential or indirect loss or damage, costs, expenses, financial loss or
claims for consequential compensation;
whatsoever and howsoever caused which arise out of or in connection with the Product or the use or
handling of the Product even if TOSHIBA TEC CORPORATION is advised of the possibility of such
damages.
TOSHIBA TEC CORPORATION shall not be liable for any loss, cost, expense, claim or damage caused
by any inability to use (including, but not limited to failure, malfunction, hang-up, virus infection or other
problems) which arises from use of the Product with hardware, goods or software which TOSHIBA TEC
CORPORATION has not directly or indirectly supplied
HUD_PPC_EU.book Seite 17 Sonntag, 13. Februar 2005 2:57 14
18
DISCLAIMER NOTICE (Cont.)
HUD_PPC_EU.book Seite 18 Sonntag, 13. Februar 2005 2:57 14
19
1
1. BEFORE USING
EQUIPMENT
1. DESCRIPTION OF EACH COMPONENT ...........................................................................20
Main Components................................................................................................................20
Optional Equipment .............................................................................................................21
Control Panel .......................................................................................................................23
Adjustment of the Angle of the Control Panel......................................................................25
Touch Panel .........................................................................................................................27
2. TURNING ON THE POWER SWITCH ................................................................................30
Turning on/off the Power......................................................................................................30
Controlling the Use of the Copier with Department Codes ..................................................32
3. SWITCHING TO THE ENERGY-SAVING MODE................................................................33
4. DATA OVERWRITE KIT (OPTIONAL) .................................................................................34
HUD_PPC_EU.book Seite 19 Sonntag, 13. Februar 2005 2:57 14
20 1.BEFORE USING EQUIPMENT
1
1. DESCRIPTION OF EACH COMPONENT
Main Components
1: Front cover 8: Inner tray
2: Drawers 9: Control panel
3: Operator’s manual pocket (back side) 10: Touch panel
4: Power switch 11: Touch panel contrast adjustment volume
5: Automatic duplexer 12: Toner
6: Bypass tray 13: Used toner bag
7: Original scale *1, *2: Optional
1
4
2
3
8
7
13
12
9
5
6
*1
*2
(10)
(11)
HUD_PPC_EU.book Seite 20 Sonntag, 13. Februar 2005 2:57 14
21
1
Optional Equipment
1: Original cover (KA-3511)
Holds an original.
2: Reversing automatic document feeder (MR-3015)
Automatically feeds a placed stack of originals one by one to have them copied.
3: Offset tray (MJ-5005)
Enables copied and printed sets to be collated or stacked in groups with each set being offset.
4: Job separator (MJ-5004)
Enables Faxes, copies and prints to be output onto separate paper trays.
5: Large capacity feeder (KD-1012)
Feeds up to 2,500 sheets of LT paper (20 lb. Bond) (recommended by Toshiba) continuously.
6: Paper feed pedestal (KD-1011)
Adds one drawer to the equipment.
7: Additional drawer module (MY-1021)
Enables one drawer to be added to the paper feed pedestal.
11
5 6 7
1 2
43
10
9
8
HUD_PPC_EU.book Seite 21 Sonntag, 13. Februar 2005 2:57 14
22 1.BEFORE USING EQUIPMENT
1.DESCRIPTION OF EACH COMPONENT (Cont.)
18: Saddle-stitch finisher (MJ-1024)
Enables the saddle stitching in addition to the sort/group mode and stapling. (Hole punch unit can be
installed.) Requires the Bridge unit (KN-3520 sold separately) for the installation.
9: Multi-staple finisher (MJ-1023)
Enables the sort/group mode and stapling. (Hole punch unit can be installed.) Requires the Bridge unit
(KN-3520 sold separately) for the installation.
10: Single-staple finisher (MJ-1022) (for e-STUDIO350 only)
Enables the sort/group mode and stapling. Requires the Bridge unit (KN-3520 sold separately) for the
installation.
11: Hole punch unit (MJ-6004)
Makes punching holes on output pages.
We have other options: Work tray (KK-3511), Fax board (GD-1150), Printer kit (GM-1010), Printer/Scanner
kit (GM-2010), Scanner upgrade kit (GM-3010), Fax board 2nd line (GD-1160), Wireless LAN adapter (GN-
1010), Scrambler board (GP-1030), Data overwrite kit (GP-1050).
Contact your service technician or representative for the details.
HUD_PPC_EU.book Seite 22 Sonntag, 13. Februar 2005 2:57 14
23
1
Control Panel
When operating the equipment and specifying the various settings through the equipment itself, use the
buttons on the control panel.
1: [HELP] button
When pressing this button, appropriate operation procedures are displayed.
2: [USER FUNCTIONS] button
Press this button to set the paper size of the drawer, the drawer for special use, or to set/register the
settings including such as the change of the default setting of the copy, scan and Fax functions.
See the [User Functions Guide].
3: [TEMPLATE] button
Use this button to store and recall the various settings that are frequently used for copy, scan and Fax
functions.
4[EXTENSION] button
This is the button to extend functions in the future. It is invalid at present.
5: [e-FILING] button
Use this button to access the saved image data.
6: [SCAN] button
Press this button to use the scanning function. (Optional printer/scanner kit or both printer kit and scanner
upgrade kit is required.)
7: [COPY] button
Press this button to use the copy function.
8: [FAX] button
Press this button to use the Fax/Internet Fax function. (Optional FAX board, printer/scanner kit, or both
printer kit and scanner upgrade kit is required.)
17
12 3 4 6 7 8 9 10 11 12 13
14
15
16
19 182021
5
HUD_PPC_EU.book Seite 23 Sonntag, 13. Februar 2005 2:57 14
24 1.BEFORE USING EQUIPMENT
1.DESCRIPTION OF EACH COMPONENT (Cont.)
19: PRINT DATA/MEMORY RX/FAX communication
If these lamps light, they show the status of receiving data, receiving original(s) standing by to be printed
and currently used telephone line (1 or 2).
10: [INTERRUPT] button
Use this button to interrupt the copying job in process and to perform another copying job.
You can resume the interrupted copying job by pressing this button again.
11: [JOB STATUS] button
Use this button to confirm each status of print or scan or Fax, and journal for TX or RX of Fax.
"1.JOB STATUS" Page 182
12: [ACCESS] button
Use this button when the department codes have been set.
If this button is pressed after copying, the next user cannot use the copy function without keying in the
registered department code. (See the [User Functions Guide].)
13: [ENERGY SAVER] button
If you are not going to use the equipment for a while, press this button. The equipment enters the energy
saving mode and all the display lamps are turned off.
14: [FUNCTION CLEAR] button
When this button is pressed, all selected functions are cleared and returned to the default settings.
"3.GENERAL COPYING PROCEDURES" Page 51
*Automatic Function Clear
Even if you do not press the [FUNCTION CLEAR] button, within the specified period of time after copying
is finished or after the last button is pressed in a copy procedure, the automatic function clear mode will
clear all settings to defaults, and the basic screen will be displayed. While the department management
function is being operated, the display returns to the access code input screen.
15: [STOP] button
Use this button to stop an ongoing scan and copy operation.
16: [START] button
Press this button to start copying, scanning and Fax operation.
17: Digital keys
Use these keys to enter the number of copies you want to make and so on.
18: [CLEAR] button
Use this button to correct numbers entered with the digital keys such as an incorrect copy quantity.
19: ERROR lamp
ERROR lamp lights in red when an error occurs and the equipment needs some actions.
20: [MONITOR/PAUSE] button
This button is used when the copier is used as a Fax (optional). (See the [Operator’s Manual for Facsimile
Function] for detail.)
21: Touch Panel
The state of a copier and directions for its operation are expressed as characters and illustrations.
HUD_PPC_EU.book Seite 24 Sonntag, 13. Februar 2005 2:57 14
25
1
Adjustment of the Angle of the Control Panel
When Adjusting the Angle of the Control Panel
The angle of the control panel is adjustable at any angle from 5 to 45 degrees from the horizontal position
(at the time of installation).
* When changing the angle of the control panel, be careful not to let your hands be caught in the gap
between the equipment and the control panel. This could injure you.
When Fixing the Angle of the Control Panel
When you want to fix the angle of the control panel (at 7 degrees from the horizontal position), move the
stopper attached on the backside of the control panel from the position (1) to (2).
Perform the following procedure to move the stopper.
1: The position where the angle is adjustable.
2: The position where the angle is fixed.
(2)
(1)
HUD_PPC_EU.book Seite 25 Sonntag, 13. Februar 2005 2:57 14
26 1.BEFORE USING EQUIPMENT
1.DESCRIPTION OF EACH COMPONENT (Cont.)
1
1
Slightly shift the stopper to the right, and
then pull it out.
2
Fit the latches of the stopper in the hole of
the position (2) and insert them turning
the stopper itself.
3
Shift the stopper to the left until it clicks.
- The angle of the control panel is fixed at 7 degrees.
HUD_PPC_EU.book Seite 26 Sonntag, 13. Februar 2005 2:57 14
27
1
Touch Panel
When the power is turned on, and ‘READY’ is displayed, the basic screen of the copy function is shown on
the touch panel.
On the screen, currently set functions, selected functions and the copier status are shown via messages
and illustrations.
* The contents of the touch panel screens in this manual show the equipment with all options.
1: Message 6: Date and time
2: Reproduction ratio 7: Set functions confirmation button
3: Total copy quantity 8: Function setting area
4: Currently selected drawer size 9: Index buttons
5: Remaining paper level
Message Display
The following information is shown on the touch panel:
Equipment status, operational instructions, cautionary messages, reproduction ratios, total copy quality,
paper size of a selected drawer, amount of paper in a selected drawer and the date and time.
Touch-buttons
The various function items are touch-button selectable. Press any buttons lightly with your finger.
-Index buttons
This button is used for switching the menu. The type and the number of the index buttons varies
depending on each function of Copy, Scan and Fax.
-Function setting area
This is an area for selecting and setting each function.
1
9
8
2 3 6
7
54
HUD_PPC_EU.book Seite 27 Sonntag, 13. Februar 2005 2:57 14
28 1.BEFORE USING EQUIPMENT
1.DESCRIPTION OF EACH COMPONENT (Cont.)
1-[SETTINGS] (set functions confirmation) button
This button allows you to confirm the functions that have been set.
(An example is shown below.)
-The icons displayed on the screen are as follows (some icons may not appear on the screen):
HUD_PPC_EU.book Seite 28 Sonntag, 13. Februar 2005 2:57 14
29
1
Clearing the Functions Selected
If you press any button that is half-tone shaded, the function selected is cleared. Also, if the copier is left
inactive for a while, the automatic function clear works and the setting will be cleared.
-Automatic Function Clear
Even if you do not press the [FUNCTION CLEAR] button, within the specified period of time (default
setting: 45 seconds) after outputting is finished or after the last button is pressed in a procedure, the
automatic function clear mode will work to clear all settings, and the basic screen of the copy function will
be displayed. While the department management function is being operated, the display returns to the
department code input screen.
The period for the automatic function clear is selectable. (See the [User Functions Guide].)
HUD_PPC_EU.book Seite 29 Sonntag, 13. Februar 2005 2:57 14
30 1.BEFORE USING EQUIPMENT
1
2. TURNING ON THE POWER SWITCH
Turning on/off the Power
Turning on the Power Switch
1
Open the switch cover, and then turn ON
the power switch.
- “Wait Warming Up” appears on the Basic screen on the touch
panel.
2
About 20 seconds later, the equipment
will be ready.
- “READY” appears on the Basic screen.
- While the copier is warming up, you can use the Auto Job Start
function. "4.AUTO JOB START (JOB PRESET)" Page 54
- “POWER FAILURE” message:
When restarting the equipment due to the power failure, etc.,
“POWER FAILURE” appears at the upper right of the screen. To
clear it, press the [FUNCTION CLEAR] button twice.
The job in progress at the time of the power failure is deleted.
Turning off the Power (Shutting down)
When turning off the power of the equipment, perform the following shutdown procedure.
DO NOT turn off the power by switching off the power switch of the equipment as it can cause the failure of
the hard disc.
Before turning off the power, be sure that the following 3 conditions are satisfied.
- No jobs are left in the printing job list. See "1.JOB STATUS" Page 182.
- Make sure that none of PRINT DATA, MEMORY RX and Fax communication lamps is blinking.
- No PCs access the equipment via network.
1
Press the [USER FUNCTIONS] button on
the control panel.
HUD_PPC_EU.book Seite 30 Sonntag, 13. Februar 2005 2:57 14
31
1
2
Press the [USER] button to enter the user
setting menu, and then press the
[SHUTDOWN] button.
3
“Processing job will be deleted. Are you
sure you want to shutdown?” appears on
the screen. Press the [YES] button.
- To cancel the shutdown operation, press the [NO] button.
4
“Shutdown in progress” appears on the
screen, and then the equipment is shut
down.
- The power switch automatically returns to the OFF position.
HUD_PPC_EU.book Seite 31 Sonntag, 13. Februar 2005 2:57 14
32 1.BEFORE USING EQUIPMENT
2.TURNING ON THE POWER SWITCH (Cont.)
1
Controlling the Use of the Copier with Department Codes
With the use of the department codes, you can restrict users as well as manage copy volumes made by
individual groups or departments of your company. See the [User Functions Guide].
1
When the department management
function is in use, the screen shown on
the right appears immediately after the
power switch is turned on.
- The same screen is displayed when the [ACCESS] button is
pressed or the automatic function clear mode is activated.
2
Key in a registered department code (5-
digit).
- The copier will be ready for copying.
If “Enter Department Code” remains, the department code you have
entered may be incorrect. Press the [RESET] button, and then key
in the correct code.
-After Copying is finished.
If the department control function is in use, be sure to press the
[ACCESS] button on the control panel after finishing the use of
the equipment. The display returns to the department code input
screen and the department management function will remain
active.
HUD_PPC_EU.book Seite 32 Sonntag, 13. Februar 2005 2:57 14
33
1
3. SWITCHING TO THE ENERGY-SAVING MODE
Switching to the energy-saving mode is available only when one the following options is installed.
- Fax board
-Printer kit
- Printer kit and scanner upgrade kit
- Printer/scanner kit
If you are not going to use the equipment for a while, press the [ENERGY SAVER] button on the control
panel for a few seconds to enter the energy saving mode.
In this mode, the display and lighted button on the control panel are turned off and the [ENERGY SAVER]
button lights in green. To start the equipment again, press the [ENERGY SAVER] button (or [COPY],
[SCAN], [FAX], [e-FILING], [START] button on the control panel). (To enable the [SCAN] button, optional
printer/scanner kit or both printer kit and scanner upgrade kit is required. To enable the [FAX] button,
optional FAX board, printer/scanner kit, or both printer kit and scanner upgrade kit is required.)
* In the energy-saving mode, when a job for printing, Fax, Internet Fax or E-mail is received, the equipment
becomes automatically ready status.
HUD_PPC_EU.book Seite 33 Sonntag, 13. Februar 2005 2:57 14
34 1.BEFORE USING EQUIPMENT
1
4. DATA OVERWRITE KIT (OPTIONAL)
If an optional data overwrite kit is installed, the data temporary stored in the hard disk of this equipment
during copying, printing, scanning, etc. can be automatically erased after the job is completed.
Data to be erased
The temporary stored data during copying, printing, scanning or Fax, Internet Fax or Network Fax
transmission.
Erasing method
After the job is completed, the temporary stored data in the hard disk of this equipment are overwritten with
the data that cannot be extracted to erase the data.
The following screen is displayed during the data erasing.
Precautions
- When the optional printer kit and scanner upgrade kit are installed, it is necessary to change them to the
printer/scanner kit because there is no more free USB port.
- If the data overwrite kit is installed, the processing speed of copying, printing, etc. becomes slow.
- When "ERASING DATA" does not appear in the control panel, the data overwrite kit may not operate
properly. Contact your service technician.
- Data are normally overwritten only once. When you want the data to be overwritten more than once,
contact your service technician.
- When the optional scrambler kit is installed, encrypted data are overwritten to erase the data.
HUD_PPC_EU.book Seite 34 Sonntag, 13. Februar 2005 2:57 14
35
2
2. HOW TO MAKE COPIES
1. SETTING COPY PAPER .....................................................................................................36
Acceptable Copy Paper Types and Sizes............................................................................36
Toshiba-Recommended Paper/Handling and Storing Paper ...............................................37
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses.....................38
2. SETTING ORIGINALS.........................................................................................................45
Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored......45
When Placing an Original on the Glass ...............................................................................46
When Using the Reversing Automatic Document Feeder (optional)....................................48
3. GENERAL COPYING PROCEDURES................................................................................51
4. AUTO JOB START (JOB PRESET).....................................................................................54
5. INTERRUPT COPYING.......................................................................................................56
6. STOPPING THE COPY OPERATION .................................................................................57
7. BYPASS COPYING .............................................................................................................58
HUD_PPC_EU.book Seite 35 Sonntag, 13. Februar 2005 2:57 14
36 2.HOW TO MAKE COPIES
2
1. SETTING COPY PAPER
Acceptable Copy Paper Types and Sizes
* “Maximum capacity” refers to the number of sheets when the paper recommended by Toshiba is set.
* LT format is the standard size for only use in North America.
* The values shown in the parenthesis are rounded off below a decimal point.
Abbreviations for paper sizes:
LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer, SQ: Square
Feeder Paper Type Paper Size Maximum sheet capacity
Drawers
(The optional
drawers included)
Plain Paper
(64-80 g/m2)
(Standard Size)
A/B format: A3, A4, A4-R, A5-R, B4,
B5, B5-R, FOLIO (210 x 330 mm)
LT format:
LD (11” x 17”), LG (8 1/2” x 14”),
LT (11 x 8 1/2”), LT-R (8 1/2” x 11”),
ST-R (5 1/2” x 8 1/2”),
COMP (10 1/8” x 14”),
13” LG (8 1/2” x 13”),
8.5” SQ (8 1/2” x 8 1/2”),
8K, 16K, 16K-R
600 sheets (64 g/m2)
550 sheets (80 g/m2)
Thick 1
(81-105 g/m2)
450 sheets (81-105 g/m2)
* Height: approx. 60.5 mm
Large capacity
feeder (Option)
Plain Paper
(64-80 g/m2)
(Standard Size)
A4 only 3,000 sheets (64 g/m2)
2,500 sheets (80 g/m2)
Thick 1
(81-105 g/m2)
2,000 sheets (81-105 g/m2)
* Height: approx. 137.5 mm
Bypass Tray Plain paper
(64-80 g/m2)
(Standard Size)
A/B format: A3, A4, A4-R,
A5-R, A6-R, B4, B5, B5-R,
FOLIO (210 x 330 mm)
LT format:
LD, LG, LT, LT-R,
ST-R, COMP, 13” LG, 8.5” SQ,
8K, 16K, 16K-R
(Non-Standard size)
Length: 100-297 mm
Width: 148-432 mm
100 sheets (64-80 g/m2)
* Height: approx. 11 mm
Thick 1
(81-105 g/m2)
80 sheets (81-105 g/m2)
* Height: approx. 11 mm
Thick 2
(106-163 g/m2)
40 sheets (106-163 g/m2)
* Height: approx. 11 mm *1
*1. Automatic duplex copying is not available.
Thick 3
(164-209 g/m2)
30 sheets (164-209 g/m2)
* Height: approx. 11 mm *1
Tracing paper
(75 g/m2 only)
* Height: approx. 11 mm *1
Sticker labels * Height: approx. 11 mm *2
*2. Use Thick 2 mode for Sticker Labels.
OHP *1 (Standard Size) A4 only 30 sheets
* Height: approx. 11 mm
HUD_PPC_EU.book Seite 36 Sonntag, 13. Februar 2005 2:57 14
37
2
Toshiba-Recommended Paper/Handling and Storing Paper
The recommended paper
To make copies with a fine image, the following sheets are recommended.
If you use copy paper other than the recommended types, ask your service technician.
* An OHP film should surely be used in the Toshiba-recommended film. Using other film may cause a
malfunction.
Handling and Storing Paper
Pay attention to the following points:
- Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of paper; this may cause a malfunction
- Do not use paper with creases, wrinkles, curled paper, paper prone to curling, smooth paper, or tough
paper; this may cause paper misfeeds.
- Paper should be wrapped in its wrapping paper and stored in a damp-free place.
- To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper Type Toshiba Recommendation Paper Weight
Plain Paper TGIS Paper/Neusiedler 80 g/m2
Thick 1 Colour Copy/Neusiedler 90 g/m2
Colour Copy/Neusiedler 100 g/m2
Thick 2 Colour Copy/Neusiedler 120 g/m2
Colour Copy/Neusiedler 160 g/m2
Thick 3 Colour Copy/Neusiedler 200 g/m2
Tracing Paper Tracing paper/Ostrich International 75 g/m2 only
Sticker Labels 3478/ZWECK-AVERY -
OHP Film PP2500/3M -
HUD_PPC_EU.book Seite 37 Sonntag, 13. Februar 2005 2:57 14
38 2.HOW TO MAKE COPIES
1.SETTING COPY PAPER (Cont.)
2
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses
The paper size of the drawer can be changed. The drawers can also be set for cover sheet, insertion, thick
paper 1, Fax and special sheets.
Changing the Paper Size of the Drawer
1
Pull out the drawer carefully until it comes
to a stop.
2
Push the lower part of the width guide in
the direction of the arrow to remove it;
then reinstall the width guide at the
desired paper size (indicated on the
bottom inner surface of the drawer).
3
Push the arrow part (right side) of the size
selection lever to unlock it.
HUD_PPC_EU.book Seite 38 Sonntag, 13. Februar 2005 2:57 14
39
2
4
While pushing the size selection lever in
the direction of the arrow, set the side
guide to the desired paper size (indicated
on the bottom inner surface of the
drawer).
- Adjust the side guides with both hands.
If the side guide’s shape on the front side of the drawer and its
operation differ from those in this Operator’s Manual depending on
the production timing, perform the following in reference to the
illustration on the right.
- While pushing the size selection lever to the right, set the side
guide to the desired paper size.
5
Push the arrow part (left side) to lock the
size selection lever.
6
Place paper in the drawer(s).
- Place paper face up.
- Maximum number of sheets that can be set. "Acceptable Copy
Paper Types and Sizes" Page 36
- Fan the paper well before placing it in the drawer.
- Do not add paper above the line indicated on the guide.
- Do not use creased, folded, wrinkled or damp sheets of paper.
HUD_PPC_EU.book Seite 39 Sonntag, 13. Februar 2005 2:57 14
40 2.HOW TO MAKE COPIES
1.SETTING COPY PAPER (Cont.)
2
Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is
left between the paper and the side guide. If there is no gap, this
could cause paper misfeeding.
7
Push the drawer straight into the copier
until it comes to a stop.
- Be sure to push the drawer fully in.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
8
Change the size mark plate to match with
the size of paper that has been set.
9
Press the [USER FUNCTIONS] button on
the control panel.
10
Press the [USER] button, then press the
[GENERAL] button on the touch panel.
0.5mm
(0.02'')
HUD_PPC_EU.book Seite 40 Sonntag, 13. Februar 2005 2:57 14
41
2
11
Press the [DRAWER] button.
12
Press the drawer button corresponding
to the one which the paper size has been
changed, and then press the button
indicating the new paper size.
HUD_PPC_EU.book Seite 41 Sonntag, 13. Februar 2005 2:57 14
42 2.HOW TO MAKE COPIES
1.SETTING COPY PAPER (Cont.)
2
Setting the Drawer for Special Uses
You can set the drawer for various uses (cover sheet, sheet insertion, thick paper, Fax paper, special
sheets).
- Acceptable copy paper "1.SETTING COPY PAPER" Page 36
- Drawer for cover sheet "9.COVER COPYING" Page 118
- Drawer for sheet insertion "10.SHEET INSERTION MODE" Page 121
- Drawer for special sheets. Coloured paper, paper with a watermark, etc.
1
Place paper face up in the drawer(s).
2
Press the [USER FUNCTIONS] button on
the control panel.
3
Press the [USER] button to enter the user
menu and then press the [GENERAL]
button.
4
Press the [DRAWER] button.
HUD_PPC_EU.book Seite 42 Sonntag, 13. Februar 2005 2:57 14
43
2
5
Press the drawer button corresponding to
the one in which the paper size has been
changed, and then press the button
indicating the new paper type.
- If you want to select the [COVER] or [INSERT] button, make sure
that paper with the same size as that for the COVER or INSERT
is set in the other drawer including the optional large capacity
feeder.
- Press [THICK 1] depending on the paper weight of the cover
sheet, sheet insertion, and special sheet.
In the case of cover sheet or sheet insertion, is displayed in
the drawer button corresponding to the one in which the paper
has been set.
* For example, when inserting 90 g/m2 paper, press the
[INSERT] button, and press the [THICK 1] button.
- The setting is completed as shown on the right.
HUD_PPC_EU.book Seite 43 Sonntag, 13. Februar 2005 2:57 14
44 2.HOW TO MAKE COPIES
1.SETTING COPY PAPER (Cont.)
2
- 2 drawers can be set for the sheet insertion.
- After having set INSERT 1, press the drawer button
corresponding to the one in which the paper for INSERT 2 has
been set, and press the [INSERT] button.
Clearing the Drawer for Special Uses
1
Press the drawer button corresponding to
the one which is set for the special use,
then press the corresponding button
(thick, insert, cover, etc.) on the bottom
line of the display.
- If you clear INSERT 1 when both INSERT 1 and INSERT 2 are
set, the drawer for INSERT 2 changes to INSERT 1.
- Each of the buttons toggles the associated drawer on/off.
- Replace the paper set in the drawer as required.
HUD_PPC_EU.book Seite 44 Sonntag, 13. Februar 2005 2:57 14
45
2
2. SETTING ORIGINALS
Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored
Acceptable Original Types and Sizes
* LT format is the standard size used in the North America.
* When the original of LT format is placed on the glass, the automatic detection may not work correctly.
Maximum number of sheets (all sizes) that can be set in the reversing automatic document feeder
(optional): 100 sheets (50-80 g/m2) or less than 16 mm in height.
Maximum Number of Sheets that can be Stored
Up to 1,000 sheets of A4 size can be stored per 1 job during copy, or until the memory becomes full.
When exceeding the above limit during the scanning, the following screen is displayed. The scanned data
is printed by pressing the [YES] button and it is deleted by pressing the [NO] button.
Setting place Types of originals Maximum size Sizes capable of automatic detection
Glass
*1
*1.Do not place any heavy object (4 kg or over) on the glass.
Sheets
3-dimensional
objects
Books
Width: 297 mm
Length: 432 mm
(Standard size)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R
LT format:
LD (11” x 17”), LG (8 1/2” x 14”)
LT (11” x 8 1/2”), LT-R (8 1/2” x 11”)
ST-R (5 1/2 x 8 1/2”)
Reversing
automatic
document
feeder
(optional)
*2
*2.Even if listed under “Types of originals”, some of the originals may not be used depending on paper quality.
Plain paper
Recycled paper:
1-sided Original:
50-127 g/m2
2-sided Original:
50-105 g/m2
Width: 297 mm
Length: 432 mm
(Standard size)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R,
FOLIO (210 x 330 mm)
LT format:
LD, LG, LT, LT-R, ST-R, COMP (10 1/8” x 14”) *3
*3.Automatic detection cannot be worked when the different paper formats are mixed.
HUD_PPC_EU.book Seite 45 Sonntag, 13. Februar 2005 2:57 14
46 2.HOW TO MAKE COPIES
2.SETTING ORIGINALS (Cont.)
2
When Placing an Original on the Glass
Sheet Originals
1
Raise the original cover or the reversing
automatic document feeder (optional),
and place the original face down on the
glass.
- Raise it 60 degrees or more for detecting the original.
- A: Original
2
Align the original against the left rear
corner of the glass.
3
Lower the original cover or the reversing
automatic document feeder (optional)
slowly.
- When copying originals with high transparency, such as OHP
films and tracing paper, place a blank sheet of paper, the size of
the original or larger, over the original.
- A: Original
- B: Blank sheet
(A)
(B)
(A)
HUD_PPC_EU.book Seite 46 Sonntag, 13. Februar 2005 2:57 14
47
2
Book-type Originals
1
Raise the original cover or the reversing
automatic document feeder (optional),
and place the original in the direction
shown in the illustration.
- When using the Book-type Originals to 2-sided Copies ("5. Book-
type Originals to 2-Sided Copies" Page 92) or the Dual-Page
("4.DUAL-PAGE" Page 107) function, centre the book original
on the yellow indicator line.
2
Lower the original cover or the reversing
automatic document feeder (optional)
slowly.
- Do not try to force the original cover or the reversing automatic
document feeder to fully close over a very thick original, such as
a big book. Copies can be made even if the cover or feeder does
not close fully.
- During copying, an intense light may leak out. Do not look at the
original glass surface.
HUD_PPC_EU.book Seite 47 Sonntag, 13. Februar 2005 2:57 14
48 2.HOW TO MAKE COPIES
2.SETTING ORIGINALS (Cont.)
2
When Using the Reversing Automatic Document Feeder (optional)
Precautions for Using the Reversing Automatic Document Feeder
Do not use the following type 1 to 7 of originals as they may misfeed or become damaged:
1 : Badly wrinkled or folded originals; in particular, originals whose leading edge is curled may fail to be
correctly fed.
2 : Originals with carbon paper
3 : Taped, pasted or clipped (cut out) originals
4 : Clipped or stapled originals
5 : Originals with holes or tears ones
6 : Damp originals
7 : OHP film originals
* Do not use tracing paper, permeable paper and coating paper (coating with wax, etc.).
Also, the following type 8 and 9 of originals should be handled carefully:
8 : Originals, 2 of which, when pinched between 2 fingers, cannot be moved, or originals that are surface-
treated may fail to separate properly.
9 : Folded or curled originals should be smoothed before being used.
* The different sized originals are limited for setting. "Setting the [MIXED ORIGINAL SIZE]" Page 70
If the scanning area and guide area are dirty, it may cause black streaks, etc. on the printed paper. Cleaning
them preferably once a week is recommended. See "Weekly Maintenance" Page 290
1
5 6
7
3
4
89
2
HUD_PPC_EU.book Seite 48 Sonntag, 13. Februar 2005 2:57 14
49
2
In the Continuous Feed Mode
* See "Continuous Feed Mode" Page 132
* To set originals with the different size, see "Setting the [MIXED ORIGINAL SIZE]" Page 70
1
After aligning the edges of originals, place
the originals face up and align the slides
to their width.
- Align the originals in order from the top because they will be fed
from the top.
- One original sheet is also acceptable.
- Maximum number of sheets (all sizes) that can be set in the
reversing automatic document feeder: 100 sheets (50-80 g/m2) or
less than 16 mm in height.
- To set the mixed-sized originals, see "Setting the [MIXED
ORIGINAL SIZE]" Page 70.
- Use the original stopper as required.
When the number of originals is too large to be set at one time, you
can divide the originals into several sets and set them one after
another. To do so, place the first set of originals first and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals.
HUD_PPC_EU.book Seite 49 Sonntag, 13. Februar 2005 2:57 14
50 2.HOW TO MAKE COPIES
2.SETTING ORIGINALS (Cont.)
2
Inside the Single-feed Mode
See "Single-feed Mode" Page 133
1
Align the slides to the desired original
size.
2
Insert the original with its face up and
straight along the slides, it will be pulled
in automatically.
- When the original starts being pulled in, let go of it.
HUD_PPC_EU.book Seite 50 Sonntag, 13. Februar 2005 2:57 14
51
2
3. GENERAL COPYING PROCEDURES
After placing or confirming paper in the drawers, place the originals. When the [START] button is pressed
with any settings unchanged, copies are made in the initial (default) settings. You can make copies as
desired by setting different copy modes.
Initial (default) Settings
The copy modes that are automatically set when the power is turned on, when the energy-saving mode is
cleared or when the [FUNCTION CLEAR] button is pressed on the control panel are called the initial
(default) settings. The initial setting when installing the equipment is as follows:
* The initial setting can be changed. See the [User Functions Guide] for details.
Copying Procedure
1
Place paper in the drawer(s).
- "Changing the Paper Size of the Drawer" Page 38
- "Acceptable Copy Paper Types and Sizes" Page 36
When the desired paper is not placed in any of the drawers or the
large capacity feeder:
- Setting the drawer "Changing the Paper Size of the Drawer/
Setting the Drawer for Special Uses" Page 38
- "7.BYPASS COPYING" Page 58
Item Initial (default) setting
Reproduction ratio 100%
Copy quantity 1
Paper selection Automatic paper selection
Original Copy 1-sided 1 sided
Exposure Auto Exposure
Image quality TEXT/PHOTO mode
Finishing mode Placing original on the original glass:
Non-sort/non-staple mode
Placing the reversing automatic document feeder
(optional): Sort mode
Installing the reversing automatic document feeder
(optional):
Continuous original feed mode
HUD_PPC_EU.book Seite 51 Sonntag, 13. Februar 2005 2:57 14
52 2.HOW TO MAKE COPIES
3.GENERAL COPYING PROCEDURES (Cont.)
2
2
Place the original(s).
- "Acceptable Original Types and Sizes/Maximum Number of
Sheets that can be Stored" Page 45
- "When Placing an Original on the Glass" Page 46
- "When Using the Reversing Automatic Document Feeder
(optional)" Page 48
When the reversing automatic document feeder (optional) is
installed and the single feed mode is selected, place the original(s)
after the copy mode is set.
3
Select the copy modes as required.
- Copy modes cannot be changed after the [START] button is
pressed (including the case when originals are divided into
multiple sets when fed).
- Selecting multiple copy modes may be restricted depending on
their combination.
4
Press the [START] button.
- Copying starts.
To copy the original, which is placed on the original glass, after
scanning and storing it in the memory (sort mode, 1-side original to
2-sided copies, etc.), follow step 5 and 6.
HUD_PPC_EU.book Seite 52 Sonntag, 13. Februar 2005 2:57 14
53
2
5
Place the next original, and press the
[START] button.
- Set the first page of your originals first.
- You can also press the [YES] button to perform the same
operation.
- Repeat this step for the subsequent originals.
6
Once the final original has been scanned,
press the [FINISHED] button.
- Copying starts. The paper exits with its copied side down.
When Coming Across the Situations below
To make multiple sets of copies:
- Key in the copy quantity.
- To correct the input copy quantity, press the [CLEAR] button.
- Raise the stopper as required.
If the paper runs out in the middle of copying:
- The [JOB STATUS] button blinks. Press this button to check which drawer is flashing and add paper.
To stop a copy operation:
"6.STOPPING THE COPY OPERATION" Page 57
When “Wait” appears:
The copier may automatically go into the adjustment mode. It will soon start working. Do not turn OFF the
power. Just wait for a while.
HUD_PPC_EU.book Seite 53 Sonntag, 13. Februar 2005 2:57 14
54 2.HOW TO MAKE COPIES
2
4. AUTO JOB START (JOB PRESET)
While warming up or multi-copying, you can reserve the copy.
Setting Auto Job Start
1
Place the original(s).
2
Select the copy mode.
Be sure that the job starts in the previous copy mode if you do not
select the copy mode.
3
Press the [START] button.
- Up to 6 jobs can be stored in the memory. Place the originals of
the 6th job on the original glass or the reversing automatic
document feeder (optional) and press the [START] button. Then
“Auto Start” appears:
- Up to 1,000 sheets of A4 size can be stored per 1 job, or until the
memory becomes full. (For the screen when the maximum
number of sheets exceeded, see "Maximum Number of Sheets
that can be Stored" Page 45.)
HUD_PPC_EU.book Seite 54 Sonntag, 13. Februar 2005 2:57 14
55
2
Confirming and Canceling Auto Job Start
-Confirming auto job start and canceling the job waiting to be copied.
Press the [JOB STATUS] button on the control panel to display the job list for confirming and canceling
the data.
See "1.JOB STATUS" Page 182 for canceling the job.
-Canceling auto job start.
Press the [STOP] button on the control panel to cancel the job during the scanning or in the status that
the 6th job is being received to be stored.
HUD_PPC_EU.book Seite 55 Sonntag, 13. Februar 2005 2:57 14
56 2.HOW TO MAKE COPIES
2
5. INTERRUPT COPYING
While multi-copying is in progress, you can interrupt and make copies from different originals.
* The following modes cannot be used with interrupt copying:
- Cover sheet copying
- Sheet insertion copying
- Scan to e-filing/Save as file
1
Press the [INTERRUPT] button.
- “Job interrupted job 1 saved” appears.
- Interrupt copying is available while copying is in progress.
When “Auto Start” is displayed, you cannot make interrupt copying.
2
Replace the original with a new one.
- "2.SETTING ORIGINALS" Page 45
zSelect other copy modes as required.
3
Press the [START] button.
4
After you have finished interrupt copying,
press the [INTERRUPT] button again.
- “READY to resume job 1” appears.
Without performing step 4, the interrupt copying mode will
automatically be cancelled by the automatic function clear and the
previously interrupted copy job will resume in a certain period of time
after the interrupt copying has finished.
HUD_PPC_EU.book Seite 56 Sonntag, 13. Februar 2005 2:57 14
57
2
6. STOPPING THE COPY OPERATION
If you want to stop the operation during scanning or multi-copying, the [STOP] button is used.
1
Press the [STOP] button on the
operational panel during the scanning or
multi-copying.
2
When the menu on the right is displayed,
press the [MEMORY CLEAR] button.
- During scanning: the data is deleted.
- During multi-copying: the data is deleted and its operation stops.
If the waiting data remains, it starts to be outputted.
HUD_PPC_EU.book Seite 57 Sonntag, 13. Februar 2005 2:57 14
58 2.HOW TO MAKE COPIES
2
7. BYPASS COPYING
Bypass Copying
When you want to make copies on thick paper, OHP film, tracing paper, sticker labels or other special sheet,
use the sheet bypass. (Only Thick 1 paper can be set in the drawer "Setting the Drawer for Special Uses"
Page 42).
If the desired size of paper (standard size) is not set in the drawers, or if you want to make copies on non-
standard size paper, make bypass copies.
The modes below are available even in bypass copying if the paper size is specified:
- Dual-page
- Duplex copying
- Image shift
- Edge erase
In these cases, the setting procedures of the following 2 sizes of paper are different.
- Bypass copying on standard size paper
- Bypass copying on non-standard size paper "Bypass Copying on Non-Standard-Size Paper" Page 61
* When copying is finished, the lamp of the [FUNCTION CLEAR] button lights. The bypass copying mode
automatically returns to the default mode by pressing the [FUNCTION CLEAR] button or after a while the
automatic function clear mode works and the settings will be cleared.
* The copier stops its operation when the paper set on the bypass tray has run out even if there is the same
size of copy paper in the drawer. The copier starts again when adding the paper on the bypass tray.
Bypass Copying on Standard Size Paper
1
Place paper on the bypass tray, and then
holding the knob (A), align the guides with
the size of the paper.
- “Ready for bypass feeding” appears.
- Acceptable paper type for bypass copy "Acceptable Copy Paper
Types and Sizes" Page 36
- Place the paper with the side to be copied facing down.
- If you put several sheets on the bypass tray at a time, fan the
paper well before placing it.
- Place the paper so as not to exceed the line indicated on the
guides.
- Do not push the paper forcibly into the entrance of bypass
feeding. It may cause a paper jam.
- Draw the triple paper holder depending on the paper size.
- Raise (B) before placing A3/LD size or larger.
2
Place the original(s).
(A)
(B)
HUD_PPC_EU.book Seite 58 Sonntag, 13. Februar 2005 2:57 14
59
2
3
Press the button that represents the size
of the paper that has been set for A3, A4,
B4 and B5.
When the paper size is not specified, the copying speed may be
lower due to the cleaning operation inside the copier.
4
When the standard size paper other than
A3, A4, B4 and B5 is set, press the
[OTHER SIZE] button.
- See "Setting the [OTHER SIZE] button" Page 69.
5
Press the paper size button
corresponding to the paper that has been
set.
6
Press the [OTHER] button.
HUD_PPC_EU.book Seite 59 Sonntag, 13. Februar 2005 2:57 14
60 2.HOW TO MAKE COPIES
7.BYPASS COPYING (Cont.)
2
7
Press the [MEDIA TYPE] button when the
paper other than plain paper is set.
8
Select the media type corresponding to
the paper that has been set, and then
press the [ENTER] button.
If you select the media type not corresponding to the paper that has
been set, it may cause a problem such as a paper jam, significant
image deterioration, etc.
zSelect other copy modes as required.
9
Press the [START] button.
When copying on OHP films, pick up copies one by one from the
inner tray.
When the exited copies are piled up, they will have more curl and it
may cause this OHP film cannot be projected properly.
HUD_PPC_EU.book Seite 60 Sonntag, 13. Februar 2005 2:57 14
61
2
Bypass Copying on Non-Standard-Size Paper
Non-standard paper falls within the following ranges:
A (Length): 100-297 mm, B (Width): 148-432 mm
1
Follow steps 1 to 2 on "Bypass Copying"
Page 58.
2
Press the [NON STANDARD] button.
3
Key in each dimension (length and width),
or recall the data stored in MEMORY, and
then press the [ENTER] button.
- When using the digital keys to key in the size:
Key in the length and press the [SET] button. Similarly, set the
value for the width.
A
B
HUD_PPC_EU.book Seite 61 Sonntag, 13. Februar 2005 2:57 14
62 2.HOW TO MAKE COPIES
7.BYPASS COPYING (Cont.)
2
- Press the [MEMORY 1] (or [MEMORY 2], [MEMORY 3],
[MEMORY 4]) button, the paper size memorized in the MEMORY
1 appears.
The non-standard size frequently used can be stored in the memory.
Press the [MEMORY 1] (or [MEMORY 2], [MEMORY 3], [MEMORY
4]) button which you want to store, key in the size of length and width
and press the [MEMORY] button.
Data is overwritten.
zSelect other copy modes as required.
4
Press the [START] button.
Storing a Non-Standard Size in MEMORY
It is convenient to store a frequently used non-standard-size paper in memory.
1
Follow steps 1 to 2 on "Bypass Copying"
Page 58.
2
Press the [NON STANDARD] button.
HUD_PPC_EU.book Seite 62 Sonntag, 13. Februar 2005 2:57 14
63
2
3
Press the desired memory number
button.
- When the paper size is '0 mm', the selected memory number
button is vacant.
- When the paper size is displayed, a non-standard size is already
stored in the selected memory number. To delete the settings,
follow step 4. New settings will be rewritten and stored on that
memory number.
4
Key in each dimension using the digital
keys, and then press the [MEMORY]
button.
- Key in the length and press the [SET] button. Similarly, set the
value for the width.
- The paper size is stored in the highlighted Memory Number.
HUD_PPC_EU.book Seite 63 Sonntag, 13. Februar 2005 2:57 14
2
64 2.HOW TO MAKE COPIES
HUD_PPC_EU.book Seite 64 Sonntag, 13. Februar 2005 2:57 14
65
3
3. SETTING OF BASIC COPY
MODES
1. PAPER SELECTION............................................................................................................66
Automatic Paper Selection (APS)........................................................................................66
Manual Paper Selection.......................................................................................................68
Setting the [OTHER SIZE] button ........................................................................................69
Setting the [MIXED ORIGINAL SIZE] ..................................................................................70
2. REDUCTION AND ENLARGEMENT COPYING .................................................................72
3. SELECTING FINISHING MODES .......................................................................................76
Finishing Modes and Finishers (Optional) ...........................................................................76
Sort/Group Copying .............................................................................................................79
Rotate Sort Mode.................................................................................................................80
Staple Sorting ......................................................................................................................81
Magazine Sort & Saddle Stitch Mode (Booklet Mode).........................................................83
Hole Punch Mode (Optional)................................................................................................86
4. DUPLEX COPYING .............................................................................................................88
For Making 1-sided, 2-sided and Book-type Copies............................................................88
5. ORIGINAL MODE................................................................................................................94
6. COPY DENSITY ADJUSTMENT .........................................................................................95
HUD_PPC_EU.book Seite 65 Sonntag, 13. Februar 2005 2:57 14
66 3.SETTING OF BASIC COPY MODES
3
1. PAPER SELECTION
Automatic Paper Selection (APS)
When you place regular-sized originals on the glass or in the reversing automatic document feeder
(optional), the size of the originals is automatically detected, which helps the copier select paper that is the
same size as the originals.
* Depending on the condition of the original, Automatic Paper Selection may not work correctly. In that
case, select the paper size manually. "Manual Paper Selection" Page 68
* This mode can only be used for actual-size (100%) copying.
* Original sizes available for automatic detection "Acceptable Original Types and Sizes/Maximum Number
of Sheets that can be Stored" Page 45
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Confirm that the automatic paper
selection mode (default setting) is
selected on the basic menu.
- If the automatic paper selection mode is not selected, press the
[ZOOM...] button, and then press the [APS] button on the next
screen.
- If “Change direction of original” and “CHANGE DRAWER TO
CORRECT PAPER SIZE” appear, proceed as directed:
HUD_PPC_EU.book Seite 66 Sonntag, 13. Februar 2005 2:57 14
67
3
When the selected drawer size and the original size are the same,
the copier rotates the original data by 90o and makes a copy which
is the same size as the original --- even if those directions differ
(e.g.an A4-size original is set while the same size paper is set in R
direction).
zSelect other copy modes as required.
4
Press the [START] button.
HUD_PPC_EU.book Seite 67 Sonntag, 13. Februar 2005 2:57 14
68 3.SETTING OF BASIC COPY MODES
1.PAPER SELECTION (Cont.)
3
Manual Paper Selection
Automatic Paper Selection cannot be used for highly transparent originals such as OHP films and tracing
paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers
and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer ("Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses" Page 38) or
use the bypass copying ("Bypass Copying" Page 58)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying "Bypass Copying"
Page 58, be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the drawer button representing the
desired paper size or select the paper size
with button.
- Or press the [ZOOM...] button to enter the next screen, and press
the button of the desired paper size.
- "Setting the [OTHER SIZE] button" Page 69
zSelect other copy modes as required.
4
Press the [START] button.
HUD_PPC_EU.book Seite 68 Sonntag, 13. Februar 2005 2:57 14
69
3
Setting the [OTHER SIZE] button
When the original or the paper size is specified and you want to use the paper size not displayed on the
menu (except for non-standard size), press the [OTHER SIZE] button to select the size. This function allows
the [OTHER] button to recognize the size you use.
- The initial setting for this button is COMP.
1
Press the [ZOOM...] button to enter the
setting menu of the original or paper size,
and then press the [OTHER SIZE] button.
2
Press the [PAPER SIZE] button of the
paper corresponding to the size that will
be used.
- If you select 'LT', the [OTHER] button (for both the original and the
paper size) is recognized as LT size.
HUD_PPC_EU.book Seite 69 Sonntag, 13. Februar 2005 2:57 14
70 3.SETTING OF BASIC COPY MODES
1.PAPER SELECTION (Cont.)
3
Setting the [MIXED ORIGINAL SIZE]
When placing different size originals on the reversing automatic document feeder, copy can be made by
setting the [MIXED ORIGINAL SIZE].
Available combination of original size
- A3, A4, A4-R, B4, B5, FOLIO
* The copied image may be dislocated depending on the combination of the original size.
- When copying mixed-sized originals with the Automatic Paper Selection (APS), make sure that the
papers that are the same size as each original are set in the drawers.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- Bypass copying is not available.
2
Adjust the tray guide to the widest
original size, and then align the original
against the front side.
- Place the originals with their face up.
3
Press the [ZOOM...] button to enter the
setting menu of the original or paper size.
4
Press the [MIXED ORIGINAL SIZES]
button.
HUD_PPC_EU.book Seite 70 Sonntag, 13. Februar 2005 2:57 14
71
3
5
Select either the Automatic Paper
Selection ("Automatic Paper Selection
(APS)" Page 66) or Automatic
Magnification Selection mode
("Automatic Magnification Selection
(AMS)" Page 72)
- To make duplex copying, select the automatic magnification
mode.
- You cannot enlarge the copy size from A4 (horizontal) to A3
(vertical) and from LT (horizontal) to LD (vertical).
- When using AMS with Mixed Original Sizes, a “Change direction
of original” message may be displayed.
If this message is displayed proceed as directed.
zSelect other copy modes as required.
6
Press the [START] button.
HUD_PPC_EU.book Seite 71 Sonntag, 13. Februar 2005 2:57 14
72 3.SETTING OF BASIC COPY MODES
3
2. REDUCTION AND ENLARGEMENT COPYING
When placing originals on the original glass, you can copy them at the reducing and enlarging rate of 25 to
400%. For the reversing automatic document feeder (optional), you can make copy at the reducing and
enlarging rate of 25 to 200%.
There are 3 ways of making copies in the Reduction and Enlargement mode:
- Using Automatic Magnification Selection (AMS)
- Specifying both original size and copy size separately
- Using the reduction/enlargement zoom buttons or the one-touch zoom buttons
* Automatic Magnification Selection cannot be used for highly transparent originals such as OHP films and
tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as
newspapers and magazines. For these types of originals, use the other reduction/enlargement modes.
Original sizes available for Automatic Magnification Selection (automatic detection) "Acceptable Original
Types and Sizes/Maximum Number of Sheets that can be Stored" Page 45
* Set the paper size for the “OTHER” button as required ("Setting the [OTHER SIZE] button" Page 69).
When the set originals or paper are a non-standard size other than A3, A4, B4 or B5, you will select the
[OTHER] button on the screen of step 3 below. Before pressing it, you need to make the [OTHER] button
recognize the same size as the originals or paper that have been set.
Automatic Magnification Selection (AMS)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Press the desired drawer (or ,
button), and then press the [ZOOM]
button.
- The copy paper size is selectable on the menu in step 3 as well.
HUD_PPC_EU.book Seite 72 Sonntag, 13. Februar 2005 2:57 14
73
3
3
Press the [AMS] button.
- "Setting the [OTHER SIZE] button" Page 69
4
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- The built-in sensors automatically detect the size of the original(s)
and compute the reproduction ratio with the specified paper size
respectively.
- If “Change direction of original” appear, proceed as directed:
zSelect other copy modes as required.
5
Press the [START] button.
Specifying Both Original Size and Copy Size
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the desired drawer (or ,
button), and then the [ZOOM] button.
- The copy paper size is selectable on the menu in step 4 as well.
HUD_PPC_EU.book Seite 73 Sonntag, 13. Februar 2005 2:57 14
74 3.SETTING OF BASIC COPY MODES
2.REDUCTION AND ENLARGEMENT COPYING (Cont.)
3
4
Press the [ORIGINAL SIZE] button that
represents the size of the original.
- Using the original size and copy size, the correct reproduction
ratio is computed and displayed on the screen.
- "Setting the [OTHER SIZE] button" Page 69
zSelect other copy modes as required.
5
Press the [START] button.
Using the Reduction/Enlargement Zoom Buttons or One-touch Zoom Buttons
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the drawer button (or , button)
representing the desired copy paper size,
and then press the [ZOOM] button.
- The copy paper size is selectable on the screen in step 4 as well.
HUD_PPC_EU.book Seite 74 Sonntag, 13. Februar 2005 2:57 14
75
3
4
Press the [UP] (or [DOWN]) button to set
the desired reproduction ratio.
- Each time you press either button, the reproduction ratio changes
by 1%. Holding down the button changes it continuously.
- You can select the reproduction ratio by pressing the [400%],
[200%], [100%], [50%] or [25%] button directly. (When placing the
originals on the reversing automatic document feeder (optional),
you cannot select [400%] button.)
- "Setting the [OTHER SIZE] button" Page 69
zSelect other copy modes as required.
5
Press the [START] button.
HUD_PPC_EU.book Seite 75 Sonntag, 13. Februar 2005 2:57 14
76 3.SETTING OF BASIC COPY MODES
3
3. SELECTING FINISHING MODES
Finishing Modes and Finishers (Optional)
The functions available differ depending on whether a finisher is installed and which type of finisher (MJ-
1022, MJ-1023, MJ-1024, MJ-5004 and MJ-5005) it is.
* The touch panel used in this chapter appears when the optional saddle-stitch finisher (MJ-1024) with hole
punch unit (MJ-6004) is installed in your copier.
Type of Finishing Mode
- MJ-1024: Saddle-stitch finisher
- MJ-1023: Multi-staple finisher
- MJ-1022: Single-staple finisher (option for e-STUDIO350 only)
- MJ-5004: Job separator
- MJ-5005: Offset tray
- MJ-6004: Hole punch unit
Confirm the finishing mode type of your equipment with the following table.
Y: Available
N: Not available
Finishing Type of finishing mode
Sort/
Group
Rotate
sort
Staple
sort
Magazine
sort
Magazine sort
+ Saddle stitch
Saddle
stitch
Hole
punch
MJ-1024 + MJ-6004 Y Y Y Y Y Y Y
MJ-1024 Y Y Y Y Y Y N
MJ-1023 + MJ-6004 Y Y Y Y N N Y
MJ-1023 Y Y Y Y N N N
MJ-1022 Y Y Y Y N N N
MJ-5004 Y Y N Y N N N
MJ-5005 Y Y N Y N N N
No finisher Y Y N Y N N N
HUD_PPC_EU.book Seite 76 Sonntag, 13. Februar 2005 2:57 14
77
3
Names of each Finisher (Optional)
1: Trays
2: Upper cover
3: Hole punch unit (MJ-6004)
4: Front cover
5: Saddle stitch tray
When the finisher trays reach their maximum loading capacity ("2.SPECIFICATIONS OF OPTIONS"
Page 301), “Remove paper from the finisher” appears.
Remove the copied paper from the trays and the copier automatically resumes making copies.
MJ-1024 MJ-1023
MJ-1022
2
3
4
1
1
2
3
4
5
1
HUD_PPC_EU.book Seite 77 Sonntag, 13. Februar 2005 2:57 14
78 3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Names of each Inner Finisher (Optional)
1: Trays
2: Paper stopper
When the finisher trays reach their maximum loading capacity ("2.SPECIFICATIONS OF OPTIONS"
Page 301), “Remove paper from the finisher” appears.
Remove the copied paper from the trays and the copier automatically resumes making copies.
MJ-5004 MJ-5005
1
2
1
HUD_PPC_EU.book Seite 78 Sonntag, 13. Februar 2005 2:57 14
79
3
Sort/Group Copying
To make multiple copies, you can select the sort mode or group mode as necessary.
- Example of making 5 sets of copies from 5-page originals
1: Sort copying
2: Group copying
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
When originals are placed in the reversing automatic document
feeder (optional), the sort mode is automatically selected.
4
Press the [SORT] (or [GROUP]) button.
zSelect other copy modes as required.
5
Press the [START] button.
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
4
4
4
4
4
3
3
3
3
3
5
5
5
5
5
5
4
3
2
1
2
2
2
2
2
1
1
1
1
1
2
1
HUD_PPC_EU.book Seite 79 Sonntag, 13. Februar 2005 2:57 14
80 3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Rotate Sort Mode
In this copying mode, as sets of copies are output to the internal tray, the sets are alternated -lengthwise
and crosswise- on top of each other. (Optional drawer or Stack Feeder Bypass is required.) A4/A4-R, B5/
B5-R, LT/LT-R paper is available in this mode.
* This mode cannot be used in the Automatic Paper Selection mode.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4
Press the [ROTATE SORT] button.
zSelect other copy modes as required.
5
Press the [START] button.
HUD_PPC_EU.book Seite 80 Sonntag, 13. Februar 2005 2:57 14
81
3
Staple Sorting
When the finisher (optional) is installed, you can perform automatic stapling for every set. 3 staple positions
can be selected when installing the saddle-stitch finisher (MJ-1024) or multi-staple finisher (MJ-1023).
* The paper weight should be in the range of 64-105 g/m2 for the saddle-stitch finisher (MJ-1024) or multi-
staple finisher (MJ-1023), and 64-80 g/m2 for the single-staple finisher (MJ-1022). Special paper such as
OHP films or labels is excluded.
* Stapling will not work when copied paper of different widths are mixed.
-Example of selecting the [FRONT STAPLE-1] button
Setting Staple Sort Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
AB
AB
AB
HUD_PPC_EU.book Seite 81 Sonntag, 13. Februar 2005 2:57 14
82 3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
4
Press the [FRONT STAPLE-1] (or
[DOUBLE STAPLE], [REAR STAPLE])
button.
- Only the [FRONT STAPLE-1] button is available when installing
the single-staple finisher (MJ-1022).
zSelect other copy modes as required.
5
Press the [START] button.
If the paper quantity exceeds the maximum number of sheets that
can be stapled, the finisher automatically enters the sort mode.
Maximum Number of Sheets that can be Stapled
-Saddle-stitch finisher (MJ-1024) and multi-staple finisher (MJ-1023)
When Plain paper and Thick 1 paper are loaded, the maximum number of sheets that can be stapled is
the same as that of Thick 1 paper.
-Single-staple finisher (MJ-1022)
* Tray load capacity "2.SPECIFICATIONS OF OPTIONS" Page 301
Paper size Paper type (weight)
Plain paper (64-80 g/m2) Thick 1 (81-105 g/m2)
A4, B5, LT 50 sheets 30 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R 30 sheets 15 sheets
Paper size Paper type (weight)
Plain paper (64-80 g/m2)
A4, A4-R, B5, LT, LT-R 30 sheets
B4, LG 20 sheets
A3, FOLIO, LD, COMP 15 sheets
HUD_PPC_EU.book Seite 82 Sonntag, 13. Februar 2005 2:57 14
83
3
Magazine Sort & Saddle Stitch Mode (Booklet Mode)
When the Magazine Sort mode is selected, 1-sided originals can be copied and bound like magazines or
booklets. When the Saddle-stitch finisher (optional, MJ-1024) is installed, you can select the saddle stitch
mode that will automatically fold and staple the centre of the document. A3, A4-R, B4, LD and LT-R are
available.
* Special paper such as OHP films or labels is excluded.
* The paper weight should be in the range of 64-105 g/m2.
- When [MAGAZINE SORT] is selected
- When [MAGAZINE SORT & SADDLE STITCH] is selected
- When [SADDLE STITCH] is selected
* You can also select the Magazine Sort mode from the edit menu. "6.MAGAZINE SORT (FROM THE
EDITING MENU)" Page 111
* When placing the portrait original in short edge feed direction in the reversing automatic document feeder,
copies can be made correctly with Image Direction setting. See "14.DIRECTION OF COPY IMAGES IN
“1 TO 2” AND “2 TO 1”" Page 129.
Setting Magazine Sort & Saddle Stitch Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
12
3
2
1
112
94
76
76
12
3
2
1
58
310
112 76
HUD_PPC_EU.book Seite 83 Sonntag, 13. Februar 2005 2:57 14
84 3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
2
Set the paper size.
- For drawer feeding "Manual Paper Selection" Page 68, step 3
- For bypass feeding "Bypass Copying on Standard Size Paper"
Page 58, step 4
3
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- When placing originals in the reversing automatic document
feeder (optional), set them by referring to the order of previous
pages in the illustrations.
- When placing them on the glass, place the first page of the
originals first if the [MAGAZINE SORT] or the [MAGAZINE SORT
& SADDLE STITCH] is selected. If the [SADDLE STITCH] is
selected, set them in the order of pages 12-1, (2-11), 10-3 (4-9),
then 8-5, (6-7) by referring to the illustration above as an example.
4
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
5
Press the [MAGAZINE SORT] (or
[MAGAZINE SORT & SADDLE STITCH] or
[SADDLE STITCH]) button.
When the saddle stitch mode is used for A3, B4 and LD size, that is,
when the [MAGAZINE SORT & SADDLE STITCH] button or the
[SADDLE STITCH] button is selected, raise the stopper of the
saddle stitch tray.
zSelect other copy modes as required.
6
Press the [START] button.
- When placing original(s) on the glass, follow steps 5 to 6 on page
"When Coming Across the Situations below" Page 53.
HUD_PPC_EU.book Seite 84 Sonntag, 13. Februar 2005 2:57 14
85
3
Available Conditions for Saddle Stitch
- A cover of 64-209 g/m2 can be added. In this case, the cover is included in the maximum capacity for
saddle stitch.
- When paper of different weights is loaded, the maximum number of sheets that can be stapled is that of
the paper with the highest weight.
Paper size Paper
weight
Maximum
capacity for
saddle stitch
Tray load capacity
A3, A4-R,
B4, LD, LT-R
Plain paper
64 g/m2
15 sheets Copying of 11-15 sheets: 10 sets
Copying of 6-11 sheets: 20 sets
Copying of 5 sheets or less: 25 sets *1
*1.The tray load capacity for the weight of 64 g/m2 and 80 g/m2 is not changed when a cover is added.
Plain paper
80 g/m2
15 sheets Copying of 11-15 sheets: 10 sets
Copying of 6-11 sheets: 20 sets
Copying of 5 sheets or less: 25 sets *1
Thick 1
90 g/m2
10 sheets Copying of 6-11 sheets: 15 sets (Adding a cover: 5 sets)
Copying of 5 sheets or less: 25 sets (adding a cover: 5 sets)
Thick 1
105 g/m2
10 sheets Copying of 6-10 sheets: 15 sets (Adding a cover: 5 sets)
Copying of 5 sheets or less: 25 sets (Adding a cover: 5 sets)
HUD_PPC_EU.book Seite 85 Sonntag, 13. Februar 2005 2:57 14
86 3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole
punch your copies.
* The paper weight should be in the range of 64-209 g/m2. Special paper such as OHP files or labels is
excluded.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4
Press the [HOLE PUNCH] button.
zSelect other copy modes as required.
5
Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
HUD_PPC_EU.book Seite 86 Sonntag, 13. Februar 2005 2:57 14
87
3
* The paper mentioned above is Toshiba-recommended paper.
Specifications and appearance are subject to change without
notice in the interest of product improvement
Number of punch holes and hole
diameter Available paper sizes
Japan and most of Europe
(MJ-6004E)
2 holes
(6.5 mm dia.)
A3, A4, A4-R, B4, B5, B5-R, FOLIO,
LD, LG, LT, LT-R, COMP
France
(MJ-6004F)
4 holes
(6.5 mm dia.: 80 mm pitch)
A3, A4, LD, LT
Sweden
(MJ-6004S)
4 holes
(6.5 mm dia.: 70.21 mm pitch)
A3, A4, A4-R, B4, B5, B5-R, FOLIO,
LD, LG, LT, LT-R, COMP
HUD_PPC_EU.book Seite 87 Sonntag, 13. Februar 2005 2:57 14
88 3.SETTING OF BASIC COPY MODES
3
4. DUPLEX COPYING
For Making 1-sided, 2-sided and Book-type Copies
This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of
copying (1-sided or 2-sided). Duplex copying is available for the plain paper (64-80 g/m2) and thick 1 paper
(81-105 g/m2).
-12-
-13-
-15- -12- -13- -15-
-13-
-13-
1
2
5
3
4
HUD_PPC_EU.book Seite 88 Sonntag, 13. Februar 2005 2:57 14
89
3
1. 1-Sided Originals to 1-Sided Copies (default setting)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Confirm that the [1 1 SIMPLEX] mode is
selected in the basic menu.
- If the “1-SIDED 1-SIDED” mode is not selected, press the
button (highlighted) in the menu on the right, and then press the
[1 1 SIMPLEX] button on the next screen.
zSelect other copy modes as required.
4
Press the [START] button.
2. 1-Sided Originals to 2-Sided Copies
The use of Image Direction will create the booklet output when copying landscape oriented originals. See
"14.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”" Page 129 for details.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
HUD_PPC_EU.book Seite 89 Sonntag, 13. Februar 2005 2:57 14
90 3.SETTING OF BASIC COPY MODES
4.DUPLEX COPYING (Cont.)
3
3
On the basic menu, press the highlighted
button on the right.
4
Press the [1 2 DUPLEX] button.
zSelect other copy modes as required.
5
Press the [START] button.
- When placing an original on the glass, follow step 5 to 6 on page
"Copying Procedure" Page 51 continuously.
3. 2-Sided Originals to 2-Sided Copies
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
On the basic menu, press the highlighted
button on the right.
HUD_PPC_EU.book Seite 90 Sonntag, 13. Februar 2005 2:57 14
91
3
4
Press the [2 2 DUPLEX] button.
zSelect other copy modes as required.
5
Press the [START] button.
- When placing an original on the glass, follow step 5 to 6 on page
"Copying Procedure" Page 51 continuously.
4. 2-Sided Originals to 1-Sided Copies
Image Direction can be used if the orientation of the output is alternating between pages when using
landscape originals. See "14.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”" Page 129 for
details.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
On the basic menu, press the highlighted
button on the right.
4
Press the [2 1 SPLIT] button.
zSelect other copy modes as required.
5
Press the [START] button.
- When placing the original on the glass, copy the one side of the
original and turn it over to copy the other side.
HUD_PPC_EU.book Seite 91 Sonntag, 13. Februar 2005 2:57 14
92 3.SETTING OF BASIC COPY MODES
4.DUPLEX COPYING (Cont.)
3
5. Book-type Originals to 2-Sided Copies
* Acceptable paper size for this function are A4 or B5 only.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
On the basic menu, press the highlighted
button on the right.
3
Press the [BOOK 2] button.
4
Select the book copying type.
- Press the [RIGHT RIGHT] button if copying should start at a
right-hand page and end at a right-hand page and also choose
from among the [RIGHT LEFT], [LEFT LEFT] and [LEFT
RIGHT] buttons as well.
HUD_PPC_EU.book Seite 92 Sonntag, 13. Februar 2005 2:57 14
93
3
5
Select A4 or B5 copy size.
6
If you need a binding space, select the
book margin mode from the Image Shift
function ("Creating a Bookbinding
Margin" Page 103).
zSelect other copy modes as required.
7
Place the first page(s) on the glass, and
then press the [START] button.
- If you do not copy your originals from the first page, the copies will
not be arranged in the same order as the original.
- Centre the book on the yellow indicator line with its bottom toward
you. "Book-type Originals" Page 47
8
Turn to the next page, set the book again
and press the [START] button.
- Pressing the [YES] button and then the [START] button also
continues copying.
- Repeat the procedure above until all the originals have been
scanned.
9
After all the originals are scanned, press
the [FINISHED] button.
- Press the [COPY FINAL PAGE] button if the last original has only
one page.
HUD_PPC_EU.book Seite 93 Sonntag, 13. Februar 2005 2:57 14
94 3.SETTING OF BASIC COPY MODES
3
5. ORIGINAL MODE
By selecting an original mode according to the type of your originals, you can make copies with the suitable
image.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
On the basic menu, press the highlighted
button on the right.
4
According to the type of your original,
choose the most suitable image type
mode by pressing one of the following
buttons:
- [TEXT/PHOTO]: Original with text and printed image mixed
(default setting)
- [TEXT]: Original with text only (or text and line artwork)
- [PHOTO]: Original with photos printed on photographic paper
HUD_PPC_EU.book Seite 94 Sonntag, 13. Februar 2005 2:57 14
95
3
6. COPY DENSITY ADJUSTMENT
There are 2 types of image density adjustments: automatic mode and manual mode.
In the automatic mode, the density of each original is detected automatically and the optimum image density
is selected. In the manual mode, you can select the desired level of image density. Adjust the density with
this mode depending on the original condition.
Automatic Copy Density Modes
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [AUTO] button.
zSelect other copy modes as required.
4
Press the [START] button.
Manual Copy Density Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press either the or button to adjust
the copy density to the desired level.
- Each time you press either the or button, your copies will
become lighter or darker respectively.
zSelect other copy modes as required.
4
Press the [START] button.
HUD_PPC_EU.book Seite 95 Sonntag, 13. Februar 2005 2:57 14
3
96 3.SETTING OF BASIC COPY MODES
HUD_PPC_EU.book Seite 96 Sonntag, 13. Februar 2005 2:57 14
97
4
4. IMAGE EDITING AND
IMAGE ADJUSTMENT
1. BACKGROUND ADJUSTMENT..........................................................................................98
2. SHARPNESS ADJUSTMENT..............................................................................................99
HUD_PPC_EU.book Seite 97 Sonntag, 13. Februar 2005 2:57 14
98 4.IMAGE EDITING AND IMAGE ADJUSTMENT
4
1. BACKGROUND ADJUSTMENT
This function allows you to adjust the density of the original’s background or to avoid copying the back side
of originals.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [IMAGE] button to enter the
image menu, and then press the
[BACKGROUND ADJUSTMENT] button.
4
Press the [LIGHT] (or [DARK]) button to
adjust the density.
5
Press the [ENTER] button.
zSelect other copy modes as required.
6
Press the [START] button.
Canceling the Background Adjustment
There are 2 ways for clearing the setting.
- Press the [LIGHT] or [DARK] button on the Background column
to move the indicator to 0, and then press the [ENTER] button.
- Press the [DEFAULT] button, and then press the [ENTER] button.
HUD_PPC_EU.book Seite 98 Sonntag, 13. Februar 2005 2:57 14
99
4
2. SHARPNESS ADJUSTMENT
This function allows you to emphasize the letters and edges of images.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [IMAGE] button to enter the
image menu, and then press the
[SHARPNESS] button.
4
Press the [SOFT] (or [SHARP]) button.
- Pressing the [SOFT] button suppresses the moire fringe, while
pressing the [SHARP] button emphasizes the letters and
sharpens the fine lines.
5
Press the [ENTER] button.
zSelect other copy modes as required.
6
Press the [START] button.
Canceling the Sharpness Adjustment
There are 2 ways for clearing the setting.
- Press the [SOFT] or [SHARP] button on the Sharpness column to
move the indicator to 0, and then press the [ENTER] button.
- Press the [DEFAULT] button, and then press the [ENTER] button.
HUD_PPC_EU.book Seite 99 Sonntag, 13. Februar 2005 2:57 14
4
100 4.IMAGE EDITING AND IMAGE ADJUSTMENT
HUD_PPC_EU.book Seite 100 Sonntag, 13. Februar 2005 2:57 14
101
5
5. USING THE EDITING
FUNCTIONS
1. IMAGE SHIFT....................................................................................................................102
2. EDGE ERASE....................................................................................................................105
3. BOOK CENTRE ERASE....................................................................................................106
4. DUAL-PAGE.......................................................................................................................107
5. 2 IN 1/4 IN 1.......................................................................................................................109
6. MAGAZINE SORT (FROM THE EDITING MENU)............................................................ 111
7. IMAGE EDITING................................................................................................................113
Trimming/Masking.............................................................................................................. 113
Mirror Image.......................................................................................................................115
Negative/Positive Reversal ................................................................................................116
8. X-Y ZOOM .........................................................................................................................117
9. COVER COPYING............................................................................................................. 118
10.SHEET INSERTION MODE...............................................................................................121
11.TIME & DATE STAMP........................................................................................................123
12.PAGE NUMBERING ..........................................................................................................124
13.JOB BUILD ........................................................................................................................126
14.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1” .............................................129
15.DIRECTION OF DUPLEX COPY IMAGES IN “2 TO 2”.....................................................131
16.CONTINUOUS/SINGLE ORIGINAL FEEDING..................................................................132
HUD_PPC_EU.book Seite 101 Sonntag, 13. Februar 2005 2:57 14
102 5.USING THE EDITING FUNCTIONS
5
1. IMAGE SHIFT
A margin for binding is created by shifting the original image to either the right or left side. You can also
create binding margins in the centre (inner margin) when using Book-Type Originals to 2-sided copies (see
"5. Book-type Originals to 2-Sided Copies" Page 92).
Creating a Right or Left Margin
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [IMAGE SHIFT]
button.
4
Press the [LEFT] (or [RIGHT]) button
according to your desired binding side.
HUD_PPC_EU.book Seite 102 Sonntag, 13. Februar 2005 2:57 14
103
5
5
Adjust the width of binding margin, and
then press the [ENTER] button.
- The default width of the margin is 7 mm.
- To adjust the width, press the [0 mm] or [30 mm] button to select
the desired number, and then press the [ENTER] button.
- In duplex copying, margins on the back are created on the other
side of those in the front.
"4.DUPLEX COPYING" Page 88
zSelect other copy modes as required.
6
Press the [START] button.
Creating a Bookbinding Margin
When Book Margin is selected, use it in conjunction with the Duplex Copying mode from book-type originals
("5. Book-type Originals to 2-Sided Copies" Page 92).
Acceptable paper sizes for this function are A4, B5 and LT only.
1
Press the [EDIT] button to enter the edit
menu, and then press the [IMAGE SHIFT]
button.
2
Press the [BOOK] button.
HUD_PPC_EU.book Seite 103 Sonntag, 13. Februar 2005 2:57 14
104 5.USING THE EDITING FUNCTIONS
1.IMAGE SHIFT (Cont.)
5
3
Adjust the width of the margin, and then
press the [ENTER] button.
- The default width of the margin is 7 mm (Book binding margin is
14 mm.).
- To adjust the width, press the [2 mm] or [30 mm] button to select
the desired number, and then press the [ENTER] button.
HUD_PPC_EU.book Seite 104 Sonntag, 13. Februar 2005 2:57 14
105
5
2. EDGE ERASE
If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, use
Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black stains.
* This function is available in only case of the standard-size original.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [EDGE ERASE]
button.
4
Adjust the width of the white border, and
then press the [ENTER] button.
- The default width of the white border is 5 mm.
- To adjust the width, press the [5 mm] or [20 mm] button to select
the desired number, and then press the [ENTER] button.
zSelect other copy modes as required.
5
Press the [START] button.
HUD_PPC_EU.book Seite 105 Sonntag, 13. Februar 2005 2:57 14
106 5.USING THE EDITING FUNCTIONS
5
3. BOOK CENTRE ERASE
This feature allows you to erase the shadow in the centre of a book original.
1: Before
2: After the book centre has been erased
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [BOOK CENTRE
ERASE] button.
4
Adjust the width of the book centre erase
margin, and then press the [ENTER]
button.
- The default width of the book centre erase margin is 10 mm.
- To adjust the width, press the [2 mm] or [50 mm] button to select
the desired number, and then press the [ENTER] button.
zSelect other copy modes as required.
5
Press the [START] button.
12
HUD_PPC_EU.book Seite 106 Sonntag, 13. Februar 2005 2:57 14
107
5
4. DUAL-PAGE
Utilizing this feature allows the facing pages of a book or magazine to be copied page by page onto 2
separate sheets of paper or duplex-copied on one sheet. There is no need to move the original on the glass.
You can also place a pair of A4 (or B5, LT) sized originals side by side and copy them on separate sheets
of paper.
* Acceptable paper sizes for this function are A4, B5 and LT only.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Press the [EDIT] button to enter the edit
menu, and then press the [DUAL PAGE]
button.
3
Press the [1 SIDE] (or [2 SIDE]) button.
- Select the [1 SIDE] button to make copies of the facing pages on
2 separate sheets of paper page by page. Select the [2 SIDE]
button to make duplex copies of them on one sheet.
4
If you need a binding margin, set the right
or left margin.
- "Creating a Right or Left Margin" Page 102
-12- -13- -12- -13-
HUD_PPC_EU.book Seite 107 Sonntag, 13. Februar 2005 2:57 14
108 5.USING THE EDITING FUNCTIONS
4.DUAL-PAGE (Cont.)
5
5
Press the [BASIC] button to enter the
basic menu, and then select A4 (or B5, LT)
copy size.
zSelect other copy modes as required.
6
Place the first page(s) to be copied on the
glass, and then press the [START] button.
- If you do not copy your originals from the first page, the copies will
not be arranged in the same order as the original.
- Centre the book on the yellow indicator line with the bottom
toward you. "Book-type Originals" Page 47
7
Turn to the next page, set the book again,
and then press the [START] button.
- Repeat the above procedure until all the originals have been
scanned.
8
After all the originals have been scanned,
press the [FINISHED] button.
- Press the [COPY FINAL PAGE] button if the last original is 1-
sided page.
HUD_PPC_EU.book Seite 108 Sonntag, 13. Februar 2005 2:57 14
109
5
5. 2 IN 1/4 IN 1
This feature allows multiple originals to be reduced and copied onto a single sheet of paper. There are 2
modes: 2 IN 1 copying, where 2 originals are copied onto a single sheet, and 4 IN 1 copying, where 4
originals are copied onto a single sheet. In addition, duplex 2 IN 1/4 IN 1 modes are available, where four/
eight originals can be copied to 2 sides of a single sheet of paper.
* This mode cannot be used in combination with reduction/enlargement copying.
- 2 IN 1
- 4 IN 1
- 2 IN 1 DUPLEX (a: Side 1, b: Side 2)
* When a copy is turned with the line as a pivot, originals are printed on Side 2 (back face) as shown.
- 4 IN 1 DUPLEX (a: Side 1, b: Side 2)
* When a copy is turned with the line as a pivot, originals are printed on Side 2 (back face) as shown.
aa
bb
aa
b
b
HUD_PPC_EU.book Seite 109 Sonntag, 13. Februar 2005 2:57 14
110 5.USING THE EDITING FUNCTIONS
5.2 IN 1/4 IN 1 (Cont.)
5
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
To make copies onto paper which is not the same size as originals,
press the [ZOOM...] button to display the screen on the right, and
then press the desired paper size and the [AMS] button.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [2 IN 1/4 IN 1]
button.
4
Select the type of image combination.
- Press the [2 IN 1] (or [4 IN 1], [2 IN 1 DUPLEX] or [4 IN 1
DUPLEX]) button.
5
Select the type of the original.
- Press the [1 SIDE] (or [2 SIDE]) button.
zSelect other copy modes as required.
6
Press the [START] button.
- When placing an original on the glass, follow the steps 5 to 6 on
"Copying Procedure" Page 51 continuously.
HUD_PPC_EU.book Seite 110 Sonntag, 13. Februar 2005 2:57 14
111
5
6. MAGAZINE SORT (FROM THE EDITING MENU)
The magazine sort mode allows 1-sided originals to be copied and sorted so that they can be folded and
bound along a centre line like typical magazines or booklets.
Example of copying a 12-page document
- If used in combination with the optional finisher (MJ-1024) equipped with saddle stitch, copies can be
automatically folded in half and stapled along their centre line. (A3, A4-R, B4, LD and LT-R are available.)
* 2 Magazine Sort procedures are available. For this function operated from the BASIC menu when the
finisher (optional) is installed, see "Magazine Sort & Saddle Stitch Mode (Booklet Mode)" Page 83
* When placing the portrait original in short edge feed direction in the reversing automatic document feeder,
copies can be made correctly with Image Direction setting. See "14.DIRECTION OF COPY IMAGES IN
“1 TO 2” AND “2 TO 1”" Page 129.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Select the paper type.
- For drawer feeding "Manual Paper Selection" Page 68, step 3
- For bypass feeding "Bypass Copying on Standard Size Paper"
Page 58, step 4
3
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- When placing them in the reversing automatic document feeder
(optional), set them by referring to the order of pages in the
illustrations above.
- When placing them on the glass, place the first page of the
originals first.
12
3
2
1
112
94
76
76
12
3
2
1
HUD_PPC_EU.book Seite 111 Sonntag, 13. Februar 2005 2:57 14
112 5.USING THE EDITING FUNCTIONS
6.MAGAZINE SORT (FROM THE EDITING MENU) (Cont.)
5
4
Press the [EDIT] button to enter the edit
menu, and then press the [MAGAZINE
SORT] button.
5
Adjust the binding margin, and then press
the [ENTER] button.
- The default width of the margin is 2 mm.
- To adjust the width, press the [2 mm] or [30 mm] button to select
the desired number, and then press the [ENTER] button.
- If the optional finisher (MJ-1024) equipped with the saddle stitch
is installed, copied paper can be automatically stapled along their
centre line. Press the [STAPLE ON] button to staple it.
- Maximum number of sheets that can be stapled. "Available
Conditions for Saddle Stitch" Page 85
zSelect other copy modes as required.
6
Press the [START] button.
- When placing an original on the glass, follow steps 5 to 6 on
"Copying Procedure" Page 51 continuously.
HUD_PPC_EU.book Seite 112 Sonntag, 13. Februar 2005 2:57 14
113
5
7. IMAGE EDITING
Trimming/Masking
You can select an area on an original and copy it with the area trimmed (only the inside of the area copied)
or masked (only the outside of the area copied). 4 rectangular areas can be specified on an original.
* Image editing is only available with standard sized originals.
* If the settings of the original and copy sizes are not made appropriately, the image may not be copied
completely.
1: Trimming
2: Masking
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Press the [EDIT] button to enter the edit
menu, and then press the [EDITING]
button.
3
Press the [TRIM] (or [MASK]) button.
1 2
HUD_PPC_EU.book Seite 113 Sonntag, 13. Februar 2005 2:57 14
114 5.USING THE EDITING FUNCTIONS
7.IMAGE EDITING (Cont.)
5
4
Place an original on the glass to specify
the area.
- Set the original face up with the bottom toward you, fit its top left
corner against the top left corner of the glass, and align it with the
original scale.
5
Using the original scale on the left and the
inner (top) scale, read the position of the
desired area as follows:
- X1 Distance from the top left to the left edge of the specified area.
- X2 Distance from the top left to the right edge of the specified
area.
- Y1 Distance from the top left to the upper edge of the specified
area.
- Y2 Distance from the top left to the lower edge of the specified
area.
4 rectangular areas can be specified on an original.
6
Enter the distance values read in step 5
for the specified area.
- Key in the value for X1 with the digital keys and press the [SET]
button.
- Similarly, set the values for X2, Y1 and Y2.
- When setting X1, X2, Y1 and Y2, the original scale automatically
changes to the next original scale. Set the next original scale
similarly.
7
Press the [ENTER] button.
8
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- Place the original(s) on the glass with its face down, with its
bottom toward you, with its top left aligned against the original
scale on the left side.
zSelect other copy modes as required.
9
Press the [START] button.
HUD_PPC_EU.book Seite 114 Sonntag, 13. Februar 2005 2:57 14
115
5
Mirror Image
Copies are made with images completely reversed (right and left).
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [EDITING]
button.
4
Press the [MIRROR] button.
zSelect other copy modes as required.
5
Press the [START] button.
HUD_PPC_EU.book Seite 115 Sonntag, 13. Februar 2005 2:57 14
116 5.USING THE EDITING FUNCTIONS
7.IMAGE EDITING (Cont.)
5
Negative/Positive Reversal
This function allows you to reverse the black areas on the original as white areas, or vice versa.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [EDITING]
button.
4
Press the [NEG/POS] button.
zSelect other copy modes as required.
5
Press the [START] button.
HUD_PPC_EU.book Seite 116 Sonntag, 13. Februar 2005 2:57 14
117
5
8. X-Y ZOOM
You can make copies with different reproduction ratios set for the X (horizontal) and Y (vertical) directions
in the range of 25 to 400% respectively.
In the following cases, set the reproduction ratio in the range of 25 to 200%.
- When placing the original(s) on the reversing automatic document feeder (optional).
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [XY ZOOM]
button.
4
Set the reproduction ratios for the X
(horizontal) and Y (Vertical) directions
respectively.
- Using the [25%] and [400%] buttons on the screen, set the
reproduction ratio for X and press the [SET] button. Similarly, set
the reproduction ratio for Y.
5
Press the [ENTER] button.
zSelect other copy modes as required.
6
Press the [START] button.
100%
200%
100%
200%
HUD_PPC_EU.book Seite 117 Sonntag, 13. Februar 2005 2:57 14
118 5.USING THE EDITING FUNCTIONS
5
9. COVER COPYING
A top cover and /or back cover (special sheets, e.g, coloured paper) can be added to each set of copies.
1: Adding a blank cover
2: Adding a copied cover
3: Adding a blank cover and a blank back cover
4: Adding a copied cover and blank back cover
When using the cover feature, make sure all paper sources have the same orientation and size.
The cover sheets are placed in the drawer for cover sheet or on the bypass tray.
32
1
32
1
REPORT
2003
REPORT
2003
REPORT
2003
32
1
32
1
REPORT
2003
1
2
3
4
HUD_PPC_EU.book Seite 118 Sonntag, 13. Februar 2005 2:57 14
119
5
1
Place the cover sheet in the drawer for
cover sheet or on the bypass tray.
- When placing it in the drawer for the cover sheet, it is necessary
to set the paper type (cover sheet), size and weight. Setting the
drawer for special use. "Setting the Drawer for Special Uses"
Page 42
- When placing it on the bypass tray, it is necessary to set the paper
size and weight. "Bypass Copying on Standard Size Paper"
Page 58
2
Place paper (other than cover paper) in
the drawer(s).
- "Setting the Drawer for Special Uses" Page 42
- Place the paper of the same size and the same direction as that
of cover.
3
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- When placing an original on the glass, place the first page of your
originals first.
4
Press the [EDIT] button to enter the edit
menu, and then press the [COVER
SHEET] button.
5
Select the desired cover sheet button:
- To add a blank top cover: [TOP BLANK]
- To add a copied top cover: [TOP COPIED]
- To add blank top and back covers: [BOTH BLANK]
- To add copied top and blank back covers: [TOP COPIED BACK
BLANK]
HUD_PPC_EU.book Seite 119 Sonntag, 13. Februar 2005 2:57 14
120 5.USING THE EDITING FUNCTIONS
9.COVER COPYING (Cont.)
5
6
Press the [BASIC] button to enter the
basic menu, and then select the paper
source of the same size and direction as
the cover sheet paper.
- Setting the drawer for cover sheet. "Changing the Paper Size of
the Drawer/Setting the Drawer for Special Uses" Page 38
- Setting the bypass tray. "Bypass Copying" Page 58
zSelect other copy modes as required.
7
Press the [START] button.
When [TOP COPIED] button or [TOP COPIED BACK BLANK]
button is selected, the cover sheet can be copied only on the top
face (single-side) though 1-Sided Original to 2-Sided Copy is used.
HUD_PPC_EU.book Seite 120 Sonntag, 13. Februar 2005 2:57 14
121
5
10. SHEET INSERTION MODE
Special sheets of paper (such as coloured paper) are inserted into a set of copies at the specified pages.
There are 2 types of sheet insertion modes:
1 : Inserting blank sheets before the specified pages
2 : Inserting copied sheets at the specified pages
To make sheet copies, you have to set 2 or 3 drawers (the large capacity feeder can also be used) to the
same paper size and orientation (1 or 2 for special insertion sheets and the other for normal sheets of copy
paper).
1
Place sheets of paper in the drawer for the
sheet insertion.
- "Changing the Paper Size of the Drawer/Setting the Drawer for
Special Uses" Page 38
2
Place plain paper in the drawer(s). (The
same size and direction in step 1)
3
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
4
Press the [EDIT] button to enter the edit
menu, and then press the [SHEET
INSERTION] button.
32
1
1
2
4
REPORT
2003
2
3
1
REPORT
2003
1
2
3
4
HUD_PPC_EU.book Seite 121 Sonntag, 13. Februar 2005 2:57 14
122 5.USING THE EDITING FUNCTIONS
10.SHEET INSERTION MODE (Cont.)
5
5
Press [COPIED] or [BLANK] button.
- To insert copied sheet at the specified page: [COPIED]
- To insert blank sheet before the specified paper: [BLANK]
6
Key in the desired page number (no more
than 3 digits) for insertion and press the
[SET] button.
- On the screen, the page where the first sheet will be inserted is
shown. The example on the right shows the first sheet inserted at
(or before) page 10.
- To specify the next and subsequent pages, repeat step 6. Up to
15 pages can be specified.
- To have different sheets inserted than Insert source 1, select
[INSERT SOURCE 2] and similarly key in the pages where you
want the sheets inserted, then press the [SET] button. In this
case, up to 15 pages in all can be specified for the source 1 and 2.
7
After you have finished specifying the
insertion pages, press the [ENTER]
button.
8
Key in the number of sets (or copies).
zSelect other copy modes as required.
9
Press the [START] button.
HUD_PPC_EU.book Seite 122 Sonntag, 13. Februar 2005 2:57 14
123
5
11. TIME & DATE STAMP
The time and date of the scanning can be added to the copies.
1: Printed at the bottom of the portrait copy
2: Printed at the top of the landscape copy
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [TIME STAMP]
button.
4
Select the orientation ([Short edge] or
[Long edge]) and position (UPPER or
LOWER) of the date and time to be
printed, and then press the [ENTER]
button.
zSelect other copy modes as required.
5
Press the [START] button.
28.01.2004 14:54
28.01.2004 14:54
12
HUD_PPC_EU.book Seite 123 Sonntag, 13. Februar 2005 2:57 14
124 5.USING THE EDITING FUNCTIONS
5
12. PAGE NUMBERING
This feature allows numbers to be added at specified positions on copies.
1: Page number printed at the bottom centre on the portrait copy.
2: Page number printed at the top right on the landscape copy.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [EDIT] button to enter the edit
menu, and then press the [PAGE
NUMBER] button.
4
Select the orientation ([Short edge] or
[Long edge]) and position of the page
number to be printed, and then press the
[ENTER] button.
3
2
1
3
2
1
12
HUD_PPC_EU.book Seite 124 Sonntag, 13. Februar 2005 2:57 14
125
5
5
Key in the starting page number.
- If the start page number is ''1'', just press the [ENTER] button.
zSelect other copy modes as required.
6
Press the [START] button.
HUD_PPC_EU.book Seite 125 Sonntag, 13. Februar 2005 2:57 14
126 5.USING THE EDITING FUNCTIONS
5
13. JOB BUILD
This feature allows you to scan up to 1000 pages of originals with the optimum original mode and image
adjustment respectively, and then copy and store them as a single job.
* Automatic paper selection, Book to 2, Image editing, X-Y zoom, Cover copying, Magazine Sort, 2IN1/
4IN1 and Sheet insertion mode cannot be selected.
1
Place the originals of the 1st job.
- When an original is placed on the original glass, one page is
regarded as one job.
- When originals are placed on the reversing automatic document
feeder or mixed sized originals are set, see the following page.
2
Press the [EDIT] button to enter the edit
menu, and then press the [JOB BUILD]
button.
HUD_PPC_EU.book Seite 126 Sonntag, 13. Februar 2005 2:57 14
127
5
3
Press the [ENTER] button on the screen
to set JOB BUILD.
4
On the Basic screen, set the copy mode,
e-filing/file function, and finishing mode
you want to use for the 1st job.
- Press the [SETTINGS] button to confirm the settings.
- To change the settings, press the [FC] button, and then start the
procedure again from step 1.
Note that the settings for mixed sized originals, paper size to be
copied, finishing mode (unselectable for mixed sized originals),
image shift, book centre erase, time & date stamp, page numbering,
image direction in 2-sided copying, book <-> tablet, e-filing/file
function cannot be changed for each job, from the 2nd job or later.
5
Press the [START] button.
- Scanning the originals of the 1st job starts.
6
After scanning is completed, the [JOB
FINISH] button is displayed on the screen.
Each button has the following functions.
- [JOB FINISH] button: All of the scanned originals are outputted as
the settings, they are stored if this was set, and then the settings
of JOB BUILD are released.
7
Place the originals of the 2nd job.
HUD_PPC_EU.book Seite 127 Sonntag, 13. Februar 2005 2:57 14
128 5.USING THE EDITING FUNCTIONS
13.JOB BUILD (Cont.)
5
8
On the Basic screen, set the settings for
the 2nd job.
- The settings for the 2nd job or later can be changed with regard
to the following functions.
Reproduction ratio, automatic magnification selection, original
size, other size
Scanning mode
Image adjustment mode
Edge erase, dual-page
- When the 1st job is set and 2-sided copying (or 1-sided copying)
is selected, the setting cannot be changed to 1-sided copying (or
2-sided copying) from the 2nd job.
- Press the [SETTING] button to confirm the settings.
- To change the settings, press the [FC] button, and then start the
procedure again from step 1.
- Be aware that copying will be performed in the same modes as
those of the 1st job if the copy modes are not changed.
9
After having completed the settings,
press the [START] button.
- Scanning the originals starts.
- For the 3rd job or later, repeat from step 6 to 9.
- Any number of jobs can be set until the total number of scanned
original pages reaches 1000.
10
After having completed all the settings
and scanning of the originals, press the
[JOB FINISH] button on the Basic screen.
- When copy and e-file/file function are set, storing starts.
HUD_PPC_EU.book Seite 128 Sonntag, 13. Februar 2005 2:57 14
129
5
14.
DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”
When a lengthwise A3, A5 or B4 original is copied under the mode of 1-Sided Originals to 2-Sided Copies,
2-Sided Originals to 1-Sided Copies, this function allows you to adjust the direction for 'open to left' opening.
* This function is not necessary for copying in the direction of 'vertical' opening.
1: Set
2: Non set
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Select 1-Sided Originals to 2-Sided
Copies (or 2-Sided Originals to 1-Sided
Copies).
- "4.DUPLEX COPYING" Page 88
4
Press the [EDIT] button to enter the edit
menu, and then press the [IMAGE
DIRECTION] button.
- If the desired function buttons are not displayed, press the [Next]
button to change the menu.
12
HUD_PPC_EU.book Seite 129 Sonntag, 13. Februar 2005 2:57 14
130 5.USING THE EDITING FUNCTIONS
14.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1” (Cont.)
5
5
Press the [ENTER] button.
zSelect other copy modes as required
6
Press the [START] button.
HUD_PPC_EU.book Seite 130 Sonntag, 13. Februar 2005 2:57 14
131
5
15.
DIRECTION OF DUPLEX COPY IMAGES IN “2 TO 2”
When copying under the mode of 2-Sided Originals to 2-Sided-Copies, this function allows you to rotate the
backside of the original to be copied by 180. It is useful when 'open to left' (Book) originals need to be copied
in 'open to top' (Tablet), and the opposite condition is available.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [2 2 DUPLEX] in the basic
menu.
- "4.DUPLEX COPYING" Page 88
4
Press the [EDIT] button to enter the edit
menu, and then press the [BOOK
TABLET] button.
- If the desired function buttons are not displayed, press the [Next]
button to change the menu.
5
Press the [ENTER] button.
zSelect other copy modes as required
6
Press the [START] button.
HUD_PPC_EU.book Seite 131 Sonntag, 13. Februar 2005 2:57 14
132 5.USING THE EDITING FUNCTIONS
5
16. CONTINUOUS/SINGLE ORIGINAL FEEDING
When using the optional reversing automatic document feeder, you can select the continuous feed mode
(default setting) so that multiple (or single) originals are continuously fed in one by one, or the single feed
mode where an original is automatically pulled in when you insert it and starts being copied.
* When setting the different size of originals "Setting the [MIXED ORIGINAL SIZE]" Page 70
Continuous Feed Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s) on the reversing
automatic document feeder (optional).
- "When Using the Reversing Automatic Document Feeder
(optional)" Page 48
3
Press the [EDIT] button to enter the edit
menu, and then press the [ADF] button.
- If the desired function buttons are not displayed, press the [NEXT]
button to change the menu screen.
4
Press the [ADF] button.
zSelect other copy modes as required.
5
Press the [START] button.
When the number of originals is too large to be set at one time, you
can divide the originals into 2 to 10 sets and set them one after
another. To do so, place the first set of originals first, and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals that should be
scanned.
HUD_PPC_EU.book Seite 132 Sonntag, 13. Februar 2005 2:57 14
133
5
Single-feed Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Press the [EDIT] button to enter the edit
menu, and then press the [ADF] button.
- If the desired function buttons are not displayed, press the [NEXT]
button or [Prev] button to change the menu.
3
Press the [SADF] button.
zSelect other copy modes as required.
4
Place the original on the reversing
automatic document feeder (optional).
- "Inside the Single-feed Mode" Page 50
- The original is automatically pulled in and the screen changes as
shown on the right.
- If there are more originals, set them in the same way. (The same
operation is performed whether or not you press the [YES]
button.)
5
After all originals have been fed through
the reversing automatic document feeder,
press the [FINISHED] button.
- Copying begins.
HUD_PPC_EU.book Seite 133 Sonntag, 13. Februar 2005 2:57 14
5
134 5.USING THE EDITING FUNCTIONS
HUD_PPC_EU.book Seite 134 Sonntag, 13. Februar 2005 2:57 14
135
6
6. STORING ORIGINALS
1. STORE TO e-FILING.........................................................................................................136
2. COPY & FILE.....................................................................................................................139
3. ENTERING LETTERS .......................................................................................................142
HUD_PPC_EU.book Seite 135 Sonntag, 13. Februar 2005 2:57 14
137
6
4
Press the [BOX/FOLDER] button.
- The box list is displayed.
5
Select the box in which you want to store
the data, and then press the [ENTER]
button.
- Select either the “Public box” or the “User box”.
- See the procedure of “e-FILING” for setting a new user box.
"2.SETTING UP BOX" Page 216
6
The document list in the selected box is
displayed. When you want to store the
original(s) in an existing folder, select the
folder and press the [OPEN FOLDER]
button. If you have no folder to be
selected, press the [ENTER] button.
- If you want to store the data in the user box, password entry may
be required to display the list.
- Creating the folder can be performed only via TopAccess. See the
[e-Filing Guide].
7
Press the [DOCUMENT NAME] button to
enter the name of the scanned data.
- The letter entry menu ("3.ENTERING LETTERS" Page 142) is
displayed. A document name can contain up to 64 letters.
HUD_PPC_EU.book Seite 137 Sonntag, 13. Februar 2005 2:57 14
138 6.STORING ORIGINALS
1.STORE TO e-FILING (Cont.)
6
8
Press the [ENTER] button.
9
When “PRINT THIS DOCUMENT?”
appears, press the [YES] button to store
and print the document.
- If you want to store the document without printing, press the [NO]
button.
10
Press the [START] button.
- Storing the original starts.
11
“NEXT ORIGINAL?” appears. If you have
the other originals to be stored, press the
[YES] button. If not, press the [FINISHED]
button.
- When the original is set on the reversing automatic document
feeder (optional) to be scanned in the Continuous Feed mode,
this screen is not displayed.
12
Press the [FUNCTION CLEAR] button to
finish this job.
HUD_PPC_EU.book Seite 138 Sonntag, 13. Februar 2005 2:57 14
139
6
2. COPY & FILE
In this COPY & FILE function, the copied original data can be sent and stored to the Share folder of the hard
disc in the equipment or the specified PC. You can access the data stored in the Share folder directly from
the client PC via network.
* The network administrator has to make settings for storing the original data to the PCs. For details, see
the [Network Administrator's Guide].
* It is recommended to back up the data stored in the Share folder of the hard disc with the client PC via
network.
To use COPY & FILE function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-3010)’,
or ‘optional Printer/Scanner kit (GM-2010)’ is required.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be stored may be restricted.
- Select the copy mode as required.
2
Press the [E-FILING/FILE] button on the
basic screen to enter the filing menu.
3
Press the [COPY & FILE] button.
HUD_PPC_EU.book Seite 139 Sonntag, 13. Februar 2005 2:57 14
140 6.STORING ORIGINALS
2.COPY & FILE (Cont.)
6
4
Press the [FILE NAME] button to enter the
file name of the stored data.
- The letter entry menu is displayed.
A file name can contain up to 64 letters.
5
Select the desired location.
- [MFP LOCAL]: Select when the originals should be stored in the
hard disc in the main equipment. The original data will be stored
under the directory path shown on the screen.
- [REMOTE 1], [REMOTE 2]: Select when the originals should be
stored in the hard disc of user's PC.
The administrator has to make settings to select “REMOTE 1” or
“REMOTE 2”.
For details, see the [Network Administrator’s Guide].
6
Select the desired file format.
- The SCAN folder is automatically created and the original data
will be stored into this folder. If you select “TIFF (SINGLE)”, an
additional folder with the name you entered in step 4 is further
created, and each page will be stored into this folder. You can
access the original data with the client PC via network, by opening
the FILE_SHARE folder in the equipment’s hard disc.
7
After all the settings have been made,
press the [ENTER] button.
8
Press the [START] button.
HUD_PPC_EU.book Seite 140 Sonntag, 13. Februar 2005 2:57 14
141
6
9
“NEXT ORIGINAL?” appears. If you have
the other originals to be stored, press the
[YES] button. If not, press the [FINISHED]
button.
- This screen is displayed when the scanning is performed from the
original glass. It is not displayed from the reversing automatic
document feeder (optional).
HUD_PPC_EU.book Seite 141 Sonntag, 13. Februar 2005 2:57 14
142 6.STORING ORIGINALS
6
3. ENTERING LETTERS
The following screen is provided for entering letters.
* To enter numbers, use the digital keys on the control panel.
The following buttons are used to enter letters.
- [CapsLock] Press this button to switch capital letters and small letters.
- [B Space] Press this button to delete the letter before the cursor.
- [Space] Press this button to enter a space.
- Press these buttons to move the cursor.
- [ENTER] Press this button to fix all entered letters.
- [Cancel] Press this button to cancel entry of letters.
- [Next] Press this button to display the special characters.
- [Shift] Press this button to enter capital letters.
HUD_PPC_EU.book Seite 142 Sonntag, 13. Februar 2005 2:57 14
143
7
7.
SCANNING THE IMAGES
1. SCAN SETTING IN THE TOUCH PANEL .........................................................................144
2. SCAN TO e-FILING ...........................................................................................................146
3. SCAN TO FILE...................................................................................................................150
4. SCAN TO E-MAIL ..............................................................................................................154
HUD_PPC_EU.book Seite 143 Sonntag, 13. Februar 2005 2:57 14
144 7.SCANNING THE IMAGES
7
1. SCAN SETTING IN THE TOUCH PANEL
If the scanning function is used, originals set on the reversing automatic document feeder (optional) or on
the original glass can easily be scanned as image data.
The scanned image data can be sent or stored to the destinations of “SCAN TO e-FILING”, “SCAN TO
FILE” or “SCAN TO E-MAIL”.
* See the [e-Filing Guide] about how to save the data to PCs.
To use scanning function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-3010)’, or
‘optional Printer/Scanner kit (GM-2010)’ is required.
Scanning Procedure
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- Originals acceptable to be set "2.SETTING ORIGINALS"
Page 45
- When placing an original on the glass "When Placing an Original
on the Glass" Page 46
- When placing the original on the reversing automatic document
feeder (optional) "16.CONTINUOUS/SINGLE ORIGINAL
FEEDING" Page 132
2
Press the [SCAN] button on the control
panel to enter the scan menu.
- The basic scan menu is displayed.
3
Select the desired scan mode and press
the button.
- The screen on the right is displayed as an example of selecting
SCAN TO E-FILING.
- To select SCAN TO E-FILING "2.SCAN TO e-FILING" Page
146
To select SCAN TO FILE "3.SCAN TO FILE" Page 150
To select SCAN TO E-MAIL "4.SCAN TO E-MAIL" Page 154
HUD_PPC_EU.book Seite 144 Sonntag, 13. Februar 2005 2:57 14
145
7
4
Set the scanning conditions using the
buttons on the touch panel and the digital
keys.
- Press the [Next] or [Prev] button to switch the screen and make
necessary settings. After having completed all the settings, press
the [ENTER] button.
5
Press the [SCAN!] button.
6
“To continue, place document on glass.
And press the Scan!” appears. If you want
to continue scanning, press the [SCAN!]
button. If you want to finish scanning,
press the [JOB FINISH] button.
- When the original is set on the reversing automatic document
feeder (optional) to be scanned in the Continuous Feed mode,
this screen is not displayed.
- If you want to cancel the storage of the scanned data, press the
[JOB CANCEL] button.
- You can change the setting of the original type and scanning
conditions using the [EDIT] button before pressing the [SCAN!]
button.
HUD_PPC_EU.book Seite 145 Sonntag, 13. Februar 2005 2:57 14
146 7.SCANNING THE IMAGES
7
2. SCAN TO e-FILING
In this function, the scanned original data can be stored in the e-Filing. During scanning, you can perform
the SCAN TO e-FILING or the SCAN TO E-MAIL simultaneously, as required. After storing the original data,
you can print it at any time. You can scan up to 200 sheets per 1 job.
To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set
box since the installation of the equipment, and it will be used to store documents that any user may need
to work with. The user box is the one created by the user, and, if password is set, you need to enter the
password correctly.
Before storing the original data in e-Filing, you need to set up the user boxes. For setting up the user boxes
and printing the stored documents, see "2.SETTING UP BOX" Page 216 and "7.PRINTING STORED
DOCUMENT" Page 225.
* It is recommended to back up the data on the equipment's hard disc to prevent loss of data. You can back
it up with the client PC using the File Downloader. See the [e-Filing Guide] for details.
To use SCAN TO e-FILING function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-
3010)’, or ‘optional Printer/Scanner kit (GM-2010)’ is required.
You can also store the copied original data in the e-Filing using the copy operation. ("1.STORE TO e-
FILING" Page 136) However, when you use the original data with the client PC via network, it is
recommended to store the original data using the scanning operation explained here, rather than using the
copy operation.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be scanned may be restricted.
The reversing automatic document feeder (optional) enables
consecutive scanning of more than one original.
2
Press the [SCAN] button on the control
panel to enter the scan menu.
HUD_PPC_EU.book Seite 146 Sonntag, 13. Februar 2005 2:57 14
147
7
3
Press the [SCAN TO E-FILING] button.
4
Press the [BOX/FOLDER] button.
- The box list is displayed.
5
Select the box in which you want to store
the data and press the [ENTER] button.
- Select either the “Public box” or the “User box”.
- See the procedure of “e-FILING” for setting the user box.
"2.SETTING UP BOX" Page 216
6
The document list in the selected box is
displayed. When you want to store the
original(s) in an existing folder, select the
folder and press the [OPEN FOLDER]
button. If you have no folder to be
selected, press the [ENTER] button.
- If you want to store the data in the user box, password entry may
be required to display the list.
- Creating the folder can be performed only via TopAccess. See the
[e-Filing Guide].
HUD_PPC_EU.book Seite 147 Sonntag, 13. Februar 2005 2:57 14
148 7.SCANNING THE IMAGES
2.SCAN TO e-FILING (Cont.)
7
7
Press the [DOCUMENT NAME] button to
enter the name of the scanned data.
- The letter entry menu (see "3.ENTERING LETTERS" Page
142) is displayed. A document name can contain up to 64 letters.
- Press the [ENTER] button on the letter entry menu.
8
Press the [EDIT] button to set the original
type and size, and the scanning
conditions.
- Press the [Next] or the [Prev] button to switch the screen and
make necessary settings. After having completed all the settings,
press the [ENTER] button.
9
Press the [ENTER] button.
HUD_PPC_EU.book Seite 148 Sonntag, 13. Februar 2005 2:57 14
149
7
10
Press the [SCAN!] button.
If the “SCAN TO FILE” or the “SCAN TO E-MAIL” button is pressed
to make the setting before pressing the [SCAN!] button, the
specified 2 jobs can be performed simultaneously.
11
“To continue, place document on glass.
And press Scan!” appears. If you want to
finish scanning, press the [JOB FINISH]
button.
- If you want to continue scanning, press the [SCAN!] button.
- When the original is set on the reversing automatic document
feeder (optional) to be scanned in the Continuous Feed mode,
this screen is not displayed.
- You can change the original size, type and scanning conditions by
pressing the [EDIT] button for the next scanning.
- If you want to cancel the storage of the scanned data, press the
[JOB CANCEL] button.
HUD_PPC_EU.book Seite 149 Sonntag, 13. Februar 2005 2:57 14
150 7.SCANNING THE IMAGES
7
3. SCAN TO FILE
In this SCAN TO FILE function, the scanned original data can be sent and stored to the Share folder of the
hard disc in the equipment or the specified PC. You can scan up to 1000 sheets per 1 job. You can access
the data stored in the Share folder directly from the client PC via network.
* The network administrator has to make settings for storing the original data to the PCs. For details, see
the [Network Administrator's Guide].
* It is recommended to back up the data stored in the Share folder of the hard disc with the client PC via
network.
To use SCAN TO FILE function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-
3010)’, or ‘optional Printer/Scanner kit (GM-2010)’ is required.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be scanned may be restricted.
The reversing automatic document feeder (optional) enables
consecutive scanning of more than one original.
2
Press the [SCAN] button on the control
panel to enter the scan menu.
3
Press the [SCAN TO FILE] button.
HUD_PPC_EU.book Seite 150 Sonntag, 13. Februar 2005 2:57 14
151
7
4
Press the [FILE NAME] button to enter the
file name of the scanned data.
- The letter entry menu is displayed. A file name can contain up to
45 letters.
- After entering the letters, be sure to press the [ENTER] button.
5
Select the desired location.
- [MFP LOCAL]: Select when the originals should be stored in the
hard disc in the main equipment. The original data will be stored
under the directory path shown on the screen.
- [REMOTE 1], [REMOTE 2]: Select when the originals should be
stored in the hard disc of user’s PC via server.
The administrator has to make settings to select [REMOTE 1] or
[REMOTE 2] using the TopAccess.
For details, see the [Network Administrator’s Guide].
You can select 2 locations to store the data from [MFP LOCAL],
[REMOTE 1] and [REMOTE 2].
6
Select the file format.
- The SCAN folder is automatically created and the original data
will be stored into this folder. If you select “TIFF (SINGLE)”, an
additional folder with the name you entered in step 4 is further
created, and each page will be stored into this folder. You can
access the original data with the client PC via network, by opening
the FILE_SHARE folder in the equipment’s hard disc.
7
Press the [EDIT] button, set the original
type and the scanning conditions, and
then press the [ENTER] button.
HUD_PPC_EU.book Seite 151 Sonntag, 13. Februar 2005 2:57 14
152 7.SCANNING THE IMAGES
3.SCAN TO FILE (Cont.)
7
- Press the [Next] or [Prev] button to switch the screen and make
necessary settings.
8
Press the [ENTER] button.
9
Press the [SCAN!] button.
If the [SCAN TO E-FILING] or the [SCAN TO E-MAIL] button is
pressed to make the setting before pressing the [SCAN!] button, the
specified 2 jobs can be performed simultaneously.
10
“To continue, place document on glass.
And press Scan!” appears. If you want to
finish scanning, press the [JOB FINISH]
button.
- If you want to continue scanning, press the [SCAN!] button.
- When the original is set on the reversing automatic document
feeder (optional) to be scanned in the Continuous Feed mode,
this screen is not displayed.
HUD_PPC_EU.book Seite 152 Sonntag, 13. Februar 2005 2:57 14
153
7
- You can change the original size, type and scanning conditions by
pressing the [EDIT] button for the next scanning.
- If you want to cancel the storage of the scanned data, press the
[JOB CANCEL] button.
HUD_PPC_EU.book Seite 153 Sonntag, 13. Februar 2005 2:57 14
154 7.SCANNING THE IMAGES
7
4. SCAN TO E-MAIL
In this function, the scanned data can be sent to the specified E-mail address as an attached file.
After finishing the setting for the E-mail transmission, the settings for SCAN TO E-FILING or SCAN TO FILE
can be made and the data can be scanned simultaneously.
* To use SCAN TO E-MAIL, the configuration of the equipment needs to be set by the network
administrator.
To use SCAN TO E-MALE function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-
3010)’, or ‘optional Printer/Scanner kit (GM-2010)’ is required.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be scanned may be restricted. According to the
network environment, available data amount may be restricted.
The reversing automatic document feeder (optional) enables
consecutive scanning of more than one original.
2
Press the [SCAN] button on the control
panel to enter the scan menu.
3
Press the [SCAN TO E-MAIL] button.
HUD_PPC_EU.book Seite 154 Sonntag, 13. Februar 2005 2:57 14
155
7
4
Key in the “USER NAME” and
“PASSWORD” on the User Authentication
menu, and then press the [ENTER] button.
- If "User Authentication for Scan to Email" has not been set, skip
to step 5.
- When pressing the [USER NAME] and [PASSWORD] button, the
letter entry menu is displayed. Key in the user name and
password, and then press the [ENTER] button.
- Ask your administrator for details of setting "User Authentication
for Scan to Email".
5
Press the [E-MAIL TO] button and select
the address.
- Press the [E-MAIL ADDRESS] button when you want to enter the
address directly with the soft keyboard.
See steps 5 and 6 in "Direct Entry" Page 165 for details.
- In the address book, select the address you want to send to.
- Select the address you want to send to after pressing the
[GROUP] button.
See steps 5 and 6 in "Group Entry" Page 167 for details.
- Select the address you want to send to after pressing the
[KNOWN ID] button.
See steps 5 to 7 in "Searching by ID Number" Page 169 for
details.
- Select the address you want to send to after pressing the
[SEARCH ADDRESS] button.
See steps 5 to 9 in "Searching by Address" Page 170 for
details.
- After pressing the [SEARCH ADRESS] button, select the address
registered in the LDAP (Lightweight Directory Access Protocol)
server without using the address book in this equipment. To
enable this function, it is required to register the LDAP server
name via network beforehand. You can also set the default LDAP
server that you want to select. (Ask your network administrator for
details.)
See steps 3 to 5 in "Searching Address Using LDAP Server"
Page 172 for details.
- In the address book, you can select 2 or more addresses. Also,
you can combine the address book and group entry to select the
address you want to send to.
- See the [User Functions Guide] for entering and setting the
address.
- To return the SCAN TO E-MAIL menu from the address book,
press the [RETURN] button.
HUD_PPC_EU.book Seite 155 Sonntag, 13. Februar 2005 2:57 14
156 7.SCANNING THE IMAGES
4.SCAN TO E-MAIL (Cont.)
7
6
Press the [SUBJECT] button and enter the
subject of the E-mail.
- A subject can contain up to 128 letters.
"3.ENTERING LETTERS" Page 142
7
Press the [BODY] button and enter the
text body, etc.
- A body can contain up to 1,000 letters.
8
Press the [FILE NAME] button and name
the scanned data.
- A file name can contain up to 45 letters.
"3.ENTERING LETTERS" Page 142
9
Select the file format.
HUD_PPC_EU.book Seite 156 Sonntag, 13. Februar 2005 2:57 14
157
7
10
Press the [EDIT] button and set the
original size and type.
- After step 10 is finished, press the [NEXT] button.
11
Set the size of the attached data.
- Image data are divided into some small blocks to be sent.
FRAGMENT MESSAGE SIZE (KB): NONE, 64 KB, 128 KB, 256
KB, 512 KB, 1024 KB, 2048 KB
Press the [Next] or [Prev] button to switch the screen and make
necessary settings.
The volume of the high-resolution image data may be very large.
When sending E-mail, be careful not to exceed the mail server
capacity of both the transmitter and the receiver.
- If the software for E-mail is not able to divide the data properly,
resend it after setting smaller fragment message size.
- If the data size exceeds the specified size, it is divided into the
specified size to be sent.
12
Press the [FROM ADDRESS] button to
enter the sender's address, and then
press the [ENTER] button.
- FROM ADDRESS and FROM NAME displays the sender's
address and name set by the network administrator with
TopAccess when the equipment is installed.
- The contents of FROM ADDRESS and FROM NAME are sent to
the receiver as the information of the sender.
- Entering Letters "3.ENTERING LETTERS" Page 142
HUD_PPC_EU.book Seite 157 Sonntag, 13. Februar 2005 2:57 14
158 7.SCANNING THE IMAGES
4.SCAN TO E-MAIL (Cont.)
7
13
Press the [FROM NAME] button to enter
the sender's name, and then press the
[ENTER] button.
- Entering Letters "3.ENTERING LETTERS" Page 142
14
After all the settings are entered, press
the [ENTER] button.
15
Press the [SCAN!] button.
- If the [SCAN TO E-FILING] or the [SCAN TO FILE] button is
pressed to make the setting before pressing the [SCAN!] button,
the specified 2 jobs can be performed simultaneously.
HUD_PPC_EU.book Seite 158 Sonntag, 13. Februar 2005 2:57 14
159
8
8. INTERNET FAX
1. INTERNET FAX .................................................................................................................160
2. SENDING INTERNET FAX................................................................................................162
Setting the Transmission Conditions..................................................................................162
Specifying the Recipients...................................................................................................165
Advanced Function ............................................................................................................176
3. RECEIVING INTERNET FAX ............................................................................................179
HUD_PPC_EU.book Seite 159 Sonntag, 13. Februar 2005 2:57 14
160 8.INTERNET FAX
8
1. INTERNET FAX
Internet Fax function provides the ability to transmit a scanned original as an E-mail, with an attached TIFF-
S file. Since an Internet line is used instead of a phone line, the communication cost can be reduced.
In this function, an E-mail address is specified in place of a phone number to transmit a scanned original to
the Internet Fax equipment or the client computers.
When the Internet Fax is received, it is automatically output like regular Fax.
* The administrator needs to configure the network settings for Internet Fax to function. See the [Network
Administrator’s Guide].
To use Internet Fax function, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-3010)’,
or ‘optional Printer/Scanner kit (GM-2010)’ is required.
Precaution for Internet Transmission
Transmissions using the Internet Fax function are the same as E-mail transmissions.
Before you start to use the Internet Fax function, it is recommended that you read this section and
understand the precautions for Internet transmission.
- The Internet Fax sends a document to the E-mail server of Internet and it does not send via the PSTN*
alike regular facsimile transmissions.
- Internet transmission has low security. It is recommended that you use regular facsimile transmission
when confidential document is sent.
- It may take a considerable amount of time for the recipient to receive the document because of the line
traffic in the Internet.
- If the document being transmitted has a large amount of data, it may not be successfully sent due to the
configuration of the E-mail server.
* PSTN (Public Switched Telephone Network) is a global telephone system enables to communicate in
worldwide using copper wires to transmit analog data.
Internet Fax Transmission Overview
The following is an overview of the various transmissions that can be performed using the Internet Fax
function.
HUD_PPC_EU.book Seite 160 Sonntag, 13. Februar 2005 2:57 14
161
8
- Internet Fax to Internet Fax
The equipment can send a document to another Internet Fax equipment through the Internet or Intranet.
The document is sent as an E-mail.
- Internet Fax to/from Client Computers
The equipment can send a document as an E-mail to client computers through the Internet or Intranet.
The client computers can send an E-mail to the equipment as well.
- The client computer receives TIFF-S images when the equipment sends a document using the Internet
Fax function.
- The equipment can only print out text files and TIFF images. When sending E-mail from the client
computer to this equipment using the E-mail application, files other than text or TIFF images cannot be
sent. For Available Format, see "Receiving Modes" Page 179.
e-STUDIO350/450 e-STUDIO350/450
e-STUDIO350/450
HUD_PPC_EU.book Seite 161 Sonntag, 13. Februar 2005 2:57 14
162 8.INTERNET FAX
8
2. SENDING INTERNET FAX
Setting the Transmission Conditions
Set the resolution, the image quality mode, exposure, original size, subject and body of originals. Whenever
a transmission is completed, the condition will automatically return to the default setting. The following
describes the setting of each item.
-Resolution:
Set the resolution before you scan the original to be sent.
STANDARD, FINE, U-FINE
* For the Internet Fax, the original is sent in FINE though U-FINE is selected.
-Image Quality Mode:
Set the image quality mode before you scan the original to be sent.
TEXT, PHOTO/TEXT, TEXT
* The transmission time may be longer than usual in case the PHOTO/TEXT or the PHOTO mode is
selected.
-Exposure:
Set the image density according to the contrast of the original to be sent.
AUTO, MANUAL (11 steps)
* In the automatic exposure mode, the copier automatically judges the contrast of the original, and selects
the optimum contrast.
* In the manual exposure mode, you can adjust the contrast manually in 11 steps.
-Original Size:
Set the scanning size of the original to be sent.
AUTO: The size of the original is automatically determined before it is scanned.
SPECIFIED SIZE: The original is scanned in the specified size regardless of its actual size. Use this mode
when you are using non-standard size paper or you want to limit the area of the original to sent.
* When originals are placed in the reversing automatic document feeder, they are scanned in the AUTO
mode. You can specify the size only when the original is placed on the original glass.
* For the Internet Fax, all originals are sent in A4 size. The larger original than A4 size is reduced to A4
size, and the smaller original than A4 size is put with a margin.
-Subject/Body:
Subject and body can be added to the originals to be sent.
HUD_PPC_EU.book Seite 162 Sonntag, 13. Februar 2005 2:57 14
163
8
1
Press the [FAX] button on the control
panel.
2
Press the [ADDRESS] button to display
the address menu, and then press the
[OPTION] button.
HUD_PPC_EU.book Seite 163 Sonntag, 13. Februar 2005 2:57 14
164 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
3
After selecting each transmission
condition, press the [ENTER] button.
- Press the [Prev] or [Next] button to switch the menu.
- The buttons shaded in the menu on the right are the default
settings.
HUD_PPC_EU.book Seite 164 Sonntag, 13. Februar 2005 2:57 14
165
8
Specifying the Recipients
- Direct entry: You can enter the E-mail address directly with the letter entry menu to send the original.
- Address book entry: You can specify the other party that has been registered into the address book.
- Group entry: Originals are sent to the recipients that have been already specified as a group at a time.
- Multi-address transmission: The same original can be sent to 2 or more recipients in a single operation.
Direct Entry
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
5
Press the [ADDRESS] button to display
the address menu, and then press the [E-
MAIL ADDRESS] button.
6
Enter the E-mail address.
- Entering letters "3.ENTERING LETTERS" Page 142
7
Press the [START] button.
HUD_PPC_EU.book Seite 165 Sonntag, 13. Februar 2005 2:57 14
166 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
Address Book Entry
- It is necessary to previously register the address book.
See the [User Functions Guide] for registering the address book.
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
5
Press the [ADDRESS] to display the
address menu.
- 1 screen can show 8 destinations.
To view the destinations not displayed on the screen, press the
[Prev] or [Next] button to scroll through the screens.
- If a group list is displayed, press the [ADDRESS BOOK] button.
6
Press the [E-MAIL] button of destination.
- You can search for the recipient by ID number or Address.
- Searching by ID Number "Searching by ID Number" Page 169
Searching by Address "Searching by Address" Page 170
7
Press the [START] button.
HUD_PPC_EU.book Seite 166 Sonntag, 13. Februar 2005 2:57 14
167
8
Group Entry
- It is necessary to previously enter the recipients into the group.
See the [User Functions Guide] for creating groups.
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
5
Press the [ADDRESS] to display the
address menu, and then press the
[GROUP] button.
- 1 screen can show 8 destinations.
To view the destinations not displayed on the screen, press the
[Prev] or [Next] button to scroll through the screens.
HUD_PPC_EU.book Seite 167 Sonntag, 13. Februar 2005 2:57 14
168 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
6
Press the recipient group you want to
send to. To check the specified group
member, press the [CONTENTS] button.
- You can search for the recipient by ID number or group.
- Searching by ID Number "Searching by ID Number" Page 169
Searching by Group "Searching by Address" Page 170
7
Press the [START] button.
HUD_PPC_EU.book Seite 168 Sonntag, 13. Februar 2005 2:57 14
169
8
Searching by ID Number
When selecting the recipient entered in the address and the group, you can immediately search them by
the ID number on the screen.
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
5
Press the [ADDRESS] button to display
the address menu, and then press the
[KNOWN ID] button.
6
Key in the desired ID number using the
digital keys, and press the [ENTER]
button.
HUD_PPC_EU.book Seite 169 Sonntag, 13. Februar 2005 2:57 14
170 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
7
Press the [E-MAIL] button of destination.
- 1 screen can show 8 destinations.
To view the destinations not displayed on the screen, press the
[Prev] or [Next] button to scroll through the screens.
- To continue searching by the ID number, press the [KNOWN ID]
button.
- To continue searching by the address ("Searching by Address"
Page 170), press the [SEARCH ADDRESS] button.
8
Press the [START] button.
Searching by Address
When selecting the recipient entered in the address and group, pressing a letter button displays the
recipient whose names start with the letter on the screen, which makes it easy to choose the desired
recipient.
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
5
Press the [ADDRESS] button to display
the address menu, and then press the
[SEARCH ADDRESS] button.
HUD_PPC_EU.book Seite 170 Sonntag, 13. Februar 2005 2:57 14
171
8
6
Press the button of item that you want to
search.
7
Enter the letter or the number, and then
press the [ENTER] button.
- Entering Letters "3.ENTERING LETTERS" Page 142
8
Press the [SEARCH] button.
9
Press the [E-MAIL] button of destination,
and then press the [ENTER] button.
- 1 screen can show 8 destinations.
To view the destinations not displayed on the screen, press the
[Prev] or [Next] button to scroll through the screens.
- To continue searching by the address, press the [SEARCH
ADDRESS] button. (See Step 5.)
- To continue searching by the ID number ("Searching by ID
Number" Page 169), press the [KNOWN ID] button. (See Step
5 of “Searching by ID Number”)
10
Press the [START] button.
HUD_PPC_EU.book Seite 171 Sonntag, 13. Februar 2005 2:57 14
172 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
Searching Address Using LDAP Server
Without using the address book in this equipment, you can select the recipients registered in the address
book of the LDAP (Lightweight Directory Access Protocol) server via network. In this case, it is required to
register the directory search name using TopAccess via network beforehand. You can also set the default
LDAP server that you want to select. Ask your network administrator for details.
1
Press the [FAX] button on the control
panel.
- "Setting the Transmission Conditions" Page 162
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [ADDRESS] button to display
the address menu, and then press the
[SEARCH ADDRESS] button.
- If the LDAP server has already been set, go to step 6.
4
Press the [DIR SERVICE] button.
HUD_PPC_EU.book Seite 172 Sonntag, 13. Februar 2005 2:57 14
173
8
5
Press the directory search name that you
want to search, and then press the
[ENTER] button.
6
Search the recipient, and then send it.
- Perform steps 6 to 10 in "Searching by Address" Page 170.
* Searching using the LDAP server is available for Fax number
and E-mail.
Multi-address Transmission
The multi-address transmission function allows you to send the same original to 2 or more recipients in a
single operation, which can be done by combining direct, address book and group entry.
The following show the number of destinations that can be entered according to how the recipient is
specified:
- By direct entry only: 400 destinations
- By address book entry only: 400 destinations
- By group entry only: 200 groups (400 destinations per 1 group)
- By combining direct, address book and group entry: 400 destinations
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
4
Set the advanced function as required.
- "Advanced Function" Page 176
HUD_PPC_EU.book Seite 173 Sonntag, 13. Februar 2005 2:57 14
174 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
5
Specify the recipient.
- To continuously enter E-mail address after having specified them
by means of entering directly, press the [MULTI] button, and then
enter the next address. You do not need to press the [MULTI]
button for the address book or the group entry.
- The selected destinations can be confirmed by selecting the
[DESTINATION] button. "Confirming the Destinations" Page
174
- To cancel the other party’s address during the direct entry, press
the [CLEAR] button on the control panel.
- To cancel the other party specified by the address or the group,
press the highlighted button again. To cancel all specified
recipient, press the [ALL CLEAR] button.
- To cancel the other party specified by the direct entry, press the
[DESTINATION] button to enter the destination menu, and then
cancel it. "Confirming the Destinations" Page 174
6
Press the [START] button.
Confirming the Destinations
After specifying of the multiple destinations by such as Multi-address Transmitting, you can confirm these
addresses in the list by pressing the [DESTINATION] button. Also, you can delete the addresses by
pressing the [DELETE] button.
1
Press the [DESTINATION] button.
- 1 screen can show 8 destinations.
- To view destinations which are not displayed on the screen, press
the [Prev] or [Next] button to scroll through the screens.
HUD_PPC_EU.book Seite 174 Sonntag, 13. Februar 2005 2:57 14
175
8
2
Select the destination that you want to
delete, and then press the [DELETE]
button.
HUD_PPC_EU.book Seite 175 Sonntag, 13. Februar 2005 2:57 14
176 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
Advanced Function
The following advanced function can be used.
- 2-sided original TX: 2-sided originals can be sent using the reversing automatic document feeder.
- Priority TX: You can send originals prior to the reserved transmissions.
Sending 2-sided Originals
You can scan and send 2-sided originals using the reversing automatic document feeder (optional).
Whenever a transmission is completed, the condition will automatically return to the default setting.
To send the 2-sided originals, the reversing automatic document feeder (optional) needs to be installed in
this equipment.
- Setting originals when sending LT/A4 2-sided originals
To set the originals on the reversing automatic document feeder (optional), change the direction of
original feeding depending on the bound position.
1: 2-sided originals bound with open to left
2: 2-sided originals bound with open to top
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
1 2
HUD_PPC_EU.book Seite 176 Sonntag, 13. Februar 2005 2:57 14
177
8
4
Press the [ADVANCED] button to display
the advanced menu, and then press the
[2-SIDED SCAN] button.
5
Select the original type either the [BOOK]
or [TABLET] button, and then press the
[ENTER] button.
6
Specify the recipient.
- "Specifying the Recipients" Page 165
7
Press the [START] button.
Priority Transmission
Priority TX allows you to execute a transmission prior to the other reserved transmissions.
- You can use 'Direct Entry' and 'Address Dialing' to specify the recipients.
- Priority TX can be performed only for 1 transmission.
1
Press the [FAX] button on the control
panel.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [OPTION] button and set the
transmission conditions.
- "Setting the Transmission Conditions" Page 162
HUD_PPC_EU.book Seite 177 Sonntag, 13. Februar 2005 2:57 14
178 8.INTERNET FAX
2.SENDING INTERNET FAX (Cont.)
8
4
Press the [ADVANCED] button to display
the advanced menu, and then press the
[PRIORITY RESERVE] button.
5
Press the [ENTER] button.
6
Specify the recipient.
- "Specifying the Recipients" Page 165
7
Press the [START] button.
HUD_PPC_EU.book Seite 178 Sonntag, 13. Februar 2005 2:57 14
179
8
3. RECEIVING INTERNET FAX
Receiving Modes
The methods to receive an Internet Fax vary according to the type of protocols used for receiving an E-mail.
When POP3* is selected for the Receive Mode:
- The equipment accesses the E-mail server at specified intervals to check whether any E-mail has been
delivered. If an E-mail has been delivered, the equipment will automatically retrieve and print out the E-
mail.
- When the [CHECK E-MAIL] button is pressed, the equipment manually accesses the E-mail server to
check whether any E-mail has been delivered. If an E-mail has been delivered, the equipment receives
and prints out the E-mail.
* POP (Post Office Protocol) is a protocol to retrieve the E-mail message from a mail server. Most E-mail
applications use POP. POP3 is a newer version of the POP protocol.
When SMTP* is selected for Receive Mode
- When SMTP is selected for Receive Mode, the [CHECK E-MAIL] button is disabled. As soon as an E-
mail is received by the E-mail server via the internet, the mail server will transfer the E-mail to this
equipment. For more details, see “Receiving from SMTP server”.
* SMTP (Simple Mail Transfer Protocol) is a server protocol to transfer the E-mail message between
servers. Most E-mail system uses SMTP to transfer the E-mail messages over the Internet.
For how to set the receiving mode and how to print the received Internet Fax, see the [Network
Administrator's Guide]
To set RX printing of the received Internet Fax, see the [User Function Guide].
Available Format:
The TIFF-FX images, TIFF images scanned by the scanner and the text data can be printed. In addition,
the resolution of the TIFF-FX image must be 8 x 3.85, 8 x 7.7 or 8 x 15.4 (dot/mm). The resolution of the
TIFF images scanned by the scanner must be 200 x 100, 200 x 200, 200 x 400, 400 x 400 or 600 x 600
(dpi). If the received E-mail contains files that are not the ones described above, an error message will be
displayed in the receive log.
To avoid such a case, you can print the report when an error occurs for E-mail printing and also forwarding
this E-mail to another E-mail address can be set.
If you want to print the report when an error occurs for E-mail printing, set up “Enable Print E-mail Error”.
If you want to forward the E-mail to another E-mail address when an error occurs, set up “Enable E-mail
Error Forward” and “E-mail Error Transfer Address”.
See the “Setting up the E-mail Print” in the [Network Administrator’s Guide].
HUD_PPC_EU.book Seite 179 Sonntag, 13. Februar 2005 2:57 14
180 8.INTERNET FAX
3.RECEIVING INTERNET FAX (Cont.)
8
Receiving from POP3 Server
To automatically receive the Internet Fax from the E-mail server, set up the “POP3 Time”.
Checking whether any E-mail has been delivered at specified intervals will be performed automatically.
(Default setting: every 5 minutes)
For setting the “POP3 Time”, see the [Network Administrator's Guide].
1
Press the [USER FUNCTIONS] button on
the control panel.
2
Press the [USER] button, and then press
the [CHECK E-MAIL].
- Checking whether any E-mail has been delivered starts.
3
Checking completes.
- If the Internet Fax is received, “RECEIVING E-mail” appears on
the screen upper right. Next, “NEW E-mail RECEIVED” appears
for 2 seconds. Then, printing the Internet Fax starts.
- If no Internet Fax is received, “CURRENTLY NO E-mail” appears
on the screen upper right for 2 seconds.
Receiving from SMTP Server
Once an E-mail is sent to this equipment or an E-mail is delivered through the Internet, this equipment will
automatically retrieve E-mail from the SMTP server using the SMTP transmission.
When the Receive Mode is set to SMTP, the sub-domain for this equipment must be assigned at the SMTP
server to receive E-mail or enable the Offramp Gateway transmission. In this case, this equipment works
as one of the E-mail servers.
When the SMTP server receives an E-mail intended for the sub-domain of this equipment, the SMTP server
will transfer the E-mail to this equipment using the SMTP transmission. If an E-mail is sent to the E-mail
address of this Internet Fax equipment, it will print the E-mail out.
Please see the OFFRAMP GATEWAY SETUP (See the [Network Administrator’s Guide]) for further details.
When the Receive Mode is set to SMTP the equipment cannot retrieve an E-mail from the mail server
manually.
HUD_PPC_EU.book Seite 180 Sonntag, 13. Februar 2005 2:57 14
181
9
9. JOB STATUS
1. JOB STATUS .....................................................................................................................182
2. PRINT JOB LIST................................................................................................................183
3. PROOF PRINT JOB ..........................................................................................................186
4. PRIVATE PRINT JOB ........................................................................................................188
5. WHEN USING THE DEPARTMENT CODES ....................................................................190
6. CONFIRMING THE STATUS OF FAX/INTERNET FAX JOB ............................................192
7. CONFIRMING THE STATUS OF SCAN............................................................................193
8. LOG LIST...........................................................................................................................194
9. ADDRESS REGISTRATION FROM LOG LISTS...............................................................197
10.PRINTING SEND/RECEIVE LOG LIST OF FAX ...............................................................199
11.STATUS .............................................................................................................................200
12.ERROR CODE...................................................................................................................202
HUD_PPC_EU.book Seite 181 Sonntag, 13. Februar 2005 2:57 14
182 9.JOB STATUS
9
1. JOB STATUS
[JOB STATUS] enables:
- To show the list of printing, Internet Fax and scanning jobs in the waiting status
- To show the print, transmission, reception, and scan logs
- To perform the execution, pause, deletion and movement of the waiting jobs
- To print the send and receive logs
4 jobs are listed on each screen (page). The jobs for 250 pages (1,000 jobs) are available to display. Press
the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page.
- Jobs concerning Fax are available when ‘optional Fax board (GD-1150)’ is installed.
- Jobs concerning scan, Internet Fax, or E-mail are available when ‘optional Printer kit (GM-1010) and
optional Scanner upgrade kit (GM-3010)’, or ‘optional Printer/Scanner kit (GM-2010)’ is installed.
- Print jobs received from the client PC via network are available when ‘optional Printer kit (GM-1010)’, or
‘optional Printer/Scanner kit (GM-2010)’ is installed.
- Items of list
User Name: Name of registered user
Date, Time: Date and time the job was received
Paper: Paper size to be printed
Pages: Number of pages to be printed
Sets: Number of sets to be printed
Status: Status of jobs or specified time for Delayed TX Reservation
- Buttons
The display of buttons (B) are changed by selecting a job from the list. Buttons (A) select the type of print
jobs to view.
B
A
HUD_PPC_EU.book Seite 182 Sonntag, 13. Februar 2005 2:57 14
183
9
2. PRINT JOB LIST
Print Job displays the status of copy jobs and print jobs transmitted between the equipment and network
controller, and perform the deletion, pause, movement and print of the jobs.
Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous
page.
Deleting a Job
1
Press the [JOB STATUS] button on the
control panel to display the JOB STATUS
screen.
- Displayed screen is the print job list screen.
2
Press the job on the list you want to
delete.
3
Press the [DELETE] button.
HUD_PPC_EU.book Seite 183 Sonntag, 13. Februar 2005 2:57 14
184 9.JOB STATUS
2.PRINT JOB LIST (Cont.)
9
4
“Delete OK?” appears. Press the
[DELETE] button to delete the job.
Pause/Resume
1
Press the user name on the list you want
to interrupt.
2
Press the [PAUSE] button.
3
To resume the job, press the [RELEASE]
button.
HUD_PPC_EU.book Seite 184 Sonntag, 13. Februar 2005 2:57 14
185
9
Moving a Print Job
1
Press the user name on the list you want
to move.
2
Press the [MOVE] button.
3
Specify the position of the order.
-(Ex.)
Press the 1st user name to move the target job to the 2nd.
HUD_PPC_EU.book Seite 185 Sonntag, 13. Februar 2005 2:57 14
186 9.JOB STATUS
9
3. PROOF PRINT JOB
This function performs the proof print when the [PROOF] button is previously specified with the application.
The print job specified for proof print is listed. 1 set is printed as a proof print before the specified number
of sets are printed. After it completes, remaining print job is performed as the normal print job. In addition,
before performing as the normal print job, changing the number of sets and deleting a job are available.
* For the Proof print, see the [Print Guide].
Performing the Proof Print
1
Press the [PROOF] button.
2
Proof print job list is displayed. Press the
user name on the list you want to print.
- If the relevant job is not displayed, press the [Next] or [Prev]
button to switch the screen.
3
Press the [RELEASE] button. The job is
moved to the normal print job to print it.
HUD_PPC_EU.book Seite 186 Sonntag, 13. Februar 2005 2:57 14
187
9
After confirming the printed paper of the proof print, press the [EDIT]
button and key in the desired number to change the number of sets.
And then press the [RELEASE] button to continue the normal print
job.
Deleting a Job
1
Press the [PROOF] button.
2
Proof print job list is displayed. Press the
user name on the list which you want to
delete.
3
Press the [DELETE] button.
4
“Delete OK?” appears. Press the
[DELETE] button to delete the job.
HUD_PPC_EU.book Seite 187 Sonntag, 13. Februar 2005 2:57 14
188 9.JOB STATUS
9
4. PRIVATE PRINT JOB
Private print enables to print the desired documents by entering the password which has been set on the
application.
* For the Private print, see the [Print Guide].
Private Print
1
Press the [PRIVATE] button to display the
private print job list.
2
Press the user name on the list you want
to start with.
- If the relevant job is not displayed, press the [Next] or [Prev]
button to switch the screen.
3
Press the [RELEASE] button.
4
Key in the password.
5
Press the [ENTER] button.
- The private print job is moved to the print job list to start printing.
HUD_PPC_EU.book Seite 188 Sonntag, 13. Februar 2005 2:57 14
189
9
Deleting a Private Print
1
Press the [PRIVATE] button to display the
private print job list.
2
Press the user name on the list you want
to delete.
3
Press the [DELETE] button.
4
Key in the password, and then press the
[ENTER] button.
5
“Delete OK?” appears. Press the
[DELETE] button to delete the job.
HUD_PPC_EU.book Seite 189 Sonntag, 13. Februar 2005 2:57 14
190 9.JOB STATUS
9
5. WHEN USING THE DEPARTMENT CODES
Jobs sent to the equipment without a Department Code or not a registered Department Code will appear in
the Invalid Queue of Job status.
To Restore the Invalid Code (print error) to the Normal Print
1
Press the [INVALID] button to display the
list.
2
Press the user name on the list you want
to print.
3
Press the [RELEASE] button.
4
The department code entry screen is
displayed. Key in the correct department
code.
5
Press the [ENTER] button.
HUD_PPC_EU.book Seite 190 Sonntag, 13. Februar 2005 2:57 14
191
9
Deleting a Job from the List
1
Press the [INVALID] button to display the
list.
2
Press the user name on the list you want
to delete.
3
Press the [DELETE] button.
4
“Delete OK?” appears. Press the
[DELETE] button to delete the job.
HUD_PPC_EU.book Seite 191 Sonntag, 13. Februar 2005 2:57 14
192 9.JOB STATUS
9
6.
CONFIRMING THE STATUS OF FAX/INTERNET FAX JOB
Fax (optional)/Internet Fax (optional) JOB displays its status and allows the deletion or releasing of a job.
4 jobs are listed on each screen (page). The jobs for 250 pages (1,000 jobs) are available to display. Press
the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page.
* For the Fax function, see the [Network Fax Guide].
- Items of list
File No.: Number of accepted job order
To: Recipient
Date, Time: Date and time at the time of registration
Pages: Number of pages to be sent
Status: Status of jobs
- Buttons
[Delete]: The job is deleted when this button is pressed after transmission job is selected.
[RESERVATION LIST]: To print the pending job list (including Delayed TX Reservation job), press this
button.
[RELEASE]: The button becomes active when the job for Delayed TX Reservation (Fax only) is selected.
Pressing this key will send the Delayed TX.
To cancel the Delayed TX Reservation, press this button.
See the [Operator’s Manual for Facsimile Function] for Delayed TX Reservation.
HUD_PPC_EU.book Seite 192 Sonntag, 13. Februar 2005 2:57 14
193
9
7. CONFIRMING THE STATUS OF SCAN
SCAN JOB (optional) displays its status and enables to delete the job. 4 jobs are listed on each screen. The
jobs for 250 pages (1,000 jobs) are available to display. Press the [Next] button to display the 5th job or
later, and press the [Prev] button to display the previous page.
* For the SCAN function, see the [SCANNING THE IMAGES]. "1.SCAN SETTING IN THE TOUCH
PANEL" Page 144
- Items of list
To: The name of the file created or the e-mail address of the recipient
Agent: Function used for the scan job
Date, Time: Date and time of the scan job
Pages: Number of pages scanned or sent via e-mail
Status: Status of jobs
- Buttons
[Delete]: The button becomes active when the deletable job is selected. When this button is pressed, the
job is deleted.
HUD_PPC_EU.book Seite 193 Sonntag, 13. Februar 2005 2:57 14
194 9.JOB STATUS
9
8. LOG LIST
LOG allows you to list the jobs that have finished being copied, printed, sent/received Fax, sent/received
Internet Fax, sent/received E-mail and scanned to confirm the results. You can also register the Fax number
and E-mail address from the send/receive Fax, sent/received Internet Fax and scan (*1) log to the address
book. (Fax, Internet Fax, E-mail and scan functions are optional.)
*1 E-mail address used in the E-mail transmission
Print Log
When pressing the [PRINT] button on the log menu, the copying or printing status is displayed.
- Items of list
User Name: Sender’s name
Date, Time: Date and time at the time of copying or printing
Paper: Paper size
Pages: Number of pages
Sets: Number of sets
- Buttons
[Return]: To return to the log menu, press this button.
HUD_PPC_EU.book Seite 194 Sonntag, 13. Februar 2005 2:57 14
195
9
Send/Receive Log
When pressing the [SEND] button on the log menu, the sending status of Fax (optional) or Internet Fax
(optional) is displayed.
When pressing the [RECEIVE] button on the log menu, the receiving status of Fax (optional), Internet Fax
(optional) or E-mail (optional) is displayed.
- Items of list
File No.: Number of accepted job order
To: Recipient’s Fax number or recipient’s E-mail address
From: Sender’s Fax number or sender’s E-mail address
Date, Time: Date and time at the time of sending or receiving Fax or Internet Fax, or receiving E-mail
Pages: Number of pages of sent or received Fax or Internet Fax, or receiving E-mail
Status: Status of job displayed with ‘OK’ or ‘Error code’ "12.ERROR CODE" Page 202
- Buttons
[JOURNAL]: To print the sending/receiving status, press this button. See "10.PRINTING SEND/RECEIVE
LOG LIST OF FAX" Page 199 for details.
[ENTRY]: To register the Fax number or E-mail address in the sending/receiving status to the address
book, press this button. See "9.ADDRESS REGISTRATION FROM LOG LISTS" Page 197 for details.
[RETURN]: To return to the log menu, press this button.
HUD_PPC_EU.book Seite 195 Sonntag, 13. Februar 2005 2:57 14
196 9.JOB STATUS
8.LOG LIST (Cont.)
9
Scan Log
When pressing the [SCAN] button on the log menu, the scanning status of the following items is displayed.
- Storing status in e-Filing by copying
- Storing status in Share folder (SAVE AS FILE) by copying (optional)
- Storing status in e-Filing or Share folder (SCAN TO FILE) by scanning (optional)
- Sending status of E-mail (SCAN TO E-MAIL) by scanning (optional)
- Items of list
To: The storing location of the scanned data or E-mail address of the recipient
Agent: Scanned job in the scan menu
Date, Time: Date and time at the time of scanning
Pages: Number of pages scanned or sent E-mail
Status: Status of job displayed with ‘OK’ or ‘Error code’ "12.ERROR CODE" Page 202
- Buttons
[ENTRY]: To register the E-mail address in the scanning status to the address book, press this button.
See "9.ADDRESS REGISTRATION FROM LOG LISTS" Page 197 for details.
[RETURN]: To return to the log menu, press this button.
HUD_PPC_EU.book Seite 196 Sonntag, 13. Februar 2005 2:57 14
197
9
9. ADDRESS REGISTRATION FROM LOG LISTS
You can register the recipient (or sender) in the address book from the SEND /RECEIVE LOG list or the
SCAN LOG list by selecting the recipient (or sender) and pressing the [ENTRY] button.
* For the address book, see the [User Functions Guide].
1
Press the [LOG] button and then press the
[SEND] (or [RECEIVE] or [SCAN]) button.
2
SEND LOG list (or RECEIVE LOG list or
SCAN LOG list) is displayed.
3
Select the recipient (or sender or
recipient) you want to register in the
address book.
HUD_PPC_EU.book Seite 197 Sonntag, 13. Februar 2005 2:57 14
198 9.JOB STATUS
9.ADDRESS REGISTRATION FROM LOG LISTS (Cont.)
9
4
Press the [ENTRY] button.
5
ADDRESS ENTRY screen is displayed.
Press each button on the touch panel to
enter following contact information
- [FIRST NAME] - Enter the first name of the contact.
- [LAST NAME] - Enter the last name of the contact. This name will
appear in the address book list on the touch panel.
- [FAX NO.] - ENter the fax number of the contact.
- [2ND FAX] - Enter the second fax number of the contact.
- [E-MAIL] - Enter the E-mail address of the contact.
- [CORP.] - Enter the company name of the contact.
- [DEPT.] - Enter the department name of the contact.
- [KEYWORD] - Enter the keyword of the contact. This keyword
can be used to search for this contact.
You must at least enter either the [FIRST NAME] or [LAST NAME]
button, and either the [FAX NO.] or [E-MAIL] button to register the
contact.
When you press each button, the input screen is displayed. Enter
the value using the keyboard and digital keys and press the
[ENTER] button to set the entry.
- Entering letters "3.ENTERING LETTERS" Page 142
6
Press the [ENTER] button.
HUD_PPC_EU.book Seite 198 Sonntag, 13. Februar 2005 2:57 14
199
9
10. PRINTING SEND/RECEIVE LOG LIST OF FAX
Up to 120 logs (3 pages) and 1 selected SEND (or RECEIVE) LOG are available to print in the SEND/
RECEIVE LOG list of Fax.
* Either 40 logs (1 page) or 120 logs (3 pages) can be set to print the log list. See the [User Functions
Guide] for details.
1
Press the [LOG] button, and then press
the [SEND] (or [RECEIVE]) button.
2
Press the [JOURNAL] button to print the
SEND/RECEIVE LOG.
HUD_PPC_EU.book Seite 199 Sonntag, 13. Februar 2005 2:57 14
200 9.JOB STATUS
9
11. STATUS
STATUS displays the drawer's size of the equipment and highlights the active drawer during printing. When
pressing the [STATUS] during stopping of the print job due to an error, the drawer's size and the active
drawer can be changed in case of paper shortage and no applicable drawer.
Releasing the Print Error
When the drawer for the specified size paper is not prepared, the print job error occurs and the [JOB
STATUS] button blinks. To release the error, follow the procedure below.
1
Press the blinking [JOB STATUS] button.
2
Select the drawer to be changed.
- To select the drawer, press the drawer, or the or button
on the screen.
3
Change the paper size of the drawer to the
specified size.
- Changing the paper size of the drawer "Changing the Paper Size
of the Drawer/Setting the Drawer for Special Uses" Page 38
HUD_PPC_EU.book Seite 200 Sonntag, 13. Februar 2005 2:57 14
201
9
4
Press the paper size button you set by
pressing the paper size button on the
screen.
5
Press the [START] button.
HUD_PPC_EU.book Seite 201 Sonntag, 13. Februar 2005 2:57 14
202 9.JOB STATUS
9
12. ERROR CODE
If an error occurs while using the optional Fax, optional Internet Fax, or optional scan, the error code is
displayed in the status of each log. Take an appropriate action with reference to the following.
Fax/Internet Fax
Error Code Cause & Message Corrective Action
Fax
0011 Paper jam Clear the jammed printing paper.
0012 Original jam Clear the jammed original.
0013 Door open Firmly close the open door.
0020 Power interruption Check the power interruption report.
0030 Reset (Transmission is cancelled.)
0033 Polling Error Check polling options setup (Security Code,
etc.), and check if the polling document
exists.
0042 Memory full Make sure that there is sufficient memory
before making the call again.
0050 Line busy Retry communications.
0053 Security Mismatch in Relay or Mail Box
transmission
Confirm the remote party’s Security Code,
system password, and your setup.
00B0-00B5
00C0-00C4
00D0-00D2
Signal Error or Line Condition Error Retry communications. Frequent failures may
indicate a phone line problem. If possible,
move the unit to another line and try your
communications again.
00E8 HDD error Retry communications. If the error still occurs,
contact your service representative.
00F0 Software failure Retry communications. If the error still occurs,
contact your service representative.
00F1 Hardware noise Retry communications. If the error still occurs,
contact your service representative.
Internet Fax
1C10 System access abnormality Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C11 Insufficient memory When there are running jobs, perform the job
in error again after the completion of the
running jobs. If the error still occurs, turn the
power OFF and then back ON, and perform
the job again.
1C12 Message reception error Turn the power OFF and then back ON.
Perform the job in error again.
HUD_PPC_EU.book Seite 202 Sonntag, 13. Februar 2005 2:57 14
203
9
1C13 Message transmission error Turn the power OFF and then back ON.
Perform the job in error again.
1C14 Invalid parameter When a template is used, form the template
again. If the error still occurs, turn the power
OFF and then back ON, and perform the job
again.
1C15 Exceeding file capacity Ask your administrator to change the
“Fragment Page Size” setting for the Internet
Fax setting, or reduce the number of pages
and perform the job again.
1C20 System management module access
abnormality
Turn the power OFF and then back ON.
Perform the job in error again. If the recovery
is still not completed, contact your service
representative.
1C21-1C22 Job control module access abnormality Turn the power OFF and then back ON.
Perform the job in error again. If the recovery
is still not completed, contact your service
representative.
1C30 Directory creation failure Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
1C31 File creation failure Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
1C32 File deletion failure Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C33 File access failure Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
1C40 Image conversion abnormality Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C60 HDD full failure during processing Reduce the number of pages of the job in
error and perform the job again. Check if the
server or local disc has a sufficient space in
disc capacity.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 203 Sonntag, 13. Februar 2005 2:57 14
204 9.JOB STATUS
12.ERROR CODE (Cont.)
9
1C61 Address Book reading failure Turn the power OFF and then back ON.
Perform the job in error again.
Reset the data in the Address Book and
perform the job again.
If the error still occurs, contact your service
representative.
1C62 Memory acquiring failure Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C63 Terminal IP address unset Ask your administrator to set the IP address
of the equipment.
1C64 Terminal mail address unset Ask your administrator to set the E-mail
address of the equipment.
1C65 SMTP address unset Ask your administrator to set the SMTP
server address.
1C66 Server time time-out error Check if the SMTP server is operating
properly.
1C67 NIC time time-out error Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C68 NIC access error Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C69 SMTP server connection error Ask your administrator to set the login name
or password of SMTP server and perform the
job again. Check if the SMTP server is
operating properly.
1C6A HOST NAME error Ask your administrator to check if there is an
illegal character in the device name. Delete
the illegal character and reset the appropriate
device name.
1C6B Terminal mail address error Ask your administrator to check if there is an
illegal character in the E-mail address of the
equipment. Delete the illegal character and
reset the appropriate E-mail address, then
perform the job again.
1C6C Destination mail address error Check if there is an illegal character in the
Destination E-mail address. Delete the illegal
character and reset the appropriate
Destination E-mail address, then perform the
job again.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 204 Sonntag, 13. Februar 2005 2:57 14
205
9
1C6D System error Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C70 SMTP client OFF Ask your administrator to enable the SMTP
Client and perform the job again.
1C80 Internet Fax transmission failure when
processing E-mail job received
Confirm the “Received Internet Fax Forward”
settings.
1C81 Onramp Gateway transmission failure Confirm the mail box settings.
1C82 Internet Fax transmission failure when
processing Fax job received
Confirm the “Received Fax Forward” setting.
1CC1 Power failure Check if the power cable is connected
properly and it is inserted securely. Check if
the power voltage is unstable.
3A10-3A12 MIME format error Ask the sender to resend the E-mail in the
MIME1.0 format.
3A20-22 E-mail process error Ask the sender to resend the E-mail.
3A30 Partial E-mail timeout error Ask the sender to resend the E-mail, or
change the Partial Wait time setting.
3A40 Invalid partial E-mail received Ask the sender to resend the partial E-mail in
the RFC2046 format.
3A50-3A52 HDD full error Ask the sender to resend the E-mail by
separating it to several E-mails. If this error
occurs because the paper empty occurs and
too much waiting jobs are stored in the hard
disc, add the paper to activate other jobs.
3A60-3A62 HDD full alert Ask the sender to resend the E-mail by
separating it to several E-mails. If this error
occurs because the paper empty occurs and
too much waiting jobs are stored in the hard
disc, add the paper to activate other jobs.
3A70 Interrupt partial E-mail reception Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
3A80-3A82 Partial E-mail disabled Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
3B10-3B12 E-mail format error Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 205 Sonntag, 13. Februar 2005 2:57 14
206 9.JOB STATUS
12.ERROR CODE (Cont.)
9
3B20-3B22 Context-Type error Ask the sender to resend the E-mail with
attached files that are the TIFF format.
3B30-3B32 Invalid character set Ask the sender to resend the E-mail in the
ISO-8559-1/2 format.
3B40-3B42 E-mail decode error Ask the sender to resend the E-mail.
3C10-3C13 TIFF analysis error Ask the sender to resend the E-mail with
attached files that are the TIFF format.
3C20-3C22 TIFF compression error Ask the sender to resend the E-mail with
attached TIFF files in the MH, MR, MMR, or
JBIG compression.
3C30-3C32 TIFF resolution error Ask the sender to resend the E-mail with
attached TIFF files whose resolution is either
200 x 100, 200 x 200, 200 x 400, 300 x 300,
or 400 x 400 dpi.
3C40-3C42 TIFF paper size error Ask the sender to resend the E-mail with
attached TIFF files that can be printed on the
paper available for this equipment.
3C50-3C52 Offramp transmission error Ask the sender to specify the correct fax
numbers and resend the E-mail.
3C60-3C62 Offramp security error Confirm the fax numbers that are specified in
the received offramp gateway job and ask the
sender to resend the E-mail with correct fax
numbers.
3C70 Power failure Confirm the job is recovered or not. If not, ask
the sender to resend the E-mail.
3D10 Destination address error Ask your administrator whether the DNS and
mail server settings are correctly set. If they
are correctly set, ask the sender to confirm
the destination address is correct.
3D20 Exceeding maximum offramp
destinations
Ask the sender to specify up to 40
destinations for one offramp gateway job.
The equipment cannot perform the offramp
gateway transmission for more than 40
destinations.
3D30 Fax unit is not installed Make sure the Fax unit is installed, or
connected correctly.
3E10 POP3 server communication error Ask your administrator that the POP3 server
address is correctly set, or the POP3 server
works properly.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 206 Sonntag, 13. Februar 2005 2:57 14
207
9
Scan Job
3E20 POP3 server communication timeout Ask your administrator that the POP3 server
works properly and the LAN cable is
connected to the server.
3E30 POP3 login error Ask your administrator that the POP3 user
name and password is set correctly.
3F00, 3F10,
3F20, 3F30,
3F40
File I/O error Ask the sender to resend the E-mail. If the
error still occurs, contact your service
representative.
Error Code Cause & Message Corrective Action
SCAN TO E-MAIL
2C10, 2C12,
2C13,
2C20-2C22
Illegal Job status A system error has occurred during sending
an E-mail. Retry it. If the error still occurs,
contact your service representative.
2C11, 2C62 Not enough memory Make sure there is enough memory to send
the scan job.
2C14 Invalid parameter specified Make sure you specify the settings correctly
and try again.
2C15 Message size exceeded limit or
maximum size
You are sending too many documents at a
time. Send your documents separately.
2C30 Failed to create directory Make sure that the access privilege to the
storage directory is writable and the server or
local disc has a sufficient space. Then retry
the scan.
2C31, 2C33 Failed to create file Make sure that the access privilege to the
storage directory is writable and the server or
local disc has a sufficient space. Then retry
the scan.
2C32 Failed to delete file Turn the power OFF and then back ON. Retry
the scan.
2C40 Failed to convert image file format Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2C61 Failed to read AddressBook Turn the power OFF and then back ON. Retry
the job in error. Reset the data in the Address
Book and retry it. If the error still occurs,
contact your service representative.
2C63, 2C64 Invalid Domain Address Ask your administrator to set the IP address.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 207 Sonntag, 13. Februar 2005 2:57 14
208 9.JOB STATUS
12.ERROR CODE (Cont.)
9
2C65, 2C66,
2C69
Failed to connect to SMTP server Make sure the SMTP server is correctly
working, or the SMTP server address has
been set correctly. Then retry the scan.
2C67, 2C68
2C6A
Failed to send E-Mail message Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2C6B Invalid address specified in From: field Make sure that there is an illegal character in
the Terminal mail address. Delete the illegal
character and reset the appropriate Terminal
mail address, then retry it.
2C6C Invalid address specified in To: field Make sure that there is an illegal character in
the Destination mail address. Delete the
illegal character and reset the appropriate
Destination mail address, then retry it.
2C6D NIC system error Contact your dealer for support.
2C70 SMTP service is not available Ask your administrator whether the SMTP
service is enabled.
2C80 Failed to process received E-mail job Ask your administrator to confirm whether the
Received Internet Fax Forward is set.
2C81 Failed to process received Fax job Ask your administrator to confirm whether the
Received Fax Forward is set.
2CC0 Job canceled (Job was canceled.)
2CC1 Power failure occurred Make sure that the power cable is connected
properly and it is inserted securely. Resend
the job.
Save as file
2D10, 2D12,
2D13,
2D20-2D22
Illegal Job status Turn the power OFF and then back ON. Retry
sending. If the error still occurs, contact your
service representative.
2D11 Not enough memory Make sure there are enough memory to save
the scan job.
2D14, 2D61 Invalid parameter specified Make sure you specify the settings correctly
and try again.
2D15, 2D65 There are too many documents in the
folder. Failed in creating new document.
Delete the data in the local shared folder in the
equipment and retry the scan.
2D30 Failed to create directory Make sure that the access privilege to the
storage directory is writable and the server or
local disc has a sufficient space. Then retry
the scan.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 208 Sonntag, 13. Februar 2005 2:57 14
209
9
2D31, 2D33 Failed to create file Make sure that the access privilege to the
storage directory is writable and the server or
local disc has a sufficient space in disc
capacity. Then retry the scan.
2D32 Failed to delete file Turn the power OFF and then back ON. Retry
the scan.
2D40 Failed to convert image file format Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2D60 Failed to copy file Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2D62 Failed to connect to network destination.
Check destination path.
Make sure that the network path is correct,
and retry the scan. If the error still occurs, ask
your administrator to confirm whether the IP
address or path of the server is correct. Also
make sure that the server is operating
properly.
2D63 Specified network path is invalid. Check
destination path.
Make sure you specify correct network folder
and retry the scan.
2D64 Logon to file server failed. Check
username and password.
Make sure you specify correct user name and
password to logon the file server and retry the
scan.
2D66 Failed to process your job. Insufficient
disc space.
Delete the data in the local shared folder in the
equipment and retry the scan.
2D67 FTP service is not available. Ask your administrator whether the FTP
service is configured correctly.
2D68 File Sharing service is not available. Ask your administrator whether the SMB
protocol is enabled.
2DC0 Job canceled Job was canceled.
2DC1 Power failure occurred Make sure that the power cable is connected
properly and it is inserted securely. Resend
the job.
Store to e-Filing
2B10 There was no applicable job. Retry the scan.
2B11 Job status failed. Retry the scan. The system could not store
the scan job.
2B20 Failed to access file. Retry the scan. The system could not store
the scan job.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 209 Sonntag, 13. Februar 2005 2:57 14
210 9.JOB STATUS
12.ERROR CODE (Cont.)
9
2B30 Insufficient disc space. Delete unnecessary documents in e-Filing
and try again.
2B31 Failed to access Electronic Filing. Make sure that the specified e-Filing or folder
exists. (If not, this error would not occur.).
Delete the specified e-Filing or folder and
reset them. Retry the job in error. If the
specified e-Filing or folder cannot be deleted,
contact your service representative.
2B32 Failed to print Electronic Filing
document.
Make sure that the specified document exists.
(If not, this error would not occur.). Delete the
specified document. Retry the job in error. If
the specified document cannot be deleted,
contact your service representative.
2B50 Failed to process image. Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2B51 Failed to process print image. Make sure that the Function List can be
printed out. Retry the print. If the error still
occurs, contact your service representative.
2B60 Duplicate error. Changed folder name
automatically.
There is the same named folder in the
selected box. The system automatically
renames the folder.
2B70 Duplicate error. Changed document
name automatically.
There is the same named document in the
selected box or folder. The system
automatically renames the document.
2B90 Insufficient Memory. Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2BA0 Invalid Box password specified. Make sure that the password is correct and
retry the scan, or reset the password and retry
the scan. When this error occurs for the print
of the data in the e-Filing, perform the print
with the administrator's password. If the
recovery is still not completed or in case of
invalid password for the operation other than
printing (opening the file, etc.), contact your
service representative.
2BB0 Job canceled (Job was canceled by the user.)
2BB1 Power failure occurred Make sure that the power cable is connected
properly and it is inserted securely.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 210 Sonntag, 13. Februar 2005 2:57 14
211
9
Printer
2BC0 System fatal error. Turn the power OFF and then back ON. Retry
the print. If the error still occurs, contact your
service representative.
2BC1 Failed to acquire resource. Turn the power OFF and then back ON. Retry
the print. If the error still occurs, contact your
service representative.
2B60 ERRCD_SCAN_BOX_FOLDER_DUPLI
CATE
Check the folder to be made.
2B70 ERRCD_SCAN_BOX_DOCUMENT_DU
PLICATE
Check the data to be stored.
2B71 ERRCD_SCAN_BOX_DOCUMENT_EX
PIRE
Check the storage period.
2B80 ERRCD_SCAN_BOX_HDD_NEARFUL
L
Delete the unnecessary data in HDD.
2BD0 ERRCD_SCAN_BOX_RESTORE_FAIL
ED
Check the power cable.
2BE0 ERRCD_SCAN_BOX_MCNTBL_ERRO
R
Turn the power OFF and then back ON to print
again.
2BF0 ERRCD_SCAN_BOX_MAX_PAGE Reduce the pages to be inserted, and print
them.
2BF1 ERRCD_SCAN_BOX_MAX_DOCUME
NT
Backup the document in the Box or the folder
to PC, or delete them.
2BF2 ERRCD_SCAN_BOX_MAX_FOLDER Backup the document in the Box or the folder
to PC, or delete them.
Error Code Cause & Message Corrective Action
402F PM size error Memory full. Contact your service
representative.
4030 No print enabler/invalid Check if the print enabler is connected
properly and it is inserted securely. Or check if
the trial period is expired.
4031 HDD full for printing Too many jogs of Private print and Department
code print are stored in HDD. Perform the jobs
or delete them.
A221 Print job cancel Print job is canceled. Retry the print.
A222 Print Job power interruption Power failure occurred. Retry the print.
Error Code Cause & Message Corrective Action
HUD_PPC_EU.book Seite 211 Sonntag, 13. Februar 2005 2:57 14
212 9.JOB STATUS
12.ERROR CODE (Cont.)
9
RFC related
Error Code Cause & Message Corrective Action
2500 Syntax error, command unrecognized:
HOST NAME error, Destination mail
address error, Terminal mail address
error
Check if the Terminal mail address and
Destination mail address are correct. Check if
the mail server is operating properly. Turn the
power OFF and then back ON. Perform the job
in error again.
2501 Syntax error in parameters or arguments:
HOST NAME error, Destination mail
address error, Terminal mail address
error
Check if the Terminal mail address and
Destination mail address are correct. Check if
the mail server is operating properly. Turn the
power OFF and then back ON. Perform the job
in error again.
2503 Destination mail address error Check if the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2504 HOST NAME error Check if the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2550 Destination mail address error Check the state of the mail box in the mail
server.
2551 Destination mail address error Check if the mail server is operating properly.
Turn the power OFF and the back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2552 Terminal/Destination mail address error Turn the power OFF and the back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2553 Destination mail address error Check if there is an illegal character in the mail
box in the mail server.
HUD_PPC_EU.book Seite 212 Sonntag, 13. Februar 2005 2:57 14
213
10
10. e-FILING
1. e-FILING FUNCTIONS ......................................................................................................214
2. SETTING UP BOX.............................................................................................................216
3. CHANGING INPUT DATA..................................................................................................218
4. DELETING BOX ................................................................................................................220
5. DELETING FOLDER .........................................................................................................221
6. DELETING DOCUMENT ...................................................................................................223
7. PRINTING STORED DOCUMENT ....................................................................................225
HUD_PPC_EU.book Seite 213 Sonntag, 13. Februar 2005 2:57 14
214 10.e-FILING
10
1. e-FILING FUNCTIONS
In this e-Filing functions, the documents obtained by copying, scanning, printing, Fax receiving, Internet Fax
and E-mail reception can be managed in the e-Filing (hard disc) inside the equipment. Before you use the
e-Filing, you need to set up it. The e-Filing consists of one public box and user boxes up to 200. You can
store a number of documents in each box, and then print the stored documents later as required.
- e-filing can be operated with the equipment or a client PC via network. For the operation via network, see
the [e-Filing Guide].
* If the preservation period for documents is specified for a user box in the e-Filing web utility, the stored
documents will be deleted after that period has passed. Before that, you need to print the documents, or
download them with a client PC using the File Downloader. See the [e-Filing Guide] for details.
* It is recommended to back up the data on the equipment's hard disc to prevent loss of data. You can back
it up with the client PC using the File Downloader. See the [e-Filing Guide] for details.
- To obtain documents by scanning, Internet Fax reception, or E-mail reception, ‘optional Printer kit (GM-
1010) and optional Scanner upgrade kit (GM-3010)’, or ‘optional Printer/Scanner kit (GM-2010)’ is
required.
- To obtain documents by printing from the client PC via network, ‘optional Printer kit (GM-1010)’ or
‘optional Printer/Scanner kit (GM-2010)’ is required.
The following figure shows the functional diagram of the e-Filing.
1 : Store the document.
2 : Add the printing settings to the stored documents as required.
3 : Print the documents.
4 : The documents can be viewed, edited, merged (Copy/Paste), and printed by the e-Filing web utility via
network. Also, the documents can be downloaded by the File Downloader, and imported into TWAIN-
compliant applications by the TWAIN driver. See the [e-Filing Guide] for details.
HDD
1 3
2
4
HUD_PPC_EU.book Seite 214 Sonntag, 13. Februar 2005 2:57 14
215
10
With the equipment, documents can be stored in the e-Filing as the original data by copying or scanning.
("1.STORE TO e-FILING" Page 136, "2.SCAN TO e-FILING" Page 146) The documents stored in
the e-Filing can be printed by specifying some pages or “All Pages” after adding/changing printing settings
as required. Also, unnecessary documents can be deleted by the user box, folder or document.
The following table shows the main difference between the operation by the equipment and that by a client
PC using the e-Filing web utility via network.
The following shows the basic configuration of the e-Filing.
The public box is a pre-set box by default in the equipment. Use it to store documents that any user may
need to work with. Up to 200 user boxes can be registered. It can be registered as a password-protected
user box by setting the password. Before storing documents in e-Filing, prepare the user boxes to manage
documents efficiently.
- Up to 100 folders per one box can be created (can only be set via the network). See the [e-Filing Guide]
for details.
- Up to 400 documents can be stored in a box or a folder. The Maximum page number of a document is
200.
Function Equipment (Touch Panel) Client PC
Creating the user box Yes Yes
Creating the folder in the user box No Yes
Deleting the user box Yes Yes
Deleting the folder or document in the user box Yes Yes
Editing the documents (combining, switching, etc.) No Yes
Public box Shared document 1, Shared document 2, ...
User box 001 Document 1
Document 2
Folder 1 Document 1
Document 2
HUD_PPC_EU.book Seite 215 Sonntag, 13. Februar 2005 2:57 14
216 10.e-FILING
10
2. SETTING UP BOX
The e-Filing consists of one public box and user boxes up to 200. The public box is a pre-set box since the
installation of the equipment, and no setting up is required. The user box can be set/registered by giving a
box name. If the password is set, the box is protected and important documents can be stored safely. Up
to 200 user boxes can be set/registered.
* Before storing documents in the e-Filing, we recommend you to prepare user boxes and folders (can only
be set in the network) to manage documents efficiently. See the [e-Filing Guide] for details.
1
Press the [e-FILING] button on the control
panel.
2
Select the blank buttons numbered from
001 to 200, and then press the [SETUP]
button.
3
Set the “BOX NAME”. Then, set the
“Password” as required.
- When pressing the [BOX NAME] button, the letter entry menu
("3.ENTERING LETTERS" Page 142) is displayed. A box
name can contain up to 32 letters.
- Key in the 5-digit identical number in both “Password” and
“Retype Password”. Press the [SET] button after entering the
password.
HUD_PPC_EU.book Seite 216 Sonntag, 13. Februar 2005 2:57 14
217
10
4
Press the [ENTER] button.
- A box is newly set.
HUD_PPC_EU.book Seite 217 Sonntag, 13. Februar 2005 2:57 14
218 10.e-FILING
10
3. CHANGING INPUT DATA
The “registered box name” and “password” of the user box can be changed.
* You cannot change the folder name with the equipment. Change it with a client PC using the e-Filing web
utility via network, if required. See the [e-Filing Guide] for details.
1
Press the [e-FILING] button on the control
panel.
2
Select the box you want to change, and
then press the [EDIT] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired box you want to change.
3
Key in the “Password” (5 digits) for the
selected box, and then press the [ENTER]
button.
- If the password has not been set at the box registration, skip to
step 4.
4
Change the data of the “BOX NAME” and
the “Password”.
- When pressing the [BOX NAME] button, the letter entry menu
("3.ENTERING LETTERS" Page 142) is displayed. A box
name can contain up to 32 letters.
- Key in the 5-digit identical number in both “Password” and
“Retype Password”. Press the [SET] button after entering the
password.
HUD_PPC_EU.book Seite 218 Sonntag, 13. Februar 2005 2:57 14
219
10
5
Press the [ENTER] button.
- The box settings are updated.
HUD_PPC_EU.book Seite 219 Sonntag, 13. Februar 2005 2:57 14
220 10.e-FILING
10
4. DELETING BOX
The unnecessary user box can be deleted. In this case, all the documents in a user box are also deleted.
* The public box cannot be deleted.
* You cannot delete the folder in a user box with the equipment. Delete it with a client PC using the e-Filing
web utility via network, if required. See the [e-Filing Guide] for details.
1
Press the [e-FILING] button on the control
panel.
2
Select the box you want to delete, and
then press the [DELETE] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired box you want to change.
3
Key in the “Password” (5 digits) for the
selected box, and then press the [ENTER]
button.
- If the password has not been set at the box registration, skip to
step 4.
4
“Are you sure you want to delete this
BOX?” appears. Press the [YES] button to
delete the box.
- The selected box is deleted.
HUD_PPC_EU.book Seite 220 Sonntag, 13. Februar 2005 2:57 14
221
10
5. DELETING FOLDER
An unnecessary folder can be deleted. In this case, all the documents in the folder are also deleted.
1
Press the [e-FILING] button on the control
panel.
2
Select the box in which the folder you
want to delete is stored, and then press
the [ENTER] button.
3
Key in the “Password” (5 digits) for the
selected box, and then press the [ENTER]
button.
- If the password has not been set at the box registration, skip to
step 4.
4
Select the folder you want to delete, and
then press the [DELETE] button.
HUD_PPC_EU.book Seite 221 Sonntag, 13. Februar 2005 2:57 14
222 10.e-FILING
5.DELETING FOLDER (Cont.)
10
5
“Are you sure you want to delete this
folder?” appears. Press the [YES] button
to delete the folder.
- The selected folder is deleted.
HUD_PPC_EU.book Seite 222 Sonntag, 13. Februar 2005 2:57 14
223
10
6. DELETING DOCUMENT
The document stored in the user box and folder can be deleted.
1
Press the [e-FILING] button on the control
panel.
2
Select the box in which the document you
want to delete is stored, and then press
the [ENTER] button.
3
Key in the “Password” (5 digits) for the
selected box, and then press the [ENTER]
button.
- If the password has not been set at the box registration, skip to
step 4.
HUD_PPC_EU.book Seite 223 Sonntag, 13. Februar 2005 2:57 14
224 10.e-FILING
6.DELETING DOCUMENT (Cont.)
10
4
To delete the document in the box, select
the document you want to delete, and
then press the [DELETE] button.To delete
the document in the folder, select the
folder in which the document you want to
delete is stored, and then press the
[OPEN FOLDER] button. And select the
document you want to delete, and then
press the [DELETE] button.
5
“Are you sure you want to delete this
document?” appears. Press the [YES]
button to delete the document.
- The selected document is deleted.
HUD_PPC_EU.book Seite 224 Sonntag, 13. Februar 2005 2:57 14
225
10
7. PRINTING STORED DOCUMENT
Documents stored in the box or the folder can be printed.
State of finishing can be selected. And to confirm the printing content, test printing can also be performed.
Print the whole Document.
All the pages of the document will be printed. If printing multiple copies is desired, see "Printing the Stored
Document with Added/Changed Settings" Page 227.
1
Press the [e-FILING] button on the control
panel.
2
Select the box which has the desired
printing document stored, and then press
the [ENTER] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired box you want to change.
3
Key in the “Password” (5 digits) for the
selected box, and then press the [ENTER]
button.
- If the password has not been set at the box registration, skip to
step 4.
4
Select the document to be printed.
- When you want to select the document in the folder, select the
folder and press the [OPEN FOLDER] button. And then select the
desired document.
HUD_PPC_EU.book Seite 225 Sonntag, 13. Februar 2005 2:57 14
226 10.e-FILING
7.PRINTING STORED DOCUMENT (Cont.)
10
5
Press the [PRINT] button.
- Printing of the whole document starts.
When you want to stop the print of the stored document during the
operation, select the job you want to stop from the PRINT JOB
screen or SCAN JOB screen and then press the [DELETE] button.
For details, see the JOB STATUS.
"Deleting a Job" Page 183
"7.CONFIRMING THE STATUS OF SCAN" Page 193
Execute Test Printing
A part can be printed from a document that consists of several pages.
1
Perform steps 1 to 4 of the “Print the
whole Document”.
2
Press the [TEST PRINT] button.
3
Key in the number of the first and the last
pages to specify the printing pages.
- After keying them in, press the [ENTER] button.
- To correct page, press the [CANCEL] button.
- When printing all pages are desired, press the [ALL PAGES]
button.
HUD_PPC_EU.book Seite 226 Sonntag, 13. Februar 2005 2:57 14
227
10
4
Press the [PRINT] button.
- Printing the set page starts.
When you want to stop the print of the stored document during the
operation, select the job you want to stop from the PRINT JOB
screen or SCAN JOB screen and then press the [DELETE] button.
For details, see the JOB STATUS.
"Deleting a Job" Page 183
"7.CONFIRMING THE STATUS OF SCAN" Page 193
Printing the Stored Document with Added/Changed Settings
The following settings can be added (or changed) to the stored document in the filing box.
1: Setting the feeding source (Press the cassette area of the feeding source)
2: Setting the number of printing (Key in by the digital key)
3: Setting single-side printing/duplex printing.
4: Setting the finishing mode setting (Selection of the mode is limited depending on the installed option
equipment)
5: Setting the paper exit (Can be set when an optional finisher is installed.)
6: Setting the image shift position
7: Setting the added date and time position
8: Setting of page number position
1
Perform steps 1 to 4 of the “Print the
whole Document”.
231
5
4
7
8
6
HUD_PPC_EU.book Seite 227 Sonntag, 13. Februar 2005 2:57 14
228 10.e-FILING
7.PRINTING STORED DOCUMENT (Cont.)
10
2
Press the [SETTINGS] button.
3
Set printing as required.
- See the previous page for details. As for the settings of 3 to 8,
press the button, select the desired button in the menu and press
the [ENTER] button.
4
Press the [PRINT] button.
- Printing starts.
When you want to stop the print of the stored document during the
operation, select the job you want to stop from the PRINT JOB
screen or SCAN JOB screen and then press the [DELETE] button.
For details, see the JOB STATUS.
"Deleting a Job" Page 183
"7.CONFIRMING THE STATUS OF SCAN" Page 193
HUD_PPC_EU.book Seite 228 Sonntag, 13. Februar 2005 2:57 14
229
11
11. TEMPLATE
1. TEMPLATE ........................................................................................................................230
2. RECALLING TEMPLATE...................................................................................................231
3. REGISTERING TEMPLATE...............................................................................................234
4. CHANGING INPUT DATA..................................................................................................240
5. DELETING TEMPLATE .....................................................................................................245
HUD_PPC_EU.book Seite 229 Sonntag, 13. Februar 2005 2:57 14
230 11.TEMPLATE
11
1. TEMPLATE
A combination of functions frequently used can be registered as a template and recalled as required
* You can register the setting combination of copy functions, scan functions or Fax functions as a template
and retrieve it.
The combinations are registered in either “PUBLIC TEMPLATE GROUP” or “USER GROUP (Up to 200
groups are available.)” in the menu of template. Up to 60 combinations can be registered in 1 group.
- To use scan functions, ‘optional Printer kit (GM-1010) and optional Scanner upgrade kit (GM-3010)’, or
‘optional Printer/Scanner kit (GM-2010)’
- To use Fax functions, ‘optional Fax board (GD-1150)’ is required.
1 : Register the combination of the functions.
2 : Place the original.
3 : Retrieve the desired template.
3
1
2
HDD
90 %
2004.3.15
2004.3.15
2004.3.15
2004.3.15
HUD_PPC_EU.book Seite 230 Sonntag, 13. Februar 2005 2:57 14
231
11
2. RECALLING TEMPLATE
All you have to do is to press the [START] button (the [SCAN] button on the touch panel for scanning) after
recalling the required template.
The operation of the registered setting functions is automatically started by pressing the template button
with the icon if “ENABLE” is selected for "AUTOMATIC START" when registering the template.
* Before recalling templates, you need to register them. See "3.REGISTERING TEMPLATE" Page 234.
When Recalling Template in the Public Group
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [TEMPLATE] button on the
control panel.
- Menu for recalling template is displayed.
4
Press the “PUBLIC TEMPLATE GROUP”.
HUD_PPC_EU.book Seite 231 Sonntag, 13. Februar 2005 2:57 14
232 11.TEMPLATE
2.RECALLING TEMPLATE (Cont.)
11
5
Select the desired template.
- When the template button with the
icon is pressed, the
operation of the registered setting functions is automatically
started.
6
Confirm that “Updated the template
setting” is displayed on the screen.
zSelect other copy mode as required.
7
Press the [START] button.
When Recalling Template in the User Group
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [TEMPLATE] button on the
control panel.
- Menu for recalling template is displayed.
4
Press the group registered the template
you want to recall.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired user group.
HUD_PPC_EU.book Seite 232 Sonntag, 13. Februar 2005 2:57 14
233
11
5
Key in the Password (5 digits) of the
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip
this procedure and go to step 6.
6
Select the desired template.
- When the template button with the
icon is pressed, the
operation of the registered setting functions is automatically
started.
7
Key in the Password (5 digits) of the
selected template, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip
this procedure and go to step 8.
8
Confirm that “Updated the template
setting” is displayed on the screen.
zSelect other copy mode as required.
9
Press the [START] button.
HUD_PPC_EU.book Seite 233 Sonntag, 13. Februar 2005 2:57 14
234 11.TEMPLATE
11
3. REGISTERING TEMPLATE
To recall the template, you need to first register the setting combination as a template.
The template is registered either in “PUBLIC TEMPLATE GROUP” or “USER GROUP” depending on your
purpose.
- PUBLIC TEMPLATE GROUP:
Anyone can use the template when the setting combination of the functions frequently used throughout
the company or organization have been registered in this group. Up to 60 combinations (templates) are
available in this group. According to the purpose of use, you can restrict the use by entering the password.
- USER GROUP:
Each department, section or person controls one user group and registers it as a template. It is easier to
control it if you set the password for group registration. Up to 200 groups can be set and up to 60
combinations (templates) are available in this group.
* When registering the template in the public template group, keying in the “Admin Password” is required.
Registering the Template in the Public Template Group
1
Set every function you want to combine.
- Ex.: Setting “Image shift”, “90% Reduction” and “10 sets of
copies” of the copy function.
2
Press the [TEMPLATE] button on the
control panel.
3
Press the [REGISTRATION] button.
4
Select “PUBLIC TEMPLATE GROUP”, and
then press the [ENTER] button.
HUD_PPC_EU.book Seite 234 Sonntag, 13. Februar 2005 2:57 14
235
11
5
Press the [PASSWORD] button and then
key in the “Admin Password” (6 to 10
digits).
- When pressing the [PASSWORD] button, the letter entry menu is
displayed. Key in the password, and then press the [ENTER]
button.
6
Press the blank key in the template menu,
and then press the [SAVE] button.
7
Enter the data for registering template.
- Although either the “NAME 1” or the “NAME 2” must be entered,
the “USER NAME” and the “PASSWORD” are entered as
required.
- When pressing the [NAME 1] button, the menu of entering letters
("3.ENTERING LETTERS" Page 142) is displayed, so enter
the name with up to 11 letters.
- Enter the name with up to 11 letters for “NAME 2” and with up to
30 letters for “USER NAME” as the above manner.
8
Select whether to enable “AUTOMATIC
START” or not for recalling the template.
- Press the [ENABLE] or [DISABLE] button.
- If "ENABLE” is selected, the
icon is added to the template
button.(The operation of the registered setting functions is
automatically started by pressing the template button with the
icon when recalling the template.)
HUD_PPC_EU.book Seite 235 Sonntag, 13. Februar 2005 2:57 14
236 11.TEMPLATE
3.REGISTERING TEMPLATE (Cont.)
11
9
When pressing the [PASSWORD] button
on the menu of step 7, the menu is
switched as shown on the right. Key in a
5-digit identical number in both
“Password” and “Retype Password”, and
then press the [ENTER] button.
- Press the [ENTER] button after entering the password.
10
Press the [SAVE] button.
- The menu returns to step 1. (the menu before pressing the
[TEMPLATE] button on the control panel.)
Registering the Template in the User Group
1
Set every function you want to combine.
- Ex.: Setting “Image shift”, “90% Reduction” and “10 sets of
copies” of the copy function.
2
Press the [TEMPLATE] button on the
control panel.
3
Press the [REGISTRATION] button.
HUD_PPC_EU.book Seite 236 Sonntag, 13. Februar 2005 2:57 14
237
11
4
Select the “USER GROUP” of blank
buttons from 001 to 200, and then press
the [ENTER] button.
- When selecting the unregistered “USER GROUP”, follow step 5.
- When selecting the registered “USER GROUP”, key in “GROUP
PASSWORD” (5 digits) on the next menu, and then skip to step 8.
5
Enter the data for registering the new user
group.
- Although the “NAME” must be entered, the “USER NAME” and
the “PASSWORD” are entered as required.
- When pressing the [NAME] button, the menu of entering letters
("3.ENTERING LETTERS" Page 142) is displayed, so enter
the name with up to 20 letters.
- Enter the name with up to 30 letters for the [USER NAME] as the
above manner.
6
When pressing the [PASSWORD] button
on the menu of step 5, the menu is
switched as shown on the right. Key in a
5-digit identical number in both
“Password” and “Retype Password”, and
then press the [ENTER] button.
- Press the [SET] button after entering the password.
HUD_PPC_EU.book Seite 237 Sonntag, 13. Februar 2005 2:57 14
238 11.TEMPLATE
3.REGISTERING TEMPLATE (Cont.)
11
7
Press the empty [TEMPLATE] button, and
then press the [SAVE] button.
8
Enter the data requested.
- Although either the “NAME 1” or the “NAME 2” must be entered,
the “USER NAME” and the “PASSWORD” are entered as
required.
- When pressing the [NAME 1] button, the menu of entering letters
("3.ENTERING LETTERS" Page 142) is displayed, so enter
the name with up to 11 letters.
- Enter the name with up to 11 letters for “NAME 2” and with up to
30 letters for “USER NAME” as the above manner.
9
Select whether to enable “AUTOMATIC
START” or not for recalling the template.
- Press the [ENABLE] or [DISABLE] button.
- If "ENABLEis selected, the
icon is added to the template
button.(The operation of the registered setting functions is
automatically started by pressing the template button with the
icon when recalling the template.)
10
When pressing the [PASSWORD] button
on the menu of step 8, the menu is
switched as shown on the right. Key in a
5-digit identical number in both
“Password” and “Retype Password”, and
then press the [ENTER] button.
- Press the [ENTER] button after entering the password.
HUD_PPC_EU.book Seite 238 Sonntag, 13. Februar 2005 2:57 14
239
11
11
Press the [SAVE] button.
- The menu returns to step 1, which is the menu seen before
pressing the [TEMPLATE] button on the control panel.
HUD_PPC_EU.book Seite 239 Sonntag, 13. Februar 2005 2:57 14
240 11.TEMPLATE
11
4. CHANGING INPUT DATA
The registered name, user name, password of template/user group can be changed.
Changing the Data of Template
1
Press the [TEMPLATE] button on the
control panel.
2
Press the [REGISTRATION] button
3
Select the group (in which the template
was registered) that you want to change,
and then press the [ENTER] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
desired user group.
4
When selecting the [PUBLIC TEMPLATE
GROUP] button, key in the “Admin
Password” (6 to 10 digits), and then press
the [ENTER] button. When selecting a
user group, key in the selected group’s
“Password” (5 digits), and then press the
[ENTER] button.
- If the password has not been set at the user group registration,
skip to step 5.
HUD_PPC_EU.book Seite 240 Sonntag, 13. Februar 2005 2:57 14
241
11
5
Select the template you want to change,
and then press the [EDIT] button.
6
Key in the “Password” (5 digits) for the
selected template, and then press the
[ENTER] button.
- If the password has not been set at the template registration, skip
to step 7.
7
Press the button of “NAME 1”, “NAME 2”
and/or “USER NAME”.
- When pressing the [NAME 1] button, the menu of entering letters
("3.ENTERING LETTERS" Page 142) is displayed, so enter
the name with up to 11 letters.
- Enter the name with up to 11 letters for the “NAME 2” and with up
to 30 letters for the “USER NAME” as the above manner.
- Change the setting of "AUTOMATIC START" as required. (Press
the [ENABLE] or [DISABLE] button.)
- To change the password only, skip step 7.
HUD_PPC_EU.book Seite 241 Sonntag, 13. Februar 2005 2:57 14
242 11.TEMPLATE
4.CHANGING INPUT DATA (Cont.)
11
8
When pressing the [PASSWORD] button
on the menu of step 7, the menu is
switched as shown on the right. Key in the
changed number (5-digits identical
number) in both “Password” and “Retype
Password”, then press the [ENTER]
button.
- Press the [ENTER] button after entering the password.
- Not to change the password, skip step 8.
9
Press the [ENTER] button.
- The data of template are changed.
Changing the Data of User Group
Those of public group cannot be changed.
1
Press the [TEMPLATE] button on the
control panel.
2
Press the [REGISTRATION] button.
HUD_PPC_EU.book Seite 242 Sonntag, 13. Februar 2005 2:57 14
243
11
3
Select the “USER GROUP” you want to
change, and then press the [EDIT] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired user group using the digital keys.
4
Key in the “Password” (5 digits) for
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip to
step 5.
5
Press the [NAME] button and/or the
[USER NAME] button.
- When pressing the NAME button, the menu of entering letters
("3.ENTERING LETTERS" Page 142) is displayed, so enter
the name with up to 20 letters.
- Enter the name with up to 30 letters for the “USER NAME” as the
above manner.
- To change the password only, skip step 5.
6
When pressing the [PASSWORD] button
on the menu of step 5, the menu is
switched as shown on the right. Key in the
changed number (5-digit identical
number) in both “Password” and “Retype
Password”, then press the [ENTER]
button.
- Not to change the password, skip step 5.
HUD_PPC_EU.book Seite 243 Sonntag, 13. Februar 2005 2:57 14
244 11.TEMPLATE
4.CHANGING INPUT DATA (Cont.)
11
7
Press the [ENTER] button.
- The data of user group are changed.
HUD_PPC_EU.book Seite 244 Sonntag, 13. Februar 2005 2:57 14
245
11
5. DELETING TEMPLATE
Unnecessary templates can be deleted. You can also delete user groups.
Deleting a Template
1
Press the [TEMPLATE] button on the
control panel.
2
Press the [REGISTRATION] button.
3
Select the group (in which the template
was registered) that you want to delete,
then press the [ENTER] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
desired user group.
4
When selecting the [PUBLIC TEMPLATE
GROUP] button, key in the “Admin
Password” (6 to 10 digits) using the digital
keys, and then press the [ENTER] button.
When selecting a user group, key in the
selected group “Password” (5 digits)
using the digital keys, and then press the
[ENTER] button.
- If the password has not been set at the user group registration,
skip to step 5.
HUD_PPC_EU.book Seite 245 Sonntag, 13. Februar 2005 2:57 14
246 11.TEMPLATE
5.DELETING TEMPLATE (Cont.)
11
5
Select the template you want to delete,
then press the [DELETE] button.
6
Key in the “Password” (5 digits) for the
selected template, and then press the
[ENTER] button.
- If the password has not been set at the user group registration,
skip to step 7.
7
Press the [DELETE] button.
- The selected template is deleted.
HUD_PPC_EU.book Seite 246 Sonntag, 13. Februar 2005 2:57 14
247
11
Deleting a User Group
1
Press the [TEMPLATE] button on the
control panel.
2
Press the [REGISTRATION] button.
3
Select the user group you want to delete,
and then press the [DELETE] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
desired user group.
4
Key in the “Password” (5 digits) for the
selected group, and then press the
[ENTER] button.
- If the password has not been set at the user group registration,
skip to step 5.
HUD_PPC_EU.book Seite 247 Sonntag, 13. Februar 2005 2:57 14
248 11.TEMPLATE
5.DELETING TEMPLATE (Cont.)
11
5
Press the [DELETE] button.
- The selected user group is deleted.
HUD_PPC_EU.book Seite 248 Sonntag, 13. Februar 2005 2:57 14
249
12
12. WHEN THE GRAPHIC
SYMBOLS BLINK ON THE
TOUCH PANEL
1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS...............................................250
2. ADD PAPER SYMBOL.......................................................................................................252
Adding Paper to the Drawers.............................................................................................252
Adding Paper to the Large Capacity Feeder (Optional).....................................................253
3. REPLACE TONER CARTRIDGE SYMBOL.......................................................................254
4. REPLACE TONER BAG SYMBOL ....................................................................................258
5. CLEAR PAPER SYMBOL ..................................................................................................259
6. ADDING STAPLES (OPTIONAL).......................................................................................273
7. REMOVING JAMMED STAPLES (OPTIONAL).................................................................279
8. DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)...........................................286
9. CALL SERVICE SYMBOL/PERIODIC MAINTENANCE MESSAGE.................................287
HUD_PPC_EU.book Seite 249 Sonntag, 13. Februar 2005 2:57 14
250 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
1.
DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS
The graphic symbol on the touch panel shows the status of the equipment. When one of the graphic
symbols blinks, take the appropriate action referring to the page shown.
1: CHECK ORIGINALS symbol
Blinks when an original misfeed occurs inside the reversing automatic document feeder.
"1. Paper Misfeed in the Reversing Automatic Document Feeder (optional)" Page 259
2: RELAY UNIT MISFEED symbol
Blinks when a paper misfeed occurs in the relay unit.
"9. Paper Misfeed in the Relay Unit (optional)" Page 266
3: FUSER MISFEED symbol
Blinks when a paper misfeed occurs in the fuser unit.
"7. Paper Misfeed in the Fuser Unit" Page 264
4: DUPLEXER MISFEED symbol
Blinks when a paper misfeed occurs inside the automatic duplexer.
"5. Paper Misfeed in the Automatic Duplexer" Page 263
5: BYPASS MISFEED symbol
Blinks when a sheet of paper fails to be fed into the equipment during bypass copying.
"4. Paper Misfeed on the Bypass Feed Unit" Page 263
6: DRAWER MISFEED symbol
Blinks when paper fed from one of the drawers is misfed.
"2. Paper Misfeed in the Drawer Feeding Area" Page 261
7: OPTIONAL FEEDER MISFEED symbol
Blinks when paper fed from the large capacity feeder (optional) is misfed.
"3. Paper Misfeed in the Large Capacity Feeder (optional)" Page 262
8: JAM RELEASING UNIT MISFEED symbol
Blinks when a misfeed occurs in the jam releasing unit.
"6. Paper Misfeed in the Jam Releasing Unit" Page 264
123
4
5
6
7
8
9
10
11
12
13
HUD_PPC_EU.book Seite 250 Sonntag, 13. Februar 2005 2:57 14
251
12
9: REPLACE TONER CARTRIDGE symbol
Blinks when the toner cartridge runs out of toner.
"3.REPLACE TONER CARTRIDGE SYMBOL" Page 254
10: REPLACE TONER BAG symbol
Blinks when the toner bag becomes full of used toner.
"4.REPLACE TONER BAG SYMBOL" Page 258
11: SADDLE STITCHING UNIT MISFEED symbol
Blinks when a paper misfeed occurs inside the saddle stitch unit of the finisher (optional).
"13. Paper Misfeed in the Saddle-stitch Finisher (optional: MJ-1024)" Page 270
12: FINISHER/HOLE PUNCH UNIT MISFEED symbol
Blinks when a paper misfeed occurs inside the finisher (optional) or hole punch unit (optional).
"10. Paper Misfeed in the Hole Punch Unit (optional)" Page 267
13: CALL SERVICE symbol
Blinks when inspection and maintenance by a service technician are necessary.
"Call Service Symbol" Page 287
HUD_PPC_EU.book Seite 251 Sonntag, 13. Februar 2005 2:57 14
252 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
2. ADD PAPER SYMBOL
Adding Paper to the Drawers
When the paper in the selected drawer or the large capacity feeder (optional) runs out, the drawer or large
capacity feeder on the screen blinks, and “Add paper” appears. Add paper as the following procedure.
1
Pull out the drawer carefully until it comes
to a stop.
2
Place paper in the drawer(s).
- Place paper face up.
- Maximum number of sheets that can be set. "Acceptable Copy
Paper Types and Sizes" Page 36
- Fan the paper well before placing it in the drawer.
- Do not add paper above the line indicated on the guide.
- Do not use creased, folded, wrinkled or damp sheets of paper.
Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is
left between the paper and the side guide. If there is no gap, this
could cause paper misfeeding.
3
Push the drawer straight into the
equipment until it comes to a stop.
- Be sure to push the drawer carefully and fully in.
- This procedure can be used to add paper to any of the drawers in
the paper feed pedestal (optional) as well.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
0.5mm
(0.02'')
HUD_PPC_EU.book Seite 252 Sonntag, 13. Februar 2005 2:57 14
253
12
Adding Paper to the Large Capacity Feeder (Optional)
1
Pull out the large capacity feeder carefully
until it comes to a stop.
2
Set paper aligned in tray (A) and tray (B).
- Place paper face up.
- Maximum number of sheets that can be set. "Acceptable Copy
Paper Types and Sizes" Page 36
- Fan the paper well, then set it for (A) to the right side, and set it
for (B) to the left side. (The paper can be set neatly if you pile up
the paper little by little alternately in the tray (A) and (B).) Be sure
that the centre lever is not open. (Refer to the labels attached in
the large capacity feeder.)
- Do not add paper above the line indicated on the guide.
- Paper starts being fed from the elevator tray (A) at first, and when
it runs out, the paper on the tray (B) moves to the position (A).
- Do not use creased, folded, wrinkled or damp sheets of paper.
3
Push the drawer of the large capacity
feeder straight into the equipment until it
comes to a stop.
- Close it completely. The elevator tray automatically moves up to
the paper feeding position.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
(B)
(A)
HUD_PPC_EU.book Seite 253 Sonntag, 13. Februar 2005 2:57 14
254 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
3. REPLACE TONER CARTRIDGE SYMBOL
When the toner in the cartridge runs out, the REPLACE TONER CARTRIDGE symbol blinks and “Install
new toner cartridge” appears.
HUD_PPC_EU.book Seite 254 Sonntag, 13. Februar 2005 2:57 14
255
12
Recommendation for Original Toner
At Toshiba we strive to provide you with the highest quality images. Please use genuine Toshiba toner to
ensure that you continue to receiving quality output that is environmentally safe.
Replacing the Toner Cartridge
1
Open the front cover.
HUD_PPC_EU.book Seite 255 Sonntag, 13. Februar 2005 2:57 14
256 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.)
12
2
While pushing on the latch, open the
cartridge holder.
3
Pull the cartridge out carefully.
- If you cannot pull it straight out, pull it out rotating it clockwise.
If it cannot be pulled out, close the front cover, turn the power OFF
and then ON again. When “Install new Toner cartridge” appears,
start the procedure again from step 1.
To turn the power OFF, see "Turning off the Power (Shutting down)"
Page 30.
NEVER attempt to incinerate toner cartridges. This could cause an
explosion.
DO NOT dispose of used toner cartridges. Your service technician
will collect them.
4
Tap and shake the new toner cartridge
well to loosen the toner inside.
HUD_PPC_EU.book Seite 256 Sonntag, 13. Februar 2005 2:57 14
257
12
5
Stand the toner cartridge upright, and pull
out the seal in the direction of the arrow.
6
Insert the cartridge completely.
- Align the cartridge so that its shutter (orange) comes upper side,
then insert it.
- If the cartridge becomes dirty with toner, clean it before inserting
it.
7
Return the cartridge holder to its original
position.
8
Close the front cover.
- “Wait adding toner” appears. The equipment automatically starts
supplying toner.
HUD_PPC_EU.book Seite 257 Sonntag, 13. Februar 2005 2:57 14
258 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
4. REPLACE TONER BAG SYMBOL
When the toner bag becomes full of used toner, the REPLACE TONER BAG symbol blinks and “Dispose
of used toner” appears.
1
Open the front cover.
2
Pull the toner bag out carefully.
NEVER attempt to incinerate toner bags. This could cause an
explosion.
DO NOT dispose of used toner bags. Your service technician will
collect them.
3
Put the lid on the toner bag.
4
Set a new toner bag, and then close the
front cover.
HUD_PPC_EU.book Seite 258 Sonntag, 13. Februar 2005 2:57 14
259
12
5. CLEAR PAPER SYMBOL
When a paper misfeed occurs in the equipment, the or symbol on the touch panel blinks in the
positions where the paper is misfed. In that case, remove the misfed paper using the following procedure
referring to the illustration below.
1. Paper Misfeed in the Reversing Automatic Document Feeder (optional)
1
Push the button on the reversing
automatic document feeder to open the
upper cover.
- Remove any misfed originals.
6
13
12
19 8
5
4
2
1110
7
3
HUD_PPC_EU.book Seite 259 Sonntag, 13. Februar 2005 2:57 14
260 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
2
Rotate the green knob to remove any
misfed originals.
3
If the misfed original still remains, rotate
the green knob to the opposite direction
against the step 2. Then remove it.
4
Lift the green handle.
- Remove any misfed originals.
5
Rotate the green knob on your side in the
direction of the arrow and remove any
misfed originals.
HUD_PPC_EU.book Seite 260 Sonntag, 13. Februar 2005 2:57 14
261
12
6
Lift the original feeding tray and remove
any misfed originals.
7
Lower the original feeding tray, move the
green knob toward the front and open the
cover.
8
Remove any misfed paper.
9
Close the upper and lower cover.
2. Paper Misfeed in the Drawer Feeding Area
1
Open the cover.
HUD_PPC_EU.book Seite 261 Sonntag, 13. Februar 2005 2:57 14
262 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
2
Remove any misfed paper.
3
Close the cover.
3. Paper Misfeed in the Large Capacity Feeder (optional)
1
Open the cover.
2
Remove any misfed paper.
Paper Misfeed in the Paper Feed Pedestal (optional)
-Open the cover as shown on the right, and remove any misfed
paper.
3
Close the cover.
HUD_PPC_EU.book Seite 262 Sonntag, 13. Februar 2005 2:57 14
263
12
4. Paper Misfeed on the Bypass Feed Unit
1
Pull out misfed paper on the bypass tray.
5. Paper Misfeed in the Automatic Duplexer
1
Make sure that the bypass tray is opened,
and then open the automatic duplexer.
- Be careful not to let your fingers be caught between the
equipment and the automatic duplexer.
This could injure you.
- Do not touch the metal portion of a guide board as it could burn
you.
2
Lift the paper guide as indicated by the
arrow and remove any misfed paper.
3
Lower the paper guide and return the
automatic duplexer to the original
position.
- Be sure to close both sides of the Automatic Duplexer firmly.
HUD_PPC_EU.book Seite 263 Sonntag, 13. Februar 2005 2:57 14
264 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
6. Paper Misfeed in the Jam Releasing Unit
1
Make sure that the bypass tray and the
automatic duplexer are open, then open
the jam releasing unit cover.
2
Rotate the green knob as indicated by the
arrow toward the inside and remove any
misfed paper.
3
Return the jam releasing unit cover, the
automatic duplexer and the bypass tray to
the original positions.
- Be sure to close both sides of the automatic duplexer firmly.
7. Paper Misfeed in the Fuser Unit
1
Make sure that the bypass tray, the
automatic duplexer and the jam releasing
unit are open, and push down the 2 fuser
pressure release levers until they come to
a stop.
Be sure to perform step 1 without fail.
DO NOT touch the fuser unit and the metal area around it. Since
they are very hot, you could be burned or the shock could cause an
injury to your hand in the equipment.
HUD_PPC_EU.book Seite 264 Sonntag, 13. Februar 2005 2:57 14
265
12
2
Open the fuser unit cover.
3
Holding the knob (A), open the transport
guide.
4
Remove any misfed paper inside the fuser
unit.
5
Close the transport guide and the fuser
unit cover. Push up the fuser pressure
release lever to return the jam releasing
unit cover, the automatic duplexer and the
bypass tray to the original positions.
8. Paper Misfeed in the Offset Tray Unit or Job Separator Unit (Optional)
1
Make sure that the bypass tray and the
automatic duplexer are open, then open
the jam releasing unit cover.
DO NOT touch the fuser unit and the metal area around it. Since
they are very hot, you could be burned or the shock could cause an
injury to your hand in the equipment.
(A)
(A)
HUD_PPC_EU.book Seite 265 Sonntag, 13. Februar 2005 2:57 14
266 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
2
Open the fuser unit cover.
3
Open the offset tray cover or job
separator cover.
4
Remove any misfed paper inside the
offset tray unit or job separator unit.
5
Close the offset tray cover or job
separator cover. Close the fuser unit
cover and the jam releasing unit cover.
Return the automatic duplexer and
bypass tray to the original positions.
9. Paper Misfeed in the Relay Unit (optional)
1
Holding the cover handle of the relay unit,
open the cover.
HUD_PPC_EU.book Seite 266 Sonntag, 13. Februar 2005 2:57 14
267
12
2
Remove any misfed paper that is inside
the relay unit.
zRemove the misfed paper from the fuser unit side if it is easier.
3
Close the relay unit cover.
10. Paper Misfeed in the Hole Punch Unit (optional)
1
Open the front cover of the hole punch
unit (optional).
2
Raise the Hole Punch Unit.
3
Rotate the green knob to locate the arrow
within the area on the label.
- Under this condition, the punchers are up, allowing the paper
shown in the illustration to be removed.
- If the misfed paper still remains, open the upper cover of the
finisher to remove it.
4
Return the hole punch unit to the original
position and close the front cover.
HUD_PPC_EU.book Seite 267 Sonntag, 13. Februar 2005 2:57 14
268 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
11. Paper Misfeed in the Finisher (optional: MJ-1024/1023)
1
Open the upper cover of the finisher until
it locks.
- Remove any misfed paper.
2
Hold up the guide and remove any misfed
paper in the paper exit area.
3
Close the upper cover.
HUD_PPC_EU.book Seite 268 Sonntag, 13. Februar 2005 2:57 14
270 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
13. Paper Misfeed in the Saddle-stitch Finisher (optional: MJ-1024)
* Only when the saddle-stitch finisher (MJ-1024, optional) is installed
1
Open the front cover of the saddle-stitch
finisher.
2
Slide the green handle toward the right
and remove the misfed paper.
3
Press the lower portion of the green
handle.
HUD_PPC_EU.book Seite 270 Sonntag, 13. Februar 2005 2:57 14
271
12
4
Remove any misfed paper and return the
handle to its original position.
5
Turn the right-hand knob anticlockwise.
6
Pushing the left-hand knob, turn it
clockwise.
7
Remove any misfed paper on the exit side
of the saddle stitch unit.
HUD_PPC_EU.book Seite 271 Sonntag, 13. Februar 2005 2:57 14
272 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
8
Raise the lever and open the exit cover of
the saddle stitch unit.
- Remove any misfed paper.
9
Close the exit cover and the front cover.
HUD_PPC_EU.book Seite 272 Sonntag, 13. Februar 2005 2:57 14
273
12
6. ADDING STAPLES (OPTIONAL)
When the staple in the cartridge runs out, “Check staple cartridge” appears.
Add staples to the cartridge according to the procedure below.
Saddle-stitch Finisher (MJ-1024)/Multi-staple Finisher (MJ-1023)
1
Open the front cover of the finisher.
- When MJ-1024 is installed
- When MJ-1023 is installed
2
Take out the staple cartridge.
HUD_PPC_EU.book Seite 273 Sonntag, 13. Februar 2005 2:57 14
274 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
6.ADDING STAPLES (OPTIONAL) (Cont.)
12
3
Take out the empty staple case from the
staple cartridge.
4
Pull out the seal holding the staples.
- Be careful that the staples are not misaligned.
5
Push the new staple case into the staple
cartridge until it clicks.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Close the front cover of the finisher.
If “Check staple cartridge” remains, repeat the above procedure
from step 1 to 7.
HUD_PPC_EU.book Seite 274 Sonntag, 13. Februar 2005 2:57 14
275
12
Saddle-stitch Finisher (MJ-1024)
* Only when the saddle-stitch finisher (MJ-1024, optional) is installed
1
Open the front cover of the finisher.
2
Slide the saddle stitch unit carefully
toward the front.
3
Pull the handle of the saddle stitch holder
(1) toward you and turn it (2) 90º in the
direction of the arrow.
(1)
(2)
HUD_PPC_EU.book Seite 275 Sonntag, 13. Februar 2005 2:57 14
276 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
6.ADDING STAPLES (OPTIONAL) (Cont.)
12
4
Remove the empty staple case and
replace it with a new one.
- Replace both staple cases with new ones.
5
Return the saddle staple to its original
position.
- Pull the handle of the saddle stitch holder (1) toward you and turn
it (2) 90º in the direction of the arrow.
6
Return the saddle stitch unit to its original
position.
7
Make sure that A3, A4-R or B4 paper is
set.
- If any of the above paper sizes is not set, test stapling cannot be
performed.
8
Close the front cover of the finisher. Then,
test stapling is automatically performed
on a blank sheet.
- This is performed to avoid empty stitching.
If there is a test stapling failure and “Check staple cartridge”
remains, repeat the above procedure from step 1 to 8.
(1)
(2)
HUD_PPC_EU.book Seite 276 Sonntag, 13. Februar 2005 2:57 14
278 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
6.ADDING STAPLES (OPTIONAL) (Cont.)
12
5
Pull out the seal holding the staples
straight upward.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
If “Check staple cartridge” remains, repeat the above procedure
from step 1 to 6.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.
HUD_PPC_EU.book Seite 278 Sonntag, 13. Februar 2005 2:57 14
279
12
7. REMOVING JAMMED STAPLES (OPTIONAL)
If copies have not been stapled in the staple mode, “Examine stapler” appears.
This shows that the staples are jammed. Remove them as described below.
Saddle-stitch Finisher (MJ-1024)/Multi-staple Finisher (MJ-1023)
1
Open the front cover of the finisher.
- When MJ-1024 is installed
- When MJ-1023 is installed
2
Take out the staple cartridge.
HUD_PPC_EU.book Seite 279 Sonntag, 13. Februar 2005 2:57 14
280 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
12
3
Lower the staple cover while holding the
knob.
- A: stapler
Do not touch the stapling area. The stapler could injure you.
4
Remove any jammed staples.
5
Return the staple cover to its original
position while holding the knob.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Close the front cover of the finisher.
(A)
HUD_PPC_EU.book Seite 280 Sonntag, 13. Februar 2005 2:57 14
281
12
Saddle-stitch Finisher (MJ-1024)
* Only when the saddle-stitch finisher (MJ-1024, optional) is installed
1
Open the front cover of the finisher.
2
Slide the saddle stitch unit carefully
toward the front.
3
Pull the handle of the saddle stitch holder
(1) toward you and turn it (2) 90º in the
direction of arrow.
(1)
(2)
HUD_PPC_EU.book Seite 281 Sonntag, 13. Februar 2005 2:57 14
282 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
12
4
Remove the staple cases from the staple
cartridges.
5
While pushing down on the lever (1), pull
up the knob (2).
6
Remove any jammed staples, and then
return the knob (2) to its original position.
Do not touch the stapling area. The stapler could injure you.
7
Return the staple cases to their original
position.
(2)
(1)
(2)
HUD_PPC_EU.book Seite 282 Sonntag, 13. Februar 2005 2:57 14
283
12
8
Return the saddle staple to its original
position.
- Pull the handle of the saddle stitch holder (1) toward you and turn
it (2) 90º in the direction of the arrow.
9
Return the saddle stitch unit to its original
position.
10
Make sure that A3, A4-R or B4 paper is
set.
- If any of the above paper sizes is not set, test stapling cannot be
performed.
11
Close the front cover of the finisher. Then
test stapling is automatically performed
on a blank sheet.
- This is performed to avoid empty stitching.
If there is a test stapling failure and “Check staple cartridge”
remains, repeat the above procedure from step 1 to 11.
(1)
(2)
HUD_PPC_EU.book Seite 283 Sonntag, 13. Februar 2005 2:57 14
284 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
12
Single-staple Finisher (MJ-1022)
1
Pull the lever and move the finisher away
carefully from the equipment.
2
Take out the staple cartridge.
3
Lower the staple cover while holding the
knob.
- A: stapler
Do not touch the stapling area. The stapler could injure you.
4
Remove any jammed staples.
(A)
HUD_PPC_EU.book Seite 284 Sonntag, 13. Februar 2005 2:57 14
285
12
5
Return the staple cover to its original
position while holding the knob.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.
HUD_PPC_EU.book Seite 285 Sonntag, 13. Februar 2005 2:57 14
286 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
8.
DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)
When paper bits punched from copies have accumulated to a certain level, “READY (HOLE PUNCH DUST
BIN IS FULL)” appears. Dispose of the paper bits as described below.
1
Open the front cover of the hole punch
unit.
2
Pull out the black case, and then dispose
of the paper bits.
3
Return the case to its original position.
4
Close the front cover of the hole punch
unit.
HUD_PPC_EU.book Seite 286 Sonntag, 13. Februar 2005 2:57 14
12
288 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
HUD_PPC_EU.book Seite 288 Sonntag, 13. Februar 2005 2:57 14
289
13
13. MAINTENANCE
1. DAILY INSPECTION..........................................................................................................290
2. SIMPLE TROUBLESHOOTING.........................................................................................292
HUD_PPC_EU.book Seite 289 Sonntag, 13. Februar 2005 2:57 14
290 13.MAINTENANCE
13
1. DAILY INSPECTION
Items for Daily Check
Power ON/OFF status
We recommend that you turn the power switch ON at the startup everyday so as to use whenever needed.
Also, be sure to turn the power OFF ("Turning off the Power (Shutting down)" Page 30) when you leave
the office, except in the following cases:
- When the off-mode (or sleep mode) is set;
- When the weekly timer is in use;
- When the Fax (optional) is installed;
Weekly Maintenance
Cleaning the original glass, the original cover, the scanning area and the guide area.
To scan the original in good condition, we recommend that you clean the following items weekly.
(1) Scanning area
DO NOT use solvents such as alcohol. Clean the surface with a dried cloth or cloth moistened with
a small amount of water.
(2) Original glass
(3) Guide
(4) Original cover
Clean the surface with a cloth moistened with a small amount of water, alcohol or neutral detergent,
then wipe with a dry cloth over the surface.
- Be careful not to scratch the parts that you are cleaning.
DO NOT use such solvents as thinner or alcohol when cleaning the surface of the equipment.
-This could warp the shape of the surface or leave it discoloured.
-When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
(1)
(2)(3)(4)
HUD_PPC_EU.book Seite 290 Sonntag, 13. Februar 2005 2:57 14
291
13
Cleaning the Charger
If the inside of the charger and the wire become dirty, the dirt may appear on the copy.
* Before start cleaning, BE SURE TO TURN OFF THE POWER, then open the front cover.
To turn the power OFF, see "Turning off the Power (Shutting down)" Page 30.
1
Open the front cover.
2
Clean the charger.
- Hold the cleaning knob, pull it out slowly and fully to the front and
then push it back to the inside carefully and completely. Repeat
this 2 or 3 times.
Make sure that the charger knob is pushed in fully inside.
3
Close the front cover.
HUD_PPC_EU.book Seite 291 Sonntag, 13. Februar 2005 2:57 14
292 13.MAINTENANCE
13
2. SIMPLE TROUBLESHOOTING
Check the following items and, if the problem still occurs, call your service representative for assistance.
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get
an electric shock.
ALWAYS contact your service representative for maintenance or repair of the internal parts of the
equipment.
Equipment does not Start
Display does not Change when Buttons or Icons are Pressed
Item to be checked Countermeasure Reference page
Is the power cord plug securely
inserted in the outlet?
Insert the power cord plug until
it comes to a stop.
-
Is the front cover firmly closed? Close the cover properly. "1.DESCRIPTION OF EACH
COMPONENT" Page 20
Item to be checked Countermeasure Reference page
Is the copier in the energy
saving mode (Automatic
Energy Saving mode)?
Press the [ENERGY SAVER] or
[START] button on the control
panel to clear the mode.(It takes
a while for the copier to become
ready.)
"Control Panel" Page 23,
"3.SWITCHING TO THE ENERGY-
SAVING MODE" Page 33
Is the power ‘OFF’ because
the weekly timer is functioned?
Press the [START] button to
return the power ‘ON’.
See the [User Functions Guide].
Is the department code keyed
in?
Key in the correct department
code.
"Controlling the Use of the Copier with
Department Codes" Page 32
Is the “Warming up” message
displayed?
Wait until the copier becomes
ready.
"2.TURNING ON THE POWER
SWITCH" Page 30
HUD_PPC_EU.book Seite 292 Sonntag, 13. Februar 2005 2:57 14
293
13
Image Density is too Low
Image Density is too High
Items to be checked Countermeasure Reference page
Has the message “Install new
toner cartridge” appeared on
the screen?
Replace the toner cartridge. "3.REPLACE TONER CARTRIDGE
SYMBOL" Page 254
Is the image density or the
background adjustment set
lighter than is standard?
Use the manual density buttons
or the background adjustment
function to adjust the image
density properly.
"Manual Copy Density Mode"
Page 95, "1.BACKGROUND
ADJUSTMENT" Page 98
Items to be checked Countermeasure Reference page
Is the image density or the
background adjustment set
darker than standard?
Use the manual density buttons
or the background adjustment
function to adjust the image
density properly.
"Manual Copy Density Mode"
Page 95, "1.BACKGROUND
ADJUSTMENT" Page 98
HUD_PPC_EU.book Seite 293 Sonntag, 13. Februar 2005 2:57 14
294 13.MAINTENANCE
2.SIMPLE TROUBLESHOOTING (Cont.)
13
Images are Stained
Images are Blurred
Items to be checked Countermeasure Reference page
Is the original cover or the
optional reversing automatic
document feeder firmly
closed?
Close the cover or the feeder
properly to shut out any outer
light.
"When Placing an Original on the
Glass" Page 46
Are the original glass, the
original cover and the
scanning area dirty?
Clean them up. "Weekly Maintenance" Page 290
Is the image density set
properly?
Adjust the image density
properly with the [AUTO] button
or manual density buttons.
"6.COPY DENSITY ADJUSTMENT"
Page 95
Are 2-sided originals used? As the other side of the originals
can be seen, adjust the image
density properly (lighter) with
the background adjustment
function.
"1.BACKGROUND ADJUSTMENT"
Page 98
Are originals with high
transparency used?
Place a blank sheet of paper
with originals of the same size
or larger over the original.
"When Placing an Original on the
Glass" Page 46
Items to be checked Countermeasure Reference page
Does the entire originals lie
properly on the surface of the
glass?
Place the original on the glass
or the reversing automatic
document feeder and close the
original cover firmly.
-
Is the paper moist? Replace it with new paper. "2.ADD PAPER SYMBOL" Page
252
HUD_PPC_EU.book Seite 294 Sonntag, 13. Februar 2005 2:57 14
295
13
Images are Partially Missing
Functions cannot be Set
Item to be checked Countermeasure Reference page
Are the original size and
direction, as well as the
reproduction ratio suitable for
the paper size?
Select copy paper of the same
size as the original, or set the
reproduction ratio suitable for
the paper size.
"1.PAPER SELECTION" Page 66,
"2.REDUCTION AND
ENLARGEMENT COPYING"
Page 72
Is the margin on the copy set
properly?
Adjust the image shift value. "1.IMAGE SHIFT" Page 102
Item to be checked Countermeasure Reference page
Are there functions that cannot
be combined set together?
See the Copying Function
Combination and Image Quality
Adjustment Combination
Matrices and set again.
"4.COPYING FUNCTION
COMBINATION MATRIX" Page
310
HUD_PPC_EU.book Seite 295 Sonntag, 13. Februar 2005 2:57 14
13
296 13.MAINTENANCE
HUD_PPC_EU.book Seite 296 Sonntag, 13. Februar 2005 2:57 14
297
14
14. SPECIFICATIONS &
OPTIONS
1. e-STUDIO350/450 SPECIFICATIONS...............................................................................298
2. SPECIFICATIONS OF OPTIONS ......................................................................................301
3. PACKING LIST...................................................................................................................309
4. COPYING FUNCTION COMBINATION MATRIX ..............................................................310
Combination Matrix 1/2 ......................................................................................................310
Combination Matrix 2/2 ...................................................................................................... 311
HUD_PPC_EU.book Seite 297 Sonntag, 13. Februar 2005 2:57 14
298 14.SPECIFICATIONS & OPTIONS
14
1. e-STUDIO350/450 SPECIFICATIONS
Model Name DP-3520/4520
Type Desktop type
Original Glass Fixed
Printing (Copying) System Indirect electrophotographic method
Developing System 2-component magnetic brush developing
Fixing Method Induction heating
Photosensor Type OPC
Original Scanning System Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Original Scanning Sensor Linear CCD sensor
Scanning Light Source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing 2,400 dpi x 600 dpi (Smoothing process)
Acceptable Originals Sheets, books and 3-dimensional objects
Acceptable Original Size Max. A3
Acceptable
Copy Paper
Size
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13” LG, 8.5” SQ, 8K, 16K, 16K-R
Bypass Paper size within 100-297 mm (Length), 148-432 mm (Width)
Acceptable
Copy Paper
Weight
Drawer 64-105 g/m2
Bypass 64-209 g/m2 (for continuous feed)
50-209 g/m2 (for single feed)
64-105 g/m2 (When the reversing automatic document feeder is used.)
Warm-up Time Approx. 20 seconds
First Copy Time Approx. 3.9 seconds
Continuous Copy Speed See “Continuous Copying Speed”.
Multiple Copying Up to 999 copies (digital key entry)
Excluded
Image Width
Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Reproduction Ratio Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)
HUD_PPC_EU.book Seite 298 Sonntag, 13. Februar 2005 2:57 14
299
14
Paper
Supply
Drawer 550 sheets (80 g/m2)
Bypass 100 sheets (80 g/m2)
Toner Density Adjustment Magnetic auto-toner system
Exposure Control Automatic plus manual selection from 11 exposure step
Environment
(for normal use)
Temperature: 10-30ºC, Humidity: 20-85% (No Condensation)
Power Requirements 220-240 V ±10%, 8 A (50/60 Hz)
110-127 V ±10%, 12 A (50/60 Hz) (for Saudi Arabia 100V version only)
Power Consumption At least 1.6 kW (including optional equipments)
At least 1.5 kW (including optional equipments) (for Saudi Arabia 100V
version only)
Dimensions
(equipment only)
660 mm (W) x 718 mm (D) x 739 mm (H)
Weight Approx. 83 kg (equipment including developer and drum)
Space Occupied
(equipment only)
1,028 mm (W) x 819 mm (D)
Storage Capacity Max. 1,000 sheets or until the memory is full (Toshiba’s own chart)
HUD_PPC_EU.book Seite 299 Sonntag, 13. Februar 2005 2:57 14
300 14.SPECIFICATIONS & OPTIONS
1.e-STUDIO350/450 SPECIFICATIONS (Cont.)
14
* The bypass copying speed is measured with the paper size specified.
* This specification varies depending on copying condition and environment.
* The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject
to change without notice in the interest of product improvement.
Continuous Copying Speed Unit: sheets/min.
Paper Type Paper size Feeder e-STUDIO350 e-STUDIO450
Plain Paper A4, B5, LT Drawer 35 45
Bypass 35 40
A4-R, A5-R, B5-R, LT-R, ST-R Drawer 25 28
Bypass 25 28
B4, FOLIO, LG, COMP Drawer 21 24
Bypass 21 24
A3, LD Drawer 18 21
Bypass 18 21
Thick 1 A4, B5, LT Drawer 30 30
Bypass 30 30
A4-R, A5-R, B5-R, LT-R, ST-R Drawer 23 23
Bypass 23 23
B4, FOLIO, LG, COMP Drawer 19 19
Bypass 19 19
A3, LD Drawer 16 16
Bypass 16 16
Thick 2 A4, B5, LT Bypass 25 25
A4-R, A5-R, B5-R, LT-R, ST-R Bypass 18 18
B4, FOLIO, LG, COMP Bypass 15 15
A3, LD Bypass 13 13
Thick 3 A4, B5, LT Bypass 20 20
A4-R, A5-R, B5-R, LT-R, ST-R Bypass 14 14
B4, FOLIO, LG, COMP Bypass 11 11
A3, LD Bypass 10 10
HUD_PPC_EU.book Seite 300 Sonntag, 13. Februar 2005 2:57 14
301
14
2. SPECIFICATIONS OF OPTIONS
Reversing Automatic Document Feeder
Model Name MR-3015
Copy Sides 1-side, Duplex
Number of Originals (A4) 100 originals (50-80 g/m2)
Feeding Speed 105-420 mm/s
Acceptable Originals A3 - A5-R, LD - ST-R (A5 and ST are not acceptable)
Paper Weight 50-127 g/m2 (1-sided original), 50-105 g/m2 (2-sided original)
Power Source Power supplied from the equipment
Dimensions 557 mm (W) x 530 mm (D) x 165 mm (H)
Weight Approx.15 kg
Power Consumption 43.6 W max.
Large Capacity Feeder
Model Name KD-1012
Acceptable Paper Size A4
Paper Weight 64-105 g/m2
Maximum Capacity 2,500 sheets (80 g/m2) (Height: approx. 137 mm x 2)
Power Source 5 V, 24 V (supplied from the equipment)
Dimensions 623 mm (W) x 657 mm (D) x 307.5 mm (H) (incl. Stabilizer)
Weight Approx. 27 kg
Power Consumption 50 W max.
Paper Feed Pedestal (1 drawer type)
Model Name KD-1011
Acceptable Paper Size A3 - A5-R, LD - ST-R, 8K, 16K, 16K-R
(A5, ST and non-standard size are not acceptable)
Paper Weight 64-105 g/m2
Maximum Capacity 550 sheets (80 g/m2)
Dimensions 623 mm (W) x 657 mm (D) x 320 mm (H)
Weight Approx. 21.5 kg
HUD_PPC_EU.book Seite 301 Sonntag, 13. Februar 2005 2:57 14
302 14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
Additional Drawer Module
Model Name MY-1021
Acceptable Paper Size A3 - A5-R, LD - ST-R, 8K, 16K, 16K-R
(A5, ST and non-standard size are not acceptable)
Paper Weight 64-105 g/m2
Maximum Capacity 550 sheets (80 g/m2)
Dimensions 526 mm (W) x 569.5 mm (D) x 107 mm (H)
Weight Approx. 3.8 kg
Saddle-stitch Finisher (MJ-1024)
Model Name MJ-1024
Type Floor type (Console type)
Acceptable Paper Size A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Acceptable Paper Weight 60-256 g/m2
Number of Copies Stapled at
a time
(Including 2 covers
(200-256 g/m2))
Paper Size 60-80 g/m281-90 g/m291-105 g/m2
A4, A5-R, B5, LT, ST-R 50 sheets 30 sheets 30 sheets
A3, A4-R, B4, B5-R,
FOLIO, LD, LG, LT-R,
COMP
30 sheets 15 sheets 15 sheets
Stapling Position Front, Rear, Double
Stitching Capacity
(Including 2 covers
(200-256 g/m2))
Paper Size 60-80 g/m281-90 g/m291-105 g/m2
A3, A4-R, B4, LD, LT-R 15 sheets 10 sheets 10 sheets
Power Source Supplied from the equipment
Dimensions 649 mm (W) x 657 mm (D) x 1,086 mm (H)
Weight Approx. 70 kg
Power Consumption 170 W max.
HUD_PPC_EU.book Seite 302 Sonntag, 13. Februar 2005 2:57 14
303
14
Tray Loading Capacity: (See "Available Conditions for Saddle Stitch" Page 85)
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
Sort/Group/Staple is not available with A5-R, ST-R, B5-R.
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
(MJ-1024 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
A4, A5-R, B5, LT,
ST-R,
147
(1,000)
147
(1,000)
147
(1,000)
147
(1,000)
147
(1,000 sheets or 30
sets) *1
*1.The value reached earlier by using condition
147
(1,000 sheets or 30
sets) *1
A3, A4-R, B4, B5-
R, FOLIO, LD, LG,
LT-R, COMP
73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500 sheets or 30
sets) *1
73.5
(500 sheets or 30
sets) *1
(MJ-1024 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
LD and LT 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500 sheets or 30
sets) *1
*1.The value reached earlier by using condition
73.5
(500 sheets or 30
sets) *1
LG and LT-R 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
A4-R and FOLIO 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
A3 and A4 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
B4 and B5 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
HUD_PPC_EU.book Seite 303 Sonntag, 13. Februar 2005 2:57 14
304 14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
Tray Loading Capacity:
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
Sort/Group/Staple is not available with A5-R, ST-R, B5-R.
Multi-staple Finisher (MJ-1023)
Model Name MJ-1023
Type Floor type (Console type)
Acceptable Paper Size A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Acceptable Paper Weight 60-256 g/m2
Number of Copies Stapled at
a time
(Including 2 covers
(200-256 g/m2))
Paper Size 60-80 g/m281-90 g/m291-105 g/m2
A4, A5-R, B5, LT, ST-R 50 sheets 30 sheets 30 sheets
A3, A4-R, B4, B5-R,
FOLIO, LD, LG, LT-R,
COMP
30 sheets 15 sheets 15 sheets
Stapling Position Front, Rear, Double
Power Source Supplied from the equipment
Dimensions 536 mm (W) x 657 mm (D) x 1,086 mm (H)
Weight Approx. 39 kg
Power Consumption 70 W max.
(MJ-1023 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 12121 2
A4, A5-R, B5, LT,
ST-R
147
(1,000)
147
(1,000)
147
(1,000)
147
(1,000)
147
(1,000 sheets or 30
sets) *1
*1.The value reached earlier by using condition
147
(1,000 sheets or 30
sets) *1
A3, A4-R, B4, B5-
R, FOLIO, LD,
LG, LT-R, COMP
73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500 sheets or 30
sets) *1
73.5
(500 sheets or 30 sets)
*1
HUD_PPC_EU.book Seite 304 Sonntag, 13. Februar 2005 2:57 14
305
14
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
(MJ-1023 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
LD and LT 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
Whichever 73.5 mm,
500 sheets or 50 sets
is reached first. *1
*1.The value reached earlier by using condition
Whichever 73.5 mm,
500 sheets or 50 sets
is reached first. *1
LG and LT-R 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
A4-R and FOLIO 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
A3 and A4 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
B4 and B5 73.5
(500)
73.5
(500)
73.5
(500)
73.5
(500)
HUD_PPC_EU.book Seite 305 Sonntag, 13. Februar 2005 2:57 14
306 14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
Tray Loading Capacity:
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
Single-staple Finisher (MJ-1022)
Model Name MJ-1022
Type Hanging-type
Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, A5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Acceptable Paper Weight 50-209 g/m2
Number of Copies Stapled at
a time
Acceptable weight for staple:
64-80 g/m2
A4, A4-R, B5, LT, LT-R 30 sheets
B4, LG 20 sheets
A3, FOLIO, LD, COMP 15 sheets
Stapling Position Rear
Power Source Supplied from the copier
Dimensions 451 mm (W) x 539 mm (D) x 590 mm (H)
Weight Approx. 17 kg
Power Consumption 40 W max.
(MJ-1022 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
ST-R, A5-R,
B5-R
30
(200)
99
(700)
-- - -
LT, LT-R,
A4, A4-R, B5
30
(200)
99
(700)
30
(200)
99
(700)
170 sheets or 30 sets
*1
*1.The value reached earlier by using condition
600 sheets or 50 sets
*1
B4, LG 20
(140)
70
(490)
20
(140)
70
(490)
110 sheets or 30 sets
*1
400 sheets or 50 sets
*1
A3, FOLIO, LD,
COMP
15
(100)
49
(350)
15
(100)
49
(350)
80 sheets or 30 sets
*1
300 sheets or 50 sets
*1
HUD_PPC_EU.book Seite 306 Sonntag, 13. Februar 2005 2:57 14
307
14
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m2 sheets.
(MJ-1022 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 12121 2
Combination of
different width
paper
15
(100)
49
(350)
-- - -
LD and LT 15
(100)
49
(350)
15
(100)
49
(350)
80 sheets or 15 sets
*1
*1.The value reached earlier by using condition
300 sheets or 15 sets
*1
LG and LT-R 15
(100)
49
(350)
15
(100)
49
(350)
110 sheets or 15 sets
*1
400 sheets or 15 sets
*1
A3 and A4 15
(100)
49
(350)
15
(100)
49
(350)
80 sheets or 15 sets
*1
300 sheets or 15 sets
*1
B4 and B5 15
(100)
49
(350)
15
(100)
49
(350)
110 sheets or 15 sets
*1
400 sheets or 15 sets
*1
Bridge Unit
Model Name KN-3520
Dimensions 417 mm (W) x 395 mm (D) x 154 mm (H) (incl. cover)
Weight Approx. 4 kg
Job Separator
Model Name MJ-5004
Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, A5-R, FOLIO
Acceptable Paper Weight Upper stacker: 64-105 g/m2
Lower stacker: 50-209 g/m2
Loading Capacity Upper stacker: 25 mm (150 sheets)
Lower stacker: 40 mm (250 sheets) *1
*1.Values in parentheses is the number of 80 g/m2 sheets.
Power Source Supplied from the multifunctional digital systems
Dimensions 498 mm (W) x 415 mm (D) x 153 mm (H)
Weight Approx. 3.3 kg
HUD_PPC_EU.book Seite 307 Sonntag, 13. Februar 2005 2:57 14
308 14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
* The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject
to change without notice in the interest of product improvement.
Offset Tray
Model Name MJ-5005
Acceptable Paper Size A3, A4, A4-R, B4, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable Paper Weight 50-209 g/m2
Loading Capacity 39 mm (250 sheets) *1
*1.Values in parentheses is the number of 80 g/m2 sheets.
Shift Amount Approx. 30 mm
Power Source Supplied from the multifunctional digital systems
Dimensions 500 mm (W) x 415 mm (D) x 169 mm (H)
Weight Approx. 3.5 kg
Hole Punch Unit
Model Name MJ-6004
Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable Paper Weight 60-256 g/m2 (OHP film and specially treated paper are not available)
Dimensions 112 mm (W) x 617 mm (D) x 378 mm (H)
Weight Approx. 9 kg
Number of punch holes and hole
diameter Available paper sizes
Japan and most of Europe
MJ-6004E
2 holes (6.5 mm dia.) A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LT, LT-R, LD, LG, COMP
France
MJ-6004F
4 holes
(6.5 mm dia.; 80 mm pitch)
A3, A4, LD, LT
Sweden
MJ-6004S
4 holes
(6.5 mm dia.; 70,21 mm pitch)
A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LD, LG, LT, LT-R, COMP
HUD_PPC_EU.book Seite 308 Sonntag, 13. Februar 2005 2:57 14
309
14
3. PACKING LIST
Packing List Photoconductive Drum
Operator’s Manual Pocket
Unpacking Instructions
Operator’s Manual
Setup Report
Customer satisfaction card
CD (4 pcs.)
Toner Bag
PM Sticker
HUD_PPC_EU.book Seite 309 Sonntag, 13. Februar 2005 2:57 14
310 14.SPECIFICATIONS & OPTIONS
14
4. COPYING FUNCTION COMBINATION MATRIX
Combination Matrix 1/2
*1 *1 *1 *1 YES YES YES YES *1 *1 YES *1 YES -- YES YES YES
*1 *1 *1 *1 YES YES YES YES YES YES YES *1 YES -- (YES) YES YES
*1 *1 *1 *1 YES YES YES YES NO NO YES *1 YES -- YES YES YES
*1 *1 *1 *1 YES YES YES YES YES YES YES YES YES -- YES YES YES
*1 *1 *1 *1 YES YES YES (YES) NO NO YES *1 NO -- NO YES --
YES YES YES YES YES *1 *1 *1 *1 *1 YES *1 *1 -- YES YES YES
YES YES YES YES YES *1 *1 *1 *1 *1 YES *1 *1 -- YES YES YES
YES YES YES YES YES *1 *1 *1 *1 *1 YES *1 *1 -- YES YES YES
YES YES YES YES YES *1 *1 *1 *1 *1 YES *1 *1 -- (YES) YES YES
NO YES NO YES NO *1
*1 *1 *1 *1 NO *1 *1 -- NO YES YES
NO YES NO YES NO NO *1 *1 *1 *1 NO *1 *1 -- NO YES YES
YES YES YES YES YES YES YES YES YES NO NO NO NO -- (YES) YES YES
NO NO NO YES NO *1 *1 *1 *1 *1 *1 NO *1 -- NO YES YES
YES YES YES YES NO *1 *1 *1 *1 *1 *1 NO *1 -- YES YES YES
-- -- -- -- -- -- -- -- -- YES YES YES YES YES YES YES YES
YES (YES) YES YES NO YES YES YES (YES) NO NO (YES) NO NO -- YES YES
YES YES YES YES -- YES YES YES YES YES YES YES YES YES -- YES *1
YES YES YES YES -- YES YES YES YES YES YES YES YES YES -- YES *1
YES YES YES YES YES YES YES YES YES YES YES YES YES YES -- YES YES YES
*1 *1 *1 YES NO YES YES YES YES NO NO YES NO YES -- YES YES YES
YES YES YES YES YES YES YES YES YES YES YES YES YES YES -- NO YES YES
YES YES YES YES YES YES YES YES YES NO NO YES NO YES -- NO YES YES
YES YES YES YES NO YES YES YES YES NO NO YES NO YES -- NO YES YES
YES YES NO NO NO YES YES YES YES NO NO NO NO YES -- NO YES --
YES YES YES YES NO YES YES YES YES NO NO YES NO NO -- NO YES YES
YES YES NO NO NO YES YES YES YES NO NO YES NO NO -- NO YES --
YES YES YES YES NO YES YES YES YES NO NO YES NO YES -- NO YES YES
YES YES YES YES NO YES YES YES YES NO NO YES NO YES -- NO YES YES
YES YES YES YES NO NO YES NO YES YES YES YES YES NO -- YES*2 YES YES
YES YES YES YES NO NO YES NO YES YES YES YES YES NO -- YES*2 YES YES
YES YES YES YES NO NO YES NO YES NO NO YES NO NO -- YES*2 YES YES
YES YES YES YES NO NO YES NO YES NO NO YES NO NO -- YES*2 YES YES
YES YES YES YES NO NO YES NO YES NO NO YES NO NO -- YES*2 YES YES
YES YES YES YES YES YES YES YES YES YES YES YES NO YES -- NO YES YES
YES YES YES YES YES YES YES YES YES YES YES YES NO YES -- NO YES YES
*5 *5 *5 *5 NO *3 *3 *3 *3 NO NO *3 *3 *3 -- *3 YES YES
YES: The functions can be combined. *1: The function set last takes precedence.
NO: The function set first takes precedence. *2: Only AMS (Automatic Magnification Selection).
(YES): The result is not guaranteed although the function are operable. *3: Bookbinding margin setting in the image shift functions cannot be combined with the dual page setting.
*4: The setting cannot be changed from 2nd job or later.
*5: The type of original (1-sided or 2-sided) can be changed.
Job build
Book - Tablet
Next setting
Page number
Edge erase
Magazine sort & Saddle stitch
Top copied
Book centre erase
XY zoom
Already setting
Image direction
ADF
Book to 2
Non-sort/Non-staple
Sort
SADF
Staple sort
Magazine sort
Dual page
2IN1/4IN1
Cover
sheet
Top blank
Trim/Mask
Mirror
Both blank
Date stamp
Top copied back blank
Sheet insertion
Group
Mixed original sizes
Hole punch
Saddle stitch
Rotate copier (A4,B5,A5,LT)
Rotate sort
Image shift
1 to 1 Simplex
1 to 2 Duplex
2 to 1 Split
2 to 2 Duplex
Rotate
copier
(A4,B5,
A5,LT)
Hole
punch
Saddle
stitch ADFBook to 2
Non-sort/
Non-
staple
Sort SADF
Rotate
sort
Mixed
original
sizes
Group Staple
sort
Magazine
sort
Magazine
sort &
Saddle
stitch
1 to 1
Simplex
1 to 2
Duplex
2 to 1
Split
2 to 2
Duplex
HUD_PPC_EU.book Seite 310 Sonntag, 13. Februar 2005 2:57 14
311
14
Combination Matrix 2/2
YES *1 YES YES *1 YES YES *1 YES YES YES YES YES YES YES YES YES *5
YES *1 YES YES *1 YES YES *1 YES YES YES YES YES YES YES YES YES *5
YES *1 YES YES *1 NO YES NO YES YES YES YES YES YES YES YES YES *5
YES YES YES YES *1 NO YES NO YES YES YES YES YES YES YES YES YES *5
YES NO YES YES NO NO NO NO NO NO NO NO NO NO NO YES YES NO
YES YES YES YES YES YES YES YES YES YES *1 *1 *1 *1 *1 YES YES *3
YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES *3
YES YES YES YES YES YES YES YES YES YES NO NO NO NO NO YES YES *3
YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES *3
YES NO YES NO NO NO NO NO NO NO YES YES NO NO NO YES YES NO
YES NO YES NO NO NO NO NO NO NO YES YES NO NO NO YES YES NO
YES YES YES YES YES NO YES YES YES YES YES YES YES YES YES YES YES *3
YES NO YES NO NO NO NO NO NO NO YES YES NO NO NO NO NO *3
YES YES YES YES YES YES NO NO YES YES NO NO NO NO NO YES YES *3
YES YES YES *1 YES *1 *1 YES YES YES YES YES YES YES YES YES YES --
YES YES NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO *3
YES YES YES YES YES -- YES -- YES YES YES YES YES YES YES YES YES YES
YES YES YES YES YES -- YES -- YES YES YES YES YES YES YES YES YES YES
YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES *4
YES YES NO NO NO YES NO YES YES YES YES YES YES YES NO NO *4
YES YES YES YES NO YES YES NO NO YES YES YES YES YES YES YES YES
YES NO YES YES YES YES YES*3 YES YES YES YES YES YES YES YES YES *4
YES NO YES YES NO NO NO NO NO NO NO NO NO NO YES YES NO
YES NO NO YES NO YES NO YES NO NO NO NO NO NO YES YES *4
YES YES YES YES NO YES NO NO NO YES YES YES YES YES YES YES NO
YES NO YES YES*3 NO NO NO NO NO NO NO NO NO NO YES YES YES
YES YES NO YES NO YES NO NO -- YES YES YES YES YES YES YES NO
YES YES NO YES NO NO NO NO -- YES YES YES YES YES YES YES NO
YES YES YES YES NO NO YES NO YES YES -- -- -- YES YES YES NO
YES YES YES YES NO NO YES NO YES YES -- -- -- YES YES YES NO
YES YES YES YES NO NO YES NO YES YES -- -- -- YES YES YES NO
YES YES YES YES NO NO YES NO YES YES -- -- -- YES YES YES NO
YES YES YES YES NO NO YES NO YES YES YES YES YES YES YES YES NO
YES NO YES YES YES YES YES YES YES YES YES YES YES YES YES YES *4
YES NO YES YES YES YES YES YES YES YES YES YES YES YES YES YES *4
*4 *4 YES *4 *4 *4 NO YES NO NO NO NO NO NO NO *4 *4
YES: The functions can be combined. *1: The function set last takes precedence.
NO: The function set first takes precedence. *2: Only AMS (Automatic Magnification Selection).
(YES): The result is not guaranteed although the function are operable. *3: Bookbinding margin setting in the image shift functions cannot be combined with the dual page setting.
*4: The setting cannot be changed from 2nd job or later.
*5: The type of original (1-sided or 2-sided) can be changed.
Job
build
Job build
Already setting
Image direction
ADF
Book to 2
Non-sort/Non-staple
Sort
Group
Staple sort
Magazine sort
Magazine sort & Saddle stitch
Top copied
Book centre erase
XY zoom
Dual page
Book - Tablet
Both blank
Page number
SADF
Edge erase
Date stamp
Top copied back blank
Sheet insertion
Mixed original sizes
Image shift
2IN1/4IN1
Cover
sheet
Top blank
Trim/Mask
Mirror
Hole punch
Saddle stitch
Rotate copier (A4,B5,A5,LT)
Rotate sort
1 to 1 Simplex
1 to 2 Duplex
2 to 1 Split
2 to 2 Duplex
Sheet
insertion
Image
shift
Date
stamp
Dual
page
Book
centre
erase
XY zoom
2IN1/
4IN1
Top
copied
back
blank
Trim/
Mask
Next setting
Image
direction
Book -
Tablet
Page
number
Mirror
Edge
erase Both
blank
Cover sheet
Top blank Top
copied
HUD_PPC_EU.book Seite 311 Sonntag, 13. Februar 2005 2:57 14
312 14.SPECIFICATIONS & OPTIONS
4.COPYING FUNCTION COMBINATION MATRIX (Cont.)
14
HUD_PPC_EU.book Seite 312 Sonntag, 13. Februar 2005 2:57 14
313
INDEX
INDEX
Numerics
1-Sided Originals to 1-Sided Copies
(default setting) ................................................. 89
1-Sided Originals to 2-Sided Copies ................. 89
2 IN 1/4 IN 1 .................................................... 109
2-Sided Originals to 1-Sided Copies ................. 91
2-Sided Originals to 2-Sided Copies ................. 90
A
Acceptable Copy Paper Types and Sizes ......... 36
Acceptable Original Types and Sizes ............... 45
Acceptable Original Types and Sizes/Maximum
Number of Sheets that can be Stored ............... 45
Acceptable paper size ....................................... 92
ACCESS button ................................................ 24
ADD PAPER SYMBOL ................................... 252
Adding a blank cover .......................................118
Adding a copied cover .....................................118
Adding Paper to the Drawers .......................... 252
Adding Paper to the Large Capacity Feeder ... 253
ADDING STAPLES (OPTIONAL) .................... 273
Saddle-stitch Finisher (MJ-1024) .............. 275
Saddle-stitch Finisher (MJ-1024)/
Multi-staple Finisher (MJ-1023) ................. 273
Address Book Entry ........................................ 166
ADDRESS REGISTRATION FROM LOG
LISTS .............................................................. 197
Admin Password ....................234, 235, 240, 245
Advanced Function ......................................... 176
Advice ................................................................. 8
Auto Exposure .................................................. 51
Auto Job Start .......................................30, 54, 55
AUTO JOB START (JOB PRESET) .................. 54
Automatic Copy Density Modes ........................ 95
Automatic duplexer ........................................... 20
Automatic Function Clear ............................24, 29
Automatic Magnification Selection (AMS) ......... 72
Automatic paper selection ................................. 51
Automatic Paper Selection (APS) ..................... 66
Available Conditions for Saddle Stitch .............. 85
Available paper size .......................................... 87
Available paper sizes for the hole punch .......... 86
B
BACKGROUND ADJUSTMENT ....................... 98
basic screen ............................................... 24, 27
BLINKING GRAPHIC SYMBOLS ....................250
BOOK CENTRE ERASE .................................106
Bookbinding margin .........................................103
Booklet mode .....................................................83
Book-type Originals ...........................................47
Book-type Originals to 2-Sided Copies ..............92
BYPASS COPYING ...........................................58
Bypass Copying on Non-Standard-Size
Paper .................................................................61
Bypass Copying on Standard Size Paper .........58
bypass feeding .............................12, 58, 84, 111
BYPASS MISFEED ..........................................250
Bypass tray ........................................................20
C
CALL SERVICE SYMBOL ...............................251
Call Service Symbol ........................................287
CALL SERVICE SYMBOL/PERIODIC
MAINTENANCE MESSAGE ............................287
Caution ................................................................8
CHANGING INPUT DATA ...................... 218, 240
Changing the Data of Template .......................240
Changing the Data of User Group ...................242
Changing the Paper Size of the Drawer ............38
Changing the Paper Size of the Drawer/
Setting the Drawer for Special Uses ..................38
CHECK ORIGINALS .......................................250
Cleaning the Charger ......................................291
CLEAR button ....................................................24
CLEAR PAPER SYMBOL ................................259
Clearing the Drawer for Special Uses ...............44
Clearing the Functions Selected ........................29
Coloured paper ................................. 42, 118, 121
Confirming and Canceling Auto Job Start .........55
Confirming the Destinations ............................174
CONFIRMING THE STATUS OF FAX/
INTERNET FAX JOB .......................................192
CONFIRMING THE STATUS OF SCAN ..........193
Continuous Copying Speed .............................300
Continuous Feed Mode ............................ 49, 132
Continuous original feed mode ..........................51
CONTINUOUS/SINGLE ORIGINAL
FEEDING .........................................................132
Control Panel .............................................. 20, 23
HUD_PPC_EU.book Seite 313 Sonntag, 13. Februar 2005 2:57 14
314
INDEX
INDEX (Cont.)
Controlling the Use of the Copier with
Department Codes ............................................ 32
COPY & FILE .................................................. 139
COPY button ..................................................... 23
COPY DENSITY ADJUSTMENT ...................... 95
Copy paper .................................................36, 42
Copying function combination ......................... 295
Copying Procedure ........................................... 51
Cost Advantage .................................................. 7
COVER COPYING ...........................................118
Cover sheet copying ......................................... 56
Creating a Bookbinding Margin ....................... 103
Creating a Right or Left Margin ....................... 102
Currently selected drawer size .......................... 27
D
DAILY INSPECTION ....................................... 290
DATA OVERWRITE KIT (OPTIONAL) .............. 34
Date and time .................................................... 27
default setting ..............................................23, 24
Deleting a Job .........................................183, 187
Deleting a Job from the List ............................ 191
Deleting a Private Print ................................... 189
Deleting a User Group .................................... 247
DELETING BOX ............................................. 220
DELETING DOCUMENT ................................ 223
DELETING FOLDER ...................................... 221
DELETING TEMPLATE .................................. 245
department code ............................................... 32
Dependability ...................................................... 7
DESCRIPTION OF EACH COMPONENT ........ 20
DESCRIPTION OF THE BLINKING GRAPHIC
SYMBOLS ....................................................... 250
DIGITAL KEYS .................................................. 24
Direct Entry ..................................................... 165
DIRECTION OF COPY IMAGES IN “1 TO 2”
AND “2 TO 1” .................................................. 129
DIRECTION OF DUPLEX COPY IMAGES IN
“2 TO 2” ........................................................... 131
DISCLAIMER NOTICE ..................................... 17
DISPOSING OF THE PUNCHED PAPER BITS
(OPTIONAL) ................................................... 286
drawer feeding .......................................... 84, 111
Drawer for cover sheet ......................42, 119, 120
Drawer for sheet insertion ................................. 42
Drawer for special sheets. .................................42
DRAWER MISFEED ........................................250
Drawers .............................................................20
DUAL-PAGE ....................................................107
Dual-page ..........................................................58
DUPLEX COPYING ...........................................88
DUPLEXER MISFEED ....................................250
During Maintenance or Inspection .....................15
E
EDGE ERASE .................................................105
Edge erase ........................................................58
Edge Erase Copying ........................................105
e-FILING ..........................................................213
e-FILING button .................................................23
e-FILING FUNCTIONS ....................................214
ENERGY SAVER button .....................24, 33, 292
Enlargement copying ................................ 72, 109
Entering Letters ...............................................142
Environmental Harmony ......................................7
Equipment does not Start ................................292
ERROR lamp .....................................................24
e-STUDIO 350/450 SPECIFICATIONS ...........298
Execute Test Printing .......................................226
Exit cover .........................................................272
EXTENSION button ...........................................23
F
FAX button .........................................................23
Features of the e-STUDIO350/450 ......................9
Feeder ...................................................... 36, 300
Finisher (optional MJ-1022) .............................269
Finisher (optional MJ-1024/1023) ....................268
FINISHER/HOLE PUNCH UNIT MISFEED .....251
Finishing Modes and Finishers (Optional) .........76
For Making 1-sided, 2-sided and Book-type
Copying .............................................................88
Front cover ................................................. 20, 77
FUNCTION CLEAR button ................................24
Function setting area .........................................27
Functions cannot be set ..................................295
FUSER MISFEED ...........................................250
Fuser Unit ........................................................264
HUD_PPC_EU.book Seite 314 Sonntag, 13. Februar 2005 2:57 14
315
INDEX
G
General ............................................................... 7
GENERAL COPYING PROCEDURES ............. 51
GENERAL PRECAUTIONS .............................. 10
Group copying ................................................... 79
Group Entry ..................................................... 167
H
Handling and Storing Paper .............................. 37
HELP button ...................................................... 23
High Productivity ................................................. 7
Hole Punch Mode (Optional) ............................. 86
Hole punch unit (sold separately) ..................... 77
HOW TO MAKE COPIES .................................. 35
I
Image Density is too High ............................... 293
Image Density is too Low ................................ 293
IMAGE EDITING ..............................................113
IMAGE SHIFT ................................................. 102
Image shift ........................................58, 234, 236
Images are Blurred ......................................... 294
Images are partially missing ........................... 295
Images are Stained ......................................... 294
In the Continuous Feed Mode ........................... 49
Initial (default) Settings ..................................... 51
Inner tray ........................................................... 20
INSERT 1 .......................................................... 44
INSERT 2 .......................................................... 44
INSERT SOURCE 2 ....................................... 122
Inside the Single-feed Mode ............................. 50
INTERNET FAX ......................................159, 160
Internet Fax Transmission Overview ............... 160
INTERRUPT button ....................................24, 56
INTERRUPT COPYING .................................... 56
Items for Daily Check ...................................... 290
J
JAM RELEASING UNIT MISFEED ................. 250
JOB BUILD ..................................................... 126
JOB STATUS ..........................................181, 182
JOB STATUS button .............................24, 53, 55
L
Large Capacity Feeder ................................... 262
LOG LIST ........................................................194
M
Machine Balance .................................................7
MAGAZINE SORT ........................................... 111
Magazine Sort ...........................................83, 111
MAGAZINE SORT & SADDLE STITCH
button .......................................................... 83, 84
Magazine Sort & Saddle Stitch Mode (Booklet
Mode) ................................................................83
Main Components .............................................20
MAINTENANCE ..............................................289
Manual Copy Density Mode ..............................95
Manual Paper Selection ....................................68
Masking ...........................................................113
Maximum capacity for saddle stitch ...................85
Maximum number of sheets that can
be set ................................................39, 252, 253
Maximum Number of Sheets that can be
Stapled ..............................................................82
Maximum Number of Sheets that can be
Stored ................................................................45
Maximum sheet capacity ...................................36
Message Display ...............................................27
Mirror Image ....................................................115
MJ-1022 with mixed paper loaded ...................307
MJ-1022 with mixed paper not loaded .............306
MJ-1023 with mixed paper loaded ...................305
MJ-1023 with mixed paper not loaded .............304
MJ-1024 with mixed paper loaded ...................303
MJ-1024 with mixed paper not loaded .............303
MONITOR/PAUSE button ..................................24
Moving a Print Job ...........................................185
Multi-address Transmission .............................173
Multi-staple Finisher (MJ-1023) .......................304
N
Negative/Positive Reversal ..............................116
NOTICE TO USERS ............................................5
Number of punch holes and hole
diameter .................................................... 87, 308
O
Operator’s Manual Pocket ........................ 20, 309
Optimum image Quality .......................................7
Optional .............................................................20
HUD_PPC_EU.book Seite 315 Sonntag, 13. Februar 2005 2:57 14
316
INDEX
INDEX (Cont.)
Optional Equipment .......................................... 21
OPTIONAL FEEDER MISFEED ..................... 250
ORIGINAL MODE ............................................. 94
Original scale .................................................... 20
P
PACKING LIST ............................................... 309
PAGE NUMBERING ....................................... 124
Paper Misfeed
in the Automatic Duplexer ......................... 263
in the Drawer Feeding Area ...................... 261
in the Finisher (optional MJ-1024/1023) .... 268
in the Fuser Unit ........................................ 264
in the Hole Punch Unit (optional) ............... 267
in the Jam Releasing Unit ......................... 264
in the Large Capacity Feeder (optional) .... 262
in the Offset Tray Unit or Job Separator
Unit (Optional) ........................................... 265
in the Relay Unit (optional) ........................ 266
in the Reversing Automatic Document
Feeder (optional) ....................................... 259
in the Saddle-stitch Finisher
(optional MJ-1024) .................................... 270
in the Single-staple Finisher
(optional MJ-1022) .................................... 269
on the Bypass Feed Unit ........................... 263
PAPER SELECTION ......................................... 66
Paper Size ........................................................ 36
paper with a watermark ..................................... 42
Pause/Resume ............................................... 184
Performing the Proof Print .............................. 186
PERIODIC MAINTENANCE MESSAGE ......... 287
Periodic Maintenance Message ...................... 287
Photoconductive Drum .................................... 309
Power switch ..................................................... 20
Precaution for Internet Transmission .............. 160
Precautions for Using the Reversing
Automatic Document Feeder ............................ 48
PREFACE ........................................................... 8
PRINT DATA/MEMORY RX/
FAX communication .......................................... 24
PRINT JOB LIST ............................................. 183
Print the whole document ............................... 225
PRINTING SEND/RECEIVE LOG LIST
OF FAX ........................................................... 199
PRINTING STORED DOCUMENT ................. 225
Printing the Stored Document with Added/
Changed Settings ............................................227
Priority Transmission .......................................177
Private Print .....................................................188
PRIVATE PRINT JOB ......................................188
PROOF PRINT JOB ........................................186
R
RECALLING TEMPLATE .................................231
Receiving from POP3 Server ..........................180
Receiving from SMTP Server ..........................180
RECEIVING INTERNET FAX ..........................179
Receiving Modes .............................................179
Recommendation for original toner .................255
REDUCTION AND ENLARGEMENT
COPYING ..........................................................72
REGISTERING TEMPLATE ............................234
Registering the template in the Public
Template Group ...............................................234
Registering the template in the User Group ....236
RELAY UNIT MISFEED ...................................250
Remaining paper level .......................................27
REMOVING JAMMED STAPLES
Saddle-stitch Finisher (MJ-1024) ...............281
Saddle-stitch Finisher (MJ-1024)/
Multi-staple Finisher (MJ-1023) .................279
Single-staple Finisher (MJ-1022) ...............284
REMOVING JAMMED STAPLES
(OPTIONAL) ....................................................279
REPLACE TONER BAG SYMBOL ......... 251, 258
REPLACE TONER CARTRIDGE ....................251
REPLACE TONER CARTRIDGE SYMBOL ....254
Replacing the Toner Cartridge .........................255
Reproduction ratio ...................................... 27, 51
Rotate Sort Mode ..............................................80
S
SADDLE STITCHING UNIT MISFEED ...........251
Saddle-stitch Finisher (MJ-1024) .....................302
Saddle-stitch Finisher (MJ-1024)/
Multi-staple Finisher (MJ-1023) .......................273
SCAN button ............................................. 23, 231
SCAN SETTING IN THE TOUCH PANEL .......144
SCAN TO e-FILING .........................................146
SCAN TO E-MAIL ............................................154
SCAN TO FILE ................................................150
HUD_PPC_EU.book Seite 316 Sonntag, 13. Februar 2005 2:57 14
317
INDEX
Scanning Procedure ....................................... 144
SCANNING THE IMAGES .............................. 143
Searching Address Using LDAP Server ......... 172
Searching by Address ..................................... 170
Searching by ID Number ................................. 169
SELECTING FINISHING MODES .................... 76
Sending 2-sided Originals ............................... 176
SENDING INTERNET FAX ............................. 162
Service and Support Benefits ............................. 7
SETTING COPY PAPER .................................. 36
Setting Magazine Sort & Saddle Stitch Mode ... 83
SETTING OF BASIC COPY MODES ............... 65
SETTING ORIGINALS ...................................... 45
Setting Staple Sort Mode .................................. 81
Setting the Drawer for Special Uses ...........38, 42
Setting the Transmission Conditions ............... 162
SETTING UP BOX .......................................... 216
Setup Report ................................................... 309
SHARPNESS ADJUSTMENT ........................... 99
SHEET INSERTION MODE ............................ 121
Sheet Originals ................................................. 46
SIMPLE TROUBLESHOOTING ...................... 292
Single-feed Mode ......................................50, 133
Single-staple Finisher (MJ-1022) ............277, 306
Sort copying ...................................................... 79
Sort/Group Copying .......................................... 79
SPECIFICATIONS & OPTIONS ...................... 297
SPECIFICATIONS OF OPTIONS ................... 301
Specifying Both Original Size and Copy Size ... 73
Specifying the Recipients ................................ 165
Stable Image Quality ........................................... 7
Staple Sort ........................................................ 81
Staple Sorting ................................................... 81
START button .................................................... 24
STATUS .......................................................... 200
Sticker labels ...........................................9, 36, 58
STOP button ..................................................... 24
STOPPING THE COPY OPERATION .............. 57
STORE TO E-FILING ...................................... 136
Storing a Non-Standard Size in the MEMORY .62
STORING ORIGINALS ................................... 135
Supplies/Parts ..................................................... 7
SWITCHING TO THE ENERGY-SAVING
MODE ............................................................... 33
T
TEMPLATE ............................................. 229, 230
TEMPLATE button ............................23, 232, 234
TEXT/PHOTO mode ..........................................51
The recommended paper ..................................37
Thick 1 ......................................... 36, 37, 43, 300
Thick 2 ........................................................ 36, 37
Thick 3 ........................................................ 36, 37
TIME & DATE STAMP .....................................123
Tip ........................................................................8
To Restore the Invalid Code (print error)
to the Normal Print ...........................................190
Toner ............................................................. 7, 20
TOP COPIED button ................................119, 120
TOSHIBA QUALITY IS SECOND TO NONE ......6
Toshiba-recommended paper/
Handling and Storing Paper ..............................37
Total copy quantity .............................................27
TOUCH PANEL ....................................20, 24, 27
Touch panel contrast adjustment volume ..........20
Touch-buttons ....................................................27
Tray load capacity ....................................... 82, 85
Trays ..................................................................77
Trimming ..........................................................113
Trimming/Masking ...........................................113
TURNING ON THE POWER SWITCH ..............30
Types of originals ...............................................45
U
Unpacking Instructions ....................................309
Upper cover .......................................................77
Used toner bag ..................................................20
User Friendly .......................................................7
USER FUNCTIONS button ................................23
USING THE EDITING FUNCTIONS ...............101
Using the Reduction/Enlargement Zoom
Buttons or One-touch Zoom Buttons .................74
W
Warning ...............................................................8
Weekly Maintenance .......................................290
When Coming Across the Situations below .......53
When handling supplies ....................................16
When Installing or Moving .................................10
When Placing an Original on the Glass .............46
HUD_PPC_EU.book Seite 317 Sonntag, 13. Februar 2005 2:57 14
318
INDEX
INDEX (Cont.)
When recalling Template in the Public
Group .............................................................. 231
When recalling Template in the User
Group .............................................................. 232
WHEN THE GRAPHIC SYMBOLS BLINK ON
THE TOUCH PANEL ....................................... 249
WHEN USING THE DEPARTMENT CODES .190
When Using the Multifunctional Digital
Systems ............................................................ 13
When Using the Reversing Automatic
Document Feeder ............................................. 48
X
X-Y ZOOM .......................................................117
HUD_PPC_EU.book Seite 318 Sonntag, 13. Februar 2005 2:57 14
CARL-SCHURZ-STRASSE 7 · D-41460 NEUSS
TEL. +49(0)2131-12450, FAX +49(0)2131-1245402
WWW.TOSHIBA-EUROPE.COM/TEC
TOSHIBA TEC GERMANY
IMAGING SYSTEMS GMBH
Version 3.0
319


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 450 in the language / languages: English as an attachment in your email.

The manual is 11.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 450

Toshiba e-STUDIO 450 User Manual - German - 416 pages

Toshiba e-STUDIO 450 User Manual - Dutch - 311 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info