When an Error Remains After Removing
Jammed Paper
Remove any remaining jammed paper using the following
procedure.
1
Hold the Document holder lever and lift the
Document holder.
2
Push the top cover open button to open the
top cover.
Note
• If the inner finisher is installed, be sure to remove any
output paper on it before opening the top cover.
3
Remove the four image drum cartridges,
and place them on a flat surface.
4
Cover the drum cartridges with paper to
prevent direct exposure to light.
Note
• The image drum (the green tube) is fragile; handle it
carefully.
• Do not expose the drum cartridges to direct sunlight or
strong light (more than about 1,500 lux). Do not expose
them to room lighting for more than five minutes.
5
Remove the jammed paper slowly.
• When the End of the Paper Is Visible
• When the End of the Paper is Not Visible
• When the Back End of the Paper is Visible