Manual Toshiba e-STUDIO 403S (page 160 of 183) (English)

481935

160

Zoom out

Zoom in

1/183

Other Issues

-160-

zThe paper often jams.

zMultiple sheets are fed

at once.

zThe paper is fed at an

angle.

The machine is inclined.

Place the machine on a flat surface.

The paper is too light or too heavy. Use the appropriate paper for the

machine.

P. 3 3

The paper is moist or has a static

charge.

Use paper stored under proper

temperature and humidity

conditions.

P. 3 5

The paper is wrinkled, folded or

curled.

Use appropriate paper for the machine.

Fix the re-flexed paper.

P. 3 3

Something is already printed on

the back side of the paper.

You cannot use paper that has been

printed on for tray 1 and tray 2.

Load it in the MP tray or Manual

Feeder for printing.

P. 3 8

The edges of the paper are not

kept even.

Fan the paper and even up the

edges.

P. 3 6

There is only one sheet of paper in

the tray.

Load several sheets of paper. P. 3 6

You have added new paper onto

the paper already loaded in the

tray.

Remove the already loaded paper,

stack it onto the new paper, even

up the edges and load the paper

with the old paper on top.

P. 3 6

The paper is loaded at an angle. For tray 1 and tray 2, adjust the

paper width guide and stopper to

the paper.

For the MP tray or Manual Feeder,

adjust the paper width guide to the

paper.

P. 3 6

Envelopes are not correctly loaded. Load envelopes correctly. P. 3 8

Paper, envelopes or labels whose

weight is between 123 and 163 g/m

(33 and 43 lb) is loaded on the tray 1

and tray 2.

Load the paper, envelopes or labels

whose weight is between

23 and

63 g/m2 (33 and 43 lb) in the MP

tray (e-STUDIO403S) or Manual

Feeder (e-STUDIO332S).

P. 3 8

P. 4 1

Paper does not feed into

the machine.

The setting of [Paper Feeding

Source] on the printer driver is

not correctly specified.

Check the paper tray and select

the correct tray in [Paper

Feeding Source] on the printer

driver.

You have specified manual feeding

on the printer driver.

Load the paper in the MP tray.

Then, on the operator panel, select

[Restart].

Or, on the printer driver, clear the

[

Use MP tray as manual feed

]

check box on [

Paper feed options

P. 3 8

Advanced

The machine does not

start processing even

though you have

removed the jammed

paper.

- Open and close the top cover. -

The paper gets folded or

wrinkled.

The paper is moist or has a static

charge.

Use paper stored under proper

temperature and humidity

conditions.

P. 3 5

The paper is light.

Press the <

SETTING

> key and then

select [

Paper Setup

] > [

(tray

name)

] > [

Media Weight

Then, specify a lighter weight.

P. 4 0

The paper twists around

the rollers in the fuser

unit.

The settings of media weight and

type are incorrect.

Press the <SETTING> key and

then select [Paper Setup] >

[(tray name)] > [Media Type]/

[Media Weight]. Then, specify

the appropriate values.

Or, specify the heavier weight in

[Media Weight].

P. 4 0

The paper is light. Use heavier paper. -

There is an image or text on the

leading edge of the paper.

Have a margin on the leading edge

of the paper.

For duplex printing, leave a margin

on the leading and bottom edges.

Symptom Point to check Remedy Reference

hello, i bought toshipa estudio 403s used in good condition but i can not access the webpage as admin, also i can not scan from network, i installed every drivers and applications i found on internet but with no luck. please Help Submitted on 4-3-2021 at 16:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 403S in the language / languages: English as an attachment in your email.

The manual is 22.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 403S

Toshiba e-STUDIO 403S User Manual - German - 206 pages

Toshiba e-STUDIO 403S User Manual - German - 202 pages

Toshiba e-STUDIO 403S User Manual - German - 137 pages

Toshiba e-STUDIO 403S User Manual - Dutch - 198 pages

Toshiba e-STUDIO 403S Quick start guide - Dutch - 131 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba e-STUDIO 403S Manual

Product: