Manual Toshiba e-STUDIO 403S (page 109 of 183) (English)

481935

109

Zoom out

Zoom in

1/183

Scanning Methods

-109-

Scanning

7Press the to select [Select An

Application] and then press .

8Press the to select where to send the

scanned document and then press .

9Press or .

Memo

zIf you select [Application], the specified application starts

and the scanned image is displayed on the application.

zIf you select [Folder], the scanned image is saved in the

specified folder.

If you select [

PC-FAX

], the application for fax transmission

starts. After sending the scanned image, send your fax with

the fax transmission software on your computer.

WSD Scan connection

1Press the <SCAN> key on the Operation

Panel.

2Place the original on the automatic

document feeder or on the scanner glass.

3Press the to select [Local PC] and

then press .

4Check that the [Select A Connecting

PC] is selected, and press .

5Press the to select [From WSD Scan]

and then press .

6Press the to select the destination PC

and then press .

7Press the to select [Duplex Scan]

and then press .

8Press the or to select [ON] or

[OFF] and then press .

9Press or .

Memo

To start the dual-sided scan, turn its setting On and place

the original on the automatic document feeder. If you turn

the dual-sided scan On but place the document on the

scanner glass, you cannot scan the dual sides of document.

When using the scanner application on PC, it will be

scanned by the scanner type of scan profile setup on PC,

regardless of where the document is set or the setting of

[

Duplex Scan

Scan to Remote PC

This function launches the Scanner driver from a

utility installed on a PC (ActKey, PaperPort,

Image, Adobe Photoshop CS3, etc.) and starts

scanning.

Connect the machine to a computer via USB or a

network.

For PC Scan function, there are three modes;

simple scan mode, secure scan mode and WSD

scan. In simple mode, the scanning can only be

started from all computers via USB and Network.

In secure scan mode, the scanning can only be

started from the already registered computers in

the machine via USB and Network. In WSD Scan,

the scanning can be started from only the

already registered computers in the machine via

Network. Only a computer can be connected at

the same time.

Memo

zFor the following procedure, ActKey will be used as an

example for Windows, and Adobe Photoshop CS3 for Mac

OS X. The items in this manual may differ depending on

the application you are using.

Note

zConnect the machine to a computer via USB or a network.

zInstall an application (ActKey, PaperPort, etc.) and a

scanner driver before starting a scan job. This installation

is NOT required for WSD Scan connection.

zIf you connect the machine to network, follow these

instructions.

-Set [TCP/IP] setting to [Enable].

- Conform the IP version of the machine to that of your

computer.

- Set up the DNS server.

- Enable the network TWAIN setting.

zWhen in Secure Scan Mode, the administrator needs to

scans from the control panel or the web site beforehand.

zFor Mac OS X, when carrying out a network scan for the

first time, you need to set the connection target when

using a driver. When you use the driver for the first time,

the connection target selection tool will launch.

You do not need to set the connection target after the first

time.

zTo operate the MFP in the WSD Scan connection, set the

followings.

-Set the [TCP/IP] setting of the MFP to [Enable].

- Match the IP version between the MFP and the PC.

- Enable the WSD Scan.

- Install the MFP on the PC.

Reference

zFor details on how to install a scanner driver, refer to

"Installing Scanner Drivers (TWAIN/WIA/ICA Driver)" P.

100.

MONO COLO

hello, i bought toshipa estudio 403s used in good condition but i can not access the webpage as admin, also i can not scan from network, i installed every drivers and applications i found on internet but with no luck. please Help Submitted on 4-3-2021 at 16:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 403S in the language / languages: English as an attachment in your email.

The manual is 22.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 403S

Toshiba e-STUDIO 403S User Manual - German - 206 pages

Toshiba e-STUDIO 403S User Manual - German - 202 pages

Toshiba e-STUDIO 403S User Manual - German - 137 pages

Toshiba e-STUDIO 403S User Manual - Dutch - 198 pages

Toshiba e-STUDIO 403S Quick start guide - Dutch - 131 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba e-STUDIO 403S Manual

Product: