481928
71
Zoom out
Zoom in
Previous page
1/90
Next page
6
Options
69
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-1250)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
2nd Line for FAX Unit (GD-1260)
This unit enables you to add a line to the Fax, making a 2nd line
available.
Installed inside of the equipment.
The FAX Unit (optional, GD-1250) is required.
Printer Kit (GM-1230, GM-1240)
This kit enables the printing function.
Install the GM-1230 in the e-STUDIO256/306, e-STUDIO256SE/
306SE and the GM-1240 in the e-STUDIO356/456, e-
STUDIO356SE/456SE.
Printer/Scanner Kit (GM-2250, GM-2260)
This kit enables the printing and scanning functions.
Install the GM-2250 in the e-STUDIO256/306, e-STUDIO256SE/
306SE and the GM-2260 in the e-STUDIO356/456, e-
STUDIO356SE/456SE.
Scanner Kit (GM-4230, GM-4240)
This kit enables the scanning function.
Install the GM-4230 in the e-STUDIO256/306, e-STUDIO256SE/
306SE and the GM-4240 in the e-STUDIO356/456, e-
STUDIO356SE/456SE.
Desk (MH-2520)
This is a desk for the equipment.
Accessible Arm (KK-2550)
This enables a user in a wheelchair to close the Reversing
Automatic Document Feeder (MR-3021, MR-3022) while
remaining seated.
& P.70 “How to use the Accessible Arm in this manual
Operator’s Manual Pocket (KK-1660)
Keep the manual in this pocket.
Wireless LAN Module (GN-1060)
This module enables the equipment to be used in a wireless LAN
environment.
Installed inside of the equipment.
The Antenna (optional, GN-3010) is required.
The equipment cannot be connected to the wireless and wired
LAN at the same time.
Bluetooth Module (GN-2020)
This module enables you to perform Bluetooth printing.
Installed inside of the equipment.
The Antenna (optional, GN-3010) is required.
Antenna (GN-3010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
Installed on the right-hand side of the equipment.
This cannot be installed with the Work Table at the same time.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, faxing, Internet Fax or network Fax
is performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-1020)
This enables the EWB function in this equipment.
Unicode Font Enabler (GS-1007)
This enables printing from the SAP environment using Unicode
font with this equipment.
13. Hole Punch Unit (MJ-6008)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (MJ-1033) to use it.
14. Hole Punch Unit (MJ-6007)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (MJ-1032) to use it.
15. Hole Punch Unit (MJ-6103)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (MJ-1101) or Saddle Stitch Finisher
(MJ-1106) to use it.
Depending on the model, options have been already installed and the functions can be used.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 356SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 356SE in the language / languages: English as an attachment in your email.

The manual is 32.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 356SE

Toshiba e-STUDIO 356SE User Manual - Dutch - 184 pages

Toshiba e-STUDIO 356SE Quick start guide - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info