481905
37
Zoom out
Zoom in
Previous page
1/418
Next page
Description of Each Component 35
8. Saddle Stitch Finisher (MJ-1030)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. The
Hole Punch Unit (optional, MJ-6004) can be installed to this finisher. The Bridge Unit
(optional, KN-3500) is required for the installation of this finisher.
9. Hole Punch Unit (MJ-6101)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1101).
10. Hole Punch Unit (MJ-6004)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1030).
Other options available are as follows. Contact your service technician or Toshiba product dis-
tributors for details.
Work Table (KK-3511)
This is a small table for placing originals while the equipment is operated.
yInstalled on the right-hand side of the equipment
FAX Unit (GD-1210)
This is a unit for using the equipment as a Fax.
yInstalled inside of the equipment
2nd Line for Fax Unit (GD-1160)
This unit enables to add a line to the Fax to make it 2nd line.
yInstalled inside of the equipment
yThe Fax Unit (GD-1210) is necessary.
Desk (MH-1700)
This is a desk for the equipment.
Data Overwrite Kit (GP-1060)
This is a kit to erase the data stored temporarily when copying, printing, scanning, Fax, internet
Fax or network Fax is performed. It overwrites temporarily stored data with random data.
yInstalled inside of the equipment
512 MB Expansion Memory (GC-1250)
This is the main memory which is used for programs of the equipment and operations. This
memory enables the B4, A3 and FOLIO (LD, LG, 13" LG, COMP) size originals to be scanned
with the slim PDF format.
yInstalled inside of the equipment
256 MB Expansion Memory (GC-1260)
This is the page memory and is used for temporarily storing data during scanning or printing.
This memory enables scanning in the full colour, auto colour and image smoothing mode with
600 dpi.
yInstalled inside of the equipment
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
yInstalled inside of the equipment
yThe Antenna (GN-3010) is necessary.
yThe equipment cannot be connected to the wireless and wired LAN at the same time.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 3500c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 3500c in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 3500c

Toshiba e-STUDIO 3500c User Manual - German - 395 pages

Toshiba e-STUDIO 3500c Quick start guide - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info