681666
62
Zoom out
Zoom in
Previous page
1/78
Next page
Replacing Consumables / Maintenance Units
- 62 -
2
1
3
4
5
6
7
6
Close the top cover.
7
Return the document holder to its original
position.
Memo
If you dispose of the used fuser unit yourself, be sure to
place it in a plastic bag and follow local regulations for
proper disposal.
Replacing the Belt Unit
Recommendation for Replacing the Belt Unit
When the belt unit nears the end of its lifespan, the message
[Time to Replace Belt] will appear on the touch panel to notify
you that it is time to prepare a new belt unit. You can continue
printing until the message [Replace Belt] appears, then printing
will stop.
The belt unit is recommended to be replaced after about
60,000 prints on A4-sized paper (single-sided printing).
However, this page yield is for common printing conditions (3
pages at a time). Printing one page at a time can reduce the
belt life by half.
Memo
After the message [Time to Replace Belt] appears, you can
continue to print before the message [Replace Belt]
appears.
Note
Even after the message [Replace Belt] appears, you may
still be able to print by opening and closing the top cover.
However, we recommend replacing the belt unit as soon as
possible.
Replace the belt unit
1
Press the [ON/OFF] button until a "pip"
sound is heard. "Shutdown is in progress."
appears for a while, and then the power is
turned OFF.
Note
Do not turn off the device abruptly. It can cause
malfunctions.
2
Hold the Document holder lever and lift the
Document holder.
3
Push the top cover open button to open the
top cover.
Top cover
Document holder
Document
holder
Document
holder lever
There is a risk of getting burned.
Do not touch the fuser unit. It can be extremely hot.
Caution
Downloaded from www.Manualslib.com manuals search engine
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 347cs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 347cs in the language / languages: English as an attachment in your email.

The manual is 14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 347cs

Toshiba e-STUDIO 347cs User Manual - German - 100 pages

Toshiba e-STUDIO 347cs User Manual - Dutch - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info