804513
28
Zoom out
Zoom in
Previous page
1/196
Next page
1
2
3
4
5
6
7
8
9
10
11
12
2-2 HOW TO MAKE COPIES
3Select the copy modes ( in the illustration on the page
on the right).
- Use the colour mode selection key, the touch panel and the
digital keys.
- Any copy modes cannot be changed after the START key
is pressed (including the case when originals are divided into
multiple sets when fed).
- Selecting multiple copy modes may be restricted depending
on their combination. Page 11-11, 11-12
Initial (default) settings
4Press the START key ( in the illustration on the page
on the right).
- When the reversing automatic document feeder is used and
the continuous feed mode is selected ( Page 6-2), copying
begins.
1. GENERAL COPYING PROCEDURES
After setting (confirming) paper in the cassettes, place the originals. When the START key is pressed
with any settings unchanged, copies are made in the initial (default) settings (*1). You can make copies
as desired by setting different copy modes.
Full-colour mode
Reproduction ratio ........... 100%
Copy quantity ................. 1
Automatic paper selection
1-sided
copies from
1-sided
originals
Manual image density
Text/photo mode (original image type)
Sheet bypass ........ plain paper
Non-sort Non-staple mode
Continuous original feed mode (*2)
The initial (default) settings of the copier at the time of installa-
tion are as shown on the right.
*1 The copy modes that are automatically set when the power
is turned on, when the energy-saving mode is cleared or
when the FUNCTION CLEAR key is pressed on the
control panel are called the initial (default) settings.
*2 This is displayed when the reversing automatic document
feeder (optional) is installed.
2Place the originals.
- Acceptable originals Page 2-9
- When placing an original on the glass Page 2-10
- When using the reversing automatic document feeder (op-
tional) Page 2-11
Copying Procedure
1Place paper in the cassette(s).
- Acceptable copy paper Page 2-4
When the desired paper is not set in any of the cassettes or the
large-capacity feeder (optional):
- Setting the cassette Page 2-6
- Bypass copying Page 6-5
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 310C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 310C in the language / languages: English as an attachment in your email.

The manual is 4.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info