481882
17
Zoom out
Zoom in
Previous page
1/80
Next page
1
2
3
4
5
Description of Each Component
15
13. Hole Punch Unit (MJ-6005)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (optional, MJ-1025)
to use it.
14. Hole Punch Unit (MJ-6101)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (optional, MJ-1101) to use it.
15. Hole Punch Unit (MJ-6004)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (optional, MJ-1024)
to use it.
Other options available are as follows. Contact your service technician or Toshiba product distributors for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-1250)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment
2nd Line for FAX Unit (GD-1260)
This unit enables you to add a line to the Fax, making a 2nd line
available.
Installed inside of the equipment
The FAX Unit (optional, GD-1250) is required.
Printer Kit (GM-1150, GM-1160)
This kit enables the printing function.
Install the GM-1150 in the e-STUDIO255/305 and the GM-1160
in the e-STUDIO355/455.
Printer/Scanner Kit (GM-2150, GM-2160)
This kit enables the printing and scanning functions.
Install the GM-2150 in the e-STUDIO255/305 and the GM-2160
in the e-STUDIO355/455.
Scanner Kit (GM-4150, GM-4160)
This kit enables the scanning function.
Install the GM-4150 in the e-STUDIO255/305 and the GM-4160
in the e-STUDIO355/455.
Desk (MH-2520)
This is a desk for the equipment.
Accessible Arm (KK-2550)
This enables a user in a wheelchair to close the Reversing
Automatic Document Feeder (MR-3021, MR-3022) while
remaining seated.
& P
.18 “How to use the Accessible Arm
Operator’s Manual Pocket (KK-1660)
Keep the manual in this pocket.
Wireless LAN Module (GN-1050)
This module enables the equipment to be used in a wireless LAN
environment.
Installed inside of the equipment
The Antenna (optional, GN-3010) is required.
The equipment cannot be connected to the wireless and wired
LAN at the same time.
Bluetooth Module (GN-2010)
This module enables you to perform Bluetooth printing.
Installed inside of the equipment
The Antenna (optional, GN-3010) is required.
Antenna (GN-3010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
You can login and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
Installed on the right-hand side of the equipment.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, Fax, Internet Fax or network Fax is
performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-1020)
This enables the EWB function in this equipment.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-studio 305 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-studio 305 in the language / languages: English as an attachment in your email.

The manual is 5.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-studio 305

Toshiba e-studio 305 Quick start guide - German - 80 pages

Toshiba e-studio 305 User Manual - Dutch - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info