681665
17
Zoom out
Zoom in
Previous page
1/78
Next page
TROUBLESHOOTING FOR THE HARDWARE
- 17 -
2
1
3
4
5
6
7
Messages Displayed on the Touch Panel
A message appears on the upper part of the screen to notify users of a problem, etc. The major examples of problems and how to
solve them are described in the table below.
Message Problem Description Corrective Action
Close *** cover. The cover indicated by *** is open. Check the cover on the touch panel and close it.
Misfeed in *** Paper misfeed has occurred inside
the equipment.
Remove the misfed paper following the guidance displayed on the
touch panel.
P.5 "When a Paper Jam Occurs"
Install new *** toner cartridge No toner is left. “***” indicates the
color.
(The colors are shown abbreviated
when two or more toners are running
out: Y: yellow, M: magenta, C: cyan,
and K: black)
See the color indication on the touch panel and replace the toner
cartridge.
(About another 50 copies can be made after this message
appears. The number varies depending on the conditions of
copying.)
P.55 "Replace the Toner Cartridges"
*** TONER NOT RECOGNIZED
Check the toner cartridge
The toner cartridge indicated by *** is
not installed at all or improperly so.
Install the toner cartridge correctly.
P.55 "Replace the Toner Cartridges"
The terminal of the toner cartridge is
stained.
Wipe the terminal with a soft cloth.
The recommended toner cartridge is
not being used.
Use the recommended toner cartridge.
P.55 "Replace the Toner Cartridges"
Check paper size setting on touch
panel for drawer N. Check the
direction or size of the paper.
Paper misfeed has occurred because
of the mismatch between the paper
size placed in drawer N and the size
registered for the drawer N in the
equipment.
Just removing the misfed paper does not prevent another paper
from being misfed. Be sure to correctly register the paper size in
the equipment.
Wait (Performing Self-check) The equipment is undergoing
maintenance to keep its imaging
quality.
Wait until the adjustment is completed and the message
disappears.
Time for cleaning. Open the front
cover and follow the guidance.
The LED print head need cleaning. Clean the LED print head.
Check the original and set it again The original is misfed inside of the
Reversing Automatic Document
Feeder.
Remove the misfed original following the guidance on the touch
panel.
P.12 "When a Document is Jammed"
The direction or the size of the
original placed on the Reversing
Automatic Document Feeder is
incorrect.
Check the direction and the size of the original and then replace it
on the Reversing Automatic Document Feeder. Then reattempt the
operation.
Change direction of original The orientation of the original placed
on the original glass is incorrect.
Change the orientation of the original by 90 degrees and place it on
the original glass.
Cannot print this paper size
Select the other drawer.
Printing was attempted but failed. The
paper could not be output on the tray
selected for the paper output because
of a mismatch between the paper size
and the tray.
Delete the failed print job, select the appropriate tray for the paper,
and perform printing again.
Cannot print this paper type
Set the other paper type
Printing was attempted but failed.
The paper could not be output in the
tray selected because of a mismatch
between the paper type and the tray.
Delete the failed print job, select the appropriate tray for the paper,
and perform printing again.
Change from this mode
Count over, cannot store anymore
The number of originals to be
scanned has exceeded the limit
specified with the department or user
code during scanning.
Ask your administrator for details of setting the limit for the number
of copies.
READY(*** TONER NOT
RECOGNIZED)
The toner cartridge indicated by *** is
not installed at all or improperly so.
Install the toner cartridge correctly.
P.55 "Replace the Toner Cartridges"
The recommended toner cartridge is
not being used.
Use the recommended toner cartridge.
P.55 "Replace the Toner Cartridges"
READY (CHECK STAPLER) Staple jam has occurred in the stapler
of the finisher.
Remove the jammed staples.
READY (CHECK STAPLER) No staples are left in the stapler of the
finisher.
Refill the staples.
Downloaded from www.Manualslib.com manuals search engine
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 287cs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 287cs in the language / languages: English as an attachment in your email.

The manual is 14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 287cs

Toshiba e-STUDIO 287cs User Manual - German - 100 pages

Toshiba e-STUDIO 287cs User Manual - Dutch - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info