681673
28
Zoom out
Zoom in
Previous page
1/354
Next page
26 1.BEFORE USING EQUIPMENT
1.Description of Each Component (Cont.)
1
8. Slot Cover
This cover is used when the 2nd Drawer is not installed.
9. Saddle Stitch Finisher (MJ-1025)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. (The Hole Punch
Unit sold separately can be installed to this finisher.) The Bridge Unit (KN-3520 sold separately) is
required when installing this finisher.
10. Hanging Finisher (MJ-1022)
This finisher enables sort/group finishing and stapling. The Bridge Unit (KN-3520 sold separately) is
required when installing this finisher.
11. Hole Punch Unit (MJ-6005)
This unit enables you to punch holes on printouts. It can be installed to the Saddle Stitch Finisher (MJ-
1025).
12. Automatic Duplexer
Enables duplex copying.
The Automatic Duplexer may be optional.
Other options available are as follows. Contact your service technician or Toshiba product distributors for
details. (Options may vary depending on destination.)
Work Table (KK-3511)
This is a small table for placing originals while the equipment is operated.
Cannot be installed with e-BRIDGE ID Gate at the same time.
FAX Unit (GD-1150)
This is a unit for using the equipment as a Fax.
Installed inside of the equipment
2nd Line for Fax Unit (GD-1160)
This unit enables to add a line to the Fax to make it 2nd line.
Installed inside of the equipment
The Fax Unit (GD-1150) is necessary.
Desk (MH-1700)
This is a desk for the equipment.
Data Overwrite Kit (GP-1060)
This is a kit to erase the data stored temporarily when copying, printing, scanning, Fax, internet Fax or net-
work Fax is performed. It overwrites temporarily stored data with random data.
Installed inside of the equipment
Scrambler Board (GP-1040)
This board enhances the security of the equipment. Data are encrypted when they are written into the hard
disk of the equipment, and decrypted when they are read.
Installed inside of the equipment
The PCI Slot (GO-1060) is necessary.
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
Installed inside of the equipment
The Antenna (GN-3010) is necessary.
The equipment cannot be connected to the wireless and wired LAN at the same time.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 283 in the language / languages: English as an attachment in your email.

The manual is 15.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 283

Toshiba e-STUDIO 283 User Manual - English - 214 pages

Toshiba e-STUDIO 283 User Manual - German - 390 pages

Toshiba e-STUDIO 283 User Manual - German - 358 pages

Toshiba e-STUDIO 283 User Manual - German - 96 pages

Toshiba e-STUDIO 283 Quick start guide - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info