804464

Toshiba e-Studio 2802A Manual

32
Zoom out
Zoom in
Previous page
1/218
Next page
2 COPY FUNCTIONS
30 Basic Copy Procedure
Basic Copy Procedure
Learn the basic copy procedure in this section. For the other various functions, see the following page:
P.37 “Copy Settings”
Make sure that the equipment is ready to copy.
P.16 “Preparation 1 - Turning Power ON”
P.18 “Preparation 2 - Loading Paper”
P.28 “Preparation 3 - Registering Paper Size and Type”
Acceptable originals
Acceptable originals differ depending on the setting position. See the table below for more details.
If you are using the Reversing Automatic Document Feeder, you can automatically scan a stack of plain paper
originals at one time.
*1 The automatic size detection function is only available when the Reversing Automatic Document Feeder is installed.
*2 The maximum number of sheets acceptable varies depending on the type of original.
Maximum number of originals scanned at one time
When you use “CONTINUE SCAN” with the Reversing Automatic Document Feeder (RADF), you can scan up
to 150 original sheets at one time. When the number of sheets to be scanned exceeds 150 or the built-in
memory in the equipment is full, scanning stops and an error message is displayed on the LCD screen. Press
any button on the control panel to delete the scanned data.
Precautions for Reversing Automatic Document Feeder
Do not use the following types of original as they may cause a paper misfeed or damage to the equipment:
Originals that are folded or curled
Originals with carbon copies
Originals that have been taped, pasted, or cut-out
Originals that have been clipped or stapled
Originals with holes or tears
Originals that are damp
Originals whose correction fluid or ink has not been dried completely
Overhead transparencies or tracing paper
Coated paper (e.g. coated with wax)
Originals with multiple holes punched (e.g. loose leaf paper)
The following types of originals can be used but need extra care:
Originals that you cannot slide with your fingers or whose surface is specially treated: They should be
fanned well before loading since they may not be able to be separated from each other at feeding.
Originals that are folded or curled: They should be smoothed out before being loaded.
When black streaks appear
If the scanning area or the guide area is dirty, image problems such as black streaks may occur. Weekly
cleaning of these areas is recommended.
P.200 “Regular Cleaning”
Setting
position Type Maximum
size
Acceptable sizes for automatic
size detection*1
Maximum number
of sheets
Original glass Plain paper
Special paper
Booklets
A4 or LT - -
Reversing
Automatic
Document
Feeder
Plain paper
Thin paper
Thick paper
(50 - 104 g/m2,
13 - 27 lb.
Bond)
A3 or LD Other than North America and China:
A3, A4, A4-R, A5-R, B4, B5, B5-R
North America:
LD, LG, LT, LT-R, ST-R, COMP
China:
A3, A4, A4-R, A5-R, 8K, 16K, 16K-R
50 sheets (80 g/
m2, 20 lb. Bond)
(or stack height 9.5
mm)*2
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-Studio 2802A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-Studio 2802A in the language / languages: English as an attachment in your email.

The manual is 21.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info