681671
35
Zoom out
Zoom in
Previous page
1/75
Next page
Menu functions > 35
USB
MENU
This menu controls the operation of the printer’s USB data interface.
N
ETWORK
MENU
This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.
ITEM SETTINGS EXPLANATION
SOFT RESET ENABLE / DISABLE Enables or disables the SOFT RESET command.
SPEED 12Mbps / 480Mbps Selects the interface speed.
OFFLINE RECEIVE ENABLE / DISABLE Enables or disables this function. When set to Enable,
the interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a service call
occurs.
SERIAL NUMBER ENABLE / DISABLE Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB
device connected to your PC.
NOTE
When you have changed any settings in the USB MENU, turn the printer OFF,
then ON again.
ITEM SETTINGS EXPLANATION
TCP/IP ENABLE / DISABLE Enables or disables this network protocol.
IP VERSION IP v4
IP v4+v6
IP v6
Sets up the IP version.
Operates with IPv4 only (not valid with IPv6).
Operates with both IPv4 and IPv6.
Operates with IPv6 only (not valid with IPv4).
From this stage, if IPv6 only is set from UI, for example
Telnet, “IP v6” appears as the value of IP Version on
the operation panel. “IP v6” will disappear from the
value if “IP v4” or “IP v4+v6” is selected.
Display Condition: TCP/IP should be enabled.
NETBEUI ENABLE / DISABLE Enables or disables this network protocol.
NETBIOS OVER TCP e-STUDIO222CP:
ENABLE / DISABLE
e-STUDIO262CP:
ENABLE / DISABLE
Sets Enable/Disable of NetBIOS over TCP protocol.
Display Conditions:
> > TCP/IP should be enabled.
> > IP Version is not IPv6.
NETWARE e-STUDIO222CP:
ENABLE / DISABLE
e-STUDIO262CP:
ENABLE / DISABLE
Enables or disables this network protocol.
ETHERTALK ENABLE / DISABLE Enables or disables this network protocol.
FRAME TYPE AUTO / 802.2 / 802.3 /
ETHERNET II / SNAP
Selects the Ethernet MAC layer frame type.
Display Condition: Netware should be enabled.
IP ADDRESS SET AUTO / MANUAL Specifies whether IP address allocation is automatic
(DHCP) or manually assigned.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 262cp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 262cp in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 262cp

Toshiba e-STUDIO 262cp User Manual - German - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info