481915
34
Zoom out
Zoom in
Previous page
1/184
Next page
-STUDIO 16 / 20 / 25
DIGITAL PLAIN PAPER COPIER
OPERATOR’S MANUAL FOR COPYING FUNCTION
The Document Business Class.
WARNING: Changes or modification made to this equipment, not expressly approved by
TOSHIBA TEC or parties authorized by TOSHIBA TEC could void the user's
authority to operate the equipment.
The United States Environment Protection Agency (EPA) has introduced a voluntary ENERGY STAR
Program to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an ENERGY STAR Partner, the
TOSHIBA TEC CORPORATION has determined that this copier model meets the ENERGY STAR
guidelines for energy efficiency.
ENERGY STAR guidelines for this class of copier require ENERGY STAR copiers to have an ‘Super
Power Save Mode’ (Off Mode) feature that automatically turns the copier off after a period of inactivity,
ensuring night and weekend shut-off. The copier must also automatically change to a ‘Low Power Mode’
(Automatic Energy Save) after a period of time since the last usage.
For Copier+Printer or FAX models, ENERGY STAR guidelines require ENERGY STAR Multifunction
copiers to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode after a
period of inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy
Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements:
e-STUDIO16/20/25 Copier + Printer model (Base model)
‘Super Power Save Mode’-
The copier consumes less than 5 watts in the ‘Super Power Save Mode’.
‘Super Power Save Mode’ Default Time-
The default time for the ‘Super Power Save Mode’ is 30 minutes (e-STUDIO16/20)/60 minutes
(e-STUDIO25).
‘Low Power Mode’-
The copier consumes less than 111.6 watts (e-STUDIO16)/127.0 watts (e-STUDIO20)/146.25
watts (e-STUDIO25) during Energy Save.
‘Low Power Mode’ Default Time-
The default time for the ‘Low Power Mode’ is 15 minutes.
e-STUDIO16/20/25 Copier + Printer or FAX models (Multifunction model)
‘Sleep Mode’-
The copier consumes less than 70 watts (e-STUDIO16/20)/80 watts (e-STUDIO25) in the ‘Sleep
Mode’.
‘Sleep Mode’ Default Time-
The default time for the ‘Sleep Mode’ is 30 minutes (e-STUDIO16/20)/60minutes (e-STUDIO25).
‘Low Power Mode’-
The copier consumes less than 111.6 watts (e-STUDIO16)/127.0 watts (e-STUDIO20)/146.25
watts (e-STUDIO25) during Energy Save.
‘Low Power Mode’ Default Time-
The default time for the ‘Low Power Mode’ is 15 minutes.
Note 1- The default setting for the ‘Super Power Save Mode’ or ‘Sleep Mode’ and ‘Low Power Mode’ can
be changed. If you want to increase the default setting, contact your authorized Toshiba dealer.
Note 2- For Copier model (Base model), to restart the copier after an automatic shut-off, press the
SUPER ENERGY SAVER key.
Note 3- For Copier model (Base model), after an automatic shut-off, the weekly timer feature cannot be
activated. If you prefer to activate this feature, contact your authorized Toshiba dealer.
In accordance with the EPA ENERGY STAR Program guidelines, this copier is suitable for the use of
recycled copier paper (with up to 100% post consumer content) meeting the requirements as specified
in ENV 12281 (paper-printing and business paper-Requirements for copy paper for dry toner imaging
processes).
If you have questions regarding the use of recycled paper or some recommended types of recycled
paper, please contact your authorized Toshiba dealer.
ENERGY STAR is a U.S. registered mark.
EPA ENERGY STAR ® (MFD)
1
1
2
3
4
5
6
7
9
10
11
12
8
1. TOSHIBA QUALITY IS SECOND TO NONE
Supplies / Parts
Dependability
Genuine Toshiba supplies are subjected to the strictest of inspections so that all supply you receive will
perform at optimal levels.
High Productivity
Genuine Toshiba supplies are created to meet the demands of our competitive world and provide high-
speed reliable trouble-free copies when you need them.
Stable Image Quality
Genuine Toshiba supplies are designed to provide consistently stable image output day after day.
Copier Kind
Genuine Toshiba supplies are designed to keep the copier and all its parts in trouble-free working order.
Reduction of machine wear is due to Toshibas intimate knowledge of the copiers characteristics ensuring
the highest standard of care.
Machine Balance
From the beginning Toshiba supplies and machines were made for each other. Whenever Toshiba designs
a new machine, it also designs a new toner that is made just for that machine. By using Genuine Toshiba
supplies with Toshiba copiers you guarantee optimum performance.
e-STUDIO16/20/25 Process Unit
The following information is embossed at the position indicated.
e-STUDIO16/20/25 Toner Cartridge
The following information is embossed at the position indicated.
It is recommended that genuine Toshiba Supplies and parts be used in order to obtain optimum results.
e-STUDIO16 e-STUDIO20/25
1
2
3
4
5
6
7
9
10
11
12
8
2
1. TOSHIBA QUALITY IS SECOND TO NONE (Cont.)
General
Toners
Optimum Image Quality
Genuine Toshiba toners use ultra-fine quality materials and precisely controlled parameters so that
Toshiba copiers can continually generate sharp, high-quality image output.
Cost Advantage
Genuine Toshiba toners mean value. They are designed to use only the proper amount of toner enabling
the machine to continue to operate until all the toner has been used. In this way you get the full value of
the toner.
Environmental Harmony
Genuine Toshiba toners are designed with the environment in mind. To care for Mother Earth, we use
embossed or plastic labels making our toners fully recyclable. In addition, harmful dust and ozone levels
have been reduced to improve the working environment.
Human Friendly
Genuine Toshiba toners are people-friendly. Before approving our toners for sale, we test them to be
sure they pass the strictest of health standards. This takes the worry out of handling the toner.
ISO 9000 and ISO 14000
Toshiba toner plants are ISO 9001 or ISO 9002 and ISO 14001 certified.
Therefore quality of craftsmanship and environmental friendly production are guaranteed from the factory.
Service and Support Benefits
Toshibas service engineers are certified to keep your copier performing at optimum levels. To ensure
continuous image quality, it is highly recommended to utilize a authorized Toshiba service provider to
care for and perform periodical maintenance so that you can get full benefit from your copier.
3
1
2
3
4
5
6
7
9
10
11
12
8
2. PREFACE
COPYRIGHT 2000
TOSHIBA TEC CORPORATION
Thank you for purchasing the Toshiba Digital e-STUDIO16/20/25 Copier. This Operators Manual describes
the following:
how to use the digital copier
how to make copies
how to inspect and carry out maintenance on the digital copier
how to remedy mechanical and copying problems.
Before using your e-STUDIO16/20/25 digital copier, thoroughly read and understand this Operators Manual.
To ensure that clean copies are made at all times and to make sure that the digital copier is in optimum
working order, keep this Operators Manual handy for future reference.
To ensure correct and safe use of the Toshiba Digital e-STUDIO16/20/25 Copier, this Operators Manual
describes safety precautions according to the following three levels of warning:
Before reading this Operators Manual, you should fully understand the meaning and importance of
these alert words.
Warning ..... Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
injury, or serious damage, or fire in the equipment or surrounding assets.
Caution ...... Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ........... Indicates a procedure you should follow to ensure the optimal performance of the digital
copier and problem-free copying.
Tip .............. Describes information useful to know when operating the digital copier.
Advice ........ Describes an operation you should follow to maintain the digital copier in good working
order.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
1.Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2.Before opening any covers or removing any units from the copier, discharge the static electricity from
your body by touching a metal part of the copier.
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is Toshiba Europe GmbH Hammfelddamm 8,41460 Neuss, Germany.
Phone +49-2131 -1245-0
1
2
3
4
5
6
7
9
10
11
12
8
4
2. PREFACE (Cont.)
The e-STUDIO16/20/25 is a plain paper digital copier.
The e-STUDIO16/20/25 scans originals and stores the resulting data in its memory as digital images.
The e-STUDIO16/20/25 allows you not only to process and edit this digital image data, but also enables
copies to be sorted and non-sorted quietly, quickly, and easily. The e-STUDIO16/20/25 incorporates an
LCD display and menu selection keys that graphically represent copier functions. As a result, anybody
can make clear-looking copies quickly and easily.
The e-STUDIO16/20/25 also has the following convenient features which allow the digital copier to be
used in many applications.
Copying speed is 16 (A4) copies per minute on the e-STUDIO16, 20 (A4) copies on the e-STUDIO20
and 25 (A4) copies on the e-STUDIO25.
The automatic original density function automatically reads the density of the original to set the ideal
copy density.
The size of the original is automatically read, and appropriate paper size and reproduction ratio are
automatically selected when using the Automatic Document Feeder or Reversing Automatic Document
Feeder (optional).
Wide enlargement/reduction range (e-STUDIO16: 50% to 200%, e-STUDIO20/25: 25% to 400%) 50%
to 200% when the optional Reversing Automatic Document Feeder or optional Automatic Document
Feeder is used.
Duplex copies can be made automatically from two-sided originals. (Optional Reversing Automatic
Document Feeder and Automatic Duplexing Unit are required.)
Single-sided copies can be made automatically from two-sided originals. (Optional Reversing Automatic
Document Feeder is required.)
Duplex copies can be made automatically from one-sided originals. (Optional Automatic Document
Feeder or Reversing Automatic Document Feeder and Automatic Duplexing Unit are required.)
Comes with the following digital editing functions:
Negative/positive reversal, X-Y zoom, mirror image, etc.
2-in-1 and 4-in-1 (Available for the Standard Model)
Book copying and magazine sort (Optional Automatic Duplexing Unit is required.)
With the electric sort function, you can also sort at a high speed without damaging the original.
Copy sizes from Statement up to Ledger are acceptable.
Comes with a weekly timer. This timer allows automatic sleep mode at the specified startup and
shutdown times, respectively.
Upon installing the optional printer board, the copier can serve as a printer, allowing you to print out
data from your computer. In addition, with the optional network interface card installed, the copier can
serve as a network printer.
1. Features of the e-STUDIO16/20/25
5
1
2
3
4
5
6
7
9
10
11
12
8
3. TABLE OF CONTENTS
1. TOSHIBA QUALITY IS SECOND TO NONE ..................................................................................... 1
2. PREFACE........................................................................................................................................... 3
1. Features of the e-STUDIO16/20/25 ............................................................................................ 4
3. TABLE OF CONTENTS ..................................................................................................................... 5
4. PRECAUTIONS ................................................................................................................................. 8
1. Installation .................................................................................................................................... 8
2. General Precautions .................................................................................................................... 9
1. BEFORE MAKING COPIES .............................................................................................................. 1-1
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT .......................................................................1-2
2. DESCRIPTION OF THE DIGITAL COPIER ................................................................................... 1-3
Main Components......................................................................................................................... 1-3
Control Panel ................................................................................................................................ 1-4
Message Display Panel ................................................................................................................ 1-6
3. PAPER............................................................................................................................................. 1-7
Acceptable Paper Types and Sizes / Handling and Storing Paper.............................................. 1-7
Changing the Paper Size of the Cassette .................................................................................... 1-8
Turning ON the Power Switch / Auto Job Start ..........................................................................1-10
Cassette Size Setting ................................................................................................................. 1-11
4. DEPARTMENT CODES ................................................................................................................1-13
2. HOW TO MAKE COPIES ................................................................................................................... 2-1
1. GENERAL COPYING PROCEDURE............................................................................................. 2-2
2. SETTING ORIGINALS.................................................................................................................... 2-4
Originals ........................................................................................................................................ 2-4
Placing the Original on the Glass ................................................................................................. 2-5
Using the Automatic Document Feeder (optional)
or the Reversing Automatic Document Feeder (optional) ...........................................................2-6
3. INTERRUPT COPYING ............................................................................................................ 2-8
3. BASIC MENU ..................................................................................................................................... 3-1
1. PAPER SELECTION ....................................................................................................................... 3-2
Automatic Paper Selection (APS) ................................................................................................ 3-2
Manual Paper Selection ............................................................................................................... 3-4
Bypass Copying ............................................................................................................................ 3-5
Bypass Copying by Specifying the Copy Size ............................................................................. 3-7
2. REDUCTION AND ENLARGEMENT COPYING ........................................................................... 3-8
3. COPYING WITH COPY DENSITY SELECTION ......................................................................... 3-13
4. ORIGINAL IMAGE QUALITY SELECTION .................................................................................. 3-15
1
2
3
4
5
6
7
9
10
11
12
8
6
4. EDIT MENU ........................................................................................................................................ 4-1
1. DUPLEX COPYING ........................................................................................................................ 4-2
1-Sided Originals > 1-Sided Copies (default setting) .............................................................4-3
1-Sided Originals > 2-Sided Copies ........................................................................................ 4-4
2-Sided Originals > 2-Sided Copies ........................................................................................ 4-8
2-Sided Originals > 1-Sided Copies ........................................................................................ 4-9
Book-Type Originals > 2-Sided Copies ................................................................................. 4-10
2. DUAL PAGE COPYING ................................................................................................................4-12
3. IMAGE SHIFT COPYING ............................................................................................................. 4-13
4. EDGE ERASE COPYING .............................................................................................................4-14
5. 2-IN-1/4-IN-1 ................................................................................................................................. 4-15
6. MAGAZINE SORT ........................................................................................................................ 4-18
7. ANNOTATION ................................................................................................................................4-21
8. EDITING........................................................................................................................................ 4-23
Mirror Image ................................................................................................................................ 4-23
Negative/Positive Reversal ......................................................................................................... 4-24
9. JOB BUILD ................................................................................................................................... 4-25
10. JOB MEMORY ............................................................................................................................ 4-26
11. PAPER TYPE ..............................................................................................................................4-28
12. MENU LIST ................................................................................................................................. 4-29
5. PROGRAM MENU ............................................................................................................................. 5-1
1. WALKUP SCREEN ......................................................................................................................... 5-2
2. TIMERS ........................................................................................................................................... 5-3
Auto Clear ..................................................................................................................................... 5-3
Auto Low Power ............................................................................................................................ 5-4
Automatic Sleep ............................................................................................................................ 5-5
3. WEEKLY TIMER .............................................................................................................................. 5-7
4. SPEAKER VOLUME ..................................................................................................................... 5-10
5. DEPARTMENT CODE .................................................................................................................. 5-11
Department Code Setting ...........................................................................................................5-11
Clearing Department Code Counters ........................................................................................5-13
Deleting Department Code .........................................................................................................5-14
Change Department Code Setting .............................................................................................5-15
Report Printing ............................................................................................................................ 5-17
Canceling/Resuming Department Management .......................................................................5-18
6. COPY SETUP ............................................................................................................................... 5-19
7. DATE AND TIME ........................................................................................................................... 5-23
8. CHANGE DISPLAY PANEL LANGUAGE ..................................................................................... 5-26
9. FUNCTION LIST ........................................................................................................................... 5-27
10. TOTAL COUNTER ...................................................................................................................... 5-28
6. FINISHING MODE SELECTION ....................................................................................................... 6-1
1. FINISHING MODE SELECTION .................................................................................................... 6-2
2. NON-SORT COPYING ................................................................................................................... 6-3
3. SORT COPYING ............................................................................................................................ 6-4
4. OFFSET COPYING ........................................................................................................................ 6-6
5. ALTERNATION ................................................................................................................................ 6-7
6. STAPLING .....................................................................................................................................6-10
When the optional finisher is installed ....................................................................................... 6-10
When the optional Stapler kit is installed ................................................................................... 6-13
3. TABLE OF CONTENTS (Cont.)
7
1
2
3
4
5
6
7
9
10
11
12
8
7. WHEN THE GRAPHIC SYMBOL FLASHES .................................................................................... 7-1
1. DESCRIPTION OF THE GRAPHIC SYMBOLS ............................................................................. 7-2
2. LOADING PAPER ........................................................................................................................... 7-3
Adding Paper to the Cassettes..................................................................................................... 7-3
Adding Paper to the Large-Capacity Feeder (optional) ............................................................... 7-4
3. REPLACING TONER CARTRIDGE ............................................................................................... 7-5
4. REPLACING PROCESS UNIT ....................................................................................................... 7-8
Replacing Process Unit ................................................................................................................ 7-8
Replacing Ozone Filter ............................................................................................................... 7-11
5. CLEARING PAPER JAM .............................................................................................................. 7-12
6. ADDING STAPLES ....................................................................................................................... 7-22
7. REMOVING JAMMED STAPLES ................................................................................................. 7-26
8. CALLING FOR SERVICE ............................................................................................................. 7-29
9. PERIODIC MAINTENANCE .........................................................................................................7-30
8. USER TEST MODE ............................................................................................................................ 8-1
1. AUTOMATIC TEST MODE.............................................................................................................. 8-2
AUTO TEST .................................................................................................................................. 8-2
2. INDIVIDUAL TEST MODE .............................................................................................................. 8-3
INDIVIDUAL TEST Summary ....................................................................................................... 8-3
3. ADF TEST ....................................................................................................................................... 8-4
4. KEY TEST ....................................................................................................................................... 8-6
5. LED TEST ....................................................................................................................................... 8-7
6. LCD TEST ....................................................................................................................................... 8-8
7. SPEAKER TEST ............................................................................................................................. 8-9
8. SWITCH TEST .............................................................................................................................. 8-10
9. TEST PRINT ................................................................................................................................. 8-11
10. PRINTING A TEST RESULT ......................................................................................................8-12
9. MAINTENANCE ................................................................................................................................. 9-1
1. DAILY INSPECTION ....................................................................................................................... 9-2
2. CLEANING THE WIRE ................................................................................................................... 9-3
3. SIMPLE TROUBLESHOOTING...................................................................................................... 9-5
10. SPECIFICATIONS & OPTIONS ....................................................................................................10-1
1. e-STUDIO16/20/25 SPECIFICATIONS ........................................................................................10-2
2. SPECIFICATION OF OPTIONS ...................................................................................................10-3
3. PACKING LIST .............................................................................................................................. 10-8
4. COPY FUNCTION COMBINATION MATRIX ............................................................................... 10-9
1
2
3
4
5
6
7
9
10
11
12
8
8
4. PRECAUTIONS
1. Installation
The e-STUDIO should be placed near an outlet that is easily accessible.
1The e-STUDIO16/20/25 should be installed by an authorized TOSHIBA service technician.
Note
The packing material should be disposed of properly.
3After a suitable place has been selected for installation of the e-STUDIO16/20/25, please
avoid frequent movement. Avoid excessive heat, dust, vibration and direct sunlight.
Also, provide proper ventilation as the copier emits a small amount of ozone.
Note
1. The recommended environmental range for use is as follows:
Temperature: 10~30°C/50~86°F
Humidity: 20~85% RH
2. To ensure optimal operation, allow clearances of at least 80 cm on the left, 80 cm on the right and
10 cm in the rear (refer to the illustration below).
2To obtain the best possible results, this machine should be used in conjunction with a
dedicated AC power line at the following ratings:
220 - 240 VAC, 50/60 Hz, 1.1 kW or less (e-STUIDO16)
220 - 240 VAC, 50/60 Hz, 1.2 kW or less (e-STUIDO20/25)
110 - 127 VAC, 50/60 Hz, 1.4 kW or less (for Saudi Arabia 100V version only)
Note
1. The use of other appliances or other equipment on the same line as this machine may adversely
affect performance and copy quality.
2. Be sure to use a 3-conductor, grounded wall outlet.
3. In areas where a 2-pin plug is used, the copier must be grounded for safety.
Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
PRECAUTIONS
10 cm
80 cm
80 cm
9
1
2
3
4
5
6
7
9
10
11
12
8
2. General Precautions
1 Handle and use the machine gently and carefully.
Do not place anything on the paper cassettes or original feed tray.
Never allow the power cable to be trampled on or pinched between hard objects, otherwise an
accident or electrical trouble might occur.
Do not allow any metal items such as paper clips to fall into the copier.
3It is recommended that only supplies made or designated by Toshiba be used for the
e-STUDIO16/20/25 in order to optimize copy quality. All supplies should be stored in a
cool, dry area.
For optimum performance, it is recommended that high quality 80 g/m2. Xerographic bond paper be
used.
Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
2Be sure to turn OFF the power switch (unless using auto timer mode):
When you leave your office at night.
If a power failure occurs.
Caution
When turning OFF the power switch, be sure to do so only after the machine cycling has
come to a complete stop.
Be sure to disconnect the power-cord plug:
When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
If an unusual noise is heard from the copier.
If the outside of the copier becomes unusually hot.
If any part of the copier is damaged, or it has been dropped.
If the copier has been exposed to rain or liquid.
Warning label
Identification label
1
2
3
4
5
6
7
9
10
11
12
8
10
1-1
1
2
3
4
5
6
7
9
10
11
12
8
1. BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT ......................................................... 1-2
2. DESCRIPTION OF THE DIGITAL COPIER ...................................................................... 1-3
Main Components ............................................................................................................. 1-3
Control Panel ..................................................................................................................... 1-4
Message Display Panel ..................................................................................................... 1-6
3. PAPER ............................................................................................................................... 1-7
Acceptable Paper Types and Sizes / Handling and Storing Paper .................................. 1-7
Changing the Paper Size of the Cassette ........................................................................ 1-8
Turning ON the Power Switch / Auto Job Start............................................................... 1-10
Cassette Size Setting ......................................................................................................1-11
4. DEPARTMENT CODES ..................................................................................................1-13
1
2
3
4
5
6
7
9
10
11
12
8
1-2 BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Stapler (KK-1600)
Job separator (MJ-5001)
Offset tray (MJ-5002)
Automatic duplexing unit (MD-0101)
Stack feed bypass (MY-1016)
Paper feed unit (MY-1015)
Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
Stapler (KK-1600)
Automatic duplexing unit
(MD-0101)
Stack feed bypass
(MY-1016)
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Finisher including Transportation
bridge (MJ-1011)*
(e-STUDIO20/25 only)
Paper feed unit (MY-1015)
Large Capacity Feeder
(KD-1010)**
(e-STUDIO20/25 only)
* The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher.
** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010).
Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD-
1009.
1-3
1
2
3
4
5
6
7
9
10
11
12
8
2. DESCRIPTION OF THE DIGITAL COPIER
Main Components
Original cover
Original scale
Copy receiving tray
Power switch
Original glass
Control panel
Front cover
Cassette
Manual pocket
Side cover
Brightness control*
* Brightness control
Used to adjust the brightness of the message display panel.
Paper stopper
1
2
3
4
5
6
7
9
10
11
12
8
1-4 BEFORE MAKING COPIES
Control Panel
IMAGE MODE
You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently
selected image mode illuminates.
Message Display Panel
Displays the copier conditions, operating procedures, and various instructions and information to the user in text and
graphics.
LIGHT/DARK
Use this key when making a copy to specify the copy density.
PAPER SUPPLY
You can specify from which paper cassette you would like to feed paper for making a copy.
ZOOM
You can specify the scaling factor for copying.
FINISHING
You can specify how you would like to output copies (including Sort and Offset).
COPY
Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation
in the COPY mode in detail.
Paper Jam Lamp
This lamp blinks when an original or copy paper is jammed.
Recording Paper Lamp
This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette.
Toner Lamp
This lamp illuminates when the toner is about to run out or runs out completely.
PC Communication Lamp
This lamp is not used in the COPY mode.
This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out
in the PRINTER mode, or while it is communicating as a local scanner.
FAX Communication Lamp
This lamp is not used in the COPY mode.
This lamp blinks while the copier is communicating in the FAX mode.
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
1-5
1
2
3
4
5
6
7
9
10
11
12
8
Arrow Keys
Use these keys to select a desired setting option or to enter a desired name or value in the PROGRAM mode or
EDIT MENU.
PRINTER Key
Use this key to adjust the printer settings or perform printing automatically.
MAIN MENU Key
Press this key to switch from the PROGRAM mode to the COPY mode.
You can select the jobs that you would like to perform in COPY, FAX or PRINTER mode.
PROGRAM Key
Use this key to reset the settings of the copier or adjust the default settings.
INTERRUPT Key
Use this key to interrupt the copying job in process and to perform another copying job. You can resume the
interrupted copying job by pressing this key again.
SUPER ENERGY SAVER Key
Press this key if the copier is unused for a long time and the copier goes into the Super Energy Save Mode. Only the
lamp located to the left of the key illuminates. The Message Display and the other lamps turn off. Press this key
again to resume copying. After warming up, the copier becomes ready to copy.
FUNCTION CLEAR Key
You can clear all modes that you have selected and reset the settings to the defaults.
CLEAR/STOP Key
Press this key to clear the number of copies to make or to stop copying.
START Key
Press this key to start copying.
Numeric Keys
Use these keys to enter the number of copies that you would like to make.
SET Key
Use this key to accept the data that you have entered in the PROGRAM mode or EDIT MENU.
CANCEL Key
Use this key to return to a previous menu in the PROGRAM mode or EDIT MENU.
Automatic Function Clear Mode
Even if you do not press the
key, the automatic function clear mode
will clear all settings to defaults and
the basic screen will be displayed, 45
seconds after copying is finished or
after the last key is pressed. While the
department management function is
being operated, the display returns to
the department code input screen.
Page 5-3.
1
2
3
4
5
6
7
9
10
11
12
8
1-6 BEFORE MAKING COPIES
When the power is turned on, the following basic screen is shown on the Message Display Panel. (When
the copier is controlled using the department code, a different screen is display. Page 1-13)
The Message Display Panel indicates the copiers status. It also illustrates operational procedures or
settings using brief sentences or icons.
Message Display Panel
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
Message Copy quantity
Light/Dark
Zoom
Paper size of the currently
selected paper source
Finishing
READY 1
PAPER : A4 :AUTO
FINISHING :SORT ZOOM :100%
EDIT
1-7
1
2
3
4
5
6
7
9
10
11
12
8
3. PAPER
Acceptable Paper Types and Sizes / Handling and Storing Paper
Acceptable Paper Types and Sizes
Remarks
Plain paper with holes for filing
cannot be used.
Plain paper with holes for filing
cannot be used.
(for e-STUDIO20/25 only)
Plain paper with holes for filing
cannot be used.
Also, some of paper on the left
may not be used depending on
type or thickness.
(For details, consult your
service technician.)
Maximum
capacity
550 sheets
(Height:
approx. 60
mm)
2500 sheets
100 sheets
(Height:
apporx. 11
mm)
1 sheet
Paper size
Regular size
A/B format:
A3, A4, A4-R, A5-R,
FOLIO, B4
LT format :
LT, LT-R
Regular size
A/B format: A4 only
Regular size
A/B format:
A3, A4, A4-R, A5-R,
FOLIO, B4
LT format :
LT, LT-R
Type of paper
Plain paper
(64~80 g/m2) only
Plain paper
(64~80 g/m2) only
Multi-sheet feeding:
Plain paper (64~80
g/m2) only
1-sheet feeding:
Plain paper (80~163
g/m2), tracing paper,
OHP film, labels
Feeder
Cassette
Paper
feed unit
(option)
Paper
feed
pedestal
(option)
Large-
capacity
feeder
(option)
Sheet
feed
bypass
(option)
Handling and Storing Paper
Pay attention to the following points:
Avoid using paper that is specially treated or paper that has been printed on another machine, and
also avoid performing double copying on the same side of paper; this may cause a malfunction.
Do not use paper with creases, wrinkles or that is prone to curling, slick paper, or rough paper; this
may cause paper misfeeds.
Once opened, paper should be kept in its wrapping paper and stored in a damp-free place.
To prevent paper being folded or bent, store it evenly on a flat surface.
Maximum capacity refers to the number of sheets when the paper recommended by Toshiba is set.
1
2
3
4
5
6
7
9
10
11
12
8
1-8 BEFORE MAKING COPIES
Changing the Paper Size of the Cassette
The paper size of the copiers cassettes can be changed to appropriate paper sizes using the following
procedure.
3Push the right (unlock) side of the size selection
lever to unlock it.
4While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper
width (as indicated on the bottom surface of the
cassette).
2Move the width guide to the desired paper size
position (as indicated on the bottom surface of the
cassette).
1Pull the cassette out until it stops.
3. PAPER (Cont.)
1-9
1
2
3
4
5
6
7
9
10
11
12
8
5Push the left (lock) side to lock the size selection
lever.
Tip
Changing the paper size of the cassette alone does not change
the cassette size indication on the display. To change the cassette
size, perform cassette size setting on the Message Display Panel.
Page 1-11
7Install the cassette into the copier.
6Place paper in the cassette.
Up to 550 sheets of paper (60 mm) (recommended by
Toshiba) can be set.
Do not add paper above the line indicated on the guide.
Do not use creased, folded, wrinkled or damp sheets of
paper.
Side guide
Approx. 0.5 mm
Side guide
Approx. 0.5 mm
Note
Make sure that a gap of approx. 0.5 mm (less than 1 mm in
total) is left between the paper and the side guide. If there is
no gap, this would causes paper misfeeding.
1
2
3
4
5
6
7
9
10
11
12
8
1-10 BEFORE MAKING COPIES
3. PAPER (Cont.)
Turning ON the Power Switch / Auto Job Start
Turning On the Power Switch
2The Ready message appears.
This message indicates that the copier is ready for operation.
Auto Job Start
READY 1
PAPER :APS :AUTO
FINISHING :NONSORT ZOOM :100%
EDIT
While the copier is warming up, place the original on the glass,
select the desired copy modes and press the key.
Wait warming up:Auto Start
When the machine reaches its proper operating temperature,
copying will automatically start.
Tip
Even after you have pressed the key, you can change
the copy modes if copying has not yet started. To cancel the
auto job start mode, press the key.
1Open the power switch cover and turn ON the switch.
This message appears on the message display panel of
the basic screen :
Please wait
Wait warming up
1-11
1
2
3
4
5
6
7
9
10
11
12
8
Cassette Size Setting
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
1Press the key to enter the program menu.
2Select "01.DEFAULT SETTINGS" and press the
key.
Enter the paper size loaded in each paper cassette in the copier. When the size of the paper loaded in
a cassette is changed ( Page 1-8), please reset the cassette size before making a copy. A paper jam
indication may result if the wrong paper size is selected.
3Select "01.MACHINE DEFAULTS" and press the
key.
Tip
"03. FAX SETUP" appears on the menu only when the FAX
option is installed.
DEFAULT SETTINGS
01.MACHINE DEFAULTS
02.COPY SETUP
03.FAX SETUP
MACHINE DEFAULTS
01.CASSETTE SIZE
02.WALKUP SCREEN
03.TIMERS
4Select "01.CASSETTE SIZE" and press the key.
Tip
"02. WALKUP SCREEN" appears on the menu only when the
FAX option is installed.
5Press the or key to select the paper
cassette to be specified and press the key.
CASSETTE SIZE
01.CASSETTE 1
02.CASSETTE 2
03.CASSETTE 3
6Press the or key to select the
size of paper loaded in the paper cassette
and press the key.
The paper size in the paper cassette is specified.
Then the screen returns to MACHINE DEFAULT
selection.
Select paper size
01.A3
02.FOLIO
03.B4
04.A4
05.A4-R
06.A5-R
07.LT
08.LT-R
1
2
3
4
5
6
7
9
10
11
12
8
1-12 BEFORE MAKING COPIES
7Repeat steps 4 to 6 to specify the paper size for other
paper cassettes, as necessary.
8Press the key to return to the initial screen for
copying.
3. PAPER (Cont.)
1-13
1
2
3
4
5
6
7
9
10
11
12
8
4. DEPARTMENT CODES
If the copier is set up so that department codes can be used, you can make copies only after entering a
pre-assigned department code.
1When the department control function is in use, the
screen shown on the right appears immediately after
the power switch is turned on.
2Enter the 5-digit department code, and press key.
The department code is shown with asterisks (*****). When
a correct department code is entered, the following message
appears.
3Make copies, as you would normally.
When you have finished making copies, either press the
key twice, or wait 45 seconds.
When a wrong department code is entered, the following
message appears. Enter the correct department code.
Enter DEPARTMENT CODE 1
PAPER :APS :AUTO
FINISHING :SORT ZOOM :100%
EDIT
READY 1
PAPER :APS :AUTO
FINISHING :SORT ZOOM :100%
EDIT
Invalid DEPARTMENT CODE 1
PAPER :APS :AUTO
FINISHING :SORT ZOOM :100%
EDIT
Enter DEPARTMENT CODE 1
PAPER :APS :AUTO
FINISHING :SORT ZOOM :100%
EDIT
READY
Invalid DEPARTMENT CODE
1
2
3
4
5
6
7
9
10
11
12
8
1-14 BEFORE MAKING COPIES
2-1
1
2
3
4
5
6
7
9
10
11
12
8
2. HOW TO MAKE COPIES
1. GENERAL COPYING PROCEDURE ...............................................................................2-2
2. SETTING ORIGINALS ...................................................................................................... 2-4
Originals ............................................................................................................................ 2-4
Placing the Original on the Glass ..................................................................................... 2-5
Using the Automatic Document Feeder (optional) or
Reversing Automatic Document Feeder (optional) ....................................................... 2-6
3. INTERRUPT COPYING .................................................................................................... 2-8
1
2
3
4
5
6
7
9
10
11
12
8
2-2 HOW TO MAKE COPIES
1. GENERAL COPYING PROCEDURE
When originals are set and the key is pressed with all settings unchanged, copies are made using
the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of
copies to be made.
1Place originals.
When placing an original on the glass: Page 2-5
When placing originals facing up in the automatic document
feeder (optional) or the reversing automatic document feeder
(optional): Page 2-6
The initial (default) settings of the copier at the time of installation
are as shown on the right. You can change these initial settings.
Page 5-18
*1 The copy modes that are automatically set when the power
is turned on or when the key is pressed on the
control panel are called the initial (default) settings.
Copying Procedure
Reproduction ratio............ 100%
Copy quantity ................... 1
Automatic paper selection
1-side copies from 1-side originals
Automatic image density
Text/photo mode
Non-sort mode
Initial settings
Original scale
Original
Slide
Automatic
document
feeder
2-3
1
2
3
4
5
6
7
9
10
11
12
8
2Set the desired copy modes.
The automatic paper selection (APS) mode, automatic image
density mode and copying of one original are the default
settings.
3Press the key.
The message COPYING appears. The copier starts
copying. After completion of the copying, the message
READY appears again.
For the e-STUDIO16, when an original is scanned from
the glass, a message appears prompting you to specify
the size of the original that you would like to copy.
Use the or key to specify the size of the
original. Then press the key. The machine will start
copying.
COPYING 1
PAPER : A4-R :AUTO
FINISHING :SORT :100%
Select original size 1
A4
A3
A4-R
A5-R
B4
1
2
3
4
5
6
7
9
10
11
12
8
2-4 HOW TO MAKE COPIES
2. SETTING ORIGINALS
Originals
The following specifications apply to originals that can be used with this copier:
Remarks
Do not place any
heavy object (4 kg
or over) on the
glass.
Some of the
originals on the
left may not be
used depending
on type or
thickness.
(For details,
consult your
service
technician.)
Some of the
originals on the
left may not be
used depending
on paper quality.
Maximum
number that
can be set
50 originals
(50 to 80 g/m2) or
stacked height of
originals 8 mm
or less
100 originals
(50 to 80 g/m2)
or stacked
height of
originals 16 mm
or less
Size capable of
automatic
detection
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4
(for e-STUDIO20/
25 only)
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4
Types of original
Sheets
Three-dimensional
objects Books
Plain paper, thermal
paper (for word
processor or fax), long
originals, originals with
filing holes (2-, 3- and
4- holes):
50 to 105 g/m2
(Multi-sheet feeding)
50 to 127 g/m2
(1-sheet feeding)
Plain paper, thermal
paper (for word
processor or fax), long
originals, originals with
filing holes (2-, 3- and
4- holes):
50 to 127 g/m2
(1-sided original)
50 to 105 g/m2
(2-sided original)
Setting
place
Glass
Automatic
document
feeder
(optional)
Reversing
automatic
document
feeder
(optional)
Maximum
size
Width
: 302 mm
Length
: 432 mm
Width
: 297 mm
Length
: 432 mm
Width
: 297 mm
Length
: 432 mm
2-5
1
2
3
4
5
6
7
9
10
11
12
8
Placing the Original on the Glass
Sheet Originals
1Raise the original cover or the automatic document
feeder (optional) and place the original on the glass
facing down.
3Lower the original cover or the automatic document
feeder (optional) slowly.
2Align the original against the left inner corner of the
glass.
Tip
When copying originals with high transparency, such as an
OHP film and tracing paper, place a blank sheet of paper the
same size as the original or larger over the original.
Book-type Originals
1Raise the original cover or the automatic document
feeder (optional) and set the original in the direction
shown in the figure.
If the original is not set in the correct direction, copies will
not be delivered in the correct page order.
2Lower the original cover or the automatic document
feeder (optional) slowly.
Do not try to force the original cover or reversing automatic
document feeder (optional) to fully close over a very thick
original, such as a large book. Copies can be made if the
cover or feeder does not close fully.
During copying, an intense light may leak out. Do not look
at the original glass surface.
Automatic
document
feeder
Original
Original scale
Blank sheet
Original
1
2
3
4
5
6
7
9
10
11
12
8
2-6 HOW TO MAKE COPIES
Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option)
2. SETTING ORIGINALS (Cont.)
1After aligning the edges of the originals well, place
them on the original feed tray facing up and align
the slides to the width of the originals.
Slide
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 25 in the language / languages: English as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 25

Toshiba e-STUDIO 25 User Manual - German - 187 pages

Toshiba e-STUDIO 25 User Manual - Dutch - 185 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info