481908
14
Zoom out
Zoom in
Previous page
1/78
Next page
Chapter 1 PREPARATIONS
12
Front / Right side
10
9
8
7
2
1
5
6
3
4
11
12
13
14
1. Reversing Automatic Document Feeder
(optional, MR-3018)
The stack of originals is scanned one sheet at a time. Both
sides of the originals can be scanned. A maximum of 100
sheets (80 g/m2 or 20 lb. Bond), 80 sheets (90 g/m2 or 28
lb. Bond) (or stack height 16 mm or 0.62”) can be placed in
one go. (The maximum number of sheets that can be set
may vary depending on the media type of the originals.)
2. Operator’s manual pocket (back side)
Keep the manual in this pocket.
3. Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it
when paper jams occur.
4. Bypass tray
Use this to perform printing on special media types such
as OHP lm, waterproof paper, etc.
5. Paper feed cover
Open this cover when releasing paper misfed in the
drawer feeding area.
6. Paper feed cover (optional)
Open this cover when releasing paper misfed in the Paper
Feed Pedestal (optional) or Large Capacity Feeder (optional).
7. Paper size indicator
8. Paper Feed Pedestal (optional, KD-1023) and
Additional Drawer Module (optional, MY-1032)
or Large Capacity Feeder (optional, KD-1024)
9. Drawer
A maximum of 550 sheets (80 g/m2 or 20 lb. Bond) or 500
sheets (105 g/m2 or 28 lb. Bond) of plain paper can be
placed in one go.
10. Front cover
Open this cover when you replace the toner cartridge and
clean the charger.
11. Main power switch
Use this switch to turn the power of the equipment ON or OFF.
& P.23 Turning Power ON/OFF”
12. USB port
Use this connector when printing les stored in a USB
device or storing scanned data into the USB device.
13. USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
14. Network interface connector
Use this connector when connecting this equipment to a
network.
Description of Each Component
This section describes the names and operations of the components and options.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 2330c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 2330c in the language / languages: English as an attachment in your email.

The manual is 5.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 2330c

Toshiba e-STUDIO 2330c User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info