481877
198
Zoom out
Zoom in
Previous page
1/226
Next page
6 TROUBLESHOOTING
196 Before Calling Service Technician
Toner-related items
Copy functions cannot be set. Other functions that cannot
be set simultaneously with
copy functions have been
set.
Some functions cannot be combined set
together.
P.213 “Copying Function Combination
Matrix”
The department management
menu does not appear even
though “DEPARTMENT
CODE” is selected.
Any department code other
than the master code has
been entered in the depart-
ment code entry screen.
If you want to make settings for the
department management when it has
been already enabled, enter the master
code in the department code entry
screen, otherwise the department man-
agement menu cannot be displayed.
P.143 “Department Code”
In the department manage-
ment menu, switching the
department management to
be “YES” (enabled) or “NO”
(disabled) cannot be per-
formed.
There are print data or Fax
data in the print queue.
After the print data or Fax data have been
finished being printed, perform switching
again.
Even when the equipment is
connected with a PC by a
USB cable, the equipment is
not recognized.
This cable is not certified
according to the USB2.0 Hi-
Speed.
Use a USB2.0 Hi-Speed certified cable.
The equipment is connected
with a PC via a USB hub.
When the equipment is connected with a
PC via a USB hub, the equipment may
not be recognized. Connect it with a PC
directly by a USB cable.
Printing, scanning, device
setup or PC-Fax transmis-
sion/reception cannot be per-
formed from a PC connected
with a USB cable.
The operation on the left is
performed in the super sleep
mode.
Turn the power of the equipment OFF and
then back ON, and perform it again.
If this equipment is connected to your PC
with a USB cable, change the setting so
that it does not enter the super sleep
mode.
P.134 “Energy Saving Mode Setting”
Phenomenon Usual cause Countermeasure
Phenomenon Usual cause Countermeasure
“Toner is low” appears on the
display.
There is only a little toners
remaining in the toner car-
tridge.
There is still some toner in the toner car-
tridge. Do not replace the toner cartridge
until “Toner empty” appears.
“Toner empty” appears on the
display.
The toner in the toner car-
tridge has run out.
Replace the toner cartridge with a new
one.
“Toner not recognized”
appears on the display.
The toner cartridge is not
installed. Or it is not installed
correctly.
Install the toner cartridge correctly.
A toner cartridge not recom-
mended by TOSHIBA is
being used.
If you are using a toner cartridge other
than the one we recommend, the equip-
ment may not be able to detect whether it
is installed or not.
P.15 “Recommended toner cartridges”
“Toner is low” does not
appear on the display,
although toner is nearly
empty.
A toner cartridge not recom-
mended by TOSHIBA is
being used.
P.15 “Recommended toner cartridges”
The equipment does not
become ready for copying
after the toner cartridge is
inserted.
The toner cartridge inserted
is not usable for this equip-
ment.
Check the product name of the toner car-
tridge. If you can see “T-1810”, this car-
tridge is usable.
198


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-studio 212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-studio 212 in the language / languages: English as an attachment in your email.

The manual is 7.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-studio 212

Toshiba e-studio 212 User Manual - Dutch - 228 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info