804403
75
Zoom out
Zoom in
Previous page
1/84
Next page
75
5
Options
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-5005)
A small table for placing originals while the equipment
is being operated.
Installed on the right-hand side of the equipment.
You can place originals that weigh up to 3 kg (6.6 lb).
Accessory Tray (GR-1250)
A tray for placing accessories.
Installed below the control panel.
Ten Key (GR-1260)
Installed on the control panel.
Desk (MH-5005)
A desk for the equipment.
Accessible Arm (KK-2560)
Allows a user in a wheelchair to close the Reversing
Automatic Document Feeder, Dual Scan Document
Feeder, or the Original Cover.
& P.76 “Using the Accessible Arm”
Operator’s Manual Pocket (KK-5008)
Stores the manual.
FAX Unit (GD-1370)
Allows you to use the equipment as a Fax machine. You
can use up to two phone lines by installing two FAX
units.
Installed inside the equipment.
Wireless LAN/Bluetooth Module (GN-4020)
Allows you to print over wireless LAN and Bluetooth.
You can also use a Bluetooth keyboard.
Installed inside the equipment.
Data Overwrite Enabler (GP-1070)
Erases data stored temporarily when copying or
executing other operation. Overwrites temporarily
stored data with random data.
IPsec Enabler (GP-1080)
Allows you to use the IPsec function.
Hardcopy Security Kit (GP-1190)
Allows Hardcopy Security Printing and you can track
the security pattern information.
Meta Scan Enabler (GS-1010)
Allows you to use the Meta Scan function.
External Interface Enabler (GS-1020)
Allows you to use the EWB function.
Unicode Font Enabler (GS-1007)
Allows you to print from the SAP environment using
Unicode font.
OCR Enabler (GS-1080, GS-1085)
Allows you to use the OCR function.
Multi Station Print Enabler (GS-1090, GS-1095)
Allows you to use the Multi Station Print function.
Printer Scanner Enabler (GM-2280)
Allows you to use the print and scan functions for
e-STUDIO2508A/3008A/3508A/4508A/5008A.
USB Hub (GR-1270)
Use this when the Wireless LAN/Bluetooth Module is
installed in the e-STUDIO2000AC/2500AC or
e-STUDIO2008A/2508A/3008A.
FIPS Hard Disk Kit (GE-1230)
You can use hard disks that comply with the Federal
Information Processing Standard (FIPS140) of the
U.S.A.
Depending on the model, options may already be installed and available.
Some options may not be available in some regions.
14. Inner Finisher (MJ-1042)
Allows sort/group finishing and stapling. The
Hole Punch Unit can be installed.
15. Hole Punch Unit (MJ-6011 Series)
Allows you to punch holes on printed sheets.
Install it in the Inner Finisher.
16. Hole Punch Unit (MJ-6105 Series)
Allows you to punch holes on printed sheets.
Install it in the Finisher or the Saddle Stitch
Finisher.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-Studio 2008a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-Studio 2008a in the language / languages: English as an attachment in your email.

The manual is 18.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info