804410
150
Zoom out
Zoom in
Previous page
1/182
Next page
6 TROUBLESHOOTING
148 When This Message Appears
When This Message Appears
A message appears when a problem occurs on the equipment. Find the message on the list below and follow the
instructions in the Countermeasure.
Message Meaning Countermeasure
MISFEED xxxx An error code “xxxx” and a message
for solving the problem are displayed.
Remove any misfed paper.
P.149 “Paper Misfeed”
CLOSE *** Any cover of the equipment indicated
by “***” is not securely closed.
Close the cover securely.
DRAWER * EMPTY The paper in a drawer indicated by “*”
has run out.
Load paper in the drawer.
P.22 “Loading paper in the drawer/Paper Feed Unit”
COUNT OVER The number of pages scanned has
exceeded the maximum value.
Select “PRINT” on the LCD screen to copy the data scanned
so far. Select “CANCEL JOB” to delete all the data scanned so
far.
CALL FOR SERVICE xxxx The repair or adjustment by your
service technician is needed.
Contact your service representative.
Give the service technician the error code (consisting of
letters and numbers) that appears in the upper right area of
the LCD screen.
Never attempt to repair, disassemble or modify the
equipment by yourself.
This could cause an electric shock, a fire or serious injury.
Contact your service representative when the equipment is in
an abnormal condition or any malfunction is found.
MAINTENANCE The maintenance by your service
technician is needed.
Contact your service representative.
BYPASS EMPTY Paper set on the bypass tray has run
out.
Load paper on the bypass tray.
P.27 “Loading paper on the bypass tray”
TONER IS LOW There is only a little toner remaining in
the toner cartridge.
There is still a little toner remaining in the toner cartridge. Do
not replace the toner cartridge until “TONER EMPTY” appears
on the LCD screen.
yThe message may not appear because the toner
remaining in the cartridge does not lie evenly.
yWhen the message appears, it is advisable to
purchase a new recommended cartridge to prepare
for its replacement.
ERROR : TONER The toner cartridge is not installed
correctly.
Install the toner cartridge correctly.
The recommended toner cartridge is
not being used.
If you are using a toner cartridge other than the one we
recommend, the equipment may not be able to detect whether
it is installed or not.
P.3 “Recommended toner cartridges”
TONER EMPTY The toner in the toner cartridge has
run out.
Replace the toner cartridge with a new one.
P.158 “Replacing Toner Cartridge”
MEMORY IS FULL
PRESS ANY KEY
The built-in memory of the equipment
has become full.
Press any button on the control panel to delete the scanned
data.
CLEAR PAPER OUTPUT
TRAY
PRESS [START] KEY
Approx. 100 maximum sheets of
paper have continuously exited and
the equipment stops copying to
prevent the copied paper from
overflowing from the tray.
Remove the paper from the receiving tray, and then press
[START] to resume copying.
Press [CLEAR/STOP] to end the copy. When “MEMORY
CLEAR?” appears on the LCD screen, select “YES”, and then
press [START].
SET xxx The paper size setting is incorrect. Make sure the loaded paper size/type and setting on the
control panel.
PLEASE WAIT
ADMINISTERED BY PC
TopAccess has been closed by
clicking [X] (Close) on the browser
window instead of [Logout] by a user
who logged in as an administrator
(Admin).
Turn the equipment power OFF and back ON, or wait until the
time set with TopAccess for [Web General Setting] – [Session
Timer] passes (default: 10 minutes).
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 2007 in the language / languages: English as an attachment in your email.

The manual is 19.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 2007

Toshiba e-STUDIO 2007 User Manual - German - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info