681687
45
Zoom out
Zoom in
Previous page
1/75
Next page
Troubleshooting
9.
7
Printing quality problems
If the inside of the machine is dirty or paper has been loaded
improperly, you may notice a reduction in print quality. See the
table below to clear the problem.
Condition Suggested solutions
Light or faded
print
If a vertical white streak or faded area appears on
the page:
The toner supply is low. You may be able to
temporarily extend the toner cartridge life. See
page 8.3. If this does not improve the print
quality, install a new toner cartridge.
The paper may not meet paper specifications; for
example, the paper is too moist or too rough. See
page 3.2
.
If the entire page is light, the print resolution
setting is too low or the toner save mode is on.
Adjust the print resolution and turn the toner save
mode off. See the
Software Section
and
page 2.6, respectively.
A combination of faded or smeared defects may
indicate that the toner cartridge needs cleaning.
See page 8.2.
The surface of the LSU part inside the machine
may be dirty. Clean the LSU. See page 8.2.
Toner specks
The paper may not meet specifications; for
example, the paper is too moist or too rough. See
page 3.2
.
The transfer roller may be dirty. Clean the inside
of your machine. See page 8.1.
The paper path may need cleaning. See page 8.2.
Dropouts
If faded areas, generally rounded, occur randomly
on the page:
A single sheet of paper may be defective. Try
reprinting the job.
The moisture content of the paper is uneven or
the paper has moist spots on its surface. Try a
different brand of paper. See
page 3.2
.
The paper lot is bad. The manufacturing
processes can cause some areas to reject toner.
Try a different kind or brand of paper.
If these steps do not correct the problem, contact
a service representative.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Vertical lines
If black vertical streaks appear on the page:
The drum inside the toner cartridge has probably
been scratched. Remove the toner cartridge and
install a new one. See page 8.4.
If white vertical streaks appear on the page:
The surface of the LSU part inside the machine
may be dirty. Clean the LSU (see page 8.2).
Gray background
If the amount of background shading becomes
unacceptable:
Change to a lighter weight paper. See
page 3.2
.
Check the machine’s environment: very dry (low
humidity) or high humidity (higher than 80% RH)
conditions can increase the amount of background
shading.
Remove the old toner cartridge and install a new
one. See page 8.4.
Toner smear
Clean the inside of the machine. See page 8.1.
Check the paper type and quality. See page 3.2.
Remove the toner cartridge and install a new one.
See page 8.4.
Vertical repetitive
defects
If marks repeatedly appear on the printed side of
the page at even intervals:
The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the toner
cartridge; see page 8.2. After the printout, if you
still have the same problems, remove the toner
cartridge and install a new one. See page 8.4.
Parts of the machine may have toner on them. If
the defects occur on the back of the page, the
problem will likely correct itself after a few more
pages.
The fusing assembly may be damaged. Contact a
service representative.
If you use inferior quality paper; see page 8.2.
Condition Suggested solutions
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba e-STUDIO 180s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba e-STUDIO 180s in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba e-STUDIO 180s

Toshiba e-STUDIO 180s Quick start guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info