21430
16
Zoom out
Zoom in
Previous page
1/56
Next page
English - 3130 - English
System Setup
Press the buttons to select Done and then
press OK button to confirm manual setting.
Repeat this procedure from step 5 onwards,
until all the required stations have been stored.
12
To... Then....
Select a Character
Press the button until
the required name character
is displayed (letters, numbers
or “ - ” character)
Move to the next or
Press the
¥buttons
previous character
respectively.
10
If you.. Then....
Wish to store the
• Press the
buttons until
station displayed the MFT is selected.
• Press the
¥buttons to
adjust the picture, if neces-
sary.
Select Done to store the station.
Do not wish to store
• Press the
buttons until
the station displayed
the CH is selected.
• Press the
¥buttons to
go on scanning the frequen-
cy band and display the
next station.
• Go back to the beginning of
step.
11
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
At the wrong programme positiom you can cancel it.
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK button to select.
3
Select “Manual Setup”
Using the buttons, move the selection bar
to “Manual Setup” then press
or OK button to
select.
4
Programme
System Setup
To change the programme’s name, press the
button. The first letter of the name flashes.
9
Press the buttons until the NAME is select-
ed. The station name is set automatically from
the broadcast signal.
8
Presetting the Stations
Manually
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK button to select.
3
Select “Manual Setup”
Move the selection bar to “Manual Setup”, using
the
buttons then press or OK button to
select.
4
Press the buttons to select a PR number
as required then press
or OK button to select.
5
Press the  button to select Edit.
Then press
or OK button to be displayed
“Manual Setup” menu.
6
Press the ¥buttons to start scanning the
channels.
The frequency band is scanned and the first sta-
tion found is displayed.
7
Programme
Edit
Delete
Swap
Decoder
If you have already set then automatically, you do not
need to preset the stations manually.
Manual Setup
PR
CH
Name
01
Done
- - -
- - - - - -
- - - -
Decoder Off
MFT
TV System : G
36
Programme
Manual Setup
PR
CH
Name
01
2
Done
- - - - - -
A - - -
MFT
Decoder Off
: Ch 36
TV System : G
Programme
If you wish to cancel the auto scanning before the
end, press the OK button.
• The time and date are set automatically from
the broadcast signal. If the signal is weak or
ghosting occurs, the time and date may not be
set automatically.
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required.
8
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DVR3SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DVR3SG in the language / languages: English as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba DVR3SG

Toshiba DVR3SG User Manual - German - 58 pages

Toshiba DVR3SG User Manual - Spanish - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info