31135
110
Zoom out
Zoom in
Previous page
1/144
Next page
110
Editing
DV Recording (Recording from a digital video camera) (Continued)
Notes
The DV terminal of this recorder supports only input from a
DV format digital video camera. It cannot output to a
connected device. Some models of DV format digital video
cameras may be not compatible.
At step 5, you can enlarge a thumbnail by selecting Full
Display, then pressing the ENTER button.
If DV Chapter Create is set to Off and you record onto a
DVD-R/RW disc, chapters are automatically made
according to the DVD-Video: CHP Create setting
( page 130). The number of chapters has the limit.
Chapters are divided with a margin of about 0.5 second or
less according to the DVD-Video standard.
DV recording does not start in the following cases:
- While recording or in the time slip mode.
- While operating a REC MENU, CONTENT MENU or
LIBRARY MENU.
- If the recorders clock is not set yet.
- Within 5 minutes before a programmed recording starts, or
during a programmed recording is being executed.
If a DV recording overlaps with a programmed recording,
the DV recording will stop 5 minutes before the
programmed recording starts, and the programmed
recording will be executed.
DV recording does not work if the DV terminal is connected
equipment other than DV format digital video camera, such
as a PC.
Depending on the connected DV format digital video
camera, the display at step 5 may not show Manufacturer
or Equipment.
If the DV terminal is connected more than one DV format
digital video camera, DV recording may not work properly.
For proper functioning of DV recording, connect only one
device to the DV terminal.
Keep the DV terminal not connected unless you record
from a DV format digital video camera, as it may give
influence on the recorder if operated.
If you start a recording and do not operate for about 15
minutes, the display switches to the full mode, when
Screen Protector ( page 127) is set to On. Pressing
the ENTER button while Detail Display is selected can
restore the previous display.
•“DV Chapter Create is not available when recording to a
DVD-RAM disc.
To record stereo sound from the connected DV format
digital video camera, connect it to the INPUT 1 jacks using
compatible cables such as supplied audio/video cables.
To record stereo sound from the connected DV format
digital video camera, connect it to the input jacks using
compatible cables such as supplied audio and video
cables. ( page 36)
If a DV format digital video camera is not recognized, pull
out the plug and connect it again.
Some models of DV format digital video cameras may
support a different compression format. From such
equipment, recording is not possible.
Depending on the models of DV format digital video
cameras, recording may not work properly or some
functions may be disabled.
On an input source from a DV tape which is partly recorded
over, DV Chapter Create may not work properly.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DR1SU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DR1SU in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info