31135
40
Zoom out
Zoom in
Previous page
1/144
Next page
40
Programming a recording (REC MENU) (Continued)
Recording
A timer program with this mark will be executed. To disengage, put it
off.
Select a channel you want to record.
Select a date of a TV program you want to record.
Enter a starting time of recording. (An initial setting is 10 minutes later.)
You can also use the number buttons under the lid.
Enter an end time. (Set the timer to begin recording no sooner than 2
minutes past the current time.)
You can also use the number buttons under the lid.
Fixed. (Unselective.)
Standard setting of recording time and picture quality. (Not applicable
when L-PCM is selected.)
For longer recording, but inferior to SP in picture quality. (Not
applicable when L-PCM is selected.)
Customized setting of rate (bit rate).
To set a rate automatically according to the remaining volume of the
disc. (If the disc does not have room for the TV program, the program
cannot be recorded to the end.)
Not applicable when SP, LP or Auto is selected. You can set a rate
at intervals of 0.2Mbps from 2.0 to 9.2. (The upper limit of the value
depends on the Sound Quality setting.)
Standard setting.
Superior to D /M1. Recommended for recording music programs.
Uncompressed original digital audio. Equal quality to audio CD, but
recordable time will be shorter.
A programmed recording onto a Reservation Disc is marked with an
icon.
Setting items
The digital recording technology for consumer products of Dolby Laboratories is used for D /M1 and D /M2.
Dolby Digital 192 kbps is set for
D /M1 and Dolby Digital 384 kbps for D /M2.
Notes
•“Start and End accept time up to 30:59. If you enter a time over 24:00 and press the ENTER button. Date will gain one
day, and the time will be corrected to 0:00 - 6:59.
See page 50 for details on Mode, Rate, and Audio.
VCR Plus+ programming is also available. See page 46.
If you record with setting Rate to about 4.0 Mbps or below, the recorded pictures may not be played properly if change the
playback speed. There will be noise, and the picture quality is lower than other rate settings.
Do not change the TV/CATV selection of the Initial Settings while a recording is programmed. If you want to change it,
cancel the program recording. After then, make the programing again if necessary.
Exec
CH
Date
Start*
End*
Media
Mode
(Picture
Quality)
Rate
(Bit Rate)
Audio
Disc
1-125, L1-L3
Every Sunday to Saturday, Monday
to Thursday, Monday to Friday,
Monday to Saturday, everyday.
0:00 30:59
0:00 30:59
DVD
SP
LP
Manual
Auto
1.4, 2.0-9.2
D /M1
D /M2
L-PCM
* If you set summer time on the clock of the recorder, see the
notes on page 31 in the INSTALLATION GUIDE.
Notes
The disc tray does not close automatically, even when the recording start time comes. Set the recorder loaded an available
DVD-RAM/R/RW disc beforehand.
When there are little time before a programmed recording starts, you may not be able to start another recording.
DVD-RAM disc playback pauses when a programmed recording starts.
Confirm the DVD Video Compatibility setting. Main or SAP records main sound or sub-sound of multiplex broadcasts
respectively, and does not record the other. Therefore, select Main or SAP only when you record onto a DVD-R/RW disc.
When recording onto a DVD-R/RW disc, set DVD Video Compatibility ( page 130) to the desired recording sound for
each timer program.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DR1SU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DR1SU in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info