31135
29
Zoom out
Zoom in
Previous page
1/144
Next page
29
Playback
Recording
Editing
Function setup
Others
Introduction
Library
DVD-RAM Physical Format
Physical formatting is a simple execution for a disc which
cannot be used or read (or which is becoming hard to
read). It may refresh such a disc for recording and
playback. (There is no guarantee that all such discs will
be recovered.)
DVD-RAM logical format process only rewrites certain
data on file system and management information,
however, DVD-RAM physical format rewrites all data on
a disc, therefore it takes a much longer time to complete.
For a 4.7GB single sided DVD-RAM, about 70 minutes
will be necessary. While processing, all recorder
operations and functions including program recording will
not work until the process is finished. Also this process
erases all data stored on the DVD-RAM disc.
Notes
The physical format process may fail if executed to a dirty
DVD-RAM disc. Also, the disc may be difficult to record,
even if it finished. Before executing DVD-RAM physical
format process, be sure to confirm the disc is not dirty.
Clean it if necessary. If the disc has scratches or dust
beyond cleaners efficacy, do not execute DVD-RAM
physical format process on the disc.
The following DVD-RAM discs require physical formatting:
A disc which is not formatted correctly.
The disc which has errors during writing because of dirt
on the disc, and cannot be further recorded, or cannot
initialize normally.
You need to start physical formatting from the first step
again when you use a failed disc.
Physical formatting does not work if the disc contains a lot
of void beyond limitation of this recorder.
If an error occurs in physical formatting, ERR-01 appears
in the front panel display. To turn off the message, press
the DISPLAY button.
4) Press the / buttons to select Start, then
press the ENTER button.
5) Press the
/ buttons to select Start, then
press the ENTER button.
Initialization starts.
When initialization is completed, the setup window
disappears.
Disc format
0
DV D Format
Start
Entire disc contents excluding
library data will be erased if
disc is formatted. Proceed?
Cancel
%
18
DV D Format
Start
Cancel
Disc format
DVD
Formatting
%
1) During stop, press the SETUP button.
2) Press the
/ buttons to select Management
Settings then press the ENTER button.
3) Press the
/ buttons to select DVD-RAM
Physical Format, then press the ENTER
button.
4) Press the
/ buttons to select Yes, then
press the ENTER button to execute.
To cancel, select No, then press the ENTER
button.
5) Read the message, and press the
/ buttons
to select Yes or No, then press the ENTER
button.
Yes
No
Warning: It will take approximetely
70 minutes to format a 4.7GB
DVD-RAM and all data will be erased.
Confirm t
hat timer programing is not
scheduled.
Procceed?
Management Settings
Use
DVD Drive Software
SETUP
TV
Eco. Mode
Software Version
DVD-RAM Physical Format
Genre Setting
Auto
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DR1SU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DR1SU in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info