215032
24
Zoom out
Zoom in
Previous page
1/36
Next page
Using the projector and remote control 24
3. Select the second signal input from the Display > PIP or Display > POP menu.
4. You can press the SWAP button on the remote control repeatedly to switch the corresponding
positions of the two windows, .
5. Between the two images, the bigger one of PIP or the left one of POP is always the active
window. You can change the input signal settings in the active window only.
6. To adjust the size of the PIP window, press + or -.
7. To adjust the position of the PIP window, press the ARROW buttons (c/e/d/f).
8. To turn off the PIP or POP function, push PIP or POP button again.
PIP ---
POP ---
Q If the selected input signal is not available, the image will be black.
Q If you are using this function on commercial video software or on a broadcast or cable broadcast
except for the purpose of your private viewing and listening, it may infringe the copyright protected
by the copyright laws.
Q When the PIP/POP function is activated, some of the Faroudja functions may not be available.
Pausing the picture
To pause the picture, press the FREEZE button on the remote control. Pressing the FREEZE button
again cancels the freeze function.
Q The icon will appear while Freeze is in effect.
Q Even if an image is frozen on the screen, the pictures are running on the video or other device. If
the connected devices have active audio output, you will still hear the audio even though the
image is frozen.
Q Using the Freeze function on commercial video software or on a TV or cable broadcast for any
purpose other than your private viewing may be prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil and criminal liability.
Turning the power off
Follow the steps below.
1. Press the ON/STANDBY button on the projector or remote
control. A confirmation message will appear. To turn off the
projector, press ON/STANDBY again.
2. The Power indicator light will flash green and the fans will run
for about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is
complete.
3. The Power indicator light will be a solid (non-flashing) orange
when the cooling process has finished and fans stop.
4. If the projector will not be used for an extended period, turn off
the main power switch and unplug the power cord from the
power outlet.
Q If you accidentally press the ON/STANDBY button and do not
want to turn off the power, wait until the confirmation message
disappears.
+
-
+
-
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba beamer mt 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba beamer mt 700 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info