215031
11
Zoom out
Zoom in
Previous page
1/23
Next page
2120
Operations
English Français Español Deutsch Italiano
Português
Svenska
Turning the power on
1
Turn on the main power switch
The ON indicator will change to
orange, indicating standby mode.
After the main power switch is turned
on, the inner cooling fan starts
cooling.
2
Press the ON/STANDBY
button.
The power turns on, and the following
3 green indicators light: ON, LAMP,
and FAN. After a moment, the start-up
screen appears.
(Orange)
p.43
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
p.39
, etc.
•Turn off the power of both devices before connecting.
The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Notes
If you want to feed the digital RGB signal, separately available DVI cable is needed.
If you are using the digital RGB signal for input to this unit, some computer models or a
certain type of DVI cable may cause on rare occasions noise on the screen. If such is a
case, decrease your computer’s refresh rate or the resolution. It is also recommended to
use a DVI cable in 2 m or less in length.
Connection
Computer (for control)
VCR, etc
Video recorder,
DVD player, etc.
To RS-232C
terminal
Control cable
To video
output
Video cable (supplied)
To S-Video
output
S-Video cable
(supplied)
RGB component video cable
(not supplied)
To Y / C
B/CR output
Green (Y)/Blue (C
B)/Red (CR)
DVI cable
(not supplied)
To RGB output
Computer
DVD video recorder, etc.
Computer
RGB cable
(not supplied)
To DVI output
Connecting the power cord
1
Insert the power cord connector into the
AC IN socket of the projector.
2
Insert the power cord plug into a wall or
other power outlet.
Start-up screen
Control panel
Remote
Control
Power cord connector
(Supplied)
CAUTION
Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
Turning the power on and off
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba beamer mt 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba beamer mt 400 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info