456109
65
Zoom out
Zoom in
Previous page
1/106
Next page
65
Chapter 8: Advanced features
Setting up the Network
You can select the Network Type.
1 > Settings > PREFERENCES > Network
Setup > .
(Another: > Network > Network Setup > .)
2 Press B or b to highlight Network Type.
3 Press C or c to select Wired or Wireless.
4 If you select Wired, see “Advanced Network Setup
(- p. 67).
If you select Wireless, see the next section.
Wireless Setup
Note:
Continued AP (Access Point) connection is not
guaranteed. Connection may be lost while watching TV.
There are 3 methods for wireless setup:
Easy Setup (WPS)
If AP supports WPS, this can be used.
WPS is a standard designed to simplify the
connection of wireless LAN equipment and the setup
of network security features.
Assisted Setup (setup using the AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1 > Settings > PREFERENCES > Network
Setup > .
2 Press B or b to select Wireless Setup. Press .
3 Press B or b to select Easy Setup. Press .
4 Press C or c to select PBC.
5 Press b to select Start Scan. Press .
6 Following the onscreen instructions, push the
appropriate button on your AP.
7 When a screen reporting that the setup has
succeeded appears, press .
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press C or c to select Yes. Press .
Easy Setup using PIN (Personal Identification
Number)
1 > Settings > PREFERENCES > Network
Setup > .
2 Press B or b to select Wireless Setup. Press .
3 Press B or b to select Easy Setup. Press .
4 Press C or c to select PIN.
5 Press b to select Start Scan. Press .
6 Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7 Press B or b to select the desired AP. Press .
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
8 When a screen reporting that the setup succeeded
appears, press .
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press C or c to select Yes. Press .
Assisted Setup
1 > Settings > PREFERENCES > Network
Setup > .
2 Press B or b to select Wireless Setup. Press .
3 Press B or b to select Assisted Setup. Press .
4 Press B or b to select the desired AP. Press .
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
5 Select Security Key. Press . The Software
Keyboard appears.
6 Input the Security Key using the Software Keyboard
(- p. 68). To save your settings, press the BLUE
button.
Note: The Security Key must adhere to these
conditions:
-TKIP/AES: 8-63 ASCII or 64 Hex characters
-WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7 Select Done. Press .
Note: Settings are not saved if is pressed before
Done is selected.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 65UL610U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 65UL610U in the language / languages: English as an attachment in your email.

The manual is 28,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info