456111
17
Zoom out
Zoom in
Previous page
1/106
Next page
17
Chapter 2: Connecting your TV
Connecting an HDMI
®
or DVI device to the HDMI input
HDMI
OUT
DVI/HDCP
OUT
AUDIO
R
L
OUT
TV back panel
HDMI device
DVI device
HDMI cable
Audio cable
HDMI-to-DVI adapter cable
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source
device, or uncompressed digital video from a DVI
(Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from EIA/CEA-861-D
compliant[1] consumer electronic devices (such as a set-
top box or DVD player with HDMI or DVI output).
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), 1080p (24Hz/60Hz). For signal specifications,
see p. 86.
Supported Audio format: Linear PCM, sampling rate
32/44.1/48 kHz.
Note:
To connect a PC to the HDMI input, see p. 22.
Some legacy HDMI sources may not work properly with
your HDMI TV, due to the adoption of new standards. Try
the HDMI setting to Off (- p. 45).
To connect an HDMI device, you will need:
one HDMI cable per HDMI device
Recommendation: For proper operation, use an
HDMI cable with the HDMI Logo ( ).
To display an 1080p/60 Hz signal format, you need a
High Speed HDMI cable. Conventional HDMI/DVI
cable may not work properly.
HDMI cable transfers video and audio. Separate
analog audio cables are not required.
See “Setting the HDMI audio mode” (- p. 45).
To view the HDMI device video:
Press + and B or b to select the HDMI 1, HDMI 2,
HDMI 3 or HDMI 4.
Note: To program the TV remote control to operate other
devices, see p. 91.
To connect a DVI device, you will need:
•One HDMI-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable must not exceed 9.8 ft (3m).
Recomended length: 6.6 ft (2m).
One 3.5mm Stereo to RCA Y-Cable
Analog audio for HDMI is only available on HDMI 3
and HDMI 4. Configuration is needed. See p. 31, 45.
An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required.
Note: To ensure that the HDMI or DVI device is reset
properly:
To turn on electronic components, turn on the TV first
and then the HDMI or DVI device.
To turn off electronic components, turn off the HDMI or
DVI device first and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for
reception of high-definition video signals. Because this is
an evolving technology, it is possible that some devices
may not operate properly with the TV.
WX800U_EN.pdf 17 2010/08/11 10:14:50
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 55WX800U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 55WX800U in the language / languages: English as an attachment in your email.

The manual is 22,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info