458631
77
Zoom out
Zoom in
Previous page
1/102
Next page
77
Chapter 9: Troubleshooting
General troubleshooting
Before calling a service technician, please check this
chapter for a possible cause of the problem and some
solutions you can try.
Black box onscreen
The closed caption feature is set to one of the Text modes
(T1, T2, T3, or T4). Set the closed caption feature to Off
(- p. 42).
TV stops responding to controls
If the TV stops responding to the remote control or TV control
panel and you cannot turn off the TV, unplug the power cord
to reset the TV. After 1 minute, plug it in and turn the TV on.
Other problems
If your TV’s problem is not addressed in this Troubleshooting
section or the recommended solution has not worked, do one
of the following:
1) Turn off your TV. After 30 seconds, turn it on.
2) Turn off the TV and unplug the power cord. After 1 minute,
plug the power cord in and turn
on the TV.
3) Perform the Reset Factory Defaults procedure (- p. 51).
TV will not turn on
Ensure the power cord is plugged in. Press .
Replace the remote control’s batteries.
Try the control panel buttons.
3D problems
Watch the TV at proper viewing angle and distance (- p. 7).
If 3D images are not correct, the 3D format may be different.
Change the 3D format from Quick menu (- p. 36).
The left and right sides of 3D images may be reversed. Switch
the left and right (- p. 38).
If 2D images are not correct, the 2D format may be different.
Change the 2D format from Quick menu (- p. 36).
Picture problems
General picture problems
Check the antenna/cable connections (- p. 16).
Press on the remote control or on the TV and select a
valid video input source (- p. 41). If no device is connected
to an input on the TV, nopicture appears when you select that
particular input source. Check device connections (- p. 17–
23).
Antenna r
eception may be poor. Use a highly directional
outdoor antenna (if applicable).
The station may be having broadcast difficulties. Try another
channel.
Adjust the picture quality (- p. 55).
If Edge Enhancer does not achieve a sharper picture, change
the Sharpness value to increase the sharpness level
(
- p. 55).
Video Input Selection problems
If the Input Selection window does not appear when you
press on the remote control or the TV control panel,
press a second time. The TV displays the next video
input source and the Input Selection screen.
Cannot view external signals or channel 3 or 4
If you cannot view signals from external devices connected to
VIDEO 1, VIDEO 2, ColorStream HD1, ColorStream HD2,
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC, or from channel 3 or
4, ensure the Input Lock is set to Off (- p. 45).
Poor color or no color
The station may be having broadcast difficulties. Try another
channel.
Check the Input mode when you use Shared Inputs
(- p. 32).
Adjust the Tint and/or Color (- p. 55).
Poor composite picture
If the TV is connected to an external A/V device (e.g. DVD
player, video game system, set-top box, etc.) try using a
ColorStream or HDMI video connection instead.
Picture and sound are out of sync
As with all products that contain a digital display, this may
occur in rare instances, when viewing certain content (e.g.
television broadcasts, video games, DVDs). The cause may
include, without limitation, video processing within the TV,
video processing in an attached gaming system, and video
proce
ssing or different compression rates used by
broadcasters in their programming. Try these procedures:
If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to
help synchronize the sound to the picture.
If the problem occurs only on ce
rtain TV channels, inform
your local broadcast, cable, or satellite provider.
The settings of Side Shared Audio and Rear Shared
Audio may be not correct. Ensure the settings (- p. 32).
Sound problems
Check the antenna/cable connections (- p. 16–22).
The station may be having broadcast difficulties. Try another
channel.
The sound may be muted. Press VOLUME.
If you hear no sound, try setting the MTS feature to
Stereo mode (- p. 59).
If you are not receiving a second audio program f
rom a
known SAP source, make sure the MTS feature is set to SAP
mode (- p. 59).
If you hear audio that seems incorrect for the program you
are watching (such as music or a foreign language), the SAP
mode may be on. Set the MTS feature to Stereo mode
(- p. 59).
If you connect a PC using either the PC IN termi
nal or an
HDMI terminal, ensure that the Rear Shared Audio setting is
properly set (- p. 49).
POWER
(continued)
77


Need help? Post your question in this forum.

Forumrules
1

Forum

toshiba-55tl515u

Reset search

  • we replaced the main circuit board on the toshiba 55tl515u whats up with the to upper wires one is white and one in black on left and right top sides..the tv still inop Submitted on 7-10-2022 at 21:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 55TL515U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 55TL515U in the language / languages: English as an attachment in your email.

The manual is 27,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info