646841
88
Zoom out
Zoom in
Previous page
1/102
Next page
88
PROBLEM SOLVING
English
Picture
Why are the colours wrong when an
NTSC source is played?
Connect the source via a SCART lead and play.
Select Colour System from the Setup menu.
a Set the Colour to Auto and exit.
b Go to the Picture menu and adjust the tint.
General
Why don’t the controls of the television
work?
Check that Panel Lock is not On.
Why doesn’t the remote control work?
Check that batteries aren't exhausted or inserted incorrectly
Why is the digital channel locked?
The channel has been locked in Channel Options (see ’Digital settings –
Channel Options’ section).
Why are some of the digital subscription
channels unavailable?
Your subscription needs upgrading. Contact your service provider.
What is DVB-T?
Digital Video Broadcast via an aerial/antenna.
What is DVB-C?
Digital Video Broadcast via a cable connection.
How are DTV radio channels selected?
Select from All Channel List (LIST button).
What can be done if the PIN number has
been forgotten?
Use the Master PIN code of 1276, then change to a number of your choice.
Select Parental PIN Setup from the DTV Settings menu to enter PIN.
Ensure that no-one else can use the Master PIN by removing the Owner’s
Manual.
Why when digital subtitles have been
selected are they not showing on screen?
Subtitles are not currently being transmitted by the broadcaster.
Why are there problems with analogue
text?
Good performance of text depends on a good strong broadcast signal. This
normally requires a roof or loft aerial. If the text is unreadable or garbled,
check the aerial. Go to the main index page of the text service and look for
the User Guide. This will explain the basic operation of text in some detail. If
further information is needed on how to use text see the text section.
Why is a page number visible at the top
of the screen but no text?
Text has been selected but Teletext information is currently unavailable on
the current source.
Why don’t the devices connected via
HDMI operate properly?
Make sure to use cables with the HDMI logo (see page 9).
Some early HDMI equipment may not work properly with the latest HDMI
TV products, due to new standard adoption.
Why don’t the HDMI CEC Control
devices work?
When the connected HDMI CEC Control device does not work correctly after
you have changed the settings of the device, turn off your television and
unplug the power cord, and then plug and turn on again. Unplug the HDMI
cable of the HDMI CEC Control device and lead again.
Why is the HDMI CEC logo still
showing when the equipment has been
disconnected?
If the HDMI CEC Control device is disconnected, the logo will disappear after
approximately one minute.
Why don’t the networked devices work?
The LAN cables are not connected properly or at all. Connect all cables (see
page 12).
Make sure your network address is set up correctly (see page 46).
Why doesn’t the wireless network work?
Check that the AP is powered on.
Why doesn’t the Media Player feature
operate?
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub connection.
Check your network setup if using DLNA CERTIFIED™ Server.
Question Answer
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 47WL968 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 47WL968 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 47WL968

Toshiba 47WL968 User Manual - German - 102 pages

Toshiba 47WL968 User Manual - Dutch - 102 pages

Toshiba 47WL968 User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info