698396
23
Zoom out
Zoom in
Previous page
1/35
Next page
English - 22 -
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock
if Automatic scanning option is set to  and if
the TV is connected to an aerial signal or to Internet. If
a new software is found and downloaded successfully,
it will be installed at the next power on.
Note: Do not unplug the power cord while led is blinking during
the reboot process. If the TV fails to come on after the upgrade,
unplug, wait for two minutes then plug it back in.
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
version.

TV will not turn on
Make sure the power cord is plugged in securely to a
wall outlet. Press the Power button on the TV.
Poor picture
 Check if you have correctly tuned the TV.
 Low signal level can cause picture distortion. Please
check antenna connections.
 Check if you have entered the correct channel
frequency if you have performed manual tuning.

 TV is not receiving any signal. Make sure the correct
source has been selected.
 Is the antenna connected properly?
 Is the antenna cable damaged?
 Are suitable plugs used to connect the antenna?
 If you are in doubt, consult your dealer.

 Check if the TV sound is muted. Press the Mute
button or increase the volume to check.
 Sound is coming from only one speaker. Check the
balance settings from Sound menu.
Remote control - no operation
 The batteries may be exhausted. Replace the
batteries.
 The batteries maybe inserted incorrectly. Refer to
the section “Inserting the Batteries into the Remote”.

 It is possible that no device is connected.
 Check the AV cables and connections from your
device.
 Check the device is switched on.

To record a programme, you should first correctly
connect a USB storage device to your TV, while the
TV is switched off. You should then switch on the TV
to enable the recording feature. If you cannot record,
check the storage device is correctly formatted and
there is sufficient space.
USB is too slow
If a “USB storage device writing speed too slow to
record” message is displayed on the screen while
starting a recording, try restarting the recording. If you
still get the same error, it is possible that your USB
storage device does not meet the speed requirements.
Try using a different USB storage device.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 43VL3A63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 43VL3A63 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 43VL3A63

Toshiba 43VL3A63 User Manual - German - 39 pages

Toshiba 43VL3A63 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info