45983
59
Zoom out
Zoom in
Previous page
1/74
Next page
59
XV540U (E/F) Web 213:276
Chapter 6: Using the TV’s features
To set the REGZA-LINK Setup:
1 From the Setup menu, highlight REGZA-LINK Setup
and press T.
2 Press B or b to highlight Enable REGZA-LINK.
3 Press C or c to select On.
Note: if you set Enable REGZA-LINK to Off, the other
items will be grayed out.
4 Press B or b to highlight the REGZA-LINK setup item
you want to use, and press C or c to select On or desired
mode.
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
5 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Using the HDMI settings feature
This menu consists of the following 3 items (new HDMI
capabilities) and will be grayed out on non-HDMI inputs.
Some HDMI legacy sources may not work properly with your
HDMI TV, please try setting the following options (Lip-Sync
Latency, Deep Color, and x.v.Color) to Off. Adjusting these
settings should allow your HDMI legacy source to operate
properly with your TV.
Note: You must disconnect your source device first before
settings can be adjusted.
Lip-Sync Latency: On
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
Deep Color: On
This feature allows the HDMI source to increase available
colors bits within the boundaries defined by the RGB or
YCbCr color space.
x.v.Color: On
This feature expands the acceptable color range (limits) in
the HDMI signals, then allows sending wider color signals
from HDMI source.
All of the above HDMI settings need proper HDMI source
devices. If an HDMI source device does not support these
features, the TV may not work properly when these features
are enabled.
Note: If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60Hz or
supports Deep Color, you will need a High Speed HDMI cable.
Conventional HDMI/DVI cables may not work properly with this
mode.
To set the HDMI Settings:
1 Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3 or HDMI 4).
2 From the Setup menu, highlight HDMI Settings and
press T.
3 Press B or b to highlight the item you want to set.
4 Press C or c to select On or Off .
5 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
42XV540U_EN.book Page 59 Thursday, March 6, 2008 11:06 AM
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 42XV540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 42XV540 in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info