45983
52
Zoom out
Zoom in
Previous page
1/74
Next page
52
XV540U (E/F) Web 213:276
Chapter 6: Using the TV’s features
Using the StableSound
®
feature
The StableSound
®
feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
®
feature:
1 From the Audio menu, highlight Audio Settings and
press T.
2 In the StableSound field, select On.
3 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound . . Off
Note: This feature will be gray out in digital channels, to turn it
On or Off, it's necessary to be tuned in an analog channel.
To turn off the StableSound feature:
Select Off in step 2 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the DIGITAL AUDIO OUT terminal
on the TV (- “Connecting a digital audio system” on
page 18).
To select the optical audio output format:
1 From the Audio menu, highlight Audio Setup and press
T.
2 In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
3 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Using the Dolby
®
Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
digital to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1 From the Audio menu, highlight Audio Setup and press
T.
2 In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the
audio is output with minimal compression.
3 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
This item will be grayed out for Analog signals, Video,
ColorStream, HDMI, and PC inputs.
The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Control Panel
Lock, GameTimer, and New PIN Code features. You can use
these features after entering the correct PIN code.
Entering the PIN code
1
On the remote control or TV control panel, press Y and
highlight the Locks menu icon.
Input Lock
New PIN Code
Control Panel Lock
Enable Rating Blocking
Channels Block
Off
Off
Off
GameTimer
Off
Edit Rating Limits
Locks
42XV540U_EN.book Page 52 Thursday, March 6, 2008 11:06 AM
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 42XV540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 42XV540 in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info