464756
17
Zoom out
Zoom in
Previous page
1/84
Next page
17
SETTING UP YOUR TV
English
From this menu, you can set the RF input configuration.
a
Press
MENU
, and select
SETUP
menu.
b
Use
b
to highlight
Ant/Cable/Satellite
and use
C
or
c
to select
Antenna
,
Cable
or
Satellite
.
NOTE:
When you attempt to change the
Ant/Cable/
Satellite
setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for
Auto Tuning
.
c
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto
Tuning
screen.
Press
B
or
b
to select an item, and then press
C
or
c
to select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
From the SETUP menu, you can add the satellites that you wish
to tune and configure detailed settings for each one
individually.
To add a satellite:
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
b
Use
b
to highlight
Satellite Settings
. Press
Q
.
c
Press
b
to highlight a new line to add an another
satellite, and press
Q
.
d
Press
b
until the required satellite is displayed and press
Q
.
Ant/Cable/Satellite (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
Satellite Settings
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Movable
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
00GB03Tune.fm Page 17 Tuesday, July 20, 2010 8:43 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 40XV733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 40XV733 in the language / languages: English as an attachment in your email.

The manual is 7,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 40XV733

Toshiba 40XV733 User Manual - German - 73 pages

Toshiba 40XV733 User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info