645389
47
Zoom out
Zoom in
Previous page
1/59
Next page
47
English
HDMI CEC Menus
By activating the Enable HDMI CEC Control feature in the HDMI CEC Control Setup menu, individual HDMI-
LINK features can then be activated.
One Touch Play
The function of HDMI CEC will automatically
power on the television that was in standby mode
and switch the television’s input source to the
port connected with the audio/video equipment
by powering-on or playing from the audio/video
equipment.
NOTE: This feature is dependent on the connected
equipment and television setting.
System Standby
This feature automatically switches the connected
equipment into standby when the television goes
into standby and conversely for the television to
switch into standby when connected equipment goes
into standby. It is selected in the HDMI CEC Control
Setup menu.
NOTE: This feature is dependent on the connected
equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the
television’s remote control to adjust the volume or
mute the sound of the speakers connected to the
television via an AV amplifier.
Ensure that the connected AV amplifier and HDMI
CEC equipment are selected in the input source
selection and that the Initial Speaker Setting is set
to Amplifier in the HDMI CEC Control Setup menu.
NOTE: When the AV Amplifier is switched on,
its input source changed or the volume
adjusted, the sound will be output from the
AV Amplifier’s speakers even if TV speakers
has been selected. Turn the television off
then on again to output the sound from the
TV’s speakers.
The full function may not work and is dependent on
the amplifier being used.
HDMI CEC Control Setup
This feature uses CEC (Consumer Electronics
Control) technology, and allows the control of
Toshiba HDMI CEC compatible equipment from the
television’s remote control.
NOTE: Not all Toshiba products currently support
HDMI CEC.
Equipment Control
The HDMI CEC mode on the television’s remote
control allows the control of connected HDMI CEC
equipment being watched. To control the HDMI CEC
input source, first select the equipment with HDMI
CEC input source selection, then switch the mode
on the remote control to HDMI CEC and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the operation
manual for each piece of equipment connected.
Select HDMI CEC Device
1.
Press . A list appears on screen showing
modes and all stored external equipment.
2.
The HDMI-CEC icon appears automatically after
detected with HDMI CEC compatible equipment.

shown with the HDMI-CEC icon.
3.

appears showing all connected HDMI CEC
equipment.
4.
HDMI
CEC equipment, and then press
to select.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 40D1334 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 40D1334 in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info