464751
15
Zoom out
Zoom in
Previous page
1/73
Next page
15
SETTING UP YOUR TV
English
m
Use
B
or
b
to move through the list to select a
channel, and then press
Q
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
(DTV TV/DTV RADIO/DTV TEXT if
available) modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
From this menu, you can set the RF input configuration to cable.
a
Press
MENU
, and select
SETUP
menu.
b
Use
b
to highlight
Ant/Cable In
and use
C
or
c
to
select
Antenna
or
Cable
.
NOTE:
When you attempt to change the
Ant/Cable
In
setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for
Auto
Tuning
.
c
When
Ant/Cable In
is set to
Cable
, the following
setting options will be provided in the
Auto Tuning
screen.
Press
B
or
b
to select an item, and then press
C
or
c
to select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
* Valid entry range for frequency items is 113.000-
858.00 for C-Book/Other and 114.000-858.00 for
Nordig-C. If numbers outside of this range are
entered, the values will automatically be set to the
min. or max. valid value as appropriate.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
* Valid entry range for Symbol Rate is 4000-7200. If a
number outside of this range is entered, the value will
be automatically set to the min. or max. valid value as
appropriate.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
* Valid entry range for Network ID is 1-65535. If a
number outside of this range is entered, the value will
be automatically set to the min. or max. valid value as
appropriate.
PLEASE NOTE
The
Reset TV
menu can also be accessed at any
time from the
SETUP
menu.
Ant/Cable In (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
RVXVMV73_WebOM_UK.book Page 15 Monday, April 19, 2010 10:46 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 37RV733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 37RV733 in the language / languages: English as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 37RV733

Toshiba 37RV733 User Manual - German - 73 pages

Toshiba 37RV733 User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info