ADDITIONAL FEATURES
24
The timer, time display and panel lock
Stereo/bilingual transmissions
If you press the F button and the
t
button on the
remote control whilst watching a normal TV broadcast,
you will see a very accurate time display showing the
hour, minute and seconds, appear in the top right corner
of the screen.
It will remain on the screen for about 5 seconds.
1
Stereo…
Choose the required programme number.
Press the OI/II button repeatedly, to select
between Stereo and Mono.
1
…and Bilingual
Bilingual transmissions are rare. If they are transmitted
the word Dual will display.
If the word Dual does appear press the
OI/II button to select between Dual 1,
Dual 2 and mono.
1
2
The Timer
Stereo and Bilingual transmissions…
Panel lock allows you to disable the buttons on the front
of the TV set so that channels cannot be changed. You
can though, still use the buttons on the remote control.
From the FEATURE MENU select Panel lock
and choose ON or OFF with the
S
and
R
buttons.
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen,
disappearing after a few seconds. The display will
reappear each time you change programme positions,
provided that the broadcast is in stereo. If the broadcast is
not in stereo the word Mono will appear.
NICAM, MPX
broadcasts can be in
either Stereo or Mono.
You can tell the TV to turn itself ON or OFF after a
certain time.
The time display facility allows you to see the current
time on the TV screen.
EXIT : To exit
Panel Lock
The Time Display
FEATURE MENU
▼▼▼▼▼
▼
▼
▼
▼
▼
AV connection
Picture size/position
Teletext
Surround set up
NexTView set up
Language ENGLISH
Panel lock OFF
When Panel lock
is ON, you will
be reminded on
the screen when
you press any of
the front panel
buttons.
Select the TIMER option from the top menu bar.
Select the Off timer (or the On timer). If, for
example, you want the TV to turn OFF (or ON) in
one and a half hours time, enter 01:30 using the
numbered buttons on the remote control.
When setting the On timer, you must enter the
programme position number you want to watch.
You must put the set into Standby mode by
pressing the
ibutton.
When the On timer has been set, the GREEN On
timer indicator on the front of the TV will be lit
(see page 6).
1
2
3
Off timer 01:30
On timer 00:00 P02
0-9 : To set
EXIT : To exit
TIMER
If the On timer has been set, you do not have
to wait for the time period to elapse before
being able to watch the television. You can
bring the set back to life by pressing the
i
button. However, the GREEN timer light will
stay on until the set time period has passed.
