143831
37
Zoom out
Zoom in
Previous page
1/63
Next page
38
CONTROLS AND FEATURES
English
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list, when an HDMI
cable is removed it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed
Enable REGZA-LINK
in the REGZA-LINK setup menu may
need to be reset to
On
.
• If you change HDMI leads to connected devices or HDMI
device settings, reset the
Enable REGZA-LINK
item in the
REGZA-LINK setup menu from
Off
to
On
.
With REGZA-LINK mode on your television’s remote control,
you can control the connected REGZA-LINK playback device
you are watching.
To control the REGZA-LINK input source first select the
equipment with REGZA-LINK input source selection, then
switch the mode on the remote control to
REGZA-LINK
and
press any button.
See page 6 for details on available remote control key
functions.
NOTE:
The available functions depend on the equipment
connected. Not all the remote control keys may be available.
Please refer to the operation manual for each piece of
equipment connected.
When connected equipment is switched on, REGZA-LINK will
automatically switch the television input to the appropriate
HDMI input. Also, if the television is in standby, it will be
switched on automatically.
These functions can be enabled or disabled from the REGZA-
LINK setup (see page 37).
NOTE:
Even if the equipment is only showing a menu, the television
may automatically switch to that input source.
• This feature depends on the connected equipment and
television state.
If the television is turned off (standby mode), the television will
send a message to turn off (standby mode) all of the REGZA-
LINK devices connected to the television.
This function can be enabled or disabled from the REGZA-LINK
setup (see page 37).
NOTE:
This feature depends on the connected equipment and
television state.
With your television’s remote control, you can adjust or mute
the sound volume of the speakers connected to the television
via an AV amplifier.
a
Set the
Speaker Preference
to
Amplifier
in the
REGZA-LINK
menu.
b
Set the remote control mode switch to REGZA-LINK.
c
Confirm that a connected REGZA-LINK device (such as
DVD player, etc) is selected for the AV amplifier input
source.
NOTE:
• These functions depend on the device connected.
When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier’s speakers even if
TV Speakers
has been
selected. Turn the television off and on again to output the
sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.
REGZA-LINK playback device control
REGZA-LINK one touch play
Device
mode switch
REGZA-LINK system standby
REGZA-LINK system audio control
00GB_XV565D_Euro.book Page 38 Tuesday, July 22, 2008 10:58 AM
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 32xv566dg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 32xv566dg in the language / languages: English as an attachment in your email.

The manual is 4,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info