646878
80
Zoom out
Zoom in
Previous page
1/84
Next page
VL74* Digital
Series
XL74* Digital
Series
EUROPEAN UNION ECOLABEL
A
warded to goods or services which meet the environmental
requirements of the EU ecolabelling scheme
2
English
Contents
INSTALLING YOUR TV
Safety Precautions ...........................................4
Installation and important information ..............5
The remote control ..........................................7
Inserting batteries and effective range ........ 7
CONNECTING YOUR TV
Connecting external equipment ........................ 8
Bundling the cables ......................................... 9
Connecting an HDMI
®
or DVI device to the HDMI
input .......................................................... 10
To connect an HDMI device ...................... 10
To connect a DVI device ........................... 10
HDMI’s ARC (Audio Return Channel)
feature ................................................. 10
REGZA-LINK connection ................................. 11
Connecting a computer .................................. 12
To connect a PC to the RGB/PC terminal ... 12
To connect a PC to the HDMI terminal ...... 12
Connecting a home network ........................... 13
To connect the TV to a home network -
Wired ................................................... 13
To connect the TV to a home network with an
internet connection - Wireless ................ 13
Controls and input connections ...................... 14
Switching on ........................................... 14
Using the remote control .......................... 14
Using the controls and connections ........... 14
SETTING UP YOUR TV
Startup Application ........................................ 15
Quick Setup ............................................ 15
Ant/Cable/Satellite (if available) ............... 17
Satellite Settings ...................................... 17
Auto Tuning ............................................ 19
ATV Manual Tuning ....................................... 20
Tuning .................................................... 20
Skip ........................................................ 21
Sorting positions ...................................... 22
DTV Manual Tuning ....................................... 22
Manual Tuning ........................................ 22
Manual Tuning for DVB-C ........................ 23
Manual Tuning for DVB-S ......................... 23
DTV Settings .................................................. 23
Channels (Antenna/Cable) ....................... 23
Channels (Satellite) ................................. 24
Standby Channel Update ......................... 25
DVB Character Set ................................... 25
Dynamic Scan ......................................... 25
Location setting ....................................... 25
Analogue switch-off ............................... 25
CONTROLS AND FEATURES
General controls ............................................ 26
Quick Menu ............................................ 26
Selecting positions ................................... 26
The Time Display – analogue only ........... 26
Stereo and Bilingual transmissions ............ 26
Sound controls .............................................. 27
Volume controls and sound mute .............. 27
Dual ....................................................... 27
Balance .................................................. 27
Sound Navi ............................................. 27
Surround Settings .................................... 27
Dolby Volume
®
....................................... 28
Dynamic Range Control ........................... 28
Audio Level Offset ................................... 28
Audio Description .................................... 28
Widescreen viewing ....................................... 29
Picture controls .............................................. 31
Picture Mode ........................................... 31
Picture preferences .................................. 31
Reset ...................................................... 31
Colour Master ......................................... 31
Base Colour Adjustment ........................... 32
Colour Temperature ................................ 32
Auto Brightness Sensor Settings ................ 32
Active Backlight Control ........................... 33
Black/White Level .................................... 33
Static Gamma ......................................... 33
MPEG NR – Noise Reduction ..................... 33
DNR – Digital Noise Reduction ................. 33
Resolution+ ............................................ 33
Active Vision M100 .................................. 33
Film Stabilization ..................................... 34
Resetting the advanced picture settings ..... 34
Expert Picture Settings .............................. 34
Control Visualization ............................... 35
Automatic Format (Widescreen) ................ 35
4:3 Stretch .............................................. 35
Blue Screen ............................................. 35
Picture Position ........................................ 36
Picture still .............................................. 36
HDMI Information Display ........................ 36
Using your home network .............................. 37
Setting up the Network .................................. 38
Wireless Setup ........................................ 38
Advanced Network Setup ......................... 40
DNS Setup .............................................. 41
Network Connection Test ......................... 42
Using the software keyboard .......................... 42
3
English
Setting up the Media Renderer feature ............ 43
Installation .............................................. 43
Media Renderer ....................................... 43
Device Name Setup ................................. 43
Web Password Setup ................................ 44
Media Controller Setup ............................ 44
Maximum Volume Setup .......................... 44
Using YouTube™ ........................................... 45
Using the Function Menu ......................... 45
Using the Media Player .................................. 47
Basic operation ....................................... 48
Viewing photo files .................................. 49
Viewing movie files (on a DLNA CERTIFIED™
Server or USB device) ............................ 51
Playing music files (on a DLNA CERTIFIED™
Server or USB device) ............................ 53
Using the Photo Frame feature ....................... 54
To open Photo Frame ............................... 54
Setting the features ................................. 55
Other features ............................................... 56
Panel Lock .............................................. 56
The timers ..................................................... 57
Programme Timers – digital only ............. 57
On Timer ................................................ 57
Sleep Timer ............................................. 58
Energy Saving Settings ................................... 58
Automatic Power Down ............................ 58
No Signal Power Down ............................ 58
Digital on-screen information and Programme
Guide ......................................................... 59
Information ............................................. 59
Guide ..................................................... 60
Genre selection/searching ....................... 60
Digital settings – parental control ................... 61
Setting the PIN ........................................ 61
Parental Setup ......................................... 61
Network Lock .......................................... 61
Digital settings – Channel Options .................. 62
Selecting favourite channels ..................... 62
Favourite Channel Lists ............................ 62
Skip channels .......................................... 62
Locking channels ..................................... 62
Digital settings – other settings ....................... 63
Subtitles .................................................. 63
Audio languages ..................................... 63
Common Interface ................................... 63
Software Upgrade and Licences ...................... 64
Auto Upgrade ......................................... 64
Searching for New Software ..................... 64
Network Upgrade .................................... 64
Software Licences .................................... 64
System Information and Reset TV .................... 65
System Information .................................. 65
Reset TV .................................................. 65
PC Settings ................................................... 65
Horizontal and Vertical Position ................ 65
Clock Phase ............................................ 65
Sampling Clock ....................................... 66
Reset ...................................................... 66
Input selection and AV connections ................. 66
Input selection ........................................ 66
External input skip ................................... 67
Labeling video input sources .................... 67
Colour Decoding ..................................... 67
PC Audio ................................................ 68
HDMI 2 Audio ......................................... 68
Side Shared Audio ................................... 68
HDMI Settings ......................................... 68
Digital Audio Output ............................... 69
Using REGZA-LINK ........................................ 70
Enable REGZA-LINK ................................. 70
TV Auto Power ......................................... 70
Auto Standby .......................................... 70
Amplifier Control ..................................... 70
Speaker Preference .................................. 70
REGZA-LINK input source selection ........... 70
REGZA-LINK playback device control ........ 71
REGZA-LINK one touch play ..................... 71
REGZA-LINK system standby ..................... 71
REGZA-LINK system audio control ............. 71
Toshiba PC compatible with REGZA-LINK ....... 71
TEXT SERVICES
Text services .................................................. 72
Selecting modes ...................................... 72
Text information ...................................... 72
Navigating pages using Auto ................... 72
Navigating pages using LIST .................... 72
Control buttons ....................................... 73
PROBLEM SOLVING
Questions and Answers .............................. 74
INFORMATION
License Information ....................................... 77
Information ................................................... 79
Specifications and accessories ........................ 82
4
English
Safety Precautions
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products, and some points may not apply to
the goods you have just purchased.
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
The mains supply required for this equipment is 220-
240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO
read the operating instructions before you attempt
to use the equipment.
DO
ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on
equipment.
DO NOT
obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT
allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT
place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT
use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturer’s approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT
leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT
continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER connect the supplied COMPONENT
Adaptor cable or AV Adaptor cable to a wall
outlet. These cables are ONLY for insertion into
the socket provided for the purpose on the rear/
side of the TV.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
Air Circulation
Heat Damage
Mains Supply
Do
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
WARNING:
To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
INSTALLING YOUR TV
5
INSTALLING YOUR TV
English
Installation and important information
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
Injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for
cabinet cleaning. We recommend that you
do not
use any proprietary polishes or solvents on the screen or cabinet
as this may cause damage.
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
• To install a wall-mount from another manufacturer, use the
SPACERS
(supplied).
1
Unplug and remove any cables and/or other component
connectors from the rear of the TV.
2
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3
Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as described
in the instructions provided with the wall bracket.
4
Make sure to place the spacers supplied between the
bracket and the back of the TV.
5
Always use the screws supplied or recommended by the
wall mount manufacturer.
Removing the Pedestal Stand:
1
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.
NOTE:
Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2
Remove the five screws.
3
Once you have removed all five screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
Where to install
Stand clip
‘P’ Clip
Sturdy tie (as short as possible)
Fixing strap
Stand style is dependent on model
Fixing strap
When using a Wall Bracket
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
Screw
Spacer
(supplied)
TV back panel
Wall bracket
Five screws
6
INSTALLING YOUR TV
English
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (eg: Super Live) will prevent permanent retention.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE:
A Toshiba wall bracket or stand, where available, must be used.
7
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference for your remote control.
1
For On/Standby mode
2
To select external input sources
3
Selectable Picture preferences
4
Widescreen viewing
5
s
Stereo/bilingual transmissions
6
To select TV Mode
7
To access the analogue or digital Channel List
8
To access More Information Menu
9
Number buttons
10
Switch the Audio Description On/Off
11
To return to previous programme position
12
To alter the TV volume
13
To display on-screen information
To access the index page in Text mode
14
To mute the TV sound
15
To access Quick Menu
16
To change programme positions
To change TEXT pages
17
To display the digital on-screen Programme Guide
18
To exit menus
19
To page up, down, left or right
20
When using menus, the arrows move the cursor on the screen
up, down, left or right. Press
OK
to confirm your selection
21
On-screen Menus
22
To return to previous Menu
23
Colour buttons:
Text and interactive service control buttons
24
To call up text services
25
To access Media Player Menu
26
Digital Subtitles or Analogue TEXT Subtitle pages if available
28
When using REGZA-LINK:
1
To turn On/Standby
AUDIO
To access
AUDIO
Menu
SET UP
To access
SET UP
Menu
V
To EJECT
ROOT
To access
ROOT
Menu
CONTENTS
To access
CONTENTS
Menu
TOP
To access
TOP
Menu
DVD
To access
DVD
Menu
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the proper way.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 78 of this
manual.
Warning:
batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced, the batteries may need replacing.
5
13
4
1
14
16
18
23
20
28
2
7
11
9
2
3
8
6
10
12
22
21
26
24
19
17
25
15
7
27
When in TV mode:
r
Picture still
D
Analogue time
display
When in Text mode:
A
To reveal concealed
text
B
To hold a wanted
page
C
To enlarge text
display size
D
To select a page
whilst viewing a
normal picture
When using Programme
Guide:
Z
- 24 hours
z
+ 24 hours
CC
- 1 page
cc
+ 1 page
During Playback:
c
To PLAY
v
To STOP
W
/
w
To PAUSE/STEP
Z
To SKIP-BACK
CC
To REWIND
cc
To FAST FORWARD
z
To SKIP-FORWARD
Inserting batteries and effective range
8
English
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:
. . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
Satellite cable:
. . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the
SATELLITE
ANTENNA
socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads:
. . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder
IN
/
OUT
socket to the television.
Connect the decoder
TV
socket to the television.
Use the SCART Adaptor cable (supplied).
Before running
Auto Tuning
, put your decoder and media
recorder to
Standby
.
*COMPONENT VIDEO INPUT
connection:
Use the COMPONENT Adaptor cable (supplied).
The AUDIO terminals are shared with the
VIDEO INPUT
.
**VIDEO INPUT
connection:
Use the A/V Adaptor cable (supplied).
The AUDIO terminals are shared with the
COMPONENT
INPUT
.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI
®
(High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 80.
NOTE:
Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN
port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner
’s
manuals for
all
additional equipment must be
referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
DTV
,
EXT 1
,
EXT 2
,
EXT 3
,
HDMI 1
,
HDMI 2
,
HDMI 3
,
HDMI 4
,
PC
or
ATV
.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
VIDEO INPUT**
COMPONENT VIDEO INPUT*
HDMI
®
INPUT SOCKETS
media recorder
POWER switch
Satellite dish
LAN port
OPTICAL DIGITAL AUDIO OUTPUT
Aerial/Cable
SCART Adaptor cable
(supplied)
PC/HDMI2 AUDIO (shared)
FIXING STRAP
POWER cord
“F-type”
9
CONNECTING YOUR TV
English
Bundling the cables
Install the cable clamps, and put the cables in these.
Stand type
Wall Mount type
Cable Clamps
Cable Clamps
10
CONNECTING YOUR TV
English
Connecting an HDMI
®
or DVI
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 80.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™
and
Enable Content Type
options to
Off
”.
Your early HDMI source should operate properly with your
television. See page 68.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 2 Audio” on page 68.
To view the HDMI device video, press the
o
button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 2 terminal and audio cables to the PC/
HDMI 2 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 2 Audio” on page 68.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
This feature enables the audio signal of the TV to be sent to the
AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received from
the tuner of the TV through the AV amplifier.
To connect an HDMI device
HDMI cable
HDMI device
the back of your television
To connect a DVI device
HDMI’s ARC (Audio Return Channel) feature
HDMI-to- DVI
adaptor Cable
Audio cable for HDMI to
television connection
(not supplied)
DVI device
HDMI cable
AV amplifier that supports ARC
11
CONNECTING YOUR TV
English
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 70–71.
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
After completing the above connections, set the REGZA-LINK
Setup menu as you desire (see page 70).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
AV amplifier
Playback device
Playback device
the back of your television
12
CONNECTING YOUR TV
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the television’s speakers.
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select
PC
from the
PC/HDMI 2 Audio
options in the
AV Connection
menu located in the
PREFERENCES
menu.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 79.
To display the optimum picture, use the PC setting feature (see
page 65).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 2 analogue audio input terminal (see page 68).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multi-
angle scenes.
A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g.
Colour System
in the
SETUP
menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 79) .
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
For acceptable PC and video signal formats, see page 80.
NOTE:
• The edges of the images may be hidden.
If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
To connect a PC to the RGB/PC terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion adaptor if
required
(not supplied)
Mini D-sub 15 pin
connector
RGB PC cable
(not supplied)
To connect a PC to the HDMI terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
HDMI-to-DVI
adaptor cable
13
CONNECTING YOUR TV
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 41.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
Please refer to “Wireless Setup” section on page 38.
To connect the TV to a home network -
Wired
the back of your television
Cable or
Phone jack
[2]
[2][3]
[2][1]
Modem (if available)
Router with hub
Server PC
To connect the TV to a home network with
an internet connection - Wireless
Access point (AP)
Wireless LAN router
Modem
PC
TOSHIBA Dual
Band WLAN adaptor
the back of your television
14
CONNECTING YOUR TV
English
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is connected
to the power supply and push the
!
(POWER) button on the
left side of the television to switch the television on. If the
picture does not appear, press
1
on the remote control; it may
take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
1
on the remote
control. To view the television, press
1
again. The picture may
take a few seconds to appear.
Press
MENU
on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
C
or
c
on the remote control, its
respective options will appear below.
NOTE:
The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are not
available in a mode, they will appear greyed out.
To use the option, press
B
and
b
on the remote control to
move up and down and press
C
or
c
to select your desired
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
To alter the volume gently touch –
2
+.
To alter the programme position touch
b
p
B
.
Touch
MENU
and –
2
+ or
b
p
B
to control the sound and
picture options.
Touch
MENU
to finish.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected via
USB 1 (USB 2 provides access to photos only).
NOTE:
The USB socket has limited functionality and Toshiba can
take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-10U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
To select an external input, press
o
until the appropriate input
source is selected.
Please always refer to the owner’s manual of the equipment to
be connected for full details.
RED LED – Standby
BLUE LED – Power on
ORANGE LED - Programme timer set
(
digital
only)
RED LED – Programme timer Active
(
digital
only)
POWER switch
(Full Power Down Option)
COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be canceled.
GREEN LED – On Timer set
Control panel (touch sensor)
Ambient Light Sensor
USB 2 Wireless LAN adaptor
ready for a home network
USB 1 Media Player
Switching on
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This is
recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE:
Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Using the remote control
Using the controls and connections
15
English
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
Standby
.
To set up the television, use the buttons on the
remote control as detailed on page 7.
a
Press the
1
button. The
Menu Language
screen will
appear. This screen will appear the first time that the
television is switched on and each time
Reset TV
is
selected.
b
Press
B
,
b
,
C
, or
c
to select the menu language, and
then press
OK
.
c
Highlight
Country
and
C
or
c
to select. The television
is now set to tune the stations for your country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
If there is not a country that you want to select in the
list, select
Others
.
d
Press
OK
, and the
Location
screen will appear.
e
Press
C
or
c
to select
Home
or
Store
. For normal
home use, select
Home
.
f
Press
OK
. If
Store
is selected in step 5, a
Store mode
confirmation window will appear. If you select
Yes
from that window, the TV will proceed to the
Auto
Demo
setup screen.
g
Press
OK
, and the
TV Mounting
screen will appear,
press
C
or
c
to select
Stand
or
Wall
.
h
Press
OK
, and the
AutoView
screen will appear, press
C
or
c
to select
Yes
or
No
.
i
Press
OK
. If the
Ant/Cable/Satellite
screen appears,
press
B
or
b
to select
Antenna
,
Cable
or
Satellite
,
and then press
OK
to check ( ).
If DVB-C is not supported in your area,
Cable
will not
be displayed.
When you select
Antenna
or
Cable
, follow steps 10
to 13.
• When you select
Satellite
, skip to step 14.
When you select
Antenna
(or
Cable
) and
Satellite
,
the Satellite Settings startup screen will appear
automatically after completing the
Antenna
(or
Cable
) scan and pressing
OK
.
j
Select
Next
and press
OK
. The
Auto Tuning
startup
screen will appear with the option to select between
DTV and ATV
,
DTV
or
ATV
if available. Use
C
or
c
to select the appropriate mode.
k
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DTV
and/or
ATV
channels. The progress bar will indicate
the scan status.
Quick Setup
Quick Setup
Country
Germany
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant / Cable / Satellite
Satellite
Cable
Next
Antenna
16
SETTING UP YOUR TV
English
You must allow the television to complete the search.
When the search is complete, the television will
automatically select position one.
The
Auto Tuning
screen will display the total number
of services found.
l
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
m
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
(DTV Ant TV/RADIO/TEXT, DTV Cable
TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available)
modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
Select
Next
and press
OK
. The
Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” section on page 17.
Highlight
Done
and press
OK
.
If your satellite dish is movable, the following
Positioning
screen will appear.
Press
B
or
b
to highlight
Positioning
, and then press
C
or
c
to find the dish position with the strongest
signal level.
Press
B
or
b
to highlight
Store Position
and press
OK
to store the dish position. Repeat steps 14 and 15
for the next satellite as needed.
If your satellite dish is not movable, the
Positioning
screen will not appear.
Adjust the dish position manually for maximum Signal
Level strength.
Highlight
Done
and press
OK
.
If the reception testing completes successfully, the
Auto Tuning
startup screen will display.
You can select
Scan Option
from
Free to Air
and
All
.
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the
Auto Tuning
results
screen will display the total number of services found.
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
PLEASE NOTE
The
Quick Setup
menu can also be accessed at any
time from the
SETUP
menu.
Positioning
Signal Level
Go to Stored Position
Store Position
Transponder
1/83 (10743 MHz H)
Positioning
WE
Go to 0
Satellite : ASTRA 19.2°E
Step Size
1
Auto Tuning - Satellite
Start Scan
Satellite
Free to Air
ASTRA(19.2°E)
Scan Option
17
SETTING UP YOUR TV
English
From this menu, you can set the RF input configuration.
a
Press
MENU
, and select
SETUP
menu.
b
Use
b
to highlight
Ant/Cable/Satellite
and use
C
or
c
to select
Antenna
,
Cable
or
Satellite
.
NOTE:
When you attempt to change the
Ant/Cable/
Satellite
setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for
Auto Tuning
.
c
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto
Tuning
screen.
Press
B
or
b
to select an item, and then press
C
or
c
to select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
From the SETUP menu, you can add the satellites that you wish
to tune and configure detailed settings for each one
individually.
To add a satellite:
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
b
Use
b
to highlight
Satellite Settings
. Press
OK
.
c
Press
b
to highlight a new line to add an another
satellite, and press
OK
.
d
Press
b
until the required satellite is displayed and press
OK
.
Ant/Cable/Satellite (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
Satellite Settings
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
18
SETTING UP YOUR TV
English
To delete a satellite:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the satellite you want to delete.
b
Press the
RED
button. A confirmation window will
appear.
c
Press
C
or
c
to select
Yes
and press
OK
.
NOTE:
It is not possible to delete position No.1.
To edit the satellite settings:
a
In the
Satellite Settings
menu, press
B
to highlight
Switch Type
.
b
Press
C
or
c
to select
None
,
ToneBurst
,
DiSEqC
2way
or
DiSEqC 4way
as your satellite switch type.
c
Press
b
to highlight
LNB Power
and press
C
or
c
to
select
On
or
Off
.
To add a transponder:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the line you want to edit and press
OK
.
b
Press the
GREEN
button. The
Transponder Settings
screen will appear.
c
Press
B
to highlight a new line.
d
Press
OK
.
e
Edit each parameter as required and press
OK
. See
page 18
.
To delete a transponder:
a
In the
Transponder Settings
menu, press
B
or
b
to
highlight the line you want to delete.
b
Press the
RED
button.
To edit the Transponder Settings:
a
In the
Transponder Settings
menu, press
B
or
b
to
highlight the line you want to edit and press
OK
.
b
Press
C
or
c
to select
Frequency
,
Polarisation
,
Symbol Rate
or
S/S2
, and set the item using the
number buttons if necessary.
c
Press
OK
to save your settings.
d
Repeat steps 1 through 3 for other lines.
e
Press
BLUE
to finish editing and return to Satellite
Settings.
Press
GREEN
to cancel any edits that were made this
time.
Press
YELLOW
to reset all transponder settings to their
initial default settings.
ASTRA 19.2˚E
111
Transponder Settings
1 10743 H
Frequency Polarisation Symbol Rate S/S2
7 10861
8 10876
2 10773
3 10788
4 10817
5 10832
6 10847
H
V
H
V
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder Settings
76 12640 V
Frequency Polarisation Symbol Rate S/S2
82 12728
83
77 12662
78 12669
79 12692
80 12699
81 12721
V
H
V
H
V
H
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
83 0 H0S
83 12731 H 22000 S2
19
SETTING UP YOUR TV
English
To select the Dish Type:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the required satellite line, and then press
OK
.
b
Press
C
or
c
to highlight
Dish
, and then press the
GREEN
button.
c
Press
C
or
c
to select
Dish Type
. You can select
Movable
or
Fixed
as the Dish Type.
To select the LNB Settings:
a
In the
Satellite Settings
menu, press
B
or
b
to
highlight the required satellite line, and then press
OK
.
b
Press
C
or
c
to highlight
LNB
, and then press the
GREEN
button.
c
Press
B
or
b
to select
Lower LOF
or
Upper LOF
and
input the appropriate frequencies.
NOTE:
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning
will completely re-tune the television and can be
used to update the channel list.
It is recommended that Auto
Tuning is run periodically to ensure that all new services
are added
. All current channels and settings, i.e. locked
channels, will be lost.
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
Use
b
to highlight
Auto Tuning
. Press
OK
.
b
For DTV/ATV Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Use
C
or
c
to select
DTV and ATV
,
DTV
or
ATV
, if
available, then highlight
Start Scan
and press
OK
to
continue with the
Auto Tuning
.
NOTE:
If you have selected “
Others
” for the
Country
field in the
SETUP
menu, and selected a tuning mode
other than
DTV
” , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the
Auto Tuning
screen
will display the services found.
Auto Tuning
Dish Settings
Dish Type
Fixed
Dish : 1
LNB Settings
Lower LOF
9750
LNB : 1
Upper LOF
10600
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Satellite Settings
Germany
Auto Tuning
DTV and ATVTuning Mode
Start Scan
Previous settings will be lost!
Press EXIT for no change.
20
SETTING UP YOUR TV
English
For Satellite Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Press
B
or
b
to highlight
Satellite
and then press
C
or
c
to select the desired satellite (
No.1 Sat
~
No.4 Sat
or
All
).
You can select
Free to Air
or
All
as the Search Option.
Highlight
Start Scan
and press
OK
to continue with
the
Auto Tuning
.
When the search is complete, the
Auto Tuning
screen
will display the services found.
c
Use
b
or
B
to move through the list to select a
channel, and then press
OK
to view.
ATV Manual Tuning
The television can be tuned-in manually using
ATV Manual
Tuning
. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another
System
.
Use
C
and
c
t
o move across the screen and select any of the
ATV Manual Tuning options
.
Then use
B
or
b
to adjust the
settings
.
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
Set Skip to On (
8
) or Off (
(
) for the selected channel.
See page 21
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 74.
9
Station
Station identification. Use the
B
or
b
and
C
or
c
buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
AllSatellite
Free to AirSearch Option
Start Scan
Tuning
ATV Manual Tuning
System
1 A C 2 0 V C R
I
123 4 65 7 8 9
21
SETTING UP YOUR TV
English
a
Press
MENU
and use
C
or
c
to select the
SETUP
menu. Press
b
to highlight
ATV Manual Tuning
and
press
OK
to select.
b
Use
B
or
b
to highlight the desired position. We
suggest
Pos. 0
for a media recorder.
c
Press
OK
to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d
Press
c
to select
System
and use
B
or
b
to change if
required.
e
Then press
c
to select
Search
.
f
Press
B
or
b
to begin the search. The search symbol
will flash.
g
Each signal will show on the television. If it is not your
media recorder, press
B
or
b
again to restart the
search.
h
When your media recorder signal is found, press
c
to
move along to
Station
. Use
B
,
b
,
C
and
c
to put in
the required characters,
e.g.
VCR
.
i
Press
OK
to save.
j
Repeat for each
position
you want to tune, or press
RETURN
to return to the list of channels and select the
next number to tune.
k
Press
EXIT
when you have finished.
To prevent certain channels from being viewed, positions can be
skipped.
a
Select
ATV Manual Tuning
from the
SETUP
menu.
b
Use
B
or
b
to highlight the position to be skipped and
press
OK
to select.
Different
Channel
numbers may be displayed.
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Satellite Settings
Germany
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0
I
ATV Manual Tuning
Search
1 C 2 0 IA
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the
ATV Manual Tuning
screen in
Step 3
.
Enter the
Position number
, the
System
, then
C
for
standard (terrestrial) channels or
S
for cable
channels and the
Channel
number. Press
OK
to
save.
Skip
ATV Manual Tuning
Station
1 A C 2 0 V C R I
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
22
SETTING UP YOUR TV
English
c
Press
c
to select
Skip
.
d
Use
B
or
b
to turn
Skip
on.
Press
OK
.
8
on the screen indicates a skipped position.
e
Press
RETURN
and repeat from
Step 2
or press
EXIT
.
Each position has to be
individually
selected. To turn
Skip
off, repeat the procedure for each position.
Skipped positions
cannot
be selected by
P
U
and
P
u
or by the controls on the television but
can
still be
accessed by the number buttons on the remote
control.
Channels may be moved and saved to the position of your
choice.
a
Select
ATV Manual Tuning
from the
SETUP
menu.
b
With the list of channels showing, use
B
or
b
to
highlight the channel you want to move and press
c
.
c
Use
B
or
b
to move through the list to your preferred
position. As you do so, the other channels will move to
make room.
d
Press
C
to save your move.
Repeat as necessary, and then press
EXIT
.
DTV Manual Tuning
NOTE:
The content of this menu varies depending on the DTV
input (
Antenna
,
Cable
, or
Satellite
) that is currently selected.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
a
Select
DTV Manual Tuning
from the
SETUP
menu
and press
OK
.
b
Enter the multiplex number using the number buttons
or use
C
or
c
to adjust the number up or down.
c
Highlight
Start Scan
, and then press
OK
. The
television will automatically search for that multiplex.
When the multiplex is found, any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press
EXIT
to finish.
Sorting positions
ATV Manual Tuning
Skip: On
1 A C 2 0 I
Pos. Channel Station
ATV Manual Tuning
2
3
4
5
6
7
8
S10
C7
C40
C22
1
C2
C25
C28
C30
ABC1
ABC1
Manual Tuning
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
13
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi
51
23
SETTING UP YOUR TV
English
When
Ant/Cable/Satellite
is set to
Cable, DTV Manual
Tuning
items are as follows:
Frequency
– input a specific frequency to be scanned
Modulation
– choose from one of five QAM modulation
options
Symbol Rate
– input a specific baud rate (KS/s) to be used for
the manual scan
Highlight
Start Scan
, and then press
OK
.
When
Ant/Cable/Satellite
is set to
Satellite, DTV Manual
Tuning
items are as follows:
Use
B
or
b
to highlight an item (
Satellite
,
Transponder
,
Frequency
,
Symbol Rate
,
Polarisation
or
Search Option
),
and then press
C
or
c
to select the required option.
Highlight
Start Scan
, and then press
OK
.
DTV Settings
The channel order may be changed to suit your personal
preference.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Select
Channels
and press
OK
.
c
For your convenience, you can jump to specific places
in the list by one of two methods.
Line Number Jump
—Use the
number buttons
(0-9) to input the line number you want to select, and
then press
OK
.
Station Letter Jump
—Press
CC
or
cc
to jump
to the next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber
Press the
RED
button to renumber the
highlighted channel. Edit the channel number using
the
number buttons
and press
OK
.
Manual Tuning for DVB-C
Manual Tuning for DVB-S
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder
1/83
Frequency
10714 MHz
Symbol Rate
22000 KS/s
Polarisation
H
Search Option
Free to Air
Channels (Antenna/Cable)
DTV Settings
Channels
PIN Setting
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
Channels
Line No. 1/10
TV
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
----
Name
24
SETTING UP YOUR TV
English
Move
—Press the
GREEN
button to activate the
Move
feature. Use the
B
or
b
buttons to select the
channel you wish to move and press
OK
to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B
or
b
buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the
GREEN
button to execute the move.
Sort
—Press the
YELLOW
button. A confirmation
window will appear. Press
C
or
c
to select
Yes
and
press
OK
.
The
Sorting Type
selection window will appear.
Press
C
or
c
to set the sorting type.
A - Z
Station name order (A to Z)
Channel Number
Position No. order (numerical
sequence)
Press
b
to highlight
Sort
and press
OK
.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Select
Channels
and press
OK
.
The satellite channel list will appear.
c
For your convenience, you can edit and sort your
channel list.
Line Number Jump
—Use the
number buttons
(0-9) to input the line number you want to select, and
then press
OK
.
Station Letter Jump
—Press
CC
or
cc
to jump
to the next station name with a different initial letter.
Satellite Jump
—Press
Z
or
z
to jump to the
next channel on a different Satellite.
Renumber
— Same as Antenna/Cable channels.
See page 23.
Move
— Same as Antenna/Cable channels. See
page 24.
Sort
— Press the
YELLOW
button. A confirmation
window will appear. Press
C
or
c
to select
Yes
and
press
OK
.
The
Sort
menu will appear.
Channels
Line No. 1/10
TV
1 ABC ONE
Pos. Name
822 AA
823 AC
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
Sorting Type A - Z
Sort
Sort
Channels (Satellite)
Channels
Line No. 4/1200
Satellite TV
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2AB
3E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Group By Satellite
Sorting Type Channel Number
Preset Order Yes
Sort
Sort
25
SETTING UP YOUR TV
English
Group
— Press
C
or
c
to select
All
or
By Satellite
.
Sorting Type
— Press
C
or
c
to set the sorting type.
A - Z
Station name order (A to Z)
Channel Number
Position No. order (numerical
sequence)
Preset Order
—Press
C
or
c
to set
Yes
or
No
.
This item is displayed when Country is set to Germany,
and only applies to the Astra 19.2°E satellite.
Press
b
to highlight
Sort
and press
OK
.
If the
Standby Channel Update
is set to
On
, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
Standby Channel Update
and use
C
or
c
to select
On
.
This feature allows you to manually select the character set
(
Standard
= Table 0,
West
= Table 5 or
Latin alphabet 9
)
to be used for DVB-C or DVB-T channels.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
DVB Character Set
and use
C
or
c
to select
Standard
,
West
or
Latin alphabet 9
.
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
Broadcast information has changed. Would you like to
rescan now?
”. Please follow the message. If you do not wish
for the TV to detect changes and prompt you to rescan, you
should set this feature to “
Off
”.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
Dynamic Scan
and use
C
or
c
to
select
On
.
You can select either
Home
or
Store
mode.
Home
is
recommended for normal home use. Select
Store
when using
the television for displaying in a shop, etc.
a
Select
Location
from the
SETUP
menu.
b
Press
C
or
c
to select
Home
or
Store
.
This is a
digital
television which is integrated to allow the use
of both
digital
and
analogue
services. However, during the
lifetime of this set it is very likely that
analogue
services will
be switched off to allow for more new
digital
services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new
digital
services can be viewed without
disruption.
Standby Channel Update
DVB Character Set
Dynamic Scan
Location setting
Analogue
switch-off
26
English
CONTROLS AND FEATURES
General controls
Quick Menu
helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep
Timer
etc.
Press
QUICK
to display the
Quick Menu
and use
B
or
b
to
select the option.
NOTE: Quick Menu
items are different depending on the
current mode.
Quick menu item example
To select a position, use the numbered buttons on the remote
control.
Positions can also be selected using
P
U
and
P
u
.
To display on-screen information such as position, input mode
or stereo/mono signal, press . Press again to cancel.
The time display facility allows the current (text service) time to
be seen on the television screen.
Press
D
whilst watching a normal television broadcast to
see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE:
This display may not be available in some cases.
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo…
Press
s
to select
Stereo
or
Mono
.
Bilingual…
Bilingual transmissions are rare. If they are
transmitted, the word
Dual
will be displayed. Choose the
required programme number, and if the word
Dual
appears,
press
s
to select
Dual 1
,
Dual 2
or
Mono
.
For DTV programmes
For stereo or dual mono broadcasts, press
s
and use
C
or
c
to select settings.
For multi-audio track broadcasts, press
s
repeatedly to
change the audio language (see ‘Audio language’ on
page 63).
Quick Menu
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
Picture Mode See page 31.
Picture Size See page 29.
More Information See page 59.
Channel Options See page 62.
YouTube See page 45.
Media Player See page 47.
Photo Frame See page 54.
Sleep Timer See page 58.
Speakers See page 70.
Wireless Information See page 40.
When using EPG Genre Colour See page 60.
EPG Update/
Cancel EPG Update
See page 60.
Media Player (Multi
View, List View)
Sort See page 50.
Interval Time See page 50.
Repeat See page 50.
Device Information See page 50.
Wireless Information See page 40.
Photo Frame PICTURE See page 31.
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Selecting positions
The Time Display –
analogue
only
Stereo and Bilingual transmissions
Mode Display Pressing
c
Stereo Stereo
S
Left
S
Right
Dual mono Dual 1
S
Dual 2
Mono
Multichannel
27
CONTROLS AND FEATURES
English
Sound controls
Volume
Press
y
or
Y
to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
If a programme or film is being broadcast with a soundtrack in
more than one language, the
DUAL
feature allows selection
between them.
a
Press
MENU
and
C
or
c
to select the
SOUND
menu.
b
Press
b
to highlight
Dual
, and then press
C
or
c
to
choose between
Dual 1
or
Dual 2
.
The sound controls are accessible in
digital
and
analogue
modes.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Balance
, and then press
C
or
c
to emphasize left or right speaker balance.
You can customize current sound mode settings. Select the
appropriate mode in accordance with the installation location of
the TV (
Stand
or
Wall
) and adjust the equalizer on-screen as
desired.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Advanced Sound Settings
, and
then press
OK
.
c
Press
b
to highlight
Sound Navi
, and then press
OK
.
d
Press
C
or
c
to select either
Stand
or
Wall
depending
on how your TV is installed, and then press the RED
button.
e
Press
C
or
c
to select the frequency range you want to
adjust from the equalizer window, and then press
B
or
b
to adjust the level.
f
Repeat step 5 for other frequencies.
Surround
,
Voice Enhancement
, and
Dynamic Bass Boost
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio will
sound fuller, richer, and wider.
a
In the
SOUND
menu, press
b
to highlight
Advanced
Sound Settings
, and then press
OK
.
b
Press
b
to highlight
Surround
, and then press
C
or
c
to select
Off
,
Spatial
or
Cinema
.
Volume controls and sound mute
Dual
Balance
Sound Navi
Dual
Balance
Advanced Sound Settings
Audio Level Offset
Audio Description
0
Dual 1
Dolby Volume Low
Dynamic Range Control Off
SOUND
Surround Settings
Surround Off
Voice Enhancement On
Sound Navi
Dynamic Bass Boost High
Advanced Sound Settings
TV Mounting Stand
Sound Navi
+20
0
-20
100 330 1K 3.3K 10K [Hz]
2 1 0 1 2 [Level]
Equalizer
Surround Off
Voice Enhancement
Sound Navi
On
Dynamic Bass Boost High
Advanced Sound Settings
28
CONTROLS AND FEATURES
English
c
Press
b
to highlight
Voice Enhancement
, and then
press
C
or
c
to select
On
.
d
Press
b
to highlight
Dynamic Bass Boost
and using
C
or
c
select the desired bass expansion level (
Off,
Low
or
High
).
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
a
In the
SOUND
menu, press
b
to highlight
Dolby
Volume
.
b
Press
C
or
c
to select
Low
,
High
or
Off
.
NOTE:
•The
Dolby Volume
setting influences the
Dynamic Range
Control
and
Digital Audio Output
settings.
•If
Dynamic Range Control
is set to
On
, this feature will be
disabled.
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a
In the
SOUND
menu, press
b
to highlight
Dynamic
Range Control
.
b
Press
C
or
c
to select
On
or
Off
.
NOTE:
This feature is disabled when
Dolby Volume
is set to
Low
or
High
.
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or
an external input. Using the
Audio Level Offset
feature
reduces these volume differences.
a
Set the volume level usually used when watching a
DTV 5.1ch programme.
b
Tune to a channel which is DTV 2ch, ATV or an external
input.
c
In the
SOUND
menu, press
b
to highlight
Audio
Level Offset
and press
OK
.
d
Press
b
to highlight an option, and then use
C
or
c
to adjust the volume level.
NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only
DTV 2ch
is available and the other two items are
greyed out in the menu. This allows you to easily adjust
according to each condition.
When watching a DTV 5.1ch programme, this feature is not
available.
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.
a
In the
SOUND
menu, select
Audio Description
and
press
OK
.
b
Highlight
Audio Description
, and then press
C
or
c
to select
On
.
The
AD
button on the Remote can also be used to
toggle the
Audio Description
feature between On
and Off.
c
To adjust the level of the audio description sound to
the main sound, highlight
Mixing Level
and use
C
or
c
.
Dolby Volume
®
Dynamic Range Control
Audio Level Offset
Audio Description
0
0
-5
Audio Level Offset
ATV
DTV 2ch
External Input
50
Audio Description
Mixing Level
Audio Description
On
29
CONTROLS AND FEATURES
English
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.
SUBTITLE
SUBTITLE
SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.
WIDE
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible
on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast.
14:9
Use this setting when watching a
14:9 broadcast.
30
CONTROLS AND FEATURES
English
Press the button on the Remote to display the list of available widescreen formats.
Press the button repeatedly to highlight the required format.
The
Quick Menu
feature can also be used to select
Picture Size
.
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.
Dot by Dot
PC NORMAL
This setting will show the picture
without overscan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
PC WIDE
This setting will show the picture
without overscan or side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
“Dot by Dot”
is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (e.g. VGA input source).
NATIVE
This setting will show the picture
without overscan, i.e. WYSIWYG.
Picture Size
4:3
Super Live
Wide
Native
Cinema
14:9
Subtitle
Picture Size
PC Wide
Dot by Dot
PC Normal
AV format PC format
31
CONTROLS AND FEATURES
English
Picture controls
Most of the picture controls and functions are
available in both
digital
and
analogue
modes.
PLEASE NOTE: Features not available will be greyed
out or hidden.
This television offers the choice of personalising the picture
style.
AutoView
,
Dynamic
,
Standard
,
Hollywood 1
,
Hollywood
2
,
Store
,
Game
and
PC
are preset options and affect many
features/settings within the television.
NOTE:
• Because the
AutoView
mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the
Auto Brightness Sensor
and
Expert Mode
menus are greyed out when it is selected.
Store
mode is only available when
Location
is set to
Store
.
Game
mode is available in external input mode (other than
aerial input). When you select
Game
mode, suitable
widescreen formats will be selected.
PC
mode is available in RGB/PC input mode or HDMI input
mode.
a
In the
PICTURE
menu, press
b
to select
Picture
Mode
.
b
Press
C
or
c
to select the picture mode you prefer and
press
OK
.
NOTE:
The picture mode you select affects the current input
only. You can select a different picture mode for each input.
You can customize current picture mode settings as desired. For
example, while selecting “
Dynamic
”, if you change the
following items, such as
Backlight
,
Contrast
,
Brightness
,
Colour
,
Tint
,
Sharpness
and the
Advanced Picture Settings
items, your new settings are saved for “
Dynamic
” picture
mode.
a
In the
PICTURE
menu, press
b
to select either
Backlight
,
Contrast
,
Brightness
,
Colour
,
Tint
or
Sharpness
and press
OK
.
b
Press
C
or
c
to adjust the settings.
This feature resets all picture settings to the factory settings
except
Picture Mode
.
a
In the
PICTURE
menu, press
b
to select
Reset
and
press
OK
.
b
A confirmation message will appear. Press
C
or
c
to
select
Yes
and press
OK
.
When
ColourMaster
is set to
On,
it allows the ‘Base Colour
Adjustment’ feature to become available.
a
In the
PICTURE
menu, press
b
to select
Advanced
Picture Settings
and press
OK
.
b
Press
b
to select
ColourMaster
.
c
Press
C
or
c
to select
On
or
Off
, and then press
OK
.
Picture Mode
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Dynamic
Contrast
Brightness
PICTURE
Picture preferences
Reset
Colour Master
ColourMaster
Base Colour Adjustment
Colour Temperature
Black/White Level
Static Gamma
Noise Reduction
10
10
0
Off
On
Auto Brightness Sensor Settings
Active Backlight Control
Advanced Picture Settings
32
CONTROLS AND FEATURES
English
The
Base Colour Adjustment
feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Base Colour Adjustment
, and then press
OK
.
b
Press
B
or
b
to select an option, and then press
c
to
move to the adjustment window.
c
Press
C
or
c
to select
Hue
,
Saturation
or
Brightness
, and then press
B
or
b
to adjust the
settings as required.
d
Press
RETURN
to return to the previous menu.
To return to the factory settings, select
Reset
and press
OK
.
Colour Temperature
increases the ‘warmth’ or ‘coolness’ of
the picture by increasing the red or blue tint.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Colour Temperature
and press
OK
.
b
Press
C
or
c
to adjust the level.
The adjustment range is 0 (warm) to 10 (cool).
NOTE:
If
Picture Mode
is set to
AutoView
, the adjustment
range is -5 to +5.
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Auto Brightness Sensor Settings
and press
OK
.
b
Press
C
or
c
to select
On
and press
OK
.
c
Press
b
to select
Backlight Adjustment Pro
and
press
OK
.
d
The
Backlight Adjustment Pro
window will appear.
Press
OK
again to display the adjustment window.
e
Press
C
or
c
to select a point and press
B
or
b
to
adjust the level.
f
Press
OK
to fix the adjustment.
To cancel the adjustment when selecting a point, select
Cancel
and press
OK
.
To return the adjustments of all points to the factory
defaults, select
Reset
and press
OK
.
Base Colour Adjustment
Colour Temperature
Hue
Saturation
Reset
Brightness
0Red
Green
Blue
Yellow
Magenta
Cyan
00
000
000
000
000
000
Base Colour Adjustment
Hue Saturation Brightness
0Red 0 -1
Auto Brightness Sensor Settings
Auto Brightness Sensor Settings
Backlight Adjustment Pro
Auto Brightness Sensor
On
100
0
Backlight Adjustment Pro
Backlight Control Level
Control
Level
Ambient Light
48
Cancel
Reset
33
CONTROLS AND FEATURES
English
When
Active Backlight Control
is activated, it will
automatically optimize the backlighting levels for dark scenes.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Active Backlight Control
.
b
Press
C
or
c
to select
On
or
Off
.
Black/White Level
increases the strength of dark areas of the
picture to improve the definition.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Black/White Level
.
b
Press
C
or
c
to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of black
in the picture.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Static Gamma
.
b
Press
C
or
c
to adjust the level.
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the
MPEG NR
feature reduces this effect by smoothing
out the edges.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Noise Reduction
and press
OK
.
b
Press
b
to select
MPEG NR
.
c
Press
C
or
c
to select
Low
,
Middle
,
High
or
Off
to
suit your preference.
DNR
allows you to ‘soften’ the screen representation of a weak
signal to reduce the noise effect.
a
Select
DNR
from the
Noise Reduction
menu.
b
Use
C
or
c
to select
Low
,
Middle
,
High
,
Auto
or
Off
.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The
Resolution+
feature allows you to adjust the clarity levels
for your desired picture settings.
a
In the
Advanced
Picture Settings
menu, press
b
to
select
Resolution+
and press
OK
.
b
In the
Resolution+
field, select
On
.
c
Press
b
to highlight
Level
, and then press
C
or
c
to
adjust the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Active Vision M100.
b
Press
C
or
c
to select
On
or
Off
.
NOTE:
When
Picture Mode
is set to
Game
, this feature will
be grayed out and automatically set to
Off
.
Active Backlight Control
Black/White Level
Static Gamma
MPEG NR – Noise Reduction
Noise Reduction
DNR
MPEG NR
Low
Auto
DNR – Digital Noise Reduction
Resolution+
Active Vision M100
Resolution+
Level
Resolution+
On
3
34
CONTROLS AND FEATURES
English
The
Film Stabilization
feature allows the adjustment of motion
smoothness.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Film Stabilization
.
b
Press
C
or
c
to select
Standard
,
Smooth
or
Off
.
NOTE:
• When
Picture Mode
is set to
AutoView
, the
Film
Stabilization
feature will have an additional “
Auto
” mode.
• When
Picture Mode
is set to
Game
, this feature will be
grayed out and automatically set to
Off
.
This feature allows you to reset the current
Advanced Picture
Settings
to the default values.
a
In the
Advanced Picture Settings
menu, press
b
to
select
Reset
.
b
Press
OK
.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without removing
the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the
PICTURE
menu, press
B
or
b
to select
Expert
Picture Settings
, and then press
OK
to display
Expert
Picture Settings
menu.
b
Press
B
or
b
to select
Test Pattern
.
c
Press
C
or
c
to select
On
.
d
Press
EXIT
to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more accurate
adjustment of each colour.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
RGB Filter
, and then press
OK
.
b
Press
B
or
b
to select
Red
,
Green
or
Blue
to adjust.
c
Press
C
or
c
to select
On
.
d
Press
b
to select
Colour
or
Tint
, and then press
C
or
c
to adjust.
e
Press
EXIT
.
NOTE:
It is not possible to turn off all three colours
simultaneously.
White Balance-
Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
, and then press
OK
.
b
Press
B
or
b
to select
Window Display
and press
C
or
c
to select
On
.
c
Press
EXIT
to close.
White Balance-
Setting Type
You can select the type of white balance adjustment that you
wish to perform.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
, and then press
OK
.
b
Press
B
or
b
to select
Setting Type
and press
C
or
c
to select
2P
or
10P
.
White Balance-
2P White Balance
a
Press
b
to select
2P White Balance
.
b
Press
B
or
b
to select
Red-Offset
,
Green-Offset
,
Blue-Offset
,
Red-Gain
,
Green-Gain
, or
Blue-
Gain
.
c
Press
C
or
c
to adjust.
White Balance-
10P White Balance
a
Press
b
to select
10P White Balance
.
b
Press
B
or
b
to select
IRE
,
Red
,
Green
, or
Blue
.
c
Press
C
or
c
to adjust.
NOTE:
The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
Film Stabilization
Resetting the advanced picture settings
Expert Picture Settings
35
CONTROLS AND FEATURES
English
White Balance-
Copy to All Inputs
This feature copies White Balance on the current input to all
other inputs that are set to the same picture mode. Individual
settings that are not allowed for a specific input will not be
copied.
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
White Balance
and then press
OK
.
b
Press
B
or
b
to select
Copy to All Inputs
, and then
press
OK
.
A confirmation screen appears.
c
Select
Yes
, and then press
OK
.
Resetting to the factory defaults
a
In the
Expert Picture Settings
menu, press
B
or
b
to
select
Reset
, and then press
OK
.
A confirmation screen appears.
b
Select
Yes
, and then press
OK
.
This feature displays the brightness histogram and control curve
of the current video signal.
a
In the
PICTURE
menu, press
b
to select
Control
Visualization
and press
OK
. The histogram window
will appear.
b
Press
RETURN
to return to the previous menu.
When this television receives a true Widescreen picture and
Auto format
is
On
, it will automatically be displayed in
Widescreen format irrespective of the television’s previous
setting.
a
Press
MENU
and
C
or
c
to select the
PREFERENCES
menu.
b
Press
b
to select
Display Settings
and press
OK
.
c
Press
b
to select
Auto Format
, and then press
C
or
c
to select
On
or
Off
.
When
4:3 Stretch
is activated, the size switching system
changes 4:3 programmes into full screen picture.
a
In the
PREFERENCES
menu, press
b
to select
Display
Settings
, and press
OK
.
b
Press
b
to select
4:3 Stretch
, and then press
C
or
c
to select
On
or
Off
.
When
Blue Screen
is selected, the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
NOTE:
Some external input sounds may not be muted.
a
In the
PREFERENCES
menu, press
b
to select
Blue
Screen
.
b
Press
C
or
c
to select
On
or
Off
.
Control Visualization
Brightness
Number
Of
Pixels
Output
Control Visualization
Distribution
Input
Control Curve
Automatic Format (Widescreen)
4:3 Stretch
Blue Screen
Auto Format On
4:3 Stretch Off
Picture Position
Display Settings
36
CONTROLS AND FEATURES
English
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
a
In the
PREFERENCES
menu, highlight
Display
Settings
and press
OK
.
b
In the
Display Settings
menu, highlight
Picture
Position
.
c
Press
OK
to view the options available for the picture
format that has been selected.
d
Press
B
and
b
to select an option, and then
C
or
c
to adjust the settings.
The options differ depending on the currently selected
widescreen format and the input signal.
In
Cinema
mode:
To return to the original factory settings, select
Reset
in the
Picture Position
menu and press
OK
.
This feature is used to hold a still image on the screen.
Press
r
to hold an image on the screen, and press
r
again to cancel.
When the HDMI Information Display feature is On and you are
watching an HDMI input source, pressing the button
displays the HDMI signal information banner.
a
In the
PREFERENCES
menu, press
b
to select
HDMI
Information Display
.
b
Press
C
or
c
to select
On
.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and
Content Type (if available).
Picture Position
Picture still
HDMI Information Display
Auto Format On
4:3 Stretch Off
Picture Position
Display Settings
0
0
Picture Position
Horizontal Position
Reset
Vertical Position
37
CONTROLS AND FEATURES
English
Using your home network
This TV is a DLNA CERTIFIED™ Player and Renderer.
This TV can play digital content stored on a DLNA
CERTIFIED™ product with server function.
If you want to use this TV as a DLNA CERTIFIED™
Player or Renderer, you will have to configure the
network on your TV (
see page 13
).
If you want to use your home network, you will have
to configure the network on your TV. (
see page 13
)
Change the network settings if necessary (see
‘Setting up the Network’ on page 38).
When using a wireless home network:
Wireless Interoperability
The TOSHIBA Dual Band WLAN Adaptor is designed to be
interoperable with any wireless LAN product that is based on
Direct Sequence Spread Spectrum (DSSS)/Orthogonal
Frequency Division Multiplexing (OFDM) radio technology,
and is compliant to:
• The IEEE 802.11 Standard on Wireless LANs (Revision a/b/
g/n), as defined and approved by the Institute of Electrical
and Electronics Engineers.
• The TOSHIBA Dual Band WLAN Adaptor is intended for use
with the VL74/XL74 series LCD TV’s and should not be used
with any other devices.
Use of the WLAN Adaptor in other USB products may result
in damage to the WLAN Adaptor and or the equipment.
Such use will void any warranty that may otherwise apply,
and TOSHIBA will have no liability for any damage that may
result from such use.
CAUTION
Bluetooth™ and Wireless LAN devices operate within
the same radio frequency range and may interfere
with one another. If you use Bluetooth™ and Wireless
LAN devices simultaneously, you may occasionally
experience a less than optimal network performance
or even lose your network connection.
If you should experience any such problem,
immediately turn off either your Bluetooth™ or
Wireless LAN device.
Actual performance can vary, including lower wireless
network capacity, data throughput rate, range and
coverage.
Performance depends on many factors, conditions and
variables, including distance from the access point,
volume of network traffic, building materials and
construction, operating system used, mix of wireless
products used, interference and other adverse
conditions.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio
frequency electromagnetic energy. The level of energy emitted
by Wireless LAN devices, however, is far less than the
electromagnetic energy emitted by wireless devices such as
mobile phones.
Because Wireless LAN products operate within the guidelines
found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is safe for
use by consumers. These standards and recommendations
reflect the consensus of the scientific community and result
from deliberations of panels and committees of scientists who
continually review and interpret the extensive research
literature.
In some situations or environments, the use of Wireless LAN
may be restricted by the proprietor of the building or
responsible representatives of the organization. Such
restrictions may apply in environments where the risk of
interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of
wireless devices in a specific organization or environment, you
are encouraged to ask for authorization to use the Wireless
LAN device prior to turning on the equipment.
This Dual Band Wireless LAN Adaptor may be operated in the
following countries:
How to use this Dual Band Wireless LAN Adaptor
If this device is going to be operated in the frequency range
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to
2.4835 GHz in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
This device is NOT ALLOWED to be used in the geographical
area within a radius of 20km from the centre of Ny-Alesund
in Norway.
AT
Austria
IS
Iceland
BE
Belgium
LI
Liechtenstein
CH
Switzerland
LT
Lithuania
CY
Cyprus
LU
Luxembourg
CZ
Czech Republic
LV
Latvia
DE
Germany
MT
Malta
DK
Denmark
NL
Netherlands
ES
Spain
NO
Norway
FI
Finland
PL
Poland
FR
France
PT
Portugal
GB
United Kingdom
SE
Sweden
GR
Greece
SI
Slovenia
EE
Estonia
SK
Slovakia
HU
Hungary
BG
Bulgaria
IT
Italy
RO
Romania
IE
Ireland
TR
Turkey
38
CONTROLS AND FEATURES
English
Setting up the Network
You can select the Network Type.
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Network Type
, and then
press
C
or
c
to select
Wired
or
Wireless
.
NOTE:
If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
c
If you selected
Wired
, see “Advanced Network Setup”
on page 40.
NOTE:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
Continued connection of AP (Access Point) is not guaranteed.
The connection may be disconnected while watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type
is set to
Wireless
or wireless communication
is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
WPS is an industry standard designed to make connection of
wireless LAN equipment and security setup easy. WPS will
automatically configure all wireless settings.
Assisted Setup
(setup by using the AP’s notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup
(manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Easy Setup
, and press
OK
.
d
Press
C
or
c
to select
PBC
.
e
Press
b
to highlight
Start Scan
, and press
OK
.
f
Following the on-screen instructions, push the
appropriate button on your AP.
g
When a window reporting that the setup is complete
appears, press
OK
.
To cancel searching for the AP:
Press
RETURN
while searching for the AP. A message
will appear, and then press
C
or
c
to select
Yes
and
press
OK
.
Easy Setup using PIN (Personal Identification
Number)
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Easy Setup
, and press
OK
.
d
Press
C
or
c
to select
PIN
.
e
Press
b
to highlight
Start Scan
, and press
OK
.
f
Press
B
or
b
to select the desired AP and press
OK
.
NOTE:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
g
When the PIN code window appears, enter the
displayed PIN into your AP, and then press
Next
to
continue the PIN Setup. When a message displays to
report that the setup is complete, press
OK
.
Wireless Setup
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Network Type Wired
Network Connection Test
Advanced Network Setup
Network Setup
Wireless Setup
Easy Setup On
Enhanced 11n Off
Manual Setup
Wireless Setup
Assisted Setup
39
CONTROLS AND FEATURES
English
To cancel searching for the AP:
Press
RETURN
while searching for the AP. A message
will appear; then, press
C
or
c
to select
Yes
and press
OK
.
Assisted Setup
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Assisted Setup
, and press
OK
.
d
Press
B
or
b
to select the desired AP and press
OK
.
NOTE:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
e
Highlight
Security Key
and press
OK
. The Software
Keyboard window will appear.
f
Input the Security Key by using the Software Keyboard
(
see page 42
). To save your setting, press the
BLUE
button.
NOTE:
• The Security Key must adhere to these conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP encryption.
g
Highlight
Done
, and then press
OK
.
NOTE:
If
Network Name
is not displayed, see step 4
and 5 in
Manual Setup
below to set
Network Name
before pressing
Done
.
NOTE:
Settings are not saved if
RETURN
is pressed before
Done
is selected.
Manual Setup
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Wireless Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Manual Setup
, and press
OK
.
d
Press
B
or
b
to highlight
Network Name
, and press
OK
. The Software Keyboard window will appear.
e
Input the Network Name by using the Software
Keyboard (
see page 42
). To save your setting, press the
BLUE
button.
f
Press
B
or
b
to highlight
Authentication
, and then
press
C
or
c
to select
Open System
,
Shared Key
,
WPA-PSK
or
WPA2-PSK
.
g
Press
B
or
b
to highlight
Encryption
, and then press
C
or
c
to select
None
,
WEP
,
TKIP
or
AES
.
NOTE:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP or
None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
h
Press
B
or
b
to highlight
Security Key
, and press
OK
.
i
Input the Security Key by using the Software Keyboard
(
see page 42
). To save your setting, press the
BLUE
button.
NOTE:
This item is grayed out when
Encryption
is
None
.
j
Highlight
Done
, and then press
OK
.
NOTE:
When
Encryption
is
None
, a message will
appear. Press
C
or
c
to select
Yes
and press
OK
.
NOTE:
Settings are not saved if
RETURN
is pressed before
Done
is selected.
Enhanced 11n
When
Enhanced 11n
is set to
On
, these features are
available.
• Dual Channel (40MHz)
• GF (Green Field)
NOTE:
In addition, some other optional 11n features will be
enabled.
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
. Highlight
Wireless Setup
and press
OK
.
b
Press
B
or
b
to highlight
Enhanced 11n
, and then
press
C
or
c
to select
On
.
40
CONTROLS AND FEATURES
English
Wireless Information
The settings configured in Wireless Setup can be confirmed.
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select
Wireless Information
and
press
OK
.
c
When the AP connection succeeds, a Wireless
Information window will appear.
NOTE:
Press the
RED
button to scan for all available
APs.
NOTE:
Even if an AP for IEEE 802.11n is used when
Encryption
is set to
WEP
or
TKIP
, the Speed value might be
low. It is recommended that
Encryption
be changed to
AES
(see “Manual Setup” on
see page 39
).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
Content playback may be interrupted by various surrounding
interference.
NOTE:
When the DHCP function of the router connected with this TV
is On, you can set
Auto Setup
to
On
or
Off
.
(This should usually be set to
On
.)
When the DHCP function of the router is Off, set
Auto Setup
to
Off
, and set the IP Address manually.
IP Address Setup
Auto Setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network
Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
IP Address Setup
, and
press
OK
.
Item Description
Status
Connected
is displayed when the TV is
connected with the AP.
Disconnected
is displayed when the TV is
not connected with the AP.
Signal Connection signal strength with AP
(
STRONG
/
MEDIUM
/
WEAK
)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel Channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed when
the TV is connected with the AP.
USB MAC
Address
The MAC address of the USB (Dual Band
WLAN Adaptor) is displayed.
DHCP
Enabled
is displayed when using DHCP.
Disabled
is displayed when not using
DHCP.
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS Address of the DNS
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Advanced Network Setup
Network Type Wired
Advanced Network Setup
Network Setup
Wireless Setup
IP Address Setup Wired
MAC Address
DNS Setup
Advanced Network Setup
41
CONTROLS AND FEATURES
English
d
Highlight
Auto Setup
, and then press
C
or
c
to select
On
.
NOTE:
Other items will be grayed out when
Auto Setup
is set
to
On
.
Manual Setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
IP Address Setup
, and
press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
Off
.
e
Press
B
or
b
to highlight
IP Address
.
f
Press
C
or
c
to highlight the field you want to change,
and then use the number buttons to input the IP
address. To save the setting, press
OK
.
NOTE:
IP address field numbers must be between 0
and 255. After each field number has been set, press
OK
to store the entire address. If the entire IP Address
is invalid, a warning message will appear after
OK
is
pressed.
g
Press
B
or
b
to highlight
Subnet Mask
, and edit in
the same way as IP Address.
h
Press
B
or
b
to highlight
Default Gateway
, and edit
in the same way as IP Address.
NOTE:
If you manually set the IP address, you must not use the
same IP address for any other device. The IP address you use
should be a private address.
NOTE:
When the DHCP function of the router connected to
this TV is Off, set Auto Setup to Off, and manually set the DNS
address(es). Your internet service provider should have
provided these to you.
Auto setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
DNS Setup
, and press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
On
.
NOTE:
Other items will be grayed out when
Auto Setup
is set
to
On
.
Manual setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
DNS Setup
, and press
OK
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
Off
.
e
Press
B
or
b
to highlight
Primary DNS Address
.
f
Press
C
or
c
to highlight the field you want to change,
and then use the number buttons to input the Primary
DNS Address. To save the setting, press
OK
.
NOTE:
DNS address field numbers must be between 0
and 255. If you input an incompatible number and
press
OK
, the field number will reset to the previous
value.
Auto Setup On
Subnet Mask
IP Address Setup
IP Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway
. . .
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway
. . .
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
Default Gateway
. . .
DNS Setup
Auto Setup Off
Secondary DNS Address
DNS Setup
Primary DNS Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
42
CONTROLS AND FEATURES
English
g
Press
B
or
b
to highlight
Secondary DNS Address
,
and edit in the same way as Primary DNS Address.
MAC Address
You can view the fixed MAC address for the TV and for the Dual
Band WLAN Adaptor, if one is installed.
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
OK
.
c
Press
B
or
b
to highlight
MAC Address
, and press
OK
.
This function checks the Internet connectivity.
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
OK
.
b
Press
B
or
b
to highlight
Network Connection Test
,
and press
OK
.
A message will appear to indicate if the connection
was successful or if it could not be completed.
NOTE:
The result of Network Connection Test does
not always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.
To cancel the Network Connection Test:
a
Press
RETURN
while searching for the Internet
connection.
Using the software keyboard
You can enter text by using the Software Keyboard.
The Software Keyboard window will appear when
you press
OK
on a field that accepts character input.
To enter text using the software keyboard:
a
Highlight the desired character on the on-screen
software keyboard.
b
Press
OK
.
c
Repeat steps 1 and 2 until you have entered all desired
text.
d
Press the
BLUE
button to close the software keyboard
and return to the previous screen.
NOTE:
If
RETURN
is pressed, changes are not saved
and the software keyboard window is closed. The text
will remain as it was before starting the keyboard.
Input operation on the remote control:
Network Connection Test
Button Description
OK
Inputs the selected character.
0-9 Inputs the number directly.
B
b
C
c
Moves the character highlight.
CC
cc
Moves the cursor.
Z
Moves the cursor to the head of a
character string.
z
Moves the cursor to the end of a
character string.
RED Deletes 1 character to the left of
the cursor.
GREEN Cycles through upper case, lower
case, numbers, and symbols, if
available.
YELLOW Chooses an accented version of
the current letter, if applicable.
BLUE Saves changes and closes the
Software Keyboard window.
RETURN Closes the Software Keyboard
window without saving changes.
A BC DE F G
A a1@
AAA|
HIJKLMN
OPQRSTU
VWX YZ
43
CONTROLS AND FEATURES
English
Setting up the Media
Renderer feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR. When
operating as a DMR, the TV displays content
provided by a DMS. The selection of the media is
done by the DMC - the TV does not select the input.
The TV can play photo, movie, or audio files when
operating as a DMR.
You can configure the DMR settings individually, or use
Installation mode to be prompted for each setting in order.
a
In the
PREFERENCES
menu, highlight
Media
Renderer Setup
and press
OK
.
b
Press
B
or
b
to highlight
Installation
, and press
OK
.
c
Press
C
or
c
to select
On
, and press
OK
.
d
If you want to change the device name as a Renderer,
highlight the
Device Name
field and press
OK
. The
Software Keyboard window will appear.
e
Input the Device Name by using the Software
Keyboard (
see page 42
). Press the
BLUE
button.
NOTE:
The Device Name can be up to 127 characters
long.
f
Highlight
Done
, and then press
OK
to save your
setting.
g
If you want to change the password, press
C
or
c
to
select
Yes
, and then press
OK
.
h
Change the password by using the Software Keyboard
(
see page 42
), and then press the
BLUE
button.
NOTE:
The Web Password can be up to 15 characters
long.
i
Highlight
Done
, and then press
OK
.
j
If you want to limit access from unexpected DMCs,
press
C
or
c
to select
On
, and then press
OK
.
k
If you want to proceed with registration of DMCs, press
C
or
c
to select
Yes
, and then press
OK
.
l
Press
B
or
b
to highlight the item you want to accept,
and press
OK
. A check will appear in the box. To
remove the check, press
OK
again.
m
Press
c
to highlight
Done
, and then press
OK
.
The
Maximum Volume Setup
window appears. Press
C
or
c
to adjust to the desired volume. Then, press
OK
.
a
In the
PREFERENCES
menu, highlight
Media
Renderer Setup
and press
OK
.
b
Press
B
or
b
to highlight
Media Renderer
, and then
press
C
or
c
to select
On
or
Off
.
The TV’s DMR device name can be changed. The device name
can be confirmed from the DMC.
a
In the
PREFERENCES
menu, highlight
Media
Renderer Setup
and press
OK
.
b
Press
B
or
b
to highlight
Device Name Setup
, and
press
OK
.
c
Highlight the
Device Name
field and press
OK
. The
Software Keyboard window will appear.
d
Input the Device Name by using the Software
Keyboard (
see page 42
). Press the
BLUE
button.
NOTE:
The Device Name can be up to 127 characters
long.
e
Highlight
Done
, and then press
OK
to save your
setting.
Installation
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Media Renderer
Device Name Setup
44
CONTROLS AND FEATURES
English
This setup determines the password that is necessary for the
DMC to access built-in web pages on the DMR.
a
In the
Media Renderer Setup
menu, highlight
Web
Password Setup
, and press
OK
. Highlight the
Password
field and press
OK
. The Software Keyboard
window will appear.
b
Change the password by using the Software Keyboard
(
see page 42
), and then press the
BLUE
button.
NOTE:
• The Web Password can be up to 15 characters long.
• Only the password can be changed. User ID cannot
be changed.
c
Highlight
Done
, and then press
OK
.
NOTE:
Some DMCs can view or modify the device name of the DMR.
Depending on the TV’s state, it may not be possible to set the
device name from the web page.
• Review the owner’s manual of the DMC to confirm the
method for accessing web pages.
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a check will
be allowed to control the TV.
a
In the
Media Renderer Setup
menu, highlight
Media Controller Setup
and press
OK
.
b
Press
B
or
b
to highlight
Access Control
, and then
press
C
or
c
to select
On
.
c
Press
B
or
b
to highlight
Select Media Controller
,
and press
OK
.
d
Press
B
or
b
to highlight the item you want to accept,
and press
OK
. A check will appear in the box.
To remove the check, press
OK
again.
e
Press
c
to highlight
Done
, and then press
OK
.
NOTE:
• You can select up to 8 DMC devices.
If you would not like to limit the DMCs for this TV, set
Access
Control
to
Off
.
• Devices other than DMCs may be displayed in the list.
Confirm the MAC address of the DMC and set it.
This feature allows you to set the maximum volume of the TV
when it receives volume operation commands from a DMC.
a
In the
Media Renderer Setup
menu, highlight
Maximum Volume Setup
, and press
C
or
c
to adjust
to the desired volume.
NOTE:
• The TV’s remote control can set volume regardless of the
value of
Maximum Volume Setup
.
• When DMR playback ends, the TV volume will return to the
value in effect when DMR playback was started.
Web Password Setup
Media Controller Setup
Maximum Volume Setup
45
CONTROLS AND FEATURES
English
Using YouTube™
YouTube is a video-sharing service managed by
YouTube, LLC.
This TV allows you to view YouTube content.
NOTE:
• You need to configure a home network before using this
feature (see page 13).
•If
Network Lock
is set to
On
, it will be necessary to enter
your four-digit PIN code in order to access network features
(see page 61).
a
In the
APPLICATIONS
menu, highlight
YouTube
and
press
OK
.
b
Press
B
,
b
,
C
or
c
to select the file you want to view,
and press
OK
.
To close YouTube:
a
Press
EXIT
.
NOTE:
• This TV may not be able to perform all of the same
operations as a computer.
• Depending on the network environment and use case, you
may experience difficulty viewing content.
• Though the same volume value, actual volume might be
greatly different depending on contents.
• It may take time for the TV to load and begin playing back
content.
Service content and the look and feel of the interface may be
changed at any time without prior notice.
The Function Menu provides easy access to functions that are
commonly used.
a
Press the
BLUE
button while displaying YouTube.
The Function menu window will appear.
b
Press
C
or
c
to select the desired icon, and press
OK
.
Switching the pointer
The tool that operates the screen can be changed to pointer or
drag mode.
a
From the Function menu, press
C
or
c
to select
Pointer
, and then press
OK
.
b
If you select , see “To use the Pointer: ON” on this
page. If you select , see “To use the Drag Mode”
on this page.
To use the Pointer: ON:
a
Press
B
or
b
to select
Pointer: ON
, and press
OK
.
will appear.
b
Press
B
,
b
,
C
or
c
to the place where changes to
, and then press
OK
.
NOTE:
When
Pointer: OFF
is selected and
B
,
b
,
C
or
c
is
pressed, the highlight moves to linked areas.
APPLICATIONS
Programme Timers
YouTube
On Timer
Media Player
Sleep Timer 00:00
Using the Function Menu
Item Description
Back Returns to the previous page.
Forward Moves to the forward page.
Reload/
Abort
Updates the displayed page./
Aborts update
( is displayed while reading, and is
displayed in other case.)
Home Returns to the top page of YouTube.
Pointer Switches the pointer On/Off or drag mode.
Menu Switches the frame or sets various settings.
http://www.youtube.com/xl
Back
Forward
Pointer
Menu
Reload
Home
46
CONTROLS AND FEATURES
English
To use the Drag Mode:
a
Press
B
or
b
to select
Pointer: ON
, and press
OK
.
b
Press the
BLUE
button.
c
From the Function menu, press
C
or
c
to select
Pointer
, and then press
OK
.
d
Press
B
or
b
to select
Drag Mode
, and press
OK
.
will appear.
e
Press
OK
, and then changes to .
f
Press
B
,
b
,
C
or
c
to move the selected item in the
desired place.
Switching the frame
a
From the Function menu, press
C
or
c
to select
Menu
,
and then press
OK
.
b
Press
C
or
c
to select
Page Tasks
.
c
Highlight
Switch Frames
, and press
OK
.
Setting the view feature
a
From the Function menu, press
C
or
c
to select
Menu
,
and then press
OK
.
b
Press
C
or
c
to select
View
.
c
Press
B
or
b
to select the desired item, and press
OK
.
d
Press
B
or
b
to select the desired setting, and press
OK
.
If you select Advanced Settings:
a
Press
B
,
b
,
C
or
c
to select the setting items, and
press
OK
. A check will appear in the box. To remove
the check, press
OK
again.
b
Press
B
,
b
,
C
or
c
to select OK field, and press
OK
.
Setting other features
a
From the Function menu, press
C
or
c
to select
Menu
,
and then press
OK
.
b
Press
C
or
c
to select
Settings
.
c
Press
B
or
b
to select the desired item, and press
OK
.
d
Press
B
or
b
to select the desired setting, and press
OK
.
Item Settings
Display
Mode
Normal
: Displays YouTube page with the
size as it is.
Just-Fit Rendering
: Displays YouTube page
at a size that has been adjusted to precisely
fit the width of your TV.
Text Size Changes the font size of the screen. Select
from
Largest
,
Large
,
Medium
,
Small
or
Smallest
.
NOTE:
This font size is effective only for the
page.
Advanced
Settings
See the next column.
Page
Information
Displays the information of the page you are
viewing.
Server
Certificates
Displays the server certification.
Item Description
Image Sets display/non-display of images.
Table Sets effect/non-effect of tables.
CSS Sets effect/non-effect of CSS.
Pop-up
window
Sets effect/non-effect of pop-up windows.
Animation Sets display/non-display of animations.
JavaScript Sets effect/non-effect of JavaScript.
Word wrap Sets effect/non-effect of Word Wrap. If Word
Wrap is enabled, a word not finished at the
end of a line is shifted to the next line.
Rapid-
Render
Sets effect/non-effect of Rapid-Render. If
Rapid-Render is enabled, texts and links are
displayed first, and the images and the
tables, etc. are displayed afterward. The
highlight can be moved with the text and the
link displayed.
47
CONTROLS AND FEATURES
English
NOTE:
• Cookie is the technical information that a website leaves in
this TV so that the website will recognize you when you use
it again.
• Cache is a system used to shorten the display time by
checking the past data preserved in this television when a
page that you viewed before is seen again.
To confirm Root Certificates or CA Certificates:
a
Press
B
or
b
to select
Security
in step3 in
Setting
other features
.
b
Press
B
,
b
,
C
or
c
to select
Root Certificates
or
CA
Certificates
, and press
OK
.
c
Press
B
or
b
to select the desired certificate.
• When
OK
is pressed, a detailed information window
will appear.
• When the
BLUE
button is pressed,
Disable
or
Enable
bar will appear. It changes whenever
BLUE
button is pressed.
d
Press
RETURN
.
Using the Media Player
The VL74/XL74 series TV allows you to enjoy movie,
music and photo files stored on a USB device
connected to the USB 1 port (USB 2 provide access
to photos only).
Moreover, you can also play photos, movies or
music files from your PC by connecting the TV to
your home network.
Terminology:
DMP: DLNA CERTIFIED™ Player
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
• DMP: The TV can control and play content from a DMS.
- A DMS is a device that can function as a server for DMP or
DMR.
• DMR: The TV can play content from a DMS. Playback is
controlled by a DMC.
- A DMC is a device that can instruct the TV to display
content.
NOTE:
• Do not insert/remove USB device while in use.
• MENU is not available during playback.
When you want to use your TV as a DMR, set Media Renderer
to On (see “Media Renderer” on page 43).
Media Player Specifications
Device
USB device
Interface version: USB2.0 HS
USB Mass Storage Class devices (MSC)
NOTE:
• Connectivity is not guaranteed for all devices.
Incorrect behavior may occur with a USB hub connection.
File system: FAT12, FAT16 and FAT32, NTFS
Maximum memory size: Unlimited
DLNA CERTIFIED™ Server: Your PC (for example)
Item Settings
Security When jumping from a protected page to an
unprotected page, the message is displayed
when the check is applied to
Notify of
secure/non-secure page changes
.
Apply the check to select SSL version from
SSL Version to use (SSL2.0, SSL3.0,
TSL1.0)
.
A content confirmation of the certification
and a setting effect/non-effect can be done
in
Root Certificates
and
CA Certificates
shown below.
Cookies
Accept all
: Cookie is received, and it records
in this TV.
Reject all
: Cookie is not received.
Prompt before accepting
: When Cookie is
received, a message window will be
displayed.
Delete
Cookies
Deletes all recorded Cookies.
Cache
Use cache
: When the check is applied to
this, cache is used.
Delete All Cache Data
: Deletes all the
cache preserved in the television.
Browser
Information
Displays the information on a browser.
You must obtain any required permission from
copyright owners to download or use copyrighted
content. TOSHIBA cannot and does not grant such
permission.
48
CONTROLS AND FEATURES
English
Using Media Player with USB
When Auto Start is enabled, you will be asked if you
want to start the Media Player whenever a USB device
is inserted. If Auto Start is disabled (or if you want to
connect to a DMS on the network), you must manually
start the Media Player from the menu.
To change the Auto Start setting:
a
Press
MENU
and
C
or
c
to select the
APPLICATIONS
menu.
b
Press
b
to select
Media Player
, and press
OK
.
c
Press
B
or
b
to select
SETUP
, and press
OK
.
d
Press
B
or
b
to select
USB Auto Start
, and then press
C
or
c
to select
On
or
Off
.
Auto Start:
a
Insert USB device into the USB socket on the right side
of the TV. A prompt will appear.
b
Press
C
or
c
to select
Yes
, and then press
OK
.
c
Press
B
or
b
to select
Photo
,
Movie
, or
Music
and
press
OK
.
NOTE:
If
Auto Start
is set to
Off
, you can start the Media
Player manually.
Manual Start:
a
Insert USB device into the USB socket on the right side
of the TV.
b
In the
APPLICATIONS
menu, select
Media Player
,
and press
OK
.
c
Press
B
or
b
to select
Photo
,
Movie
or
Music
and
press
OK
.
To select a file in the list of contents:
a
Press
B
or
b
to select a file or folder.
b
Press
OK
to move to the next layer, or press
RETURN
to return to the previous layer.
To close the Media Player:
a
Press
EXIT
.
Using the Media Player with a DLNA CERTIFIED™
Server
You need to configure a home network before using
this feature (
see page 13
).
a
In the
APPLICATIONS
menu, highlight
Media
Player
, and then press
OK
.
b
Press
B
or
b
to select
Photo
,
Movie
, or
Music
and
press
OK
. The thumbnail (for Photo) or list of files (for
Movie and Music) will appear.
NOTE:
If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press
OK
.
c
Press
B
or
b
to select a DMS if the selection window
is displayed.
Basic operation
APPLICATIONS
Programme Timers
YouTube
On Timer
Media Player
Sleep Timer 00:00
USB Auto Start On
Media Server Setup
Setup
DivX
®
VOD
Photo
Movie
Music
Setup
Media Player
49
CONTROLS AND FEATURES
English
To select a file in the list of contents:
a
Press
B
or
b
to select a file or folder.
b
Press
OK
to move to the next layer, or press
RETURN
to return to the previous layer.
To close the Media Player:
a
Press
EXIT
.
To display the device information:
a
Press
QUICK
to open the
Quick Menu
in list mode or
Multi View mode.
b
Press
B
or
b
to select
Device Information
.
Setting DLNA CERTIFIED™ Server waking up:
You only need to complete the Media Server Setup if
you wish to use the “Wake-on-LAN” feature.
a
In the
APPLICATIONS
menu, highlight
Media
Player
, and then press
OK
.
b
Press
B
or
b
to highlight
Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Media Server Setup
, and
press
OK
. A list of currently available DMSs will
appear.
d
Press
B
or
b
to select the desired device, and press
OK
. A check will appear in the box. To remove the
check, press
OK
again.
e
Press
c
to highlight
Done
, and then press
OK
to save.
NOTE:
• Up to 8 DMSes can be selected.
Even if the device checked is powered off, it will be displayed
but grayed out in the
Select Device
window. When
OK
is
pressed on a highlighted grayed out item, a confirmation of
Wake-on-LAN is displayed. The TV tries to wake up the DMS
if
Yes
is pressed. The Server will start if it supports Wake-on-
LAN feature.
• When some DMSs are connected, it may take time until the
list is displayed. The list may be refreshed by the following
operation.
- The device selection window is closed once and it is
displayed again.
-The
RED
button is pressed.
There are three types of viewing modes.
Multi View
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each image
file.
The initial highlighted position will be on the top left thumbnail
in the Multi View.
a
Press
B
b
C
c
to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing
C
at the top left thumbnail, the screen will
move to the previous page. Conversely, when pressing
c
at the bottom right thumbnail, the screen will move
to the next page.
P
U
P
u
buttons can be used to page up/down the
photo list when there are more photos than will fit onto
one screen. When the
P
U
P
u
buttons are pressed, the
highlight shall be on the photo at the top left of
Previous/Next list.
b
When you select a folder, press
OK
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
Press
OK
to view the selected photo in Single View
mode.
NOTE:
When the TV is used as a DMR, this feature is not
available.
Viewing photo files
Photo
/Folder Sort: Title
1/54
E05265464.jpg
10:00 Fri, 21 Feb 2010
1920x1080
Page BackSelectOK P RETURN
QUICK
Features
50
CONTROLS AND FEATURES
English
Single View
In this mode, only files located in the selected directory will be
displayed. This view allows you to change the photo content
manually. When moving from Multi View to Single View, the
currently selected photo will be displayed.
a
Press
c
to view the next photo. Press
C
to view the
previous photo.
b
Press
B
to rotate the image 90° clockwise. Press
b
to
rotate the image 90° counterclockwise.
c
Press to display file status information (file
number, photo title, date and time taken, resolution
etc.).
NOTE:
The information may not be correctly displayed
depending on the content, DMC or DMS.
Slide Show
This view allows you to watch a slide show of your photos. In
this mode, only files located in the selected directory will be
played.
a
To start slideshow, press
OK
in the Single View mode.
b
Press
C
/
c
to view the previous/next photo.
c
Press
B
or
b
to rotate the photo.
d
Press to display file status information.
To set Interval Time and Repeat settings:
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select either
Interval Time
or
Repeat
.
c
Press
C
or
c
to adjust the setting and press
OK
.
To sort the folders and files
a
Press
QUICK
to open the
Quick Menu
from Multi
View mode.
b
Press
B
or
b
to select
Sort
.
c
Press
C
or
c
to select
Title/File Name
,
New
or
Old
to set the sorting rule.
NOTE:
Sorting may not be supported by some DMSs.
To display the device information
a
Press
QUICK
to open the
Quick Menu
from Multi
View mode.
b
Press
B
or
b
to select
Device Information
.
NOTE:
When the photos on the USB device are used, or the TV
is used as a DMR, this feature is not available.
To close the Photo Viewer
a
Press
EXIT
. The television will return to the last viewed
channel or external input.
File Compatibility
USB device:
See page 81.
Content on DLNA CERTIFIED™ Server:
Data compatibility: JPEG EXIF Ver.1.x or later, JFIF 1.02a
File format: JPEG
Maximum photo resolution: 4096 x 4096
Maximum photo size: 6 MB
Maximum number of files: 2000 / folder
Item Description
Title (DMS)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order
File Name
(USB)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order
New
From new to old according to the date and
time when the picture was taken.
Old
From old to new according to the date and
time when the picture was taken.
51
CONTROLS AND FEATURES
English
You can select movies from a list of available files.
a
Press
B b
to select a file or folder.
P
U
P
u
buttons can
be used to page up/down the movie list when there
are more files than will fit onto one screen.
b
When you select a folder, press
OK
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
With the desired file selected, press
OK
or PLAY
(
c
) to start playback.
NOTE:
• On preview screen, if you highlight the file without
pressing
OK
, the content is played on a preview
screen. When
OK
is pressed, it is played in full
screen mode.
Depending on the file size, it may take some time to
start playback.
d
Press
v
to stop playback.
NOTE:
• If playback finishes before
v
is pressed, the screen will
return to the list of available file.
• Depending on the file size, it may take some time for
playback to begin.
About the AVCHD folder structure:
If a “PRIVATE” folder exists directly under the root folder on the
connected device, two selection screens (
Digital Video
Camera
and
Other
) will be displayed when the device is
selected.
When
Digital Video Camera
is selected, a list containing
only AVCHD content will be displayed.
Other
is for a conventional List.
NOTE:
If you change the structure or modify any of the folder
or file names under the “PRIVATE” folder, the list display as
well as movie playback may not function correctly.
During playback:
•Press
W
/
w
to pause.
You can move to the desired replay position by pressing
C
or
c
during PAUSE (DMS only).
PAUSE or operations during PAUSE may not be available
depending on the contents, DMC or DMS.
• To resume normal playback, press PLAY(
c
).
• To play in fast reverse or fast forward directions, press
CC
or
cc
during playback. Each time you press the
CC
or
cc
,
the playback speed will change.
• To locate a specific file, press
Z
or
z
repeatedly.
• Press to display the file status information (content
number, movie title, progress time etc.).
NOTE:
The information may not be correctly displayed depending
on the contents, DMC or DMS.
During playback, you can adjust the PICTURE, Picture Size
and SOUND menu functions from the
Quick Menu
.
To select subtitle and audio languages
•Press
SUBTITLE
repeatedly to select your preferred subtitle
language.
•Press
s
repeatedly to select your preferred audio
language.
To set the repeat mode
a
Press
QUICK
to open the
Quick Menu.
b
Press
C
or
c
to select
Off
,
All
or
1
.
c
Press
RETURN
.
NOTE:
When the TV is used as a DMR, this feature is not
available.
Viewing movie files (on a DLNA
CERTIFIED™ Server or USB device)
Movie list example
Movie
/Folder Total Time Sort: Title
00:00:00 / 00:00:00
1
Page BackOK P RETURN
QUICK
FeaturesPlay
2/16
Movie 1
Movie 2
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
Equipment (Root)
PRIVATE
AVCHD
AVCHD files
(Do not edit)
Mode Description
Off
The file is played back only once.
All
Files in the same folder are repeatedly
played back.
1
The same file is repeatedly played back.
52
CONTROLS AND FEATURES
English
To sort the folders and files
a
Press
QUICK
to open the
Quick Menu
in list mode.
b
Press
B
or
b
to select
Sort
.
c
Press
C
or
c
to select
Title/File Name
,
New
or
Old
to set the sorting rule.
NOTE:
Sorting may not be supported by some DMSs.
To display the device information
a
Press
QUICK
to open the
Quick Menu
in list mode.
b
Press
B
or
b
to select
Device Information
.
NOTE:
When the movies on the USB device are used, or the
TV is used as a DMR, this feature is not available.
To close the Movie Viewer
a
Press
EXIT
.
File Compatibility
USB device:
See page 81.
Content on DLNA CERTIFIED™ Server:
File format: MPEG2 PS, MPEG2 TS, AVCHD*, MP4*
Video: MPEG2(PS) PAL, MPEG2(TS) PAL, MPEG2(PS) NTSC,
MPEG2(TS) NTSC, H.264*
Audio: LPCM, MPEG1-Layer1, MPEG1-Layer2, MPEG2-
Layer2, AC3, AAC
Maximum number of files: 1000 / folder
* Some files may not be played.
To register your TV to a DivX
®
account
This TV allows you to play back files purchased or rented from
DivX
®
Video-On Demand (VOD) services. When you purchase
or rent DivX
®
VOD files on the internet, you will be asked to
enter a registration code.
a
In the
APPLICATIONS
menu, press
b
to highlight
Media Player
, and then press
OK
.
b
Press
B
or
b
to highlight
DivX
®
VOD
, and then press
OK
.
c
Press
B
or
b
to highlight
DivX
®
VOD Registration
,
and then press
OK
.
d
The
DivX
®
VOD
window will appear and you will see
the registration code. For details on registration,
please visit the DivX
®
website at
http://vod.divx.com
e
Copy the activation file to a memory device and play it
on the TV.
To deactivate your device
a
In step 3 above, highlight
DivX
®
VOD
Deactivation
,
and then press
OK
.
b
A confirmation message will appear. Select
Yes
, and
then press
OK
.
c
The
DivX
®
VOD
window will appear and you will see
the deactivation code. For details on registration,
please visit the DivX
®
website at
http://vod.divx.com
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by
DivX, Inc. This is an official DivX Certified device that plays DivX
video. Visit www.divx.com
for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be registered in order to play DivX Video-on-
Demand (VOD) content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go to
vod.divx.com
with this code to complete the registration
process and learn more about DivX VOD.
Item Description
Title (DMS)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order
File Name
(USB)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), alphabet (A, B, ..., Z)
3. Increasing order
New
From new to old according to the date and
time when the contents were updated.
Old
From old to new according to the date and
time when the contents were updated.
DivX
®
VOD Registration
DivX
®
VOD Deactivation
DivX
®
VOD
53
CONTROLS AND FEATURES
English
You can listen to music from a list of available files.
a
Press
B b
to select a file or folder.
P
U
P
u
buttons can
be used to page up/down the music list when there are
more files than will fit onto one screen.
b
When you select a folder, press
OK
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
With the desired file selected, press
OK
or PLAY
(
c
) to start playback.
NOTE:
On preview screen, if you highlight the file
without pressing
OK
, the content is played on a
preview screen. When
OK
is pressed, it is played in full
screen mode (for DMS only).
d
Press
v
to stop playback.
NOTE:
• Depending on the file size, it may take some time for
playback to begin.
During playback, you can adjust the
SOUND
menu functions
from the
QUICK Menu
.
During playback:
•Press
W
/
w
to pause.
• To resume normal playback, press PLAY(
c
).
• You can move to the desired replay position by pressing
C
or
c
during PAUSE (for DMS only).
• PAUSE or operations during PAUSE may not be available
depending on the content, DMC or DMS.
• To play in fast reverse or fast forward directions, press
CC
or
cc
. Each time you press
CC
or
cc
, the playback speed
will change.
To display the music list, press the RED button (for USB only).
To set the repeat mode:
a
Press
QUICK
to open the
Quick Menu
.
b
Press
C
or
c
to select
Off
,
All
or
1
.
c
Press
RETURN
.
NOTE:
When the TV is used as a DMR, this feature is not
available.
To set the shuffle mode:
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select
Shuffle
.
c
Press
C
or
c
to select
On
or
Off
.
To sort the folders and files
a
Press
QUICK
to open the
Quick Menu
in list mode.
b
Press
B
or
b
to select
Sort
.
c
Press
C
or
c
to select
Title/File Name
,
New
or
Old
to set the sorting rule.
NOTE:
Sorting may not be supported by some DMSs.
Playing music files (on a DLNA
CERTIFIED™ Server or USB device)
Music
/Folder Sort: Title
Title:
Artist:
Music 1
Music 2
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
WWWWWWWWW 00:00:00
Total Time
Page BackOK P RETURN
QUICK
FeaturesPlay
00:00:00 / 00:00:00
1
2/16
Music list example
Mode Description
Off
USB: Files in the same folder are played
back once.
DMS: A file is played back once.
All
Files in the same folder are repeatedly
played back.
1
The same file is repeatedly played back.
Item Description
Title (DMS)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z),
small alphabet (a, b, ..., z)
3. Increasing order
File Name
(USB)
File sorting rules:
1. Unicode priority
2. (0, 1, ..., 9), alphabet (A, B, ..., Z)
3. Increasing order
New
From new to old according to the date and
time when the contents were updated.
Old
From old to new according to the date and
time when the contents were updated.
54
CONTROLS AND FEATURES
English
To display the device information
a
Press
QUICK
to open the
Quick Menu
in list mode.
b
Press
B
or
b
to select
Device Information
.
NOTE:
When the music files on the USB device are used, or the
TV is used as a DMR, this feature is not available.
To display the file status information
a
Press during playback. The information will be
displayed on the bottom of the screen.
b
Press again to remove the information.
NOTE:
The information may not be correctly displayed
depending on the content, DMC or DMS.
To close the Music Player:
a
Press
EXIT
.
File Compatibility
USB device:
See page 81.
Content on DLNA CERTIFIED™ Server:
File format: Linear PCM, MP3
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Bit rate: from 32 to 320 kbps
Maximum number of files: 1000 / folder
Using the Photo Frame
feature
You can use the TV screen as a digital photo frame. One image
(pre-installed or user-installed) can be displayed. Date info
can also be superimposed, if desired.
You can overwrite the photo file with a file from a USB storage
device or DLNA CERTIFIED™ Server.
Open from Menu
a
Press
MENU
and
C
or
c
to select the
PREFERENCES
menu.
b
Press
b
to select
Photo Frame Setup
, and then press
OK
.
The preview screen will appear.
To open Photo Frame
Network Setup
Media Renderer Setup
Panel Lock
Display Settings
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Network Lock
Off
PREFERENCES
Photo Frame Setup
Photo Select
Photo Edit
Settings
Start
BackEnterOK RETURN
55
CONTROLS AND FEATURES
English
c
Press
c
to select
Start
, and then press
OK
to open
Photo Frame
.
To open from the Quick Menu
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select
Photo Frame
, and then press
OK
to open
Photo Frame
.
To close Photo Frame:
a
Press
EXIT
.
In the preview screen, you can set various settings for Photo
Frame.
Photo Select
a
In the
Photo Frame Setup
menu, press
B
or
b
to
select
Photo Select
, and then press
OK
.
b
If the device selection screen appears, press
B
or
b
to
select the appropriate device, and then press
OK
.
c
Press
B b C c
to select the photo you want to copy
from the USB storage device or DLNA CERTIFIED™
server to the TV’s flash memory, and then press
OK
.
Photo Edit
a
Press
B
or
b
to select
Photo Edit
, and then press
OK
.
b
Press
B
or
b
to select
Rotate
or
Delete
.
c
Set the following items as required.
Rotate
— Press
OK
to rotate the image
90°clockwise.
Delete
— Press
OK
. A confirmation window will
appear. Press
C
or
c
to select
YES
, and then press
OK
.
d
Press
RETURN
.
Setting the features
Photo Frame Setup
Photo Select
Photo Edit
Settings
Start
BackEnterOK RETURN
Photo Select
/Folder
1/54
E05265464.jpg
06:36 Tue, 26 Apr
1920 x 1080
SelectOK Page BackP RETURN
OK RETURN
Photo Edit
Rotate
Delete
BackEnter
56
CONTROLS AND FEATURES
English
Settings
a
Press
B
or
b
to select
Settings
, and then press
OK
.
b
Press
B
or
b
to select
Clock
,
Position
or
Auto Power
Off
.
c
Set the following items as required.
Clock
— Press
C
or
c
to select
Off
,
Digital
Clock
,
Analogue Clock
or
Analogue + Digital
.
Position
— Press
C
or
c
to select
Left
or
Right
.
Auto Power Off
— Press
C
or
c
to select
Off
,
00:30
,
01:00
,
02:00
,
04:00
,
06:00
or
12:00
.
If the Photo Frame window is left open, the TV will
automatically turn off after the set length of time
(maximum 12 hours).
d
Press
RETURN
.
e
Select
Start
, and then press
OK
.
NOTE:
• The clock display will only appear when time from a digital
broadcast is available.
• The photo and clock displays are moved by 4 dots every 5
minutes to minimize the risk of screen burn-in.
The pre-installed photo file is stored in the TV’s flash memory
before shipment.
• Picture Size selection (Normal/ Dot by Dot) is available by
pressing the QUICK button. However when the resolution is
1920 x 1080 or above, the Picture Size selection menu will
be grayed out.
Other features
Panel Lock
disables the buttons on the television. All buttons on
the remote control can still be used.
a
In the
PREFERENCES
menu, select
Panel Lock
and
choose
On
or
Off
using
C
or
c
.
When
Panel Lock
is
On
, a reminder will appear when the
buttons on the television are pressed.
If the standby button
is pressed
,
the television will switch off and can only be
brought out of standby by using the remote control.
OK RETURN
Settings
Clock Off
Left
Off
Position
Auto Power Off
BackEnter
--/-- (---)
-- 10:10
Apr/26 (Tue)
AM 10:53
Panel Lock
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
57
CONTROLS AND FEATURES
English
The timers
This feature will set the television to go to a specific channel at
a certain time. It can be used to view a particular programme,
or by setting the mode to daily or weekly, can be used to view a
series of programmes.
a
Press
MENU
and
C
or
c
to select the
APPLICATIONS
menu.
b
Press
b
to select
Programme Timers
, and then press
OK
.
c
Press
b
if necessary to select an open timer position,
then press
OK
. The
Edit Timer
menu will now appear
on screen.
d
Press
B
and
b
to go through the list adding the details
of the programme by using the number buttons and
C
and
c
to make selections.
e
When all of the details have been entered, highlight
Set Timer
and press
OK
to save the timer.
The ORANGE/RED programme timer indicator on the
front of the television will be lit (see page 76 for details).
PLEASE NOTE:
When a timed programme is about to start, an
information screen will appear offering the option of watching
or cancelling the programme. The menus and other channels
will not be available during the timed programme unless the
programme timer is cancelled. The programme timer you set
is not performed when the TV is turned off with the
!
POWER
switch.
It will only be possible to create or edit programme timers for
the currently tuned DTV input.
The feature allows you to set the television to turn on
automatically at a certain time of day or after a certain length
of time. When
On Timer
is set to
On
, the green On Timer
indicator on the front of the television is lit.
a
In the
APPLICATIONS
menu, press
b
to select
On
Timer
and press
OK
.
b
Press
B
or
b
to select
Enable On Timer
, and then
press
C
or
c
to select
On
.
c
Press
b
to select
Enable DTV Clock
, and then press
C
or
c
to select
On
or
Off
.
d
Press
B
or
b
to go through the list adding the details
of the On Timer by using the number buttons and
C
and
c
to make selections.
Power On Time
(only for DTV Clock On mode)
:
Set
the time you prefer with the number buttons.
Repeat
(only for DTV Clock On mode): Select the
desired On Timer operation (
Once
,
Every Day
,
Mon-
Fri
,
Mon-Sat
,
Sat-Sun
).
NOTE:
When an external input is selected in the
Input
field, a channel cannot be selected.
Volume:
Set the volume that will be applied when the
television turns on.
Time until Power On
(only for DTV Clock Off mode):
Set the amount of time from now until the TV turns on
using the number buttons (maximum of 12 hours).
To cancel the On Timer
a
In the
On Timer
menu, select
Enable On Timer
b
Press
C
or
c
to select
Off
.
Programme Timers –
digital
only
APPLICATIONS
Programme Timers
YouTube
On Timer
Media Player
Sleep Timer 00:00
Edit Timer
10:50 Tue, 26 Apr
Timer Type
Date
Channel
Start Time
End Time
30 CABC Channel
Reminder
10:49
11:49
Subtitle
Repeat
Once
Off
Tue, 26 Apr 2010
Input Back
Edit
Set Timer Delete Timer
50
0
-
9
RETURN
On Timer
On Timer
Enable On Timer
Power On Time
Enable DTV Clock
Repeat
Volume
Time until Power On
20
00:00
Once
00:00
On
On
58
CONTROLS AND FEATURES
English
The television can be set to turn itself
Off
after a certain length
of time.
a
In the
APPLICATIONS
menu, press
b
to select
Sleep
Timer
. Use the number buttons to set the desired time.
For example, to switch the television off in one and a
half hours enter 01:30, or press
c
/
C
to increase/
decrease in steps of 10 minutes. (Maximum time
setting is 12 hours)
b
Press
EXIT
to finish.
c
To cancel the
Sleep Timer
, enter all zeros for the
above setting.
Energy Saving Settings
The TV will automatically turn itself off (standby) after 4 hours,
if you do not operate the TV either from the remote control or
the TV control panel.
a
In the
PREFERENCES
menu, highlight
Energy Saving
Settings
and press
OK
.
b
Press
B
or
b
to select
Automatic Power Down
.
c
Press
C
or
c
to select
On
or
Off
, and press
OK
.
NOTE:
• This feature is set to
On
when
Location
is set to
Home
.
• 1 minute before switching to standby, a Warning message
will appear.
• When the following features are set, the feature that is set
for the nearest time will function.
- Automatic Power Down
- Sleep Timer
- Photo Frame/Auto Power Off
- Auto shutdown after 1 hour of inactivity (after power on by
On Timer)
- No signal auto power off (after 15 minute of no signal)
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
• Low signal strength of analog channel (no signal detection)
• Only Audio L/R is connected to external input to listen to
music through the TV speakers.
a
In the
Energy Saving Settings
menu, highlight
No
Signal Power Down
, and press
OK
.
b
Press
B
or
b
to highlight the item you want to change,
and press
C
or
c
to select
On
or
Off
.
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before turning off.
Sleep Timer
Automatic Power Down
No Signal Power Down
59
CONTROLS AND FEATURES
English
Digital on-screen information
and Programme Guide
When viewing in
digital
mode, the on-screen
information and programme guide provide access
to programme details for all available channels.
a
Press , the information screen will appear giving
details of the channel and programme currently being
viewed.
b
Press
B
or
b
to select the “
Now
”, “
Next
” or “
Also
information guide.
c
To record the next scheduled programme, select
Next
” and press
OK
. The
Edit Timer
screen will
appear.
d
The details of the programme will already have been
added to the timer. Highlight
Set Timer
and press
OK
to save.
To indicate that a Recording Timer has been set, a
clock icon will be displayed in the
Next
and
Also
fields
of the information screen. A check mark will appear if
the timer is a Reminder Timer.
e
Press
b
to select
Also
. Details of programmes that
have started on other channels will be provided. Use
C
or
c
to change the display contents.
To display More Information
a
Press
QUICK
to open the
Quick Menu
.
b
Press
b
to highlight
More Information
and press
OK
.
On-screen Information icons
Information
D
+
Change Watch TV
Exit
6:00 Thu, 11 Oct
8888
ITV1 London ASTRA 19.2˚E
Now
MLB Young’s two-run triple leads AL over NL
MLB Young’s two-run triple leads AL over NL
15 min left
News
8:00 - 9:00
6:00 - 8:00
Next
Also
HD
AD 18
16:9
AD English
World News and Sports
Back
Edit
Set Timer Delete Timer
RETURN
Edit Timer 10:50 Tue, 26 Apr
Tue, 26 Apr 11:00
30 CABC Channel
Seven Wonder4
End Time
Start Time
10:49
11:49
Repeat
Subtitle
Once
Off
Timer Type
Reminder
50
Icon Description
Service info Service type
(TV, Radio, TEXT)
Skip
Audio info Mono
Stereo
Dual mono
Multichannel
Dolby Digital
Dolby Digital+
HE-AAC Audio Coding
AD Audio Description
Audio/Subtitle info For Hard of Hearing
Event info HD, SD Video format (HD, SD)
16:9, 4:3 Video Aspect
Teletext
Subtitle (Single, Multi)
Multi-audio track
0, 4 – 18 Parental rating
Encrypted
Timer info Recording
Reminder
D
D
+
60
CONTROLS AND FEATURES
English
a
Select the on-screen guide by pressing
GUIDE
, and
the guide screen will appear highlighting details of the
channel and programme currently being viewed. This
may take a few moments to appear.
You can switch the time scale to 1.25 or 2.5 hours by
pressing the
GREEN
button.
NOTE:
Channels are displayed in groups by service
type (TV, Radio, TEXT). Pressing the
TV
button will
switch the service type.
b
Press
C
or
c
for information on other programmes
scheduled for the channel selected. To highlight the
first programme in the genre grid, press the
RED
button.
c
For details of other programmes currently available,
press
B
and
b
to scroll up and down the channel list.
As channels are selected, details of the programme
currently being broadcast will appear. Press
C
or
c
to
view information for future programmes.
d
For information on a highlighted programme, press
.
e
To set the timer for that programme, press the
BLUE
button to bring up the
Programme Timers
menu.
NOTE:
In order for the recording operation to work
properly, the media recorder must be set to the same
time as the TV. Regarding the process for recording,
please refer to the owner’s manual of the recording
equipment.
f
Press P
u
to advance to the next page, or press P
U
to
go back to the previous page.
From the guide screen, you can use the genre selection and
search features.
a
Press the
QUICK
button from the guide screen.
b
Press
B
or
b
to highlight
Genre Colour
in the
Quick
Menu
, and then press
OK
.
c
With the focus on a particular genre, press the desired
colour key to assign. Four colours will be available to
set. Press
RETURN
to go back to the guide screen.
d
Press the
YELLOW
button to access the
Genre Search
screen.
e
Press
C
or
c
to select the genre. Programmes listed
will change for the new genre. Press
B
or
b
to
highlight a particular programme.
f
When a current programme is selected, pressing
OK
will tune to that programme. When a future
programme is selected, pressing
OK
will open the
Edit
Timer
menu.
g
For information on a highlighted programme, press
.
h
To exit the
Genre Search
and go back to the guide
screen, press the
YELLOW
button.
Guide
6 M6
11 NT1
806 ITV1
807 ITV3
808 ITV2
809 ITV4
34 AB1
804 Codec 4:3
31 PARIS PREMIERE
800 FlowerGd 6Mbs
801 FlowerGd 4Mbs
802 FlowerGd 2Mbs
9 W9
10:50 Tue, 6 Apr
Thu
6
TV
18:00 18:30 19:00 19:30 20:00
Evamag
00
MA SORCIE...
06
Nicky La...
SUMMERLAND
08
Street fight...
32
Dragon B...
59
Dragon B...
24
K 2000
48
10
LES SIM...
44
SUMMERLAND
53
LES SIM...
09
TOP MODEL
06
LES SIM...
33
HAPPY DAYS
39
HAPPY DAYS
39
21 jump street
27
Jerry Springer Show
14
City guys
54
L...
17
LES SIMPSON
09
Genre selection/searching
RETURN
Genre Colour Setup
Movies
Colour Setup
Back
34 AB1
11 NT1
9 W9
34 AB1
11 NT1
31 PARIS PREMIERE
9 W9
11 NT1
31 PARIS PREMIERE
11 NT1
11 NT1
34 AB
31 PARIS PREMIERE
Indiana Jones and the Temple of Doom
Red Corner
The Lawnmower Man
A Vow to Kill
Parenthood
Body and Soul
The Nun’s Story
Red Corner
The Real Blonde
Critters
The jackal
Coup De Ville
Hard Rain
Wed,27 Apr 22:15- 23:55
Wed,27 Apr 0:15- 1:45
Thu,28 Apr 1:20- 3:00
Fri,29 Apr 1:30- 3:00
Sat,30 Apr 0:45- 2:40
Sat,30 Apr 1:15- 3:00
Sat,30 Apr 15:00- 17:30
Sat,30 Apr 23:20- 1:15
Sun,1 May 0:40- 2:00
Sun,1 May 0:40- 2:20
Sun,1 May 21:10- 23:20
Sun,1 May 23:20- 1:15
Mon,1 May 1:10- 3:00
Genre Search
10:50 Tue, 6 Apr
Movies
61
CONTROLS AND FEATURES
English
Digital settings – parental
control
In order to prevent viewing of unsuitable films and
programmes, channels and menus can be locked in
digital mode. They can then only be accessed with
a security code PIN.
a
Press
MENU
and
c
to select the
SETUP
menu.
b
Use
b
to select
DTV Settings
, and then press
OK
.
c
Press
b
to highlight
PIN Setting
, and then press
OK
.
d
Using the number buttons enter a four digit number.
Once entered you will be prompted to confirm by
entering again.
The PIN number is now set.
If the PIN code has been set, when
Auto Tuning
and
Reset TV
are executed, entering the PIN will be
necessary.
The Parental Control feature allows you to block programmes
according to their rating levels. If a PIN has been set, you will
need to enter it before adjusting the level.
a
In the
DTV Settings
menu, press
b
to select
Parental
Control
, and then press
OK
.
b
Use
C
or
c
to choose an option (
None
or an age
setting (4-17 or 4-18 depending on the
Country
setting)).
To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.
You can
use
the Network Lock feature to prevent the Web
browser from launching. When this feature is set to
On
, PIN
input will be necessary to use YouTube.
This feature will be grayed out until a PIN is set.
a
In the
PREFERENCES
menu, highlight
Network Lock
and press
OK
.
b
Enter your four-digit PIN code.
c
Press
C
or
c
to select
On
, and then press
OK
.
To unlock the Network:
a
Select
Off
in step 3 above.
Setting the PIN
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Germany
Satellite Settings
DTV Settings
Channels
PIN Setting
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
* * * *
New PIN:
Confirm PIN:
PIN Setting
Parental Setup
Network Lock
Parental Setup None
Parental Control
Network Setup
Media Renderer Setup
Panel Lock
Display Settings
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Network Lock
Off
PREFERENCES
62
CONTROLS AND FEATURES
English
Digital settings – Channel
Options
Favourite Channels
creates a list of the
digital
channels that
are watched most. Four lists can be created, they can be a
mixture of television, radio and text channels.
a
Select a channel you want to add to your favourite list.
b
Press
QUICK
to open the
Quick Menu
.
c
Press
b
to select
Channel Options
and press
OK
.
d
Press
c
repeatedly to select the favourite list (Fav.1-4)
e
Press
OK
to select the ones required. A tick will appear
in the box as they are selected.
f
Repeat steps 1 through 5 for other channels.
g
When all favourites have been selected, press
EXIT
.
a
Press
LIST
to display
Channel List
.
b
Press
C
or
c
to select Favourites 1-4. The number of
favourites available depends on how many lists have
been created.
c
Press
B
or
b
to highlight a channel and press
OK
to
watch.
This feature allows you to set channels that will be skipped when
P
u
or
P
U
are used to tune.
a
Select the channel you want to skip in your channel
list.
b
From the
Quick Menu
, press
b
to select
Channel
Options
and press
OK
.
c
Press
c
repeatedly to highlight the skip (
8
) box.
d
Press
OK
to select. A tick will appear in the box.
e
Repeat steps 1 through 4 for other channels.
f
Press
EXIT
.
NOTE:
Skipped channels cannot be selected by
P
u
or
P
U
but still be accessed by direct number entry (when
tuned a
8
icon will be displayed in the banner to
indicate as a skipped channel).
Locking Channels
stops the viewing of
digital
channels, and
they can only be accessed by entering the PIN.
a
Select the channel you want to lock in your channel
list.
b
From the
Quick Menu
, press
b
to select
Channel
Options
and press
OK
.
c
Press
c
repeatedly to highlight the lock ( ) box.
d
Press
OK
to select. A tick will appear in the box.
If a PIN has already been set, PIN entry will be
required to set the locked channels.
e
Repeat steps 1 through 4 for other channels.
f
Press
EXIT
.
g
From this point on, when any of the channels in the
Locked Channel
list are selected, the PIN must be
entered before they can be accessed.
Selecting favourite channels
Favourite Channel Lists
Fav.
Channel Options
1234
Channel List
Favourites 1
6 M6
9 W9
11 NT1
31 PARIS PREMIERE
34 AB1
51 ITV1
Skip channels
Locking channels
63
CONTROLS AND FEATURES
English
Digital settings – other
settings
In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.
a
In the
DTV Settings
menu, press
b
to select
Subtitle
and Audio
and press
OK
.
b
Press
b
to select
Subtitle Display
and use
C
or
c
to
select
On
or
Off
.
c
Press
b
to select
Primary Subtitle Language
or
Secondary Subtitle Language
and use
C
or
c
to
select an option.
The
SUBTITLE
button can be used to select subtitle on or off
for the current channel only and to select the subtitle language
if more than one subtitle is available.
This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided multiple language
tracks are being broadcast.
a
In the
Subtitle and Audio
menu, press
b
to select
Audio Type
and use
C
or
c
to select
Normal
or
For
Hard of Hearing
.
b
Press
b
to select
Primary Audio Language
or
Secondary Audio Language
and use
C
or
c
to
select an option.
If more than one soundtrack is available, use the
s
button to select between them.
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional Access
Module) and card. These are purchased from a service provider
and allow additional subscription broadcasts to be viewed. For
information, see a service provider.
a
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM
has been inserted.
b
In the
DTV Settings
menu, press
B
or
b
to select
Common Interface
and press
OK
.
c
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may occur automatically
if instigated by the broadcaster. This could cause the
cancellation of any Reminders/Recordings during this
process.
• Some CI or CI+ CAM may not be supported.
CI+ operation is not guaranteed except for Canal Ready DTT
services on suffix FC models.
Subtitles
Audio languages
Subtitle and Audio
Subtitle Type
Secondary Subtitle Language
Primary Subtitle Language
Audio Type
Primary Audio Language
Secondary Audio Language
English
English
English
Normal
English
Normal
Subtitle Display
Off
Common Interface
64
CONTROLS AND FEATURES
English
Software Upgrade and
Licences
When
Auto Upgrade
is set to
On
, the television will
automatically upgrade while in standby if new software is
available.
a
From the
SETUP
menu, press
B
or
b
to select
Software Upgrade
and press
OK
.
b
Press
B
or
b
to select
Over-the-air Upgrade
and
press
OK
.
c
Press
B
or
b
to select
Auto Upgrade
.
d
Use
C
or
c
to select
On
or
Off
.
If preferred, software upgrades can be searched for manually
using
Search for New Software
.
a
In the
Software Upgrade
menu, select
Over-the-air
Upgrade
, and then press
B
or
b
to select
Search for
New Software
.
b
Press
OK
. The television will automatically start
searching for a software upgrade, the progress bar will
move along the line.
If an upgrade is found, the television will automatically
start downloading. If not, a screen will appear stating
that an upgrade is unavailable.
TOSHIBA may offer upgrades for the TV’s software in the future.
The TV’s software is upgraded via the Network.
Before downloading software;
Configure your TV to connect to the Internet.
NOTE:
While the upgrade is being performed, you will not be
able to watch the TV.
a
In the
Software Upgrade
menu, press
B
or
b
to
select
Network Upgrade
and press
OK
.
NOTE:
If the network is not available, a warning
message will appear.
b
The TV software upgrade will start when download
succeeds.
The licences for the software used in this television are available
for viewing.
a
In the
SETUP
menu, press
B
or
b
to select
Software
Licences
and press
OK
.
A screen will appear displaying all the licensing
information required for the televisions software.
Auto Upgrade
Searching for New Software
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
Network Upgrade
Software Licences
65
CONTROLS AND FEATURES
English
System Information and
Reset TV
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
In the
SETUP
menu, press
B
or
b
until
System
Information
is highlighted.
b
Press
OK
to display the
System Information
.
c
For information about the signal quality of a particular
multiplex, press
B
or
b
to select that multiplex.
d
Press
OK
for a screen showing detailed technical
information about the selected multiplex.
Selecting
Reset TV
will reset all TV settings, including saved
channels, to their original factory values.
a
In the
SETUP
menu, press
b
until
Reset TV
is
highlighted.
b
Press
OK
to select. A screen will appear warning that
all settings will be lost. Press
OK
to continue.
When the set powers back on, the
Quick Setup
screen
will appear. Press
OK
to advance the setup and
perform an auto tune. (See ‘Quick Setup’ section on
page 15.)
PC Settings
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the television
screen. The picture position may now be adjusted to suit
personal preference.
a
In the
PREFERENCES
menu, press
B
or
b
to highlight
Display Settings
and press
OK
.
b
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
c
Press
OK
. Press
B
and
b
to select an option, then
C
or
c
to adjust the settings.
The
Clock Phase
matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
OK
to select, and then
b
to highlight
Clock
Phase
.
c
Use
C
or
c
to adjust until the picture clears.
System Information
Reset TV
System Information
2010
2.1.26.0 Feb 19 2010 - 15:56:50 FW:13
WEAK
Ch25
Good
AVERAGE STRONG
TOSHIBA
Horizontal and Vertical Position
Clock Phase
Auto Format On
4:3 Stretch Off
PC Settings
Display Settings
0
0
0
0
PC Settings
Horizontal Position
Reset
Sampling Clock
Vertical Position
Clock Phase
66
CONTROLS AND FEATURES
English
Adjusting the
Sampling Clock
alters the number of pulses per
scan, this will clear vertical lines on the screen.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
OK
to select, and then
b
to highlight
Sampling
Clock
.
c
Use
C
or
c
to adjust until the picture clears.
Use Reset to return all items to the original factory settings.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
OK
to select, and then
b
to highlight
Reset
.
c
Press
OK
.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Input selection and AV
connections
See page 8 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct
Input
socket.
Alternatively, press the external source selection button
o
until the picture from connected equipment is shown.
Use the Input Selection window if the television does not switch
over automatically.
a
By pressing
o
on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
HDMI
®
displays equipment connected to
Input HDMI
on the back or side of the television.
PC displays a computer connected to
Input RGB
/
PC
on
the back of the television.
Sampling Clock
Reset
Input selection
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
Inputs
DTV Sat TV *
DTV Sat RADIO *
DTV Sat TEXT *
DTV Ant (or Cable) TV *
DTV Ant (or Cable) RADIO *
DTV Ant (or Cable) TEXT *
1
2
3
HDMI 3
HDMI 2
ATV
HDMI 4
PC
HDMI 1
Pressing
o
on the
remote control
Pressing
o
on the TV
*
Depends on the type of
channels that are currently
available for DTV.
67
CONTROLS AND FEATURES
English
This feature is designed to make input selection more
convenient by allowing you to skip unused inputs.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
.
b
Press
OK
to display the
AV Connection
menu.
c
Press
B
or
b
to highlight
Input Labeling
and press
OK
.
d
Press
B
or
b
to select the input you want to skip, and
then press the
RED
button to turn on the skip.
e
To turn off the skip, press the
RED
button again.
The input set to Skip is greyed out in the Input
Selection window and is skipped over when you press
o
on the remote control.
These input labels are shown in the input selector. You can label
video inputs according to the devices you have connected to the
TV.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
Input Labeling
and press
OK
.
c
Press
B
or
b
to highlight the item you want to label,
and then press
C
or
c
to select --,
Amplifier
,
Cable
,
DVD
,
Game
,
PC
,
Recorder
,
Satellite
or
VCR
, or
press the
GREEN
button to select
User Input
.
NOTE:
When
User Input
is selected by pressing the
GREEN
button, the
Software Keyboard
window will
appear. Input the desired characters (10 characters or
less) by using the
Software Keyboard
(see page 42)
or using the number buttons for a number input. To
save your settings, press the
BLUE
button.
d
Repeat step 3 for other video inputs.
If you view DVDs with this TV, the Colour Decoding option may
be set to ensure the colourimetry reproduction.
NOTE:
The modes excluding
Auto
(
BT601
and
BT709
) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If
BT601
or
BT709
is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto
.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
Colour Decoding
, and then
press
C
or
c
to select
Auto
,
BT601
or
BT709
.
External input skip
Network Setup
Media Renderer Setup
Display Settings
Network Lock
AV Connection
Photo Frame Setup
Teletext Auto
Panel Lock Off
PREFERENCES
AV Connection
Input Labeling
PC/HDMI 2 Audio
PC
HDMI 2 Audio
Digital
HDMI Settings
Colour Decoding
Auto
Side Shared Audio
EXT 2
Digital Audio Output
Auto
Input Label
--
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
Labeling video input sources
Colour Decoding
Input Label
--
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
68
CONTROLS AND FEATURES
English
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the
‘Connecting a computer’ section), and then use the
PC/HDMI 2
Audio
setting.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
PC/HDMI 2 Audio
, and
then press
C
or
c
to select the
PC
option.
NOTE:
Selecting the
PC
option will force HDMI 2
Audio to Digital mode.
If the connected HDMI source does not support digital audio,
plug the audio cable into
PC/HDMI 2 (AUDIO)
on the back of
the television (as shown in the ‘Connecting an HDMI
®
or DVI
device to the HDMI input’ section), then use the
HDMI 2 Audio
setting.
a
In the
PREFERENCE
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
HDMI 2 Audio
, and then
press
C
or
c
to select
Auto
or
Analogue
.
If the sound is absent, try selecting a different setting.
NOTE:
HDMI 2 supports digital and analogue sound,
HDMI 1, HDMI 3 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
The AUDIO terminals for the COMPONENT VIDEO INPUT
(EXT 2) and VIDEO INPUT (EXT 3) are shared.
Select an appropriate option (EXT 2 or EXT 3) for the input that
you are using.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
Side Shared Audio
, and
then press
C
or
c
to select
EXT 2
or
EXT 3
.
Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the
Enable Content Type
and
INSTAPORT™
options to
Off
. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
HDMI Settings
and press
OK
.
NOTE: HDMI Settings
is grayed out on non-HDMI
inputs.
c
Press
B
or
b
to select an item, and then press
C
or
c
to select a setting.
• Enable Content Type: On
This feature is part of the HDMI1.4 standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent from
the connected HDMI device.
• INSTAPORT™: On
This feature reduces the lag time when switching
HDMI sources.
•RGB Range: Auto
This feature adjusts RGB full range signal
automatically. When
Limited
is selected, RGB signal
is output in the range from 16 to 235. When
Full
is
selected, RGB signal is output in the range from 0 to
255.
NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
PC Audio
HDMI 2 Audio
Side Shared Audio
AV Connection
Input Labeling
PC/HDMI 2 Audio
HDMI 2
HDMI 2 Audio
Auto
HDMI Settings
Colour Decoding
Auto
Side Shared Audio
EXT 2
Digital Audio Output
Auto
HDMI Settings
HDMI Settings
Enable Content Type
INSTAPORT
TM
On
On
RGB Range
Auto
69
CONTROLS AND FEATURES
English
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM:
this mode outputs PCM format to the digital audio output
socket.
Auto:
this mode outputs Dolby Digital (if available) or PCM to
the digital audio output socket.
Dolby Digital
S
Dolby Digital
Dolby Digital Plus
S
Dolby Digital
MPEG
S
PCM
HE-AAC
S
Dolby Digital
a
In the
PREFERENCES
menu, press
b
to highlight
AV
Connection
and press
OK
.
b
Press
B
or
b
to highlight
Digital Audio Output
.
c
Press
C
or
c
to select
PCM
or
Auto
.
Digital Audio Output
AV Connection
Input Labeling
PC/HDMI 2 Audio
HDMI 2
HDMI 2 Audio
Auto
HDMI Settings
Colour Decoding
Auto
Side Shared Audio
EXT 2
Digital Audio Output
Auto
70
CONTROLS AND FEATURES
English
Using REGZA-LINK
This is a new feature that uses CEC technology and
allows you to control Toshiba REGZA-LINK
compatible devices from the television remote
control via HDMI connection (page 11).
When the
Enable REGZA-LINK
item in the
REGZA-LINK
Setup
menu is set to
On
, individual functions also set to
On
will be activated.
a
Press
MENU
and
C
or
c
to select the
PREFERENCES
menu.
b
Press
b
to select
REGZA-LINK Setup
and press
OK
.
c
Press
b
to highlight
Enable REGZA-LINK
, and then
press
C
or
c
to select
On
.
NOTE:
If you set
Enable REGZA-LINK
to
Off
, all
other items will be grayed out.
The
TV Auto Power
setting allows the television to be
automatically switched on if a REGZA-LINK device is turned on.
a
In the
REGZA-LINK Setup
menu, press
b
to highlight
TV Auto Power
.
b
Press
C
or
c
to select
On
or
Off
.
When
Auto Standby
is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
REGZA-LINK equipment.
a
In the
REGZA-LINK Setup
menu, press
b
to highlight
Auto Standby
.
b
Press
C
or
c
to select
On
or
Off
.
When
Amplifier Control
is set to
On
, it allows the “
Speaker
Preference
” feature to become available.
a
In the
REGZA-LINK Setup
menu, press
b
to highlight
Amplifier Control
.
b
Press
C
or
c
to select
On
or
Off
.
This feature allows the audio output preference to be set to the
TV speakers or AV amplifier speakers. The AV Amplifier option
lets the television’s remote control adjust or mute the volume of
the audio.
a
In the
REGZA-LINK Setup
menu, press
b
to highlight
Speaker Preference
.
b
Press
C
or
c
to select
TV Speakers
or
Amplifier
.
If a REGZA-LINK device with HDMI switching capability (e.g. AV
amplifier) is connected to the HDMI input, you can select
another REGZA-LINK device that is connected to the master
HDMI device on the input source list.
a
Press
o
and a list will appear on screen showing
available input sources.
b
Press
b
to select the desired input source with REGZA-
LINK icon.
c
Press
c
and a second selection screen will appear
showing all connected REGZA-LINK equipment.
d
Press
B
or
b
to select the desired input source, and
then press
OK
.
Enable REGZA-LINK
TV Auto Power
Auto Standby
REGZA-LINK Setup
Enable REGZA-LINK
On
TV Auto Power
Auto Standby
Amplifier Control
Speaker Preference
On
On
On
TV Speakers
Amplifier Control
Speaker Preference
REGZA-LINK input source selection
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
1 DVD
2 VCR/DVR
3 CBL/SAT
4 GAME/TV
5 AUX
REGZA-LINK
71
CONTROLS AND FEATURES
English
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an
HDMI cable is removed, it will take a few minutes for the icon
to disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK
in the REGZA-LINK Setup menu may
need to be reset to
On
.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the
Enable REGZA-
LINK
item on the REGZA-LINK Setup menu from
Off
to
On
.
With the REGZA-LINK mode on your television’s remote
control, you can control the connected REGZA-LINK playback
device you are watching.
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection.
See page 7 for details on available remote control key
functions.
NOTE:
The available functions depend on the equipment
connected. All of the remote control keys may not be available.
Please refer to the operation manual for each piece of
equipment connected.
When connected equipment is switched on, REGZA-LINK will
automatically detect the television through the input selection.
If the television is in standby, it will be switched on
automatically.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 70).
NOTE:
Even if the equipment is showing a menu, the television may
automatically show the input source.
• This feature depends on the connected equipment and
television state.
If the television is turned off (standby mode), the television will
send a message to turn off (standby mode) all of the REGZA-
LINK devices connected to the television.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 70).
NOTE:
This feature depends on the connected equipment and
television state.
With your television’s remote control, you can adjust or mute the
sound volume of the speakers connected to the television via an
AV amplifier. First, set the remote control mode switch to
REGZA-LINK.
a
Set the
Speaker Preference
to
Amplifier
in the
REGZA-LINK Setup
menu.
b
Confirm that a connected REGZA-LINK device (such as
a DVD player, etc) is selected for the AV amplifier input
source.
NOTE:
• These functions depend on the device connected.
When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier’s speakers even if
TV Speakers
has been
selected. Turn the television off and on again to output the
sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.
This feature automatically adjusts the suitable widescreen
formats and picture preferences when connected to a Toshiba
PC compatible with REGZA-LINK.
NOTE:
This feature depends on the connected equipment
state.
REGZA-LINK playback device control
Available remote control keys (behind the panel)
REGZA-LINK one touch play
REGZA-LINK system standby
REGZA-LINK system audio control
Toshiba PC compatible with REGZA-LINK
72
English
TEXT SERVICES
Text services
This television has a multi-page text memory, which
takes a few moments to load. It offers two
Modes
of viewing text –
Auto
will display
Fastext
, if
available.
LIST
will save your four favourite pages.
The text character set will be automatically chosen by the
language setting in the
SETUP
menu.
a
In the
PREFERENCES
menu, select
Teletext
.
b
With
C
or
c
choose
Auto
or
LIST
then press
EXIT
.
The TEXT
button:
To view text services press
TEXT
. Press again to superimpose
the text over a normal broadcast picture and again to return to
normal viewing. Channels cannot be changed until text is
cancelled.
The first text page shown will be the
initial
page.
Any text page can be accessed by entering the 3 digit page
number using the numbered buttons, pressing the coloured
buttons or pressing
P
U
to advance to the next page and
P
u
to
go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as sub-pages
are received.
If you open a page containing sub-pages, the sub-pages are
automatically displayed in sequence. To quit automatic sub-
page change, press
C
or
c
.
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional sub-
pages, the colour of the numbers will change, indicating that
these pages have been loaded.
These sub-pages will remain available to view until another
page is chosen or, in normal TV mode, the channel is changed.
If
Fastext
is available, four coloured titles will appear at the
base of the screen.
To access one of the four given subjects, press the relevant
coloured button on the remote control.
For further information on your particular text system(s), see
the broadcast text index page or, consult your local Toshiba
dealer.
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.
To change these saved pages, press the relevant coloured
button and enter the 3 digit number. This number will change
in the top left of the screen and in the coloured highlight.
Press
OK
to save.
Whenever OK is pressed, all four page
numbers showing at the bottom will be saved and the
previous ones will be lost.
If
OK
is not pressed, the selection will be forgotten when the
channel is changed.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press
OK
or these pages will be saved.
Selecting modes
Text information
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Navigating pages using Auto
Navigating pages using LIST
73
TEXT SERVICES
English
Below is a guide to the functions of the remote control text
buttons.
k
To display the index/initial page:
Press
k
to access the index/initial page. The one displayed is
dependant on the broadcaster.
TEXT To display a page of text:
Press
TEXT
to display text. Press again to superimpose text over
a normal picture. Press again to return to normal television
viewing. Channels cannot be changed until this has been
done.
A
To reveal concealed text:
To discover the solutions on quiz and joke pages press the
A
button.
B
To hold a wanted page:
At times it is convenient to hold a page of text. Press
B
and
B
will appear in the top left of the screen. The page will be
held on screen until the button is pressed again.
C
To enlarge the text display size:
Press
C
once to enlarge the top half of the page, press again
to enlarge the bottom half of the page. Press again to revert to
normal size.
D
To select a page whilst viewing normal
picture:
Enter the page number then press
D
, normal picture will
be displayed. The television will indicate when the page is
ready by changing the colour of the page number at the top of
the screen. Press
TEXT
to view the page.
To display news flashes:
Select the news flash page for the chosen text service (see the
index page of text service). The news flashes will be displayed
as and when they are broadcast.
Control buttons
Remember to cancel text before
changing channels - press the TEXT
button twice.
74
English
PROBLEM SOLVING
Questions and Answers
Below are the answers to some of the most
common queries.
To check that you have the best colour:
a
With the external source playing, select
Colour
System
from the
SETUP
menu.
b
With
C
or
c
choose between
Auto
,
PAL
,
SECAM
,
NTSC 4.43
or
NTSC 3.58
.
a
Select the
ATV Manual Tuning
menu. Highlight the
station and press
OK
. Then press
c
to select
Manual
Fine Tuning
.
b
Using
B
or
b
adjust to get the best picture and sound.
Press
OK
and then
EXIT
.
Q
Why is there no sound or picture?
A
Check the television is not in standby mode. Check the
mains plug and all mains connections.
Q
There is a picture, but why is there little or no
colour?
A
When using an
external
source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to
Auto
to automatically display
the best colour system.
Q
Why doesn’t the video/DVD being played show on
screen?
A
Make sure the media recorder or DVD player is
connected to the television as shown on page 8, and
then select the correct input by pressing
o
.
Q
Why is there a picture but no sound?
A
Check all lead connections.
No sound or unacceptable format sound may be
received.
Check the volume has not been turned down or that
sound mute has not been selected.
Check shared audio settings.
Country Germany
Colour System Auto
Menu Language English
SETUP
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different television
station.
Manual Fine Tuning
may help.
Q
Why don’t the controls of the television work?
A
Check that
Panel Lock
is not
On
.
Q
Why doesn’t the remote control work?
A
Check that the mode switch on the remote control is
in TV mode.
Check that the batteries aren’t dead or inserted
incorrectly.
Q
Why is the
digital
channel locked?
A
The channel has been locked in
Channel Options
(
see
‘Digital Settings’
section
).
Q
Why are some of the
digital
subscription channels
unavailable?
A
Your subscription needs upgrading. Contact your
service provider.
Q
Why is the soundtrack in English when a different
audio language has been selected?
A
The programme is currently being broadcast with an
English soundtrack only.
Q
Why is there incorrect or no sound when in
DTV
mode?
A
Press
s
to ensure the hard of hearing option has
not been selected.
ATV Manual Tuning
Manual Fine Tuning
1 A C 9
0 I
75
PROBLEM SOLVING
English
a
Set the Colour to
Auto
and exit.
b
Go to the
PICTURE
menu and adjust the tint.
Q
What is DVB-T?
A
Digital Video Broadcast via an aerial/antenna.
Q
What is DVB-C?
A
Digital Video Broadcast via a cable connection.
Q
What is DVB-S/S2?
A
Digital Video Broadcasting Satellite/ETSI EN300 421
and Digital Video Broadcasting Satellite/ETSI EN302
307 via a satellite dish.
Q
How are radio channels selected?
A
Press
TV
on the remote control and select
DTV
RADIO
. Alternatively select from the GUIDE.
Q
What can be done if the PIN number has been
forgotten?
A
Use the Master PIN code of 1276, then change to a
number of your choice. Select
PIN Setting
from the
DTV Setting
menu to enter PIN. Ensure that no-one
else can use the Master PIN by removing the Owner’s
Manual.
Q
Why are there vertical stripes on the screen when in
PC mode?
A
The
Sampling Clock
may need adjustment. Select
PC
Settings
from the
Display Setting
menu, highlight
Sampling Clock
and adjust until the lines clear.
Q
Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?
A
The
Clock Phase
may need adjustment. Select
PC
Settings
from the
Display Settings
menu, highlight
Clock Phase
and adjust until the picture clears.
Q
Why when
digital
subtitles have been selected are
they not showing on screen?
A
Subtitles are not currently being transmitted by the
broadcaster.
Q
Why is a page number visible at the top of the screen
but no text?
A
Text has been selected but Teletext information is
currently unavailable on the current source.
Q
Why are there problems with analogue text?
A
Good performance of text depends on a good strong
broadcast signal. This normally requires a roof or loft
aerial. If the text is unreadable or garbled, check the
aerial. Go to the
main index
page of the text service
and look for the
User Guide
. This will explain the basic
operation of text in some detail. If further information
is needed on how to use text
see the text section
.
Q
Why are the colours wrong when an NTSC source is
played?
A
Connect the source via a SCART lead and play.
Select
Colour System
from the
SETUP
menu.
Q
Why don't the devices connected via HDMI operate
properly?
A
Make sure to use cables with the HDMI logo
(see page 10).
Some early HDMI equipment may not work properly
with the latest HDMI TV products, due to new standard
adoption. Try switching the HDMI settings (
Enable
Content Type
and
INSTAPORT™
) to
Off
.
Q
Why don't the REGZA-LINK devices work?
A
When the connected REGZA-LINK device does not
work correctly after you have changed the settings of
the device, turn off your television and unplug the
power cord, and then plug in and turn on again.
Unplug the HDMI cable of the REGZA-LINK device and
lead again.
Q
Why is the REGZA-LINK logo still showing when
the equipment has been disconnected?
A
If the REGZA-LINK device is disconnected, the logo will
disappear after approximately one minute.
Q
Why don't the networked devices work?
A
The LAN cables are not connected properly or at all.
Connect all cables (see page 13).
Make sure your network address is set up correctly
(see page 40).
76
PROBLEM SOLVING
English
Q
Why doesn't the wireless network work?
A
Make sure the TOSHIBA Dual Band WLAN Adaptor is
used (see page 13).
Check that the AP is powered on.
Q
Why doesn't the Media Player feature operate?
A
Make sure that devices are connected correctly.
Incorrect behavior may occur with a USB hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
Condition Solution
LED-3 LED-2 LED-1
Orange
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer is
set
Red
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer is
active
OFF Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer is
NOT set
Orange
(Solid)
OFF Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
set
Red
(Solid)
OFF Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
active
OFF OFF Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
NOT set
Orange
(Solid)
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Programme Timer is
set
LED indication
Condition Solution
LED-3 LED-2 LED-1
Red
(Solid)
Green
(Solid)
Red
(Solid)
Power ON (Standby)
On Timer is set
Programme Timer is
active
OFF Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Programme Timer is
NOT set
Orange
(Solid)
OFF Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Programme Timer is
set
Red
(Solid)
OFF Red
(Solid)
Power ON (Standby)
On Timer is NOT set
Programme Timer is
active
OFF OFF Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Programme Timer is
NOT set
OFF OFF Green
(Blinks)
Abnormal operation
of BUS line.
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn
ON the TV.
OFF OFF Red
(Blinks)
Abnormal operation
of WDT.
OFF Green
(Blinks)
OFF Fan stopped.
(if applicable)
LED-3
LED-1
LED-2
77
English
INFORMATION
License Information
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon
Image, Inc. in the United States and other countries
.
• YouTube and the YouTube Logo are trademarks of Google
Inc.
• This product contains NetFront Browser of ACCESS CO., LTD.
• This product contains Adobe
®
Flash
®
Player software under
license from Adobe Systems Incorporated.
Copyright © 1995-2009 Adobe Systems Incorporated. All
rights reserved. Adobe and Flash are trademarks of Adobe
Systems Incorporated.
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
• DVB is a registered trademark of the DVB Project.
•DLNA
®
, DLNA
®
Certification Logo and DLNA CERTIFIED™
are registered trademarks, service marks, or certification
marks of the Digital Living Network Alliance.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC
VIDEO) AND/OR (ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
Manufactured under license from Audyssey Laboratories. U.S.
and foreign patents pending. Audyssey EQ is a registered
trademark of Audyssey Laboratories.
Audyssey EQ is based on the award-winning Audyssey
MultEQ technology. It is the first-ever room equalization
solution that can achieve optimum sound for a large listening
area and it is featured in many high end home theater
products. Audyssey EQ is used in the TV tuning process to
calculate an equalization solution that corrects time and
frequency response problems in TV systems. This results in
clear, rich sound with more intelligible dialog.
This product achieved the European Eco label
award issued by the European Commission.
You can get more information in following link:
http://ec.europa.eu/environment/ecolabel/
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
ACCESS, the ACCESS logo and NetFront are
trademarks or registered trademarks of ACCESS
CO., LTD. in the United States, Japan and other
countries.
© 2010 ACCESS CO., LTD. All rights reserved.
This software is based in part on the work of the
Independent JPEG Group.
DivX
®
, DivX Certified
®
and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
Covered by one or more of the following U.S.
Patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
Audyssey EQ technology
78
INFORMATION
English
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you
do not
use any proprietary
polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury
(Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
79
INFORMATION
English
Information
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
* NC = not connected
Acceptable PC signals through the PC terminal
The PC input on this TV only accepts signal formats which are compliant with VESA-DMT as shown in the
table below. Since some PCs input signals which are different from the resolution and frequency described
in the table below, the following phenomenon may occur; incorrect display, false format detection, picture
position failure, blur, or judder. In this case, set the monitor output format on your PC to conform to a signal
in the table below.
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1R6Ground11NC
2G7Ground12NC
3B8Ground13H-sync
4NC*9 NC14V-sync
5 Ground 10 Ground 15 NC
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VESA Standard (DMT)
VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz
72.809Hz 37.861kHz 31.500MHz
75.000Hz 37.500kHz 31.500MHz
SVGA 800 × 600 56.250Hz 35.156kHz 36.000MHz
60.317Hz 37.879kHz 40.000MHz
72.188Hz 48.077kHz 50.000MHz
75.000Hz 46.875kHz 49.500MHz
XGA 1024 × 768 60.004Hz 48.363kHz 65.000MHz
70.069Hz 56.476kHz 75.000MHz
75.029Hz 60.023kHz 78.750MHz
WXGA 1280 × 768 59.995Hz 47.396kHz 68.250MHz
59.870Hz 47.776kHz 79.500MHz
74.893Hz 60.289kHz 102.250MHz
1360 × 768 60.015Hz 47.712kHz 85.500MHz
SXGA 1280 × 1024 60.020Hz 63.981kHz 108.000MHz
75.025Hz 79.976kHz 135.000MHz
80
INFORMATION
English
Acceptable video or PC signals through the HDMI terminals
The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are
compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals
which are different from the resolution and frequency described in the table below, the following
phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
In this case, set the monitor output format on your PC, HDMI or DVI device to conform to a signal in the
table below.
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VESA
Standard
480i 720 × 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz
576i 720 × 576i 50.000Hz 15.625kHz 27.000MHz
480p 720 × 480p 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz
576p 720 × 576p 50.000Hz 31.250kHz 27.000MHz
1080i 1920 × 1080i 59.940/60.000Hz 33.716/33.750kHz 74.176/74.250MHz
1080i 1920 × 1080i 50.000Hz 28.125kHz 74.250MHz
720p 1280 × 720p 59.940/60.000Hz 44.955/45.000kHz 74.176/74.250MHz
720p 1280 × 720p 50.000Hz 37.500kHz 74.250MHz
1080p 1920 × 1080p 59.940/60.000Hz 67.433/67.500kHz 148.352/148.500MHz
1080p 1920 × 1080p 50.000Hz 56.250kHz 148.500MHz
1080p 1920 × 1080p 24.000Hz 27.000kHz 74.250MHz
VGA 640 × 480 59.940/60.000Hz 31.469/31.500kHz 25.175/25.200MHz
72.809Hz 37.861kHz 31.500MHz
75.000Hz 37.500kHz 31.500MHz
SVGA 800 × 600 56.250Hz 35.156kHz 36.000MHz
60.317Hz 37.879kHz 40.000MHz
72.188Hz 48.077kHz 50.000MHz
75.000Hz 46.875kHz 49.500MHz
XGA 1024 × 768 60.004Hz 48.363kHz 65.000MHz
70.069Hz 56.476kHz 75.000MHz
75.029Hz 60.023kHz 78.750MHz
WXGA 1280 × 768 59.995Hz 47.396kHz 68.250MHz
59.870Hz 47.776kHz 79.500MHz
74.893Hz 60.289kHz 102.250MHz
1360 × 768 60.015Hz 47.712kHz 85.500MHz
SXGA 1280 × 1024 60.020Hz 63.981kHz 108.000MHz
75.025Hz 79.976kHz 135.000MHz
81
INFORMATION
English
USB Media Player Supported Format
Photo
Data compatibility: JPEG Exif ver 2.2
Maximum viewable resolution: 4096 x 4096 (HW decode) pixels
16384 x 16384 (SW decode) pixels
Maximum file size: 9MB
Maximum number of files: 2000/folder
Movie
* Profile: DivX HD 1080p Profile
External subtitle file (.srt) is supported
Maxmum resolution: 1920 x 1080
Maxmum file size: Unlimited
Maxmum number of files: 1000/folder
Music
Maxmum file size: Unlimited
Maxmum number of files: 1000/folder
NOTE:
Playback in all file formats listed above can not be guaranteed.
Extension Format
.jpg, .jpeg JPEG
Extension System Video Codecs Audio Codecs
.mts, .m2ts AVCHD (MPEG-2 TS) MPEG-4 AVC/H.264 Dolby Digital (AC-3)
PCM
.divx, .div, .avi DivX * DivX 3,4,5,6 PCM
ADPCM
MPEG-1/2 Layer2 (MP2)
MPEG-1/2 Layer3 (MP3)
Dolby Digital (AC-3)
.mp4, .m4v MP4 MPEG-4 AVC/H.264 MPEG2/4 LC AAC
.asf, .wmv ASF VC1 (WMV9) WMA Std
Extension System Audio Codecs
.mp3 MP3 MPEG-1/2 Layer3 (MP3)
.mp4, .m4a MP4 MPEG2/4 LC AAC
.wma WMA WMA Std
82
INFORMATION
English
Specifications and accessories
Receiving systems
DVB-C Broadcast systems
DVB-S/S2 Broadcast systems
Specification is subject to change without notice.
DVB-T Broadcast systems/channels
Broadcast systems/channels
UK UHF 21-68 PAL-I UHF UK21-UK69
France
VHF 05-10 (VHF 01-05)
UHF 21-69
PAL-B/G UHF E21-E69
VHF E2-E12, S1-S41
Germany VHF 05-12
UHF 21-69
SECAM-L UHF F21-F69
VHF F1-F10, B-Q
Austria VHF 05-12
UHF 21-69
SECAM-D/K UHF R21-R69
VHF R1-R12
Switzerland VHF 05-12
UHF 21-69
Italy VHF 05-12 (D,E,F,G,H,H1,H2)
UHF 21-69
Spain UHF 21-69
Nederlands VHF 05-12
UHF 21-69
Greece VHF 05-12
UHF 21-69
Video Input
PAL, SECAM, NTSC 3.58/4.43
External connections
EXT 1 Input 21-pin SCART RGB, A/V
EXT 2 Input 3.5mm mini jack Y, P
B
/C
B
, P
R
/C
R
Audio (shared with
EXT 3 audio)
EXT 3 Input 3.5mm mini jack Video/Audio L + R
AUDIO terminals
are shared with EXT
2 audio.
HDMI 1/2/3/4 Input HDMI
®
compliant
HDCP compliant
(Enable Content Type, INSTAPORT™,
RGB Range, supported)
PC Input Mini D-sub 15-pin Analog RGB signal
PC/HDMI 2 Audio 3.5mm mini jack Audio
Digital Audio Output (S/PDIF) Optical
LAN port RJ-45
USB 1 port Media Player
Interface version: USB 2.0
USB class: Mass Storage
File system: FAT12, FAT16, FAT32, and
NTFS
USB 2 port Wireless LAN adaptor ready for a home
network, IEEE802.11a/b/g/n compatible
Stereo
Nicam
2 carrier system
Visible Screen Size
(approx.)
Model 40
46
102cm
117cm
Display
16:9
Sound output
(at 10% distortion)
Main 10W + 10W
Woofer 10W
Power consumption
(approx.)
40VL748 144W
40XL748 144W
46VL748 152W
46XL748 152W
Annual power
consumption*
(approx.)
40VL748 157.0kWh
40XL748 157.0kWh
46VL748 180.3kWh
46XL748 180.3kWh
On mode power
consumption**
(approx.)
40VL748 106W
40XL748 106W
46VL748 122W
46XL748 122W
Standby power
consumption
(approx.)
0.3W
Off mode power
consumption
(approx.)
<0.01W
* Operating 4 hours a day and 365 days a year.
** Tested in accordance with IEC 62087-BD Ed. 2.0:2008.
Dimensions
(approx.)
40VL748
40XL748
46VL748
46XL748
66cm (H) 96cm (W) 29cm (D)
66cm (H) 96cm (W) 29cm (D)
73cm (H) 109cm (W) 29cm (D)
73cm (H) 109cm (W) 29cm (D)
(Height dimension includes foot stand)
Weight
(approx.) 40VL748
40XL748
46VL748
46XL748
21.5kg
21.5kg
25.5kg
25.5kg
Operating condition
Temperature 5°C - 35°C (41°F - 94°F)
Humidity 20 - 80% (non-condensing)
Supplied accessories
Remote control
2 batteries (AAA, IEC R03 1.5V)
SCART Adaptor cable
COMPONENT Adaptor cable
AV Adaptor cable
•‘P Clip
•Cleaning cloth
Tool set
Four Spacers
These spacers are to be used when mounting
the TV to a wall bracket. See page 5.
Two cable clamps
Optional accessories
TOSHIBA Dual Band WLAN Adaptor
WLM-10U2
83
INFORMATION
English
For your own records
INFORMATION
English
Better for the environment...
...better for you.
EU Ecolabel : PL/22/002
TOSHIBA gives a minimum of 2 years guarantee for this
LCD TV and 7 years availability for replacement of
electronic parts.
For warranty repairs, please contact the retailer where
you purchased the product.
●This TV has been verified to have high energy
efficiency.
●The design of this TV has been done to reduce its
impact through the use of materials and energy in its
life cycle. This will reduce the CO2 emissions from its
manufacture, use and end of life treatment.
●This TV has been designed to facilitate repair and
recycling.
© TOSHIBA Television Central Europe Sp. z o.o.
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
TOSHIBA Television Central Europe Sp. z o.o.
ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland
T 3
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 32VL748 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 32VL748 in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 32VL748

Toshiba 32VL748 User Manual - German - 84 pages

Toshiba 32VL748 User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info