475360
64
Zoom out
Zoom in
Previous page
1/84
Next page
TL96* Digital
Series
UL97* Digital
Series
2
English
Contents
INSTALLING YOUR TV
Safety Precautions .............................................................................4
Installation and important information .....................................5
The remote control ........................................................................... 8
Inserting batteries and effective range ............................ 8
CONNECTING YOUR TV
Connecting external equipment ..................................................9
Connecting an HDMI® device ......................................................10
To connect an HDMI device ...............................................10
HDMI’s ARC (Audio Return Channel) feature ...............10
REGZA-LINK connection ................................................................11
Connecting a computer ................................................................12
To connect a PC to the RGB/PC terminal .......................12
To connect a PC to the HDMI terminal ...........................12
Connecting a home network ......................................................13
To connect the TV to a home network - Wired ...........13
To connect the TV to a home network with
an internet connection - Wireless ................................13
Controls and input connections .................................................14
Switching on ............................................................................14
Using the menu system .......................................................14
Using the TV controls and connections .........................14
MENU structure ................................................................................15
SETTING UP YOUR TV
Startup Application .........................................................................16
Quick Setup ..............................................................................16
Ant/Cable/Satellite (if available) .......................................19
Satellite Settings .....................................................................20
Auto Tuning .............................................................................22
ATV Manual Tuning .........................................................................23
Tuning ........................................................................................23
Skip ..............................................................................................24
Sorting positions ....................................................................25
DTV Manual Tuning ........................................................................25
Manual Tuning ........................................................................25
Manual Tuning for DVB-C ...................................................26
Manual Tuning for DVB-S ....................................................26
DTV Settings ......................................................................................26
Channels (Antenna/Cable) .................................................26
Channels (Satellite) ................................................................27
Standby Channel Update ....................................................27
Location setting ......................................................................27
Analogue switch-off ............................................................27
CONTROLS AND FEATURES
General controls ...............................................................................28
Quick Menu ..............................................................................28
Selecting channels ................................................................28
The Time Display – analogue only .................................28
Stereo and Bilingual transmissions .................................28
Using 3D functions .........................................................................29
Using the 3D glasses ............................................................. 29
Viewing 3D images ...............................................................30
Switching display mode or selecting 3D format ........30
Setting the auto start mode ..............................................32
Adjusting 2D to 3D Depth ..................................................32
Setting the 3D PIN code ......................................................32
Setting 3D Start Message ....................................................32
Setting 3D Lock ......................................................................33
Setting 3D Timer Lock ..........................................................33
Setting Enable 3D Timer .....................................................33
Displaying 3D Important Info ............................................33
Switching left and right images .......................................33
Sound controls .................................................................................34
Volume controls and sound mute ...................................34
Dual .............................................................................................34
Balance ......................................................................................34
Bass, Treble .............................................................................. 34
Voice Enhancement ..............................................................34
Dynamic Bass Boost ..............................................................34
Stable Soun.........................................................................34
Dynamic Range Control ......................................................34
Audio Level Offset .................................................................35
TV Speakers On/Off ...............................................................35
Headphone Settings .............................................................35
Audio Description .................................................................35
Widescreen viewing .......................................................................36
Picture controls ................................................................................ 38
Picture Mode ...........................................................................38
Picture preferences ...............................................................38
Reset ...........................................................................................38
ColourMaster ...........................................................................38
Base Colour Adjustment .....................................................39
Colour Temperature .............................................................39
Auto Brightness Sensor .......................................................39
Active Backlight Control ......................................................39
Black/White Level ..................................................................39
MPEG NR – Noise Reduction ..............................................40
DNR – Digital Noise Reduction .........................................40
Active Vision ............................................................................40
Resetting the advanced picture settings ......................40
Automatic Format (Widescreen) ......................................40
4:3 Stretch ................................................................................40
Blue Screen ..............................................................................40
Picture Position ......................................................................41
Picture still ................................................................................41
Using your home network ...........................................................42
Setting up the Network .................................................................43
Wireless Setup ........................................................................43
Advanced Network Setup ..................................................45
DNS Setup ................................................................................46
Network Connection Test ...................................................46
Using the software keyboard ............................................47
Network Device Setup ...................................................................47
External Control Setup .........................................................47
Device Name Setup ..............................................................48
Using Toshiba Places ......................................................................48
Using YouTube™ ..............................................................................49
3
English
Using Hybrid TV Standard (if available) ...................................49
Using the Media Player ..................................................................50
Basic operation .......................................................................50
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......51
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......53
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......56
Other features ...................................................................................57
Panel Lock .................................................................................57
The timers ...........................................................................................57
Programme Timers – digital only ...................................57
On Timer ....................................................................................58
Sleep Timer ..............................................................................58
Energy Saving Settings ..................................................................59
Automatic Power Down ......................................................59
No Signal Power Down ........................................................59
Digital on-screen information .....................................................59
Information ..............................................................................59
Using EPG (Electronic Programme Guide) ..............................60
Using Broadcast Guide ........................................................60
Genre selection/searching ..................................................61
Using MediaGuide ................................................................61
MediaGuide screen ...............................................................61
Primary Navigation menu ...................................................61
Digital settings – parental control ............................................62
Parental PIN Setup .................................................................62
Parental Setup .........................................................................63
Network Lock ..........................................................................63
Digital settings – Channel Options ..........................................63
Selecting favourite channels .............................................63
Favourite Channel List .........................................................63
Skip channels ...........................................................................64
Locking channels ...................................................................64
Digital settings – other settings ................................................64
Subtitles .....................................................................................64
Audio languages ....................................................................64
Common Interface ................................................................65
Software Upgrade and Licences ................................................65
Searching for New Software ..............................................65
Network Upgrade ..................................................................65
Software Licences ..................................................................65
System Information and Reset TV ..............................................66
System Information ...............................................................66
Reset TV .....................................................................................66
PC Settings .........................................................................................66
Horizontal and Vertical Position .......................................66
Clock Phase ..............................................................................66
Sampling Clock .......................................................................67
Reset ...........................................................................................67
Input selection and AV connections .........................................67
Input selection ........................................................................67
Labeling video input sources ............................................68
Digital Audio Output ............................................................68
Using REGZA-LINK ...........................................................................69
Enable REGZA-LINK ...............................................................69
TV Auto Power ........................................................................69
Auto Standby ..........................................................................69
REGZA-LINK input source selection ................................69
REGZA-LINK one touch play ..............................................70
REGZA-LINK system standby .............................................70
TEXT SERVICES
Text services ......................................................................................71
Selecting modes ....................................................................71
Text information ....................................................................71
Navigating pages using Auto ............................................71
Navigating pages using LIST .............................................71
Control buttons ......................................................................72
PROBLEM SOLVING
Questions and Answers ...............................................................73
INFORMATION
License Information ........................................................................76
Information ........................................................................................78
Specifications and accessories ...................................................84
7
INSTALLING YOUR TV
English
Notes on handling the 3D glasses’ liquid crystal
shutter lenses
Do not put excessive force on the lenses.
Do not scratch the surface of the lenses with sharp
objects.
Do not drop or bend the 3D glasses.
Notes on IR communication
Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.
Do not cover the IR sensor on the 3D glasses with
stickers or labels.
Keep the IR sensor on the 3D glasses clean.
The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glasses not to work correctly.
Use the TV and 3D glasses in a place where they will not
interfere with other devices or products.
Notes on watching the TV
3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
If you use any device, such as a mobile phone or mobile
wireless device, near the 3D glasses, the 3D glasses may
not work correctly.
Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.
– 3D glasses: 0°C - 40°C (32°F - 104°F)
– TV: 0°C - 35°C (32°F - 95°F)
If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or use another light.
(It is not recommended to watch the TV in a dark room,
especially for children.)
Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.
About the connecting cable
Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “System Setup” menu. Depending on country/area, some of this television's functions may not be available.
Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
8
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference of your remote control.
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode (DTV Ant/DTV Cable/DTV Sat/ATV)
4 To switch between 2D and 3D modes
5 Widescreen viewing
6
s Stereo/bilingual transmissions
7 Digital Subtitles or Analogue TEXT Subtitle pages if available
8 Number buttons
9 Switch the Audio Description On/Off
10 To return to previous channel
11 To alter the TV volume
12 To display on-screen information
To access the index page in Text mode
13 To mute the TV sound
14 To access Quick Menu
15 To change programme positions
To change TEXT pages
16 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
17 To access Media Player Menu
18 To call up text services
19 To access the analogue or digital Channel List
20 On-screen Menus
21 To display the digital on-screen Programme Guide
22 To page up, down, left or right
23 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
24 To return to previous Menu
25 To exit menus and applications
27 Colour buttons: Text and interactive service control buttons
28 Picture still
29 Not available for this TV
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AA,
IEC R6 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 77 of this
manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
CT-90405
1
2
5
4
8
9
2
0
17
16
2
2
11
2
4
27
26
25
23
21
18
14
19
15
13
12
10
3
6
7
2
829
26 When in TV mode:
D Analogue time
display
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
During Playback:
c To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
Inserting batteries and effective range
9
English
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The RCA sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO devices, connect those
cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 79.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
o to select between TV, EXT 1, EXT 2,
HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
“F-type”
CONNECTING YOUR TV
13
CONNECTING YOUR TV
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.
NOTE:
If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments. Connect this TV
to the same router as other DLNA CERTIFIED™ products
(server).
If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 45.
If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
If you connect the TV and PC directly, use a crossover LAN
cable.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
Please refer to “Wireless Setup section on page 43.
How to use this Dual Band Wireless LAN Adaptor
If this device is going to be operated in the frequency range
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835 GHz
in France, it is restricted to indoor use.
A general authorization is required for using this device
outdoors or in public places in Italy.
This device is NOT ALLOWED to be used in the geographical
area within a radius of 20km from the centre of Ny-Alesund
in Norway.
To connect the TV to a home network -
Wired
Modem (if available)
Server PC
Router with Hub
the back of your television
Cable or Phone jack
[1] [2]
[2]
[3][2]
To connect the TV to a home network
with an internet connection - Wireless
Access point (AP)
Wireless LAN router
Modem
TOSHIBA Dual
Band WLAN
adaptor
the back of your television
Computer
14
CONNECTING YOUR TV
English
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
1 on the remote
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
1 on the remote
control. To view the television, press
1 again. The picture may
take a few seconds to appear.
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
C or c on the remote control, its
respective options will appear above.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.
To use the option, press
B and b on the remote control to
move up and down and press
C or c to select your desired
setting.
To turn on or off the TV, press
!.
To alter the volume, press + or .
+ and buttons operate as volume up/down as default.
To alter the programme position, press
p / o once and
press
u
or
U
.
To select an external input, press and hold
p / o until the
Inputs window appears, and then press
u
or
U
to select the
appropriate input source.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-20U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.
40TL963.ILLUSTRATION SHOWS
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
Ambient
Light Sensor
RED LED – Standby
GREEN LED – Power on
ORANGE LED – Programme
timer set (digital only)
USB 1 port
Media Player
USB 2 port
Media Player/Wireless LAN adaptor ready for a home
network
Control panel
3D IR
Switching on
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Using the menu system
Using the TV controls and connections
17
SETTING UP YOUR TV
English
k In step 9, when you select Manual Setup;
Press OK, and the Manual Setup screen will appear.
Press
B or b to select Network Name and press OK.
The Software Keyboard window will appear (page 47).
Input the Network Name by using the Software
Keyboard. To save your setting, press the BLUE
button.
Press
B or b to select Authentication and then press
C or c to select Open System, Shared Key, WPA-
PSK or WPA2-PSK.
Press
B or b to select Encryption, and then press C
or
c to select None, WEP, TKIP or AES.
NOTE:
Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP
or None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
There is only one key ID to set for WEP encryption.
Press
B or b to select Security Key and press OK.
Input the Security Key by using the Software
Keyboard (page 47).
To save your setting, press the BLUE button.
This item is grayed out when Encryption is None.
When Encryption is WEP, Key ID setting is available.
Press
B or b to select Key ID and press C or c to
select 1(default), 2, 3 or 4.
Press
B or b to select Done and press OK.
When the message “Wireless configuration is
complete.” appears on screen, press OK.
NOTE: Settings are not saved if BACK is pressed
before Done is selected.
l The Advanced Network Setup screen will appear.
When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On or
Off. (This should usually be set to On.)
When the DHCP function of the router is Off, set Auto
Setup to Off, and set the IP Address DNS address(es)
manually.
You can view the fixed MAC address for the TV and for
the Dual Band WLAN Adaptor, if one is installed.
Press
B or b to select Next.
m Press OK, and Network Connection Test will start.
A message will appear to indicate if the connection
was successful or it could not be completed.
NOTE: The result of Network Connection Test does
not always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.
To cancel the Network Connection Test:
Press BACK while searching for the Internet
connection.
IP Address Setup
Auto Setup
Default Gateway
Subnet Mask
IP Address
On
On
00:11:22:33:44:55
DNS Setup
Auto Setup
Secondary DNS Address
MAC Address
Primary DNS Address
Next
XXX . XXX . XXX . XXX
255 . 255 . 255 . 0
0 . 0 . 0 . 0
255 . 255 . 255 . 0
0 . 0 . 0 . 0
Advanced Network Setup
OK
Network connection was completed successfully.
20
SETTING UP YOUR TV
English
d When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto
Tuning screen.
Press
B or b to select an item and press C or c to
select your desired option.
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country you set.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a Press MENU / C c to highlight Setup icon.
b Press B / Cc to highlight System Setup icon and
press OK.
c Press b to select Satellite Settings and press OK.
d Press b to highlight a new line to add an another
satellite and press OK.
e Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C or c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
Auto Tuning
DTV and ATVTuning Mode
DTV
OthersOperator Selection
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
Satellite Settings
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Switch Type
None
LNB Power
On
Done
Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600
25
SETTING UP YOUR TV
English
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the System Setup
menu.
b With the list of channels showing, use B or b to
highlight the channel you want to move and press
c.
c Use B or b to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
d Press C to save your move.
Repeat as necessary and press EXIT.
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable/
Satellite setting.
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the System Setup
menu and press OK.
b Enter the multiplex number using the number
buttons or use
C or c to adjust the number up or
down.
c Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
Sorting positions
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
ABC1
ABC1
5
C25
C28
C30
Manual Tuning
DTV Manual Tuning - Antenna
WEAK
Signal Strength
Quality
Channel
GOOD
STRONGAVERAGE
67
Frequency
842.0 MHz
Bandwidth
Start Scan
8 MHz
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning - Antenna
2
1
7
40
ABCi
51
26
SETTING UP YOUR TV
English
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency: Input a specific frequency to be scanned
Modulation: Choose from one of five QAM modulation
options
Symbol Rate: Input a specific baud rate (KS/s) to be used for
the manual scan
Highlight Start Scan and press OK.
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Use
B or b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
and press
C or c to select the required option.
Highlight Start Scan and press OK.
DTV Settings
The channel order may be changed to suit your personal
preference.
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
c For your convenience, you can jump to specific places
in the list by one of two methods.
Line Number Jump —Use the number buttons
(0-9) to input the line number you want to select and
press OK.
It is also possible to change the Position number of a
particular channel.
Renumber —Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.
Manual Tuning for DVB-C
Manual Tuning for DVB-S
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder
1/83
Frequency
10714 MHz
Symbol Rate
22000 KS/s
Polarisation
H
Search Option
Free to Air
Channels (Antenna/Cable)
DTV Settings
Channels
Parental PIN Setup
Subtitle and Audio
Parental Control
Local Time Setting
Standby Channel Update
Common Interface
Channels Antenna TV
1ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Line No. 1/10
ABC ONE
Pos. Name
64
CONTROLS AND FEATURES
English
This feature allows you to set channels that will be skipped when
P
u or PU are used to tune.
a Select the channel you want to skip in your channel
list.
b From the Quick Menu, press b to select Channel
Options and press OK.
c Press c repeatedly to highlight the skip (8) box.
d Press OK to select. A tick will appear in the box.
e Repeat steps 1 through 4 for other channels.
f Press EXIT.
NOTE: Skipped channels cannot be selected by P
u or
P
U but still be accessed by direct number entry
(when tuned a
8 icon will be displayed in the
banner to indicate as a skipped channel).
Locking Channels stops the viewing of digital channels, and
they can only be accessed by entering the PIN.
a Select the channel you want to lock in your channel
list.
b From the Quick Menu, press b to select Channel
Options and press OK.
c Press c repeatedly to highlight the lock ( ) box.
d Press OK to select. A tick will appear in the box.
If a PIN has already been set, PIN entry will be required
to set the locked channels.
e Repeat steps 1 through 4 for other channels.
f Press EXIT.
g From this point on, when any of the channels in the
Locked Channel list are selected, the PIN must be
entered before they can be accessed.
Digital settings – other settings
In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.
a In the DTV Settings menu, press B or b to select
Subtitle and Audio and press OK.
b Press b to select Subtitle Display and press C or c
to select On or Off.
c Press B or b to select Primary Subtitle Language or
Secondary Subtitle Language and press
C or c to
select an option.
The SUBTITLE button can be used to select subtitle on or off
for the current channel only and to select the subtitle
language if more than one subtitle is available.
This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided multiple language
tracks are being broadcast.
a In the Subtitle and Audio menu, press B or b to
select Audio Type and press
C or c to select Normal
or For Hard of Hearing.
b Press B or b to select Primary Audio Language or
Secondary Audio Language and press
C or c to
select an option.
If more than one soundtrack is available, use the s
button to select between them.
Skip channels
Locking channels
Subtitles
Audio languages
Subtitle and Audio
Subtitle Type
Secondary Subtitle Language
Primary Subtitle Language
Audio Type
Primary Audio Language
Secondary Audio Language
English
English
English
Normal
English
Normal
Subtitle Display
Off
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 32TL966 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 32TL966 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 32TL966

Toshiba 32TL966 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info