458628
89
Zoom out
Zoom in
Previous page
1/102
Next page
89
Chapter 10: Appendix
Searching for a device code
If you do not know the device code for a particular
device, you can view each available code for that device
mode and sample the functions to find the code that
operates the target device.
1 Press a mode select button on the remote.
2 While holding down Q, press 8, 5, 0, 0. The mode
select button blinks twice. The remote control enters
program mode.
3 Point the remote at the target device Press , 1,
, , or . The mode select button lights up.
Then press B or b to change a code.
4 If the device responds to the remote control:
Press Q to store the device code. The mode select
button blinks twice. The remote exits program
mode.
5 If the device does not respond to the remote control:
Repeat this step until the device responds to the
remote.
When no code is found, exit the program mode by
the following operation:
Press Q. (current state is stored)
Press no key for 10 seconds. (current state is not
stored)
Note: When a search cycle is completed, the remote
displays each available code again. If no key is pressed
within 10 seconds, the remote exits program mode and
returns to the previous code.
Locking the volume keys
The remote’s volume keys ( , , and MUTE) are
locked to a device mode.
See “Operating other devices” (- p. 88).
To lock the remote’s volume keys to a specific mode:
Example: CABLE/SAT mode
1 Press CABLE/SAT.
2 While holding down Q, press 8, 0, 0, 0.
3 Press . The CABLE/SAT mode select button
blinks 2 times (locked).
The remote’s volume keys now operate the volume
of the device associated with the CABLE/SAT
mode, even when CABLE/SAT is not the current
device mode.
To unlock the remote’s volume keys:
1 While holding down Q, press 8, 0, 0, 0.
2 Press . The CABLE/SAT mode select button
blinks 4 times. The CABLE/SAT mode is unlocked.
Clearing the remote’s programming
You can clear all programmed remote control features
not related to “Device code setup” and reset the volume
lock to the TV device mode.
While holding down Q, press 8, 9, 0, 0. The mode
select button blinks 4 times.
Resetting to the factory default
You can clear changed manufacturing features.
While holding down Q, press 8, 9, 0, 1. The mode
select button blinks 4 times.
State Meaning
Locked (default)
The remote operates the TV’s volume
except the AUX mode, even when the
TV is not the current device mode.
Unlocked
The remote operates the volume of the
device associated with the current
device mode.
Each device mode has its own volume
(if the device ID has volume data).
Locked to a
specific device
mode
The remote operates the volume of the
device associated with the locked
mode, even when the locked mode is
not the current device mode.
Note: The AUX mode is not locked to
other device modes.
POWER
VOL
CH
VOL
VOL
VOL
VOL
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 32TL515U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 32TL515U in the language / languages: English as an attachment in your email.

The manual is 27,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info