527555
32
Zoom out
Zoom in
Previous page
1/90
Next page
32
CONTROLS AND FEATURES
English
DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.
a Select DNR from the Noise Reduction menu.
b Press C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The Resolution+ feature allows you to adjust the clarity levels
for your desired picture settings.
a In the Advanced Picture Settings menu, press B or
b to select Resolution+ and press OK.
b Press C or c to select On.
NOTE:
This feature may not work properly depending on the
content.
Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
The frame rate of a movie film is generally 24 frames a second
whereas the movie software such as DVD, etc. that you enjoy
watching on television at home is 30 or 25 frames a second.
The difference in frame rate may cause flickers while viewing the
films on television; set the Cinema Mode to convert the signal to
reproduce a smooth motion and picture quality.
a In the Advanced Picture Settings menu, press B or
b to select Cinema Mode and press OK.
b Press C or c to select On.
NOTE: When Picture Mode is set to Game or PC, this feature
will be grayed out and automatically set to Off.
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a In the Advanced Picture Settings menu, press B or
b to select Reset.
b Press OK.
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a In the Picture menu, press B or b to select Expert
Picture Settings and press OK to display Expert
Picture Settings menu.
b Press B or b to select Test Pattern.
c Press C or c to select On.
d Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.
a In the Expert Picture Settings menu, press B or b to
select RGB Filter and press OK.
b Press B or b to select Red, Green or Blue to adjust.
c Press C or c to select On.
d Press B or b to select Colour or Tint and press C or
c to adjust.
e Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT601 and BT709) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If BT601 or BT709 is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto.
a In the Expert Picture Settings menu, press B or b to
select Colour Decoding.
b Press C or c to select Auto, BT601 or BT709.
DNR – Digital Noise Reduction
Resolution +
Cinema Mode
Resetting the advanced picture settings
Expert Picture Settings
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 32RL938G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 32RL938G in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 32RL938G

Toshiba 32RL938G User Manual - German - 90 pages

Toshiba 32RL938G User Manual - Dutch - 90 pages

Toshiba 32RL938G User Manual - French - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info