464713
34
Zoom out
Zoom in
Previous page
1/34
Next page
AV70*
LV70*
ANALOGUE
Series
2
English
Contents
Safety Precautions ....................4
Air Circulation ...................................... 4
Heat Damage ...................................... 4
Power Supply ...................................... 4
Do ........................................................ 4
Do not .................................................. 4
Installation and important
information .................................5
Where to install.................................... 5
EXCLUSION CLAUSE ........................ 5
The Remote Control ..................6
Inserting batteries and ......................... 6
effective range of the remote ............... 6
Connecting External
Equipment ..................................7
Connecting an HDMI or DVI
device to the HDMI input ...........9
To connect an HDMI device ................ 9
To connect a DVI device...................... 9
Acceptable Video signals through HDMI
terminals .............................................. 10
Acceptable PC signals through
HDMI-1/D-SUB terminals .................... 10
Connecting a Computer ............11
To connect a PC to the
RGB/PC terminal ................................. 11
To connect a PC to the
HDMI terminal ..................................... 11
Using the Controls ....................12
Switching On ....................................... 13
Using the Remote Control ................... 13
Using the Controls ............................... 13
Startup Application ...................14
Quick Setup ......................................... 14
Auto Tuning ......................................... 14
Manual Tuning ..................................... 15
Watching TV Programmes .................. 16
Changing the Position ......................... 17
Displaying the On-screen
Information .......................................... 17
General Controls .......................18
Selecting Channels ............................. 18
The Time Display – analogue only ...... 18
Stereo and Bilingual Transmissions .... 18
Subtitles............................................... 18
Using the Quick Access (Except PC) .. 18
Using the Quick Access (PC Only) ...... 18
Sound Controls ..........................19
Volume controls and mute sound ........ 19
Dual ..................................................... 19
Bass, Treble and Balance ................... 19
Stable Sound
®
..................................... 19
Surround.............................................. 19
Bass Boost .......................................... 19
Widescreen viewing ..................20
Available Picture Size and
Position Control ................................... 21
Picture Controls .........................22
Picture Position ................................... 22
Picture Mode (Except PC) ................... 22
Picture Preferences ............................. 22
Reset ................................................... 22
3D Colour Management ...................... 22
Base Colour Adjustment ...................... 23
Colour Temperature ............................. 23
Active Backlight Control ...................... 23
Black/White Level ................................ 23
Digital Noise Reduction ....................... 24
MPEG NR – Noise Reduction ............. 24
Cinema Mode ...................................... 24
Reset Picture Settings ......................... 24
Auto Format (Widescreen) .................. 24
3
English
4:3 Stretch ........................................... 24
Blue Screen ......................................... 24
Side Panel ........................................... 24
Picture still ........................................... 24
Enjoying Photo through
USB Port .....................................25
Photo Viewer specications ................ 25
Opening Photo Viewer ........................ 25
Viewing Photo Files ............................. 25
Enjoying Music through
USB Port .....................................26
Music Player specications ................. 26
Opening Music Player ......................... 26
Playing Music Files.............................. 26
Media USB Port................................... 26
Other features ............................27
Panel Lock........................................... 27
Sleep Timer ......................................... 27
On Timer .............................................. 27
On Timer Position ................................ 27
Text Services and
Text Information .........................28
Selecting modes .................................. 28
Navigating Pages using Auto .............. 28
Navigating Pages using LIST .............. 28
Control Buttons.................................... 28
PC Settings ................................29
Horizontal and Vertical Position........... 29
Sampling Clock ................................... 29
Clock Phase ........................................ 29
Reset ................................................... 29
Input Selection and
AV Connections .........................30
Input Selection..................................... 30
Input Signal Selection.......................... 30
HDMI 1 Audio ...................................... 30
Frequently Asked Questions ....31
Specications and
Accessories ...............................33
4
English
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like
any electrical equipment, care must be taken to obtain the best results and for safety to be assured.
Please read the points below for your own safety. They are of a general nature, intended to help with all
electronic consumer products and some points may not apply to the goods you have just purchased.
The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This
will prevent overheating and possible damage
to the television. Dusty places should also be
avoided.
Heat Damage
Damage may occur if the television is left in
direct sunlight or near a heater. Avoid places
subject to extremely high temperatures or
humidity. Place in a location where the tem-
perature remains between 5°C (41°F) min. and
35°C (94°F) max.
Power Supply
The mains supply required for this equipment
is 220-240v AC 50/60Hz. Never connect to a
DC supply or any other power source. DO en-
sure that the television is not standing on the
mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will
impair its performance. In the UK, the fuse
tted in this plug is approved by ASTA or BSI
to BS1362.
It should only be replaced by a correctly rated
and approved type and the fuse cover must be
retted.
IF IN DOUBT PLEASE CONSULT A COMPE-
TENT ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections
(including the mains plug, extension leads and
inter-connections between pieces of equip-
ment) are properly made and in accordance
with the manufacturers’ instructions. Switch off
and withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.
DO be careful with glass panels on equipment.
DO NOT REMOVE ANY FIXED COVERS
AS THIS WILL EXPOSE DANGEROUS AND
‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCON-
NECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of
the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be
exposed to dripping or splashing or objects lled
with liquids, such as vases, to be placed on the
equipment.
DO NOT place hot objects or naked ame
sources, such as lighted candles or nightlights
on, or close to equipment. High temperatures
can melt plastic and lead to res.
DO NOT use makeshift stands and NEVER
x legs with wood screws. To ensure complete
safety, always t the manufacturers’ approved
stand, bracket or legs with the xings provided
according to the instructions.
DO NOT leave equipment switched on when
it is unattended, unless it is specically stated
that it is designed for unattended operation or
has a standby mode. Switch off by withdrawing
the plug, make sure your family know how to
do this. Special arrangements may need to be
made for people with disabilities.
DO NOT continue to operate the equipment if
you are in any doubt about it working normally,
or it is damaged in any way – switch off, with-
draw the mains plug and consult your dealer.
WARNING – excessive sound pressure from ear-
phones or headphones can cause hearing loss.
ABOVE ALL NEVER let anyone, especially chil-
dren, push or hit the screen, push anything into
holes, slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
5
English
Installation and important information
Where to install
Locate the television away from direct sunlight or other strong lights. Soft, indirect lighting is recom-
mended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that can support the weight of the TV. In order to maintain stabil-
ity and prevent it from falling over, secure the TV to the level surface using the strap located under the table
top stand, or to a wall using a sturdy tie to the clip on the back of the table top stand.
The LCD display panels are manufactured using
an extremely high level of precision technology,
however sometimes some parts of the screen
may be missing picture elements or have lumi-
nous spots. This is not a sign of a malfunction.
Make sure the television is located in a position
where it cannot be pushed or hit by objects, as
pressure will break or damage the screen, and
that small items cannot be inserted into slots or
openings in the case.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product while in the possession of a third party;
vii)
any damage or loss caused as a result of the owner’s failure and/or neglect to follow the in-
structions set out in the owner’s manual;
viii)
any loss or damage caused directly as a result of misuse or malfunction of the product when
used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or
damage including but not limited to the following, loss of prot, interruption of business, the loss of
recorded data whether caused during normal operation or misuse of the product.
• If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer
displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they
could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.
• Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the
image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manu-
facturers warranty. Regular use of other size modes (e.g.: Superlive) and varying the “side panel”
brightness (if available on the model) will prevent permanent retention.
SYMBOL SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightening ash with arrowhead symbol within an
equilateral t riangle is intended to alert the user to the presence of un-insulated
“DANGEROUS VOLTAGE” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the
user to the presence of important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
WARNING: To prevent the spread of re, keep candles or other open ames away
from this product at all times.
6
English
12 In TV mode: Display on-screen information
In Text mode: Access the index page
13 Mute the sound
14 Display the quick access menu
15 Exit the menu system
16 No Function
17 Go to the previous level of the menu
18 Display the on-screen menu
19 Menu navigation: ▲, ▼, ◄, ►:
In Text mode: Change the page
OK: Conrm the selection
20 Colour button: Text control buttons
Reveal concealed text
Hold a wanted page
Enlarge text display size
Select a page while viewing a
normal picture
1 Toggle between TV ON or Standby
2 Toggle between external input sources
3 Still Picture
4 To display the teletext screen
5 TEXT subtitle pages if available
6 Stereo/Bilingual transmissions
7 Number buttons
8 No Function
9 No Function
10 Change the volume
11 Change the channel
The Remote Control
Simple at-a-glance reference of your remote
control.
Inserting batteries and
effective range of the remote
Do not combine a used, old battery with a new
one or mix battery types. Remove dead batteries
immediately to prevent acid from leaking into
the battery compartment. Dispose of them in
accordance with instructions on page 34 of this
manual. Warning: batteries must not be exposed
to excessive heat such as sunlight or re.
The performance of the remote control will
deteriorate beyond a distance of ve metres or
outside an angle of 30 degrees from the centre
of the television. If the operating range becomes
reduced the batteries may need replacing.
Remove the back
cover to reveal the
battery compartment
and make sure the
batteries are inserted
the right way round.
Suitable battery
types for this remote
are AAA, 1.5V.
8
English
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear
of the television.
If you use a decoder and/or media recorder, con-
nect through the decoder and/or media recorder
to the television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder
TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC.
socket.
Before running Auto Tuning put your decoder
and media recorder to Standby.
The phono sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT
socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See
the next page.)
HDMI
®
(High-Denition Multimedia Interface)
is for use with a DVD, decoder or electrical
equipment with digital audio and video output. It
is designed for best performance with 1080i high-
denition video signals but will also accept and
display 480i, 480p, 576i, 576p, 720p and 1080p.
HDMI1 also support VGA, SVGA, XGA, WXGA
and SXGA.
NOTE: Although this television is able to con-
nect to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can
be connected to the back of the television,
therefore the relevant owners manuals for all
additional equipment must be referred to.
If the television automatically switches over to
monitor external equipment, return to normal
television by pressing the desired programme
position button. To recall external equipment,
press to select.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
For 32/40LV70**
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
9
English
Connecting an HDMI or DVI device to the HDMI input
The HDMI input on your television receives digital audio and uncompressed digital video from an
HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-
rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top
box or DVD player with HDMI or DVI output). For acceptable video signal formats.
Note:
• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of
a new standard.
Please unplug your HDMI cable rst and then try setting the following options (Lip Sync) to “Off”.
Your early HDMI source should operate properly with your television.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to
the HDMI terminal.
For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo
( ).
• If your HDMI connection is capable of 1080p
and/or your television is capable of refresh
rates greater than 50Hz, you will need a Cat-
egory 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio.
Separate analogue audio cables are not
required (see illustration).
The HDMI 3 terminal is located on the side of
the television.
HDMI OUT
VIDEO AUDIO
L R
R
L
OUT
IN
HDMI cable
HDMI device
For instruction
purposes only
To view the HDMI device video, press the
button to select HDMI 1, HDMI 2 or HDMI 3
mode.
To connect a DVI device
Connect an HDMI-to-DVI adapter cable (HDMI
type A connector) to the HDMI 1 terminal and
audio cables to the PC/HDMI1 (AUDIO) socket
(see illustration).
• The recommended HDMI-to-DVI adapter
cable length is 6.6ft (2m).
An HDMI-to-DVI adapter cable transfers
video only. Separate analogue audio cables
are required.
Note:
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic components,
turn on the television rst, and then the HDMI
or DVI device.
• When turning off your electronic components,
turn off the HDMI or DVI device rst, and then
the television.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
10
English
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
480i 720 x 480i 60Hz 15.734KHz 27MHz
480p 720 x 480p 60Hz 31.5KHz 27MHz / 27.027MHz
576i 720 x 576i 50Hz 15.625KHz 27MHz
576p 720 x 576p 50Hz 31.25KHz 54MHz
720p 1280 x 720p 50Hz 37.5KHz 74.25MHz
720p 1280 x 720p 59.94Hz / 60Hz 44.9KHz / 45KHz 74.17MHz / 74.25MHz
1080i 1920 x 1080i 50Hz 28.125KHz 74.25MHz
1080i 1920 x 1080i 59.94Hz / 60Hz 33.72KHz / 33.75KHz 74.17MHz / 74.25MHz
1080p 1920 x 1080p 50Hz 56.25KHz 148.5MHz
1080p 1920 x 1080p 59.94Hz / 60Hz 67.432KHz / 67.5KHz 148.35MHz / 148.5MHz
1080p 1920 x 1080p 24Hz / 25Hz 27KHz / 28.125KHz 74.25MHz / 74.25MHz
1080p 1920 x 1080p 30Hz 33.75KHz 74.25MHz
Acceptable Video signals through HDMI terminals
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 x 480 59.9Hz 31.469KHz 25.175MHz
VGA 640 x 480 72.8Hz 37.861KHz 31.5MHz
VGA 640 x 480 75Hz 37.5KHz 31.5MHz
VGA 720 x 400 70Hz 31.469KHz 28.322MHz
SVGA 800 x 600 56.2Hz 35.156KHz 36MHz
SVGA 800 x 600 60.3Hz 37.879KHz 40MHz
SVGA 800 x 600 72.1Hz 48.077KHz 50MHz
SVGA 800 x 600 75Hz 46.875KHz 49.5MHz
XGA 1024 x 768 60Hz 48.363KHz 65MHz
XGA 1024 x 768 70Hz 56.476KHz 75MHz
XGA 1024 x 768 75Hz 60.023KHz 78.75MHz
WXGA 1280 x 720 59.8Hz 44.772KHz 74.25MHz
WXGA 1280 x 768 59.8Hz 44.776KHz 79.5MHz
WXGA 1360 x 768 60Hz 47.712KHz 85.5MHz
SXGA 1280x1024 60Hz 63.981KHz 108MHz
SXGA 1280x1024 75Hz 79.976KHz 135MHz
Acceptable PC signals through HDMI-1/D-SUB terminals
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Note 1 : HDMI 1 terminal supports PC signal input; HDMI 2 and 3 do not support PC signal.
Note 2 : For PC input, for only supported PC signal can show the correct resolution on TV display.
11
English
Connecting a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the televi-
sion and hear the sound from the televisions speakers.
To connect a PC to
the RGB/PC terminal
When connecting a PC to the RGB/PC termi-
nal on the television, use an analogue RGB
(15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO)
socket. Select PC from the PC/HDMI 1 Audio
options in the AV Connection menu located in
the SETUP menu.
For instruction
purposes only
the back of your televisionComputer
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
To use a PC, set the monitor output resolution
on the PC before connecting it to the televi-
sion. For acceptable PC signal formats, see
page 10.
To display the optimum picture, use the PC
setting feature (see page 29).
Note:
• The PC audio input terminal on the television
is shared with the HDMI 1 analogue audio
input terminal.
• Some PC models cannot be connected to
this television.
An adapter is not needed for computers with
a compatible mini D-sub 15-pin terminal.
• Depending on the DVD’s title and the
specications of the PC on which you are
playing the DVD-Video, some scenes may
be skipped or you may not be able to pause
during multiangle scenes.
A band may appear at the edges of the
screen or parts of the picture may be ob-
scured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected, some of
the television’s features will be unavailable
e.g. Manual Settings in the SETUP menu,
Colour, Tint, Sharpness and Black/White
Level in the PICTURE menu.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
To connect a PC to the
HDMI terminal
When connecting a PC to the HDMI terminal
on the television, use an HDMI-to-DVI adapter
cable and an analogue audio cable.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). A separate
analogue cable is not necessary (see page 9).
For instruction
purposes only
the back of your televisionComputer
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
For acceptable PC and video signal formats,
see page 10.
Note:
• The edges of the images may be hidden.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
12
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
For 19/22AV70**
For 26/32AV70**
Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
13
English
Switching On
If the RED LED is unlit check that the plug is
connected to the power supply. If the picture
does not appear press on the remote con-
trol, it may take a few moments.
To put the television into Standby press on
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
Using the Remote Control
To set up the television you will now need to
use the on screen menus. Press MENU on the
remote control to see the menus.
The on-screen menu appears as a list of ve
topics. As each symbol is selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear
below.
To use the options, press ▲ or ▼ on the navi-
gation ring to move up and down through them
and use OK, ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout the manual.
For 32/40LV70**
Using the Controls
To change the volume press - .
To change the channel press P .
Press MENU and ▲ or ▼, ◄ or ► to control
the sound and picture options.
Press EXIT to nish.
To select an external input, press and then
use ▲ or ▼ to move through the list until
the appropriate input source is selected.
Please always refer to the owner’s manual of
the equipment to be connected for full details.
Please note: Inserting the headphone plug will
mute the sound from all speakers.
14
English
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Startup Application
Quick Setup
For 1st use, plug in the television and
press the button. The Quick Setup
screen will appear.
Press ◄ or ► select your language, and
then press OK, the Location screen will
appear.
Press ◄ or ► select Home or Store.
For normal home use, select Home.
4
Press ◄ or ► to select your country and
press OK.
To start Auto tuning press OK.
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed us-
ing Manual tuning in SET UP menu. See page
Auto Tuning
Note:
As new services are broadcast, it will be
necessary to re-tune the television in order to
view them.
Auto Tuning will completely re-tune the televi-
sion and can be used to up date the channel
list. It is recommended that Auto Tuning
is run periodically to ensure that all new
services are added. All current channels and
settings, e.g. locked channels, will be lost.
From the SET UP menu, press p or q to
select Auto tuning.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
Automatic Power Down
Location
Reset TV
English
UK
OK
OK
OK
OK
On
Home
OK
Watch TV
Enter
OK
EXIT
Press to display the Auto tuning menu.
Auto tuning
Previoous settings will be lost!
Press EXIT for no change.
Press OK key to start Auto tune.
!
Press to start the automatic search.
The search will begin for all available
stations.
4
When the automatic search is completed,
the TV will automatically appear the SET
UP menu.
Closing the Auto tuning menu, press EXIT.
Note:
When you preset the channel which sound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctly if the radio waves transmit badly. At
that time, preset the channel by Manual tuning.
15
English
Manual Tuning
From the SET UP menu, press p or q to
select Manual tuning.
Press to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange and press ◄ again.
Press p or q to move through the list to
your preferred position. As you do so the
other stations will move to make room.
Press t to store programme position.
4
Press to display the breakdown menu.
Press t or u to select an item, then press
p or q to select the item as shown below.
Programme
Manual tunning
1 B / G A C69 0
A B C D E F G H
A
Programme:
The number to be pressed on the remote
control.
B
System:
Specic to certain areas.
C
Colour system:
Factory set to Auto, should only be
changed if problems are experienced, i.e.
NTSC input from external source.
D
Programme skip:
Means nothing has been stored or the
facility to skip the channel is ON.
E
Channel:
The channel number on which a station is
being broadcast.
F
Search:
Search up and down for a signal.
G
Manual ne tuning:
Turn on to execute ne tune function. Turn
off to execute manual ne tune funftion.
H
Station:
Station identication. Use the p or q
and ◄ or ► buttons to enter up to seven
characters.
Use p or q to highlight the desired position.
We suggest Pos. 0 for a media recorder.
Programme
Manual tunning
1 B / G A C69 0
Note:
Different Channel numbers may be
displayed.
Press to select. If the channel chosen
for the media recorder is set to skip, Skip
should be removed before storing.
Press to select System and use p or q to
change if required.
System
Manual tunning
B / G A C69 01
Then press to select Search.
Press p or q to begin the search. The search
symbol willash.
Search
Manual tunning
B / G A C69 01
Each signal will be shown on the television, if
it is not your media recorder, press p or q
again to restart the search.
When your media recorder signal is found,
press to move along to Station. With p,
q, and put in the required characters,
e.g. VCR.
Station
Manual tunning
B / G A V C RC69 01
Press to save.
Repeat for each position you want to tune or,
press MENU to return to the list of channels
and select the next number to tune.
Press EXIT when you have nished.
16
English
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
Press to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange.
Press q to select the new position “2”,
then press t.
4
Press p to select the channel MNOP, then
press u.
Press p to select the new position “1”
then press t.
Conrm new Manual tuning menu.
Watching TV Programmes
Selecting the menu language
Choose from 22 different languages (English,
French, German, Spanish, Italian, Dutch,
Portuguese, Swedish, Danish, Norwegian,
Finnish, Polish, Turkish, Hungarian, Slovak,
Czech, Russian, Romanian, Bulgarian, Serbian,
Greek, Croatian) for the On-Screen Display.
Press MENU, then press t or u to display
the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
English
UK
OK
OK
On
Home
Edit
RETURN
Back
Press p or q to select Language.
Press t or u to select the desired language.
Skip
To prevent certain channels from being viewed,
positions can be skipped.
From the SET UP menu, press p or q to
select Manual tuning.
Use p or q to highlight the position to be
skipped and press to select.
Press to select Programme skip and use
p or q to turn Skip on, and then press .
Programme skip
Manual tunning
B / G A C69 01
4
Press RETURN and repeat from Step 2 or
press EXIT.
Each position has to be individually selected.
To turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by P
and P . or by the controls on the televi-
sion, but can still be accessed by the number
buttons on the remote control.
Sorting positions
The TV is capable of receiving a number of dif-
ferent channels depending upon where you live.
Sorting programme position is an easy way of
storing each channel on the programme posi-
tion of your choice.
Ex.: To swap channel ABCD (Prog. 1) for chan-
nel MNOP (Prog. 2).
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
17
English
Changing the Position
Enter the desired position number using
the Number buttons on the remote control.
For positions below 10, use 0 and the
requires number e.g., for position 1.
3
You can also change the position by using
P or P .
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between different format
channels will takes several seconds.
Displaying the On-screen
Information
Press to display the following on-
screen information.
3
The information will disappear in about 5
seconds.
Position or external input mode
selected
Position skip on/off information
Label (if set)
Mono/Stereo/Dual audio status
To erase the display instantly, press EXIT.
18
English
General Controls
The General Controls will allow you to select channels and information, use the sound controls, per-
sonalise the picture style, and select external equipment.
Selecting Channels
To select a channel use the numbered buttons
on the remote control.
Channels can also be selected using P and
P .
To display on-screen information such as posi-
tion, input mode or stereo/mono signal, press
. Press again to cancel.
The Time Display – analogue only
The time display facility allows the current
(text service) time to be seen on the television
screen.
Press whilst watching a normal televi-
sion broadcast to see the time display from the
broadcaster. It will remain on screen for about
15 seconds.
Note:
This display may not be available in some
cases.
Stereo and Bilingual
Transmissions
If stereo or dual language broadcasts are trans-
mitted the word Stereo or Dual will appear on
the screen each time channels are changed, dis-
appearing after a few seconds. If the broadcast
is not in stereo the word Mono will appear.
Stereo: Press to select Stereo or Mono.
Bilingual: If a bilingual programme is offered,
the word Dual will display on screen. To change
between languages, press to switch be-
tween Dual 1, Dual 2 or Mono.
Subtitles
If Subtitles are available for your current pro-
gramme, pressing the SUBTITLE button will
toggle Subtitles on or off.
Using the Quick Access
(Except PC)
The quick access menu helps you access some
options quickly such as Picture Mode, Picture
Size, and Sleep Timer. Press the QUICK button
to display the Quick access menu and use
▲ or ▼ to select the option you would like to
change.
Source Quick access item Description
Except PC
Picture Mode See age 22
Picture Size See age 20
Sleep Timer See age 27
Source Quick access item Description
Except PC
Picture Size See age 20
Sleep Timer See age 27
Using the Quick Access (PC Only)
Quick access helps you access some options
quickly, such as Picture Size and Sleep Timer.
Press QUICK to display the Quick access and
use ▲ or ▼ to select the option.
Quick access
19
English
Sound Controls
Volume controls and mute sound
Volume
Press or to adjust the volume.
Sound Mute
Press once to turn the sound off and again
to cancel.
Dual
If a programme or lm is being broadcast with
a soundtrack in more than one language, the
DUAL feature allows selection between them.
Press MENU and ◄ or ► to select SOUND.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
RETURN
Back
OK
Enter
Use q to highlight Dual, and then press
or ► to choose between Dual 1 or Dual 2.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
RETURN
Back
OK
Enter
Bass, Treble and Balance
The sound controls are accessible in digital
and analogue modes.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass, Treble or
Balance and ◄ or ► to change the setting.
Stable Sound
®
The Stable Sound feature limits high volume
levels in order to prevent the extreme changes
in volume that can occur when channels are
changed or a programme switches to a
commercial.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Stable Sound and
or ► to select On or Off.
Surround
Bass boost enhances depth of the sound.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass boost and ◄ or
to select On or Off.
Bass Boost
Surround enhances depth of the sound.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Surround and ◄ or
to select On or Off.
20
English
Subtitle
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a
number of formats.
Native
When using a PC connected via HDMI this
setting will show the picture without over
scan, i.e. WYSIWYG.
This option is only available when
watching video signal source via HDMI.
Wide
Use this setting when watching a
widescreen DVD, widescreen video tape
or a 16:9 broadcast (when available). Due
to the range of widescreen formats (16:9,
14:9, 20:9 etc.) black bars may be visible
on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast.
Super Live
This setting will enlarge a 4:3 image to
t the screen by stretching the image
horizontally and vertically, holding better
proportions at the centre of the image.
Some distortion may occur.
Cinema
When watching letterbox format lms/
video tapes, this setting will eliminate or
reduce the black bars at the top and bottom
of the screen by zooming in and selecting
the image without distortion.
Subtitle
When subtitles are included on a letterbox
format broadcast, this setting will raise
the picture to ensure that all the text is
displayed.
14:9
Use this setting when watching a 14:9
broadcast.
Press QUICK to display the QUICK access
menu. Use ▲ or ▼ to highlight the Picture Size,
and press ◄ or ► to select the option.
dradnatSedoM erutciP
Wide
Picture Size
Sleep Timer
Off
Quick access
You can choose the picture size from Native, Wide, 4:3, Super Live, Cinema, Subtitle or 14:9.
Using the special functions to change the size of the displayed image (i.e. changing the
height/width ratio) for the purposes of public display or commercial gain may infringe on
copyright laws.
21
English
Screen Mode Size RF ATV/ Video
/S-video /
Compornent /
HDMI/
PAL/
SECAM/
576i/
576P
RF ATV/ Video
/S-video /
Compornent/
HDMI)/
NTSC3.58/
NTSC4.43/
PAL60/
480i/
480P
HDMI/
1440x576p
HDMI/
1440x480p
Component/
HDMI/
720p
Component/
HDMI/
1080i
Native
(*only available
for HDMI input)
H
V
Wide
H Yes Yes Yes Yes Yes Yes
V
4:3
H Yes Yes Yes Yes Yes Yes
V
Super Live
(Panoramic
scaled.)
H Yes Yes Yes Yes Yes Yes
V Yes Yes Yes Yes Yes Yes
Cinema
H Yes Yes Yes Yes Yes Yes
V Yes Yes Yes Yes Yes Yes
Subtitle
H Yes Yes Yes Yes
V Yes Yes Yes Yes
14:9
H Yes Yes Yes Yes
V Yes Yes Yes Yes
Available Picture Size and Position Control
Pic size PC/HDMI PC format
Wide
(*Not available when receive
WXGA:1360x768@60Hz source. )
H
V
Normal
H
V
Note:
Above “— mark” means No function.
22
English
Picture Controls
Most of the picture controls and functions are available in both digital and analogue modes.
Note: features not available will be greyed out.
Picture Position
Press MENU and ◄ or ► to display the
SET UP menu.
Press ▲ or ▼ to select Picture position.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
Automatic Power Down
Location
Reset TV
English
UK
OK
OK
OK
OK
OK
On
Home
OK
Watch TV
Enter
OK
EXIT
Press to view the options available for
the picture format that has been selected.
Press ▲ or ▼ to select an option, then
or ► to adjust the settings.
The options differ depending on the cur-
rently selected widescreen format and the
input signal.
Picture Position
Horizontal position
Vertical position
Reset
0
0
OK
To return to the original factory settings
select Reset in the Picture Position
menu and press .
Picture Mode (Except PC)
This TV offers the choice of personalising the
picture style.
User, Dynamic, Standard, Mild, Movie,
and Game are preset options and affect may
features/settings within the TV.
Press QUICK on the remote and ▲ or ▼ to
select Picture Mode.
Press ◄ or ► to select the picture mode
you prefer and press EXIT.
Note: The picture mode you select affects the
current input.
Picture Preferences
You can customise current picture mode settings
while selecting User.
From the PICTURE menu select Picture
settings and press .
Press ▲ or ▼ to select either Backlight,
Contrast, Brightness, Colour, Tint,
Sharpness, Black/White Level, Cinema
mode, or Colour Temperature.
Press ◄ or ► to adjust the settings.
Reset
This feature resets all picture settings to the
factory settings.
Note: If any picture settings have not been
changed, Reset is not available.
In the PICTURE menu press b to select
Reset and press .
3D Colour Management
When 3D Colour management is set to On it
allows the ”Base colour adjustment” feature to
become available.
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red, Green, Blue, Yellow, Magenta or Cyan.
From the PICTURE menu select Picture
settings and press .
From the Picture Settings menu, press
▲ or ▼ to select Cinema mode.
Press ◄ or ► to select On or Off.
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
23
English
Base Colour Adjustment
The Base Colour adjustment feature allows
the adjustment of individual colours to suit per-
sonal preference. This can be useful when using
an external source. It only can be adjusted when
3D Colour Management is set to On.
From the PICTURE menu select Base
Colour adjustment and press .
Press , then press ▲ or ▼ to select an
item you want to adjust.
OK
Hue Saturation Brightness
Base colour adjustment
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
OK
Enter
RETURN
Back
Press , and then press ◄ or ► to select
Hue, Saturation or Brightness.
4
Press ▲ or ▼ to adjust the settings as
required.
Note:
In the PC Input mode, this function is not
available.
Colour Temperature
Colour Temperature increases the ‘warmth’ or
“coolness” of a picture by increasing the red or
blue tint.
In the PICTURE menu press to select
Picture Settings and press .
The Picture Settings menu displays.
EXIT
Watch TV
OK
Enter
Picture Settings
Active Backlight Control
3D Colour management
Base colour adjust
DNR
MPEG NR
On
On
Low
Low
PICTURE
OK
OK
Press ▲ or ▼ to select
Color Temperature and then press
or ►.
The Color Temperature menu displays.
Edit
RETURN
Back
Picture settings
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Black/White Level
Cinema mode
Colour Temperature
Reset
User
100
100
50
50
0
50
High
On
Cool
OK
Press ◄ or ► to select the
Color Temperature setting (Medium,
Warm, Cool).
Colour Temerature
Colour Temperature
Red Level
Green Level
Blue Level
Cool
0
0
0
4
Press ▲ or ▼ to select the option you want
to adjust, and then press ◄ or ► to adjust
the settings.
Press RETUREN to return to the previous
menu.
To return the Colour Temperature set-
tings to the factory defaults, select Reset
and press .
Active Backlight Control
When Active backlight control is activated it will
automatically optimise the backlighting levels
for dark scenes.
In the PICTURE menu press to select
Active Backlight Control.
Press ◄ or ► to select On or Off.
Black/White Level
This function increases the strength of dark
areas of the picture, which improves picture
denition.
In the PICTURE menu press to select
Picture Settings and press .
The Picture Settings menu displays.
Press ▲ or ▼ to select Black/White
Level and then press ◄ or ►.
Press ◄ or ► to adjust the level. The effect
depends on the broadcast and is most
noticeable on dark colours.
24
English
Digital Noise Reduction
DNR (Digital Noise Reduction) enables you
to “soften” the screen representation of a weak
signal to reduce the noise effect.
From the PICTURE menu, press ▲ or ▼
to select DNR.
Press ◄ or ► to select Auto, Off, Low,
Middle or High.
Note:
This function is not available for PC input.
MPEG NR – Noise Reduction
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this effect
by smoothing out the edges.
In the PICTURE menu press to select
MPEG NR and press .
Press ◄ or ► to select Off, Low, Middle
or High.
Cinema Mode
A movie lm’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that
you enjoy watching on television at home runs
at 30 (NTSC) or 25 (PAL) frames a second. To
convert this signal to reproduce a smooth motion
and picture quality, select the Cinema mode.
From the PICTURE menu select Picture
settings and press .
Press ▲ or ▼ to select Cinema mode
Press ◄ or ► to select On or Off.
Reset Picture Settings
This feature allows you to reset the current
Picture Settings to the default values.
In the PICTURE menu press to select
Picture Settings and press .
Press ▲ or ▼ to select Reset.
Press .
Auto Format (Widescreen)
When this television receives a true Widescreen
picture and Auto format is On, it will automatically
be displayed in Widescreen format, irrespective
of the television’s previous setting.
Press MENU, and then press ◄ or ► to
display the FUNCTION menu.
Press ▲ or ▼ to select Auto format and
or ► to select On or Off.
4:3 Stretch
When 4:3 stretch is activated, this function
will switch 4:3 format programmes into a full
screen picture.
From the FUNCTION menu, press ▲ or
to select 4:3 stretch.
Press ◄ or ► to select On or Off.
Note:
In HDMI signal format, this function is available.
Blue Screen
When Blue screen is selected the screen will
turn blue and the sound will be muted when no
signal is received.
From the FUNCTION menu, press ▲ or
to select Blue screen.
Press ◄ or ► to select On or Off.
Note:
In the PC input mode, teletext mode, this
function is not available.
Side Panel
The Side panel feature lightens or darkens the
band each side of the screen when in 4:3 or
14:9 format. This helps prevent image reten-
tion of the band and can also make viewing in
bright or dark conditions more comfortable.
From the FUNCTION menu, press ▲ or
to select Side panel.
Press ◄ or ► to adjust the settings as
required.
Picture still
Press to freeze the picture.
Even if an image is frozen on the TV screen,
the pictures are running on the input source.
Audio continues to be output as well.
To return to a moving picture, press again.
Note:
If you use this function except for the purpose
of your private viewing and listening, it
may infringe the copyright protected by the
copyright laws.
25
English
Enjoying Photo through USB Port
The Photo Viewer allows you to playback JPEG les from a USB storage device.
Photo Viewer specications
Data type: JPEG Exif ver2.2
File format: DCF ver1.1
Maximum number of les: 2048 les
Maximum photo resolution: 8196 x 8196 pixels
PLEASE NOTE
• Gently insert the USB device into the port and do not
remove while viewing Media Player.
• USB device: USB Mass Storage Class device (MSC)
• Connectivity is not guaranteed for all devices.
• Connect the USB device to the TV directly.
• Do not use a USB hub.
• You must obtain any required permission from
copyright owners to use copyright content. Toshiba
cannot and does not grant such permission.
To set Interval time and Repeat
settings for Slideshow
Press QUICK to open the Quick access
when viewing a photo.
Press ▼ or ▲to select either Interval
Time or Repeat.
Press ◄ or ► to adjust the setting and
press OK.
Note: If Repeat is On, Slideshow starts photo
viewing from the rst photo in the folder after
reaching the nal photo.
Opening Photo Viewer
To open Photo Viewer:
Press to MEDIA.
Gently insert a supported USB storage
device to the USB port on the side of the
TV. The Photo Viewer will open.
Note: If inserting and removing the USB
connector frequently, the Photo Viewer
may not appear.
Press ▲ or ▼ to select the le name of
the photo you want to view.
When you select a folder name, press
OK to move to the next hierarchy.
To move back to the previous hierarchy,
press ▲ or ▼ key to highlight the folder
and press OK.
Press OK to view the selected photo.
• To view the previous or next photo, press ▲
or ▼.
• To rotate the photo, press ◄ or ►.
Press to display le status information
(content number, photo title, shooting date and
time, resolution etc.). The information will be
removed by time-out (about 15 sec) or press-
ing again.
Slideshow
This view allows you to watch the slide show
of the photos. In this view mode, the only
contents it locates on the same directory shall
be played.
To start Slideshow, press OK when viewing a
photo. Slideshow stops at the last photo in the
directory.
Press to display le status information.
The information will be removed by time-out
(about 15 sec) or pressing again.
Viewing Photo Files
To View Photos
Press ◄ or ► to select to view
photos.
26
English
Enjoying Music through USB Port
The MP3 Player allows you to playback MP3 les from a USB storage device.
Music Player specications
File format: MP3
Sampling frequency: 32kHz ~ 48kHz (MPEG
Layer1/2); 8kHz ~ 48kHz (MPEG Layer3)
Bit rate: 32kbps ~ 448kbps (MPEG Layer1/2);
8kbps ~ 320kbps (MPEG Layer3)
Opening Music Player
To open Music Player:
Press to MEDIA.
Gently insert a supported USB storage
device to the USB port on the side of the
TV. The Music Player will open.
Note: If inserting and removing the USB
connector frequently, the Music Player
may not appear.
• To select the previous or next MP3, press ▼
or ▲.
• Press ◄ or ► to:
: go to the previous MP3
/ : play or pause the selected MP3
: stop play
: go to the next MP3
: rewind the selected MP3
: fast forward the selected MP3
: select the desired repeat interval:
- No Repeat
- Repeat 1: repeat the selected MP3 once
- Repeat Dir: repeat all MP3 les in the
selected folder
: select the desired equalizer setting:
- Normal
- Class
- Rock
- Pop
- Jazz
and press OK to conrm the setting.
Playing Music Files
To Play Music
Press ◄ or ► to select to play
music.
Press ▼ or ▲ to select the le name of
the MP3 you want to play.
When you select a folder name, press
OK to move to the next hierarchy.
To move back to the previous hierarchy,
press ▲ or ▼ key to highlight the folder
and press OK.
Press OK to play the selected MP3.
Media USB Port
The USB Photo Viewer allows you to view
media les from a USB storage device (not all
devices supported).
Open les automatically or manually and view
them directly on the screen.
Supported le formats include: JPEG (Max.
8192 x 8192 pixels, Min. 96 x 96 pixels, YUV
Data); MP3.
Maximum number of les: 2048
Music Player specications
File format: MP3
Sampling frequency: 32kHz ~ 48kHz (MPEG
Layer1/2); 8kHz ~ 48kHz (MPEG Layer3)
Bit rate: 32kbps ~ 448kbps (MPEG Layer1/2);
8kbps ~ 320kbps (MPEG Layer3)
Does not support TV out when input at Media.
27
English
Other features
Panel Lock
Panel lock disables the buttons on the television.
All buttons on the remote control can still be used.
From the FUNCTION menu, press ▲ or
to select Panel lock.
Press ◄ or ► to select On or Off.
When Panel lock is On, a reminder will appear
when the buttons on the television are pressed. If
the standby button is pressed the television
will switch off and can only be brought out of
standby by using the remote control.
Sleep Timer
The television can be set to turn itself Off after
a certain length of time.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
Edit
TIMER
Sleep timer
On timer
On timer Position
Off
00:00
0
RETURN
Back
Press ▲ or ▼ to select Sleep Timer
(Turn off the TV).
The timer display will set by off, 15, 30,
45, 60, 90, or 120 minutes.
On Timer
This feature allows you to set the television to
turn on automatically to a preset channel at a
certain time of day or after a certain length of
time. When On timer is set to On, the green On
Timer indicator on the front of the television is lit.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
Press ▲ or ▼ to select Sleep timer (Turn
off the TV).
Press ◄ or ► to modify the time the TV
should turn on, or use the number keys to
enter the time.
Note:
The TV will automatically turn itself off after
approximately 15 min if tuner is no signal.
On Timer Position
Use the On timer position if you want the TV to
turn itself on in a selected channel.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
Press or to select On timer position.
Press ◄ or ► to select the channel the
TV should turn on in.
28
English
Text Services and Text Information
This television has a multi-page text memory, which takes a few moments to load. It offers two Modes
of viewing text – Auto will display Fastext, if available. LIST will store your four favourite pages.
Control Buttons
Below is a guide to the functions of the remote
control text buttons.
Displays the index/initial page:
Press to access the index/initial page. The
page displayed is dependant on the broad-
caster.
Reveals concealed text:
To discover the solutions on quiz and joke
pages press the button.
Holds a wanted page:
At times it is convenient to hold a page of text.
Press and will appear in the top left of the
screen. The page will be held on-screen until
the button is pressed again.
Enlarges the text display size:
Press once to enlarge the top half of the
page, press again to enlarge the bottom half of
the page. Press again to revert to normal size.
Selects a page while viewing a normal
picture:
Enter the page number then press , a nor-
mal picture will be displayed. The television will
indicate when the page is present by display-
ing the page number at the top of the screen.
To display news ashes:
Select the news ash page for the chosen
text service (see the index page of your text
service).
By pressing , news ashes will be dis-
played as and when they are broadcast. Press
again to cancel the display.
How to change the page:
Press ▲or▼ to change the page.
Press ◄or► to change the sub page when a
sub page is available.
The news ash page must be cancelled before
changing channels.
Selecting modes
The text character set will be automatically
chosen based on the language setting in the
SET UP menu.
Select Teletext from the FUNCTION
menu.
Using ◄ or ► to choose from Auto, or
LIST then press EXIT.
Navigating Pages using Auto
If Fastext is available, four coloured titles will
appear at the base of the screen.
To access one of the four given subjects, press
the relevant coloured button on the remote control.
For further information on your particular text
system(s), see the broadcast text index page
or, consult your local Toshiba dealer.
Navigating Pages using LIST
If Fastext is available, four coloured titles with
numbers 100, 200, 300 and 400 have been
programmed into the television’s memory.
To view these pages press the relevant col-
oured buttons.
To change these stored pages press the relevant
coloured button and enter a new 3 digit number.
This number will change in the top left of the
screen and in the coloured highlight. Press OK
to store. The bars at the bottom of the screen
willash white. Whenever OK is pressed all four
page numbers showing at the bottom will be
stored and the previous ones will be lost.
If OK is not pressed the selection will be for-
gotten when text is cancelled.
Other pages may be viewed by entering the 3
digit page number – but DO NOT press OK or
these pages will be stored.
29
English
PC Settings
Most of the picture controls and functions are available. However features not available will be
greyed out.
In the PC input mode, the Manual Setting is not displayed.
First press until the video input mode list appears on the screen, then press ▲ or ▼ and in order
to select the PC input mode.
This function may not be available for some signal or if no signal is received.
The optimum points of the clock phase and sampling clock adjustments may be incomprehensible
according to the input signals.
Horizontal and Vertical Position
Connect the PC (as shown in the “Connecting
a Computersection) and ensure that a picture
is showing on the television screen. The picture
position may now be adjusted to suit personal
preference.
Press MENU then press ◄ or ► to
display the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
English
UK
OK
OK
On
Home
RETURN
Back
Enter
OK
Press ▲ or ▼ to select PC Setting, and
then press to display the PC Setting
menu.
Press ▲ or ▼ to select an option you
want to adjust. Press ◄ or ► to adjust the
settings as required.
Horizontal position
Vertical position
Sampling clock
Clock phase
Reset
0
0
0
0
OK
Sampling Clock
Adjusting the Sampling clock alters the
number of pulses per scan, this will clear verti-
cal lines on the screen.
From the PC Setting menu, press ▲ or
to select Sampling clock.
Press ◄ or ► to optimize the picture.
Clock Phase
The Clock phase matches the PC signal with the
LCD display.
Adjusting this can clear horizontal stripes and
picture blur.
From the PC setting menu, press ▲ or ▼
to select Clock phase.
Press ◄ or ► to obtain a clear picture.
Reset
From the PC setting menu, press ▲ or ▼
to select Reset.
Press .
Note:
When a PC is connected using HDMI none of
these functions will be available.
The screen is disrupted momentarily when adjust-
ing PC settings. This is not a sign of malfunction.
The default settings and adjustment ranges may
vary depending on the input signal format.
30
English
Input Selection and AV Connections
Use the Input Selection feature if the television does not switch over automatically when using an
external device.
Input Selection
Use the Input Selection window if the television
does not switch over automatically.
Pressing , a list will appear on-screen
showing all external equipment. Use ▲ or
▼ to highlight and OK to select.
Model 19/22AV70**
Model 26/32AV70**
Model 32/40LV70**
Note:
19/22/26/32AV70** series does not have HDMI
3 Input.
HDMI
®
displays equipment connected to
Input HDMI on the back or side of the televi-
sion. It is designed for best performance with
1080i (1080P for 32/40LV70**) high denition
signals.
Input Signal Selection
You can select source of AV or S-VIDEO from
this function.
From the Ext1 (Ext2) Input menu, press ◄ or
to select AV or S-VIDEO.
AV connection
HDMI1 audio
Lipsync
EXT1 input
Auto
On
AV
Note:
• Source display will change to 1S when select
S-VIDEO.
• Ext2 Input for Model Model 26AV70**/
32AV70**/3240LV70**/40LV70**.
HDMI 1 Audio
If the connected HDMI source does not support
digital audio, plug the audio cable into PC/HDMI 1
(AUDIO) on the back of the television (as shown
in theConnecting an HDMI or DVI device to the
HDMI inputsection), then use the HDMI 1 Audio
setting.
Press MENU then press ◄ or ► to dis-
play the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
English
UK
OK
OK
On
Home
RETURN
Back
Enter
OK
Press ▲ or
to select AV connection, and then
PRess to display the AV connection
menu.
Press ◄ or ► to select Auto, Digital or
Analogue.
AV connection
HDMI1 audio
Lipsync
EXT1 input
Auto
On
AV
Note:
The Lip Sync function is only available in HDMI
mode.
31
English
Frequently Asked Questions
Q
Why is there no sound or picture?
A
Check that the television is on and that
all connections are made properly.
Q
There is a picture, but why is there little
or no colour?
A
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
The colour is factory set to Auto to auto-
matically display the best colour system.
To manually change the colour system:
With the external source playing, select
Manual setting from the SET UP menu.
Using ▲ or ▼ to choose from Auto,
NTSC 3.58, NTSC 4.43, SECAM or
PAL.
Q
Why doesn’t the video/DVD being
played show on-screen?
A
Make sure the VCR or DVD player is
connected to the television, then select
the correct input by pressing .
Q
Why is there a good picture but no
sound?
A
Check all cable connections and that
the volume has not been turned down or
that the sound has not been muted.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a
different television station. Manual ne
tuning may help:
Select the Manual tuning in the SET
UP menu.
Highlight the station and press OK, then
press ◄ or ► to select Manual ne
tuning.
Using or to adjust to get the best pic-
ture and sound. Press OK and then EXIT.
Q
Why doesn’t the remote control work?
A
Check that the batteries aren’t dead or
inserted incorrectly.
Q
Why are there problems with text?
A
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some
detail.
Q
Why are the four coloured text numbers
visible but no text?
A
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
no information is available. Select a
broadcasting channel and press to
access.
Q
Why are the colours wrong when an
NTSC source is played?
A
Connect the source via a SCART cable
and play. Select Manual setting from
the SET UP menu and set the Colour
System to Auto.
Below are the answers to some of the most common queries.
For more information go to www.toshiba.co.uk
33
English
Specications and Accessories
Broadcast Systems/Channels
PAL-I UHF UK21-UK69
PAL-B/G UHF E21-E69
VHF E2-E12, S1-S41
SECAM-L UHF F21-F69
VHF F1-F10, B-Q
SECAM-D/K UHF R21-R69
VHF R1-R12
Video Input PAL, SECAM, NTSC
3.58/4.43
External connections
MODELS 19/22
EXT1 Input/Output 21-pin
SCART
RGB
A/V, S-video
EXT2 Input Jacks
Phono Jacks
Y, PB/CB,
PR/CR
Audio L + R
EXT3 Input Jack
Phono jacks
Video
Audio L + R
HDMI 1/2 Input HDMI
®
PC/HDMI 1
Audio
Input Phono Jacks Audio L + R
PC Input D-sub RGB
MODELS 26/32/40
EXT1 Input 21-pin
SCART 1
A/V, RGB
EXT2 Input/Output 21-pin
SCART 2
A/V, S-video
EXT3 Input Phono Jacks
Phono Jacks
Y, PB/CB,
PR/CR
Audio L + R
EXT4 Input Phono Jacks
Phono Jacks
Video
Audio L + R
PC Input D-Sub RGB
HDMI 1/2/3 Input HDMI
®
PC/HDMI 1 Audio 3.5 Mini Jack Audio L + R
Display 16:9
Sound Output
(At 10% Distortion)
Model 19 3W + 3W
22 3W + 3W
26 5W + 5W
32 10W + 10W
40 10W + 10W
Power Consumption
As specied in
EN60107-1: 1997
Model 19 40W
22 55W
26 80W
32AV70** 100W
32AV70**1 135W
32LV70** 115W
32LV70**1 135W
40LV70** 150W
40LV70**1 200W
Standby
(approx.)
Model 19 0.9W
22 0.9W
26 0.9W
32 0.9W
40 0.9W
Dimensions
(approx.)
Model 19
35.8cm(H)x48.0cm(W)x18.8cm(D)
22
40.0cm(H)x55.5cm(W)x19.5cm(D)
26
47.0cm(H)x66.5cm(W)x19.2cm(D)
32
56.4cm(H)x79.8cm(W)x23.3cm(D)
40
70.6cm(H)x98.9cm(W)x27.6cm(D)
Weight
(approx.)
Model 19 5.5kg
22 6.5kg
26 9.0kg
32AV70** 12.5kg
32AV70**1 10.0kg
32LV70** 12.5kg
32LV70**1 10.0kg
40LV70** 19.0kg
40LV70**1 17.0kg
Headphone Socket 3.5mm Stereo
Operating Conditions Temperature: 5
o
C - 35
o
C
(41
o
F - 94
o
F)
Humidity: 20% - 80%
(non-condensing)
Accessories Remote Control
2 Batteries (AAA 1.5V)
Power Cord
User Manual
Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
Stereo Nicam
2 Carrier System
Visible Screen
Size
(approx.)
Model 19 47cm
22 55cm
26 66cm
32 80cm
40 102cm
34
English
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do
not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products The crossed out wheeled dust bin symbol indicates that products
must be collected and disposed of separately from household waste. Integrated
batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after
August 13, 2005. By participating in separate collection of products and batteries, you will help to
assure the proper disposal of products and batteries and thus help to prevent potential negative
consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your
country, please contact your local city ofce or the shop where you purchased the product.
Disposal of batteries and/or accumulators.
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators
must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specied values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) dened in the Battery Directive (2006/66/EC),
then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will
appear below the crossed out wheeled dust bin symbol.By participating in separate
collection of batteries, you will help to assure the proper disposal of products and batteries and
thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your
country, please contact your local city ofce or the shop where you purchased the product.
34
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Printed on recycled paper. 100% Chlorine free.
© TOSHIBA Television Central Europe Sp. z o.o.
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
TOSHIBA Television Central Europe Sp. z o.o.
ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland
Specication is subject to change without notice.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 26LV703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 26LV703 in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 26LV703

Toshiba 26LV703 User Manual - German - 34 pages

Toshiba 26LV703 User Manual - Dutch - 34 pages

Toshiba 26LV703 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info