528201
77
Zoom out
Zoom in
Previous page
1/91
Next page
77
PC connection
As PCs are sometimes supplied with a “conventional” CRT monitor, you may need to adjust the display settings of your PC’s
graphic card; otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor), select “1360 x
768” for the screen resolution, and select “60 Hz” for the on-screen refresh rate. Switch off your PC, and then connect it to your
TV while both items are switched off.
Monitor display modes
(according to graphic card)
Mode Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 x 480 59.940 Hz 31.469 kHz 25.175 MHz
SVGA 800 x 600 60.317 Hz 37.879 kHz 40.000 MHz
XGA 1024 x 768 60.004 Hz 48.363 kHz 65.000 MHz
WXGA 1280 x 720 60.000 Hz 45.000 kHz 74.250 MHz
WXGA 1280 x 768 59.870 Hz 47.776 kHz 79.500 MHz
WXGA 1360 x 768 60.015 Hz 47.712 kHz 85.500 MHz
Select PC input
(1) Switch on the TV.
(2) Switch on the computer.
(3) Select the PC input mode on the TV
(see page 18). (When you use an
HDMI cable, select HDMI input
mode.)
Note:
The PC audio input terminal on the TV
is shared with the HDMI 1 analogue
audio input terminal.
If there is no video signal from the
computer when the TV is in PC mode,
No Signal will appear on the TV
screen.
If a digital PC connection does show
a picture, proper working is not
guaranteed. Digital PC connection
is not granted for this TV.
Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use
an HDMI cable to connect the TV to your PC. When the HDMI cable is used, the
audio cable is no longer required. If you use the HDMI-to-DVI cable, please connect
audio cable in the same way as VGA cable. Connect cables carefully. Do not bend
or break the connector pins.
To adjust the contrast:
1
During PC mode, press MENU SETUP to display the Main Menu screen.
2
Press to select Picture, and then press ENTER/CH LIST .
Press to select Picture Setting, and then press ENTER/CH LIST .
Select Contrast and then press ENTER/CH LIST .
Press to adjust the contrast.
3
Press EXIT/CANCEL to return to the normal screen.
After connecting a PC to your TV, you can now configure the display and audio settings.
To configure the display settings:
(1) Press MENU SETUP to display the Main Menu
screen.
(2) Press to select the Picture menu, and then press
ENTER/CH LIST .
(3) On the Picture menu, you can adjust various picture
properties such as brightness, contrast, sharpness,
colour, tint, colour temperature, backlight, and dynalight.
Note: Tint can be adjusted only when NTSC signal is
supported.
(4) For a list of available menu options in the Picture menu,
see page 29.
To configure the audio settings:
(1) Press MENU SETUP to display the Main Menu
screen.
(2) Press to select the Sound menu, and then press
ENTER/CH LIST .
(3) On the Sound menu, you can adjust the NICAM stereo
reception, and the bass, treble, balance, and sound
effects.
Note: NICAM is available only when the TV is set to ATV
mode.
(4) For a list of available menu options in the Sound menu,
see page 29.
TVBack side view
To PC/HDMI 1
AUDIO input
Audio cable
To HDMI input
VGA cable
HDMI-to-DVI cable
To DVI output
PC
TUNER
HDMI 1
YPbPrLRLR
VIDEO
PC MONITOR
HEAD PHONE
PC/
HDMI 1
AUDIO
DIGITAL AUDIO
OPTICAL
IN
IN
IN
OUT
SCART (AV1)
COMPONENTCOMPOSITE(AV2)
(All illustrated cables are not supplied.)
/
/
/
/
/
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 26DV733G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 26DV733G in the language / languages: English as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 26DV733G

Toshiba 26DV733G User Manual - German - 94 pages

Toshiba 26DV733G User Manual - French - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info