Manual Toshiba 23EL934G (page 13 of 41) (English)

526309

Zoom out

Zoom in

1/41

English

English - 12 -

Initial Installation

Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the

aerial is connected to your television. To set up the television, use the buttons on the remote control as detailed on page 7.

IMPORTANT: Ensure that the aerial or cable is

connected and a Common Interface module is not

inserted before switching on the TV for the ﬁ rst time

installation.

1. Connect the mains plug and switch the TV on using

the side standby switch. Then the initial setup wizard

will be displayed. This wizard will appear the ﬁ rst time

that the television is switched on and each time the

television is reset.

Welcome to use the Wizard for Initial Setup!!

Please press [OK] to start the wizard.

2. Press the OK button to start the wizard.

3. Select your preferred language by pressing the

button, then press OK or to enter the next step.

4. Select your country by pressing the

or button, then

press OK or

to enter the next step.

Note: If you select France or Italy, you will be asked to

set a password. Use the digit buttons to enter a

four-digit number for your password. (0000 is too

simple to be set as your password.) Re-enter the

same code to conﬁ rm the password. After that,

you will enter the next step automatically. (At this

step, you can only press the

button to return to

the previous step.)

5. Select your location by pressing the

or button,

then press OK or to enter the next step. The location

options include Home and Retail.

Select Home and press OK to enter the next step. Use

the

or button to select your Tuner mode Antenna

or Cable.

Select Antenna.

• Press OK or

to enter.

• Press or to select a scan type

Digital&Analogue, Digital or Analogue and press

OK or

to enter the next step.

• Press

or to select Scan or Skip Scan,

Select Scan, then press OK or

to automatically start

searching for all available channels.

Select Cable.

• Press OK or

to enter.

• Press or to select a scan type

Digital&Analogue, Digital or Analogue and press

OK or

to enter the next step.

• Press or to select Scan or Skip Scan,

Select Scan, then press OK or

to enter the below

step.

• Select Full if available to search for and store all

available channels.

• You may select Advanced, then conﬁ gure proper

cable information such as Frequency, Modulation,

symbol rate and Network ID. Use the digit buttons

to input the values of frequency, symbol rate and

network ID; use the

or button to select a

modulation mode.

• Press OK to start initial setup for all available

channels.

Note: The searching progress bar will move along the

line. You must allow the television to complete

the search. During the search, pressing EXIT

will interrupt the search halfway and go back to

the previous step.

6. You can also skip the initial setup process by selecting

Skip Scan.

7. During the setup, you can follow the hints available at

the bottom of the screen to return to the previous step

by pressing the

button.

8. After the initial setup ﬁ nishes, press OK to display the

channel list.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 23EL934G in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba 23EL934G

Toshiba 23EL934G User Manual - German - 42 pages

Toshiba 23EL934G User Manual - Dutch - 42 pages

Toshiba 23EL934G User Manual - French - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba 23EL934G Manual

Product: