66272
30
Zoom out
Zoom in
Previous page
1/64
Next page
30
EPG Timer
You can choose whether or not the screen switches on when the timer event begins - please see
page 18 (Rec screen status (LCD Power on/off)). This is so that if you are using the timer to make
a recording to your VCR or other device, the TV screen will not switch on unless you want it to.
If you try to switch to another channel while a timer event is in progress, the following message
will appear: ‘WARNING: CHANGING THE CHANNEL WILL INTERRUPT YOUR EVENT TIMER. ARE
YOU SURE YOU WANT TO PROCEED? YES/NO’. Select Yes or No according to your wishes.
Note:
When the EPG Timer starts, the
message “Event Timer Started” will
appear.
A maximum of eight Timers can be
programmed.
If the EPG Timer starts when it is
already switched on, it will start at the
exact time that is set. If it starts from
the standby mode, it will begin 20
seconds in advance of the stated time.
You cannot hasten the start time from
the original start time of the Event.
You cannot set with the same date
and time of another Event.
Press the Yellow
button
to change
the start time of the event.
Press the Blue
button
to change the
time duration of the event.
If the EPG Timer begins during
standby mode, the
(Power)
indicator on the unit will be lit in
orange. This is to indicate that an
EPG Timer event has begun in
standby mode.
When in power-off-condition, EPG
Timer cannot be activated.
1
Press GUIDE to display the Guide menu. Then press
/// to highlight the programme you want to set as a
timer event, then press ENTER.
Page - Page + Prev.Day Next Day
MNO
PQS
STU
TCM
VWXYZ
SAT.1
ARTE
DEF
671_MNO_10Step_0820_0100_0120_Audio2_0100_0120...
8002/80/02 nuS 671 MNO
01:00Channels
679_VWXYZ_Monosoo_0100_0300...
No Event Name
No Event Name
No Event Name
No Event Name
671_M...
672_PQR_SMPTE_col...
673_STU_SDTV... 673_STU_SDTV Moving...
672_PQR_SMPTE_col...
671_M...
671_MNO_10step
02:0001:30
Navigate
Enter Exit Guide
View Info
TV/Radio
Guide 16:50 Sun 20/08/2008 TV
Note:
If you select an event which has already started, the selected
program will be displayed on the screen, as you cannot set
the timer for a programme which has already started.
To display the stored timer events, press GUIDE twice.
The Event Timer menu (see step 3 below) will appear. You
can also delete or change the frequency (Once / Daily /
Weekly) of the stored timer events (but please note that
you cannot edit the time details that have been set from
the EPG).
2
The confirmation banner will be displayed.
Press or to select ‘Yes’ or ‘No’, then press ENTER (the
selected option is shown in blue).
3
The Event Timer menu will appear.
Press the Red button to set the Timer mode for a selected
event.
Event Timer
Navigate
Enter Exit
Service Name Mode Date Time Duration
BBC ONE Once 26/02/08 08:10 00:23
Timer mode
Delete Timer
Edit Timer Edit Duration
4
The Timer mode
specifies the
frequency of Timer
wake-up which can
be set as Once,
Daily or Weekly.
Press ENTER to
save the selected
Timer mode.
Event Timer
Service Name Mode Date
BBC ONE Once 26/02
/
Once
Daily
Weekly
Note:
To delete a timer event, select the specified event, then
press the Green
button
.
5
To return to the Guide menu, press DIGITAL MENU.
To clear the menu screen, press EXIT.
51Z0231A_ENG.indd 3051Z0231A_ENG.indd 30 9/16/08 3:28:57 PM9/16/08 3:28:57 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba 22DV555DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba 22DV555DG in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info