807525
120
Zoom out
Zoom in
Previous page
1/131
Next page
Care and service
DE EN
Propeller 1103 AC
7
11
8
9
12
10
Fig. 86: Propeller attachment for Ultralight 1103 A/AC
7Cylindrical pin 10 Hexagonal nut
8Propeller 11 Inner spring washer
9Outer spring washer 12 Motor shaft
1. Remove the cable between motor and battery.
2. Release the hexagonal nut (10) and outer spring washer (9).
3. Disconnect the propeller (8) from the motor shaft (12).
4. Pull off the cylindrical pin (7) and the inner spring washer (11) from the motor
shaft (12).
5. Connect the cable between motor and battery.
6. Check that the motor shaft is running concentrically.
7. Remove the cable between motor and battery.
8. Place the inner spring washer (11) onto the motor shaft (12).
The inner edge of the inner spring washer (11) is in contact with the motor
shaft flange.
9. Push the new cylindrical pin (7) into the motor shaft (12).
10. Slide the new propeller (8) onto the motor shaft (12) up to the stop.
11. Rotate the groove of the propeller (8) until it is congruent with the cylindrical pin
(7).
12. Push the outer spring washer (9) onto the motor shaft (12) behind the propeller
(8).
13. Hand-tighten the hexagonal nut (10) (11 Nm).
page 120 / 129
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Ultralight 1103 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Ultralight 1103 AC in the language / languages: English, German as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Ultralight 1103 AC

Torqeedo Ultralight 1103 AC User Manual - Dutch, French - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info