807525
92
Zoom out
Zoom in
Previous page
1/131
Next page
Start-up
DE EN
6. Push the control clamping ring (10), the motion link with quick clamp (2) and the
control triangle (1) together.
ADVICE
For the Ultralight 1103AC model, the assembly paste is used to increase the
friction of the control triangle on the shaft tube.
Under no circumstances should the assembly paste be used on the part of
the shaft tube positioned in the motion link.
7. Place the combination of control triangle (10), motion link with quick clamp (2)
and clamping ring (1) in the desired position.
The position of the motion link with quick clamp (2) determines the height
of the motor. The highest point of the propeller must be at least 5 cm below
the surface of the water. The height can also be adjusted at a later time, see
Chapter 6.3, "Setting for optimum depth of water".
ADVICE
Perform the alignment of the following components, as per "Fig. 63:
Combination of clamping ring, motion link and control triangle":
Clamping ring (10)
Motion link with quick clamp (2)
Control triangle (1)
The swing arm is alongside the propeller. The above components must be
aligned accordingly.
8. Tighten the clamping ring (10) using the already hand-tightened M5 screw (9) to
3.5 Nm (31 lb/in).
ADVICE
The swing arm (6) must be fixed in such a way that it can no longer move
freely.
9. Fix the clamping unit of the control triangle (5) with the quick clamp (4) so that
this fixes the motion link with quick clamp (2) between the clamping ring (10)
axially (3.5 Nm/31 lb/in).
6.2.3 Inserting the motion link in the bracket
1
2
3
Fig. 64: Motion link fitted
1Bracket with trim mechanism 3Motion link
2Quick clamp
1. Insert the motion link (3) through the quick clamp (2) into the bracket (1).
2. Close the quick clamp (2).
3. Check that the combination is fitted correctly.
page 92 / 129
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Ultralight 1103 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Ultralight 1103 AC in the language / languages: English, German as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Ultralight 1103 AC

Torqeedo Ultralight 1103 AC User Manual - Dutch, French - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info