807516
66
Zoom out
Zoom in
Previous page
1/92
Next page
66
DE EN
12
3
4
1. Prepare the boat for the installation of the battery main switch.
2. Position the battery main switch on the boat and secure it with M5 screws
(2), washers (3) and nuts (4). Make sure that the cables are pointing down-
wards.
3. IMPORTANT! After installation, set the main switch to the “Off” position and
secure it against unintentional operation by pulling off the switch
handle (1).
6.5 Installing and securing the batteries
During planning and installation, ensure that the batteries are securely fastened
at every stage.
Synchronising battery state of charge
If you use more than one battery in your Torqeedo system, you must charge each
battery to a state of charge of 100 % before installation and especially before
commissioning. This prevents high charge equalisation of the batteries during
wiring.
1. Charge each battery for at least 12 hours to ensure a state of charge of 100
%.
Installing batteries
Prepare the mounting location for the batteries and ensure that the intended
location
provides a at surface for mounting,
is protected against splash water,
is not in a wet environment such as bilges.
1. Place the battery in the designated location in the boat and use the desig-
nated points for attachment.
NOTE! For more information on the battery and mounting, see the battery oper-
ating manual.
6.6 Installing and xing other components
TIP! Use the appropriate drilling template for installation. You can nd the drilling
template in the Service Center at www.torqeedo.com.
1. Prepare your boat for the installation of the component.
2. Position the component on the boat and fasten it with appropriate attach-
ment material.
NOTE! For further information on the component and mounting, please refer to
the relevant operating manual.
6.7 Wiring
DANGER
Danger of injury or death from electric shock. This can result in sever injuries
or death.
Make sure that the overall system is de-energised during installation.
Batteries and external power sources must be disconnected from the
onboard power supply.
WARNING
Risk of injury from electrical voltage. This can result in moderate or severe
bodily injuries.
Power cables, data cables, plug connections and screw connections
must not be laid in wet areas (e.g. bilges).
Follow the connection sequence according to the work instructions.
Before wiring, make sure you have the correct wiring diagram. You can nd the
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 6.0 R-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 R-T in the language / languages: English, German as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 R-T

Torqeedo Cruise 6.0 R-T User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 R-T User Manual - French, Italian - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info