Manual Torqeedo Cruise 6.0 FP TorqLink (page 73 of 92) (English, German)

807536

Zoom out

Zoom in

1/92

DE EN

Charger unit

• Charger unit mounted in splash-proof manner.

• Charging cable of the charger unit correctly attached.

• Charger units properly connected and properly earthed.

External batteries

• Connect all power cables between the motor and the power busbar or

battery bank according to the respective connection diagram.

• Wiring, interconnection, and fusing of the battery bank carried out in accor-

dance with operating conditions and national laws and regulations.

• Power cable connected to components in correct polarity.

• Earthing of the external batteries correctly established and checked.

6.10 System test

DANGER

Danger of injury or death from rotating propeller. This can result in sever

injuries or death.

• No people or objects are allowed in the area of the propeller.

• Seal off the area against entry and remove objects.

NOTE! Material damage due to overheated components. The motor of the

Torqeedo system is only intended for operation in water. Prolonged turning of

the propeller on land or in the dry will cause component damage. The motor may

only be rotated for a short time for the system test to determine the direction of

rotation.

TIP! Ask someone to help you determine the direction of rotation of the propeller

during propulsion.

1. Make sure that the propeller can rotate freely.

2. Make sure that no persons or objects can get near the propeller.

3. Set the accelerator lever to the neutral position.

4. Remove the emergency stop magnetic chip (if present).

5. Set the emergency kill switch to the position for normal operation or con-

nect the kill switch cord to the kills witch (if present).

6. Switch on the battery main switch.

7. Switch on the system.

»The system starts within a few seconds and the display shows the main

menu.

8. Insert the emergency stop magnetic chip (if present).

9. Give a slight forward push.

»The propeller rotates clockwise.

10. Give a slight backward push.

»The propeller rotates counter-clockwise.

11. Set the accelerator lever to the neutral position and switch off the system.

12. Switch the battery main switch to the “OFF” position.

»System test was completed successfully.

NOTE! Correct Torqeedo propeller direction of rotation: clockwise, (direction of

rotation viewed from behind propeller: clockwise).

If the propeller turns in the wrong direction, carry out the following points:

1. Set forwards/reverse motion, see operating manual for the respective

accelerator lever.

If the system does not start as prescribed, check the following points and then

start the system test again:

• Battery main switch switched on?

• If necessary, is the emergency kill switch or kill switch in the position for

normal operation?

• Are the batteries sufciently charged?

• Are all data cables connected correctly?

• Are all power cables connected correctly?

• Have the fuses tripped (in the case of external batteries)?

If the system starts but the propeller does not turn despite being given propul-

sion, check the following points and then start the system test again:

• Is the emergency stop magnetic chip on or the kill switch in the position for

normal operation?

• Are all data cables connected correctly?

• Are all power cables connected correctly?

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 FP TorqLink in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 FP TorqLink

Torqeedo Cruise 6.0 FP TorqLink User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 FP TorqLink User Manual - French, Italian - 92 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Torqeedo Cruise 6.0 FP TorqLink Manual

Product: